plat: marvell: Add common ARMADA platform components
Add common Marvell ARMADA platform components.
This patch also includes common components for Marvell
ARMADA 8K platforms.
Change-Id: I42192fdc6525a42e46b3ac2ad63c83db9bcbfeaf
Signed-off-by: Hanna Hawa <hannah@marvell.com>
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
diff --git a/plat/marvell/common/marvell_bl31_setup.c b/plat/marvell/common/marvell_bl31_setup.c
new file mode 100644
index 0000000..a74816b
--- /dev/null
+++ b/plat/marvell/common/marvell_bl31_setup.c
@@ -0,0 +1,232 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <arch.h>
+#include <assert.h>
+#include <console.h>
+#include <debug.h>
+#include <marvell_def.h>
+#include <marvell_plat_priv.h>
+#include <plat_marvell.h>
+#include <platform.h>
+
+#ifdef USE_CCI
+#include <cci.h>
+#endif
+
+/*
+ * The next 3 constants identify the extents of the code, RO data region and the
+ * limit of the BL31 image. These addresses are used by the MMU setup code and
+ * therefore they must be page-aligned. It is the responsibility of the linker
+ * script to ensure that __RO_START__, __RO_END__ & __BL31_END__ linker symbols
+ * refer to page-aligned addresses.
+ */
+#define BL31_END (unsigned long)(&__BL31_END__)
+
+/*
+ * Placeholder variables for copying the arguments that have been passed to
+ * BL31 from BL2.
+ */
+static entry_point_info_t bl32_image_ep_info;
+static entry_point_info_t bl33_image_ep_info;
+
+/* Weak definitions may be overridden in specific ARM standard platform */
+#pragma weak bl31_early_platform_setup
+#pragma weak bl31_platform_setup
+#pragma weak bl31_plat_arch_setup
+#pragma weak bl31_plat_get_next_image_ep_info
+#pragma weak plat_get_syscnt_freq2
+
+/*****************************************************************************
+ * Return a pointer to the 'entry_point_info' structure of the next image for
+ * the security state specified. BL33 corresponds to the non-secure image type
+ * while BL32 corresponds to the secure image type. A NULL pointer is returned
+ * if the image does not exist.
+ *****************************************************************************
+ */
+entry_point_info_t *bl31_plat_get_next_image_ep_info(uint32_t type)
+{
+ entry_point_info_t *next_image_info;
+
+ assert(sec_state_is_valid(type));
+ next_image_info = (type == NON_SECURE)
+ ? &bl33_image_ep_info : &bl32_image_ep_info;
+
+ return next_image_info;
+}
+
+/*****************************************************************************
+ * Perform any BL31 early platform setup common to ARM standard platforms.
+ * Here is an opportunity to copy parameters passed by the calling EL (S-EL1
+ * in BL2 & S-EL3 in BL1) before they are lost (potentially). This needs to be
+ * done before the MMU is initialized so that the memory layout can be used
+ * while creating page tables. BL2 has flushed this information to memory, so
+ * we are guaranteed to pick up good data.
+ *****************************************************************************
+ */
+void marvell_bl31_early_platform_setup(bl31_params_t *from_bl2,
+ void *plat_params_from_bl2)
+{
+ /* Initialize the console to provide early debug support */
+ console_init(PLAT_MARVELL_BOOT_UART_BASE,
+ PLAT_MARVELL_BOOT_UART_CLK_IN_HZ,
+ MARVELL_CONSOLE_BAUDRATE);
+
+#if RESET_TO_BL31
+ /* There are no parameters from BL2 if BL31 is a reset vector */
+ assert(from_bl2 == NULL);
+ assert(plat_params_from_bl2 == NULL);
+
+#ifdef BL32_BASE
+ /* Populate entry point information for BL32 */
+ SET_PARAM_HEAD(&bl32_image_ep_info,
+ PARAM_EP,
+ VERSION_1,
+ 0);
+ SET_SECURITY_STATE(bl32_image_ep_info.h.attr, SECURE);
+ bl32_image_ep_info.pc = BL32_BASE;
+ bl32_image_ep_info.spsr = marvell_get_spsr_for_bl32_entry();
+#endif /* BL32_BASE */
+
+ /* Populate entry point information for BL33 */
+ SET_PARAM_HEAD(&bl33_image_ep_info,
+ PARAM_EP,
+ VERSION_1,
+ 0);
+ /*
+ * Tell BL31 where the non-trusted software image
+ * is located and the entry state information
+ */
+ bl33_image_ep_info.pc = plat_get_ns_image_entrypoint();
+ bl33_image_ep_info.spsr = marvell_get_spsr_for_bl33_entry();
+ SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE);
+
+#else
+ /*
+ * Check params passed from BL2 should not be NULL,
+ */
+ assert(from_bl2 != NULL);
+ assert(from_bl2->h.type == PARAM_BL31);
+ assert(from_bl2->h.version >= VERSION_1);
+ /*
+ * In debug builds, we pass a special value in 'plat_params_from_bl2'
+ * to verify platform parameters from BL2 to BL31.
+ * In release builds, it's not used.
+ */
+ assert(((unsigned long long)plat_params_from_bl2) ==
+ MARVELL_BL31_PLAT_PARAM_VAL);
+
+ /*
+ * Copy BL32 (if populated by BL2) and BL33 entry point information.
+ * They are stored in Secure RAM, in BL2's address space.
+ */
+ if (from_bl2->bl32_ep_info)
+ bl32_image_ep_info = *from_bl2->bl32_ep_info;
+ bl33_image_ep_info = *from_bl2->bl33_ep_info;
+#endif
+}
+
+void bl31_early_platform_setup(bl31_params_t *from_bl2,
+ void *plat_params_from_bl2)
+{
+ marvell_bl31_early_platform_setup(from_bl2, plat_params_from_bl2);
+
+#ifdef USE_CCI
+ /*
+ * Initialize CCI for this cluster during cold boot.
+ * No need for locks as no other CPU is active.
+ */
+ plat_marvell_interconnect_init();
+
+ /*
+ * Enable CCI coherency for the primary CPU's cluster.
+ * Platform specific PSCI code will enable coherency for other
+ * clusters.
+ */
+ plat_marvell_interconnect_enter_coherency();
+#endif
+}
+
+/*****************************************************************************
+ * Perform any BL31 platform setup common to ARM standard platforms
+ *****************************************************************************
+ */
+void marvell_bl31_platform_setup(void)
+{
+ /* Initialize the GIC driver, cpu and distributor interfaces */
+ plat_marvell_gic_driver_init();
+ plat_marvell_gic_init();
+
+ /* For Armada-8k-plus family, the SoC includes more than
+ * a single AP die, but the default die that boots is AP #0.
+ * For other families there is only one die (#0).
+ * Initialize psci arch from die 0
+ */
+ marvell_psci_arch_init(0);
+}
+
+/*****************************************************************************
+ * Perform any BL31 platform runtime setup prior to BL31 exit common to ARM
+ * standard platforms
+ *****************************************************************************
+ */
+void marvell_bl31_plat_runtime_setup(void)
+{
+ /* Initialize the runtime console */
+ console_init(PLAT_MARVELL_BL31_RUN_UART_BASE,
+ PLAT_MARVELL_BL31_RUN_UART_CLK_IN_HZ,
+ MARVELL_CONSOLE_BAUDRATE);
+}
+
+void bl31_platform_setup(void)
+{
+ marvell_bl31_platform_setup();
+}
+
+void bl31_plat_runtime_setup(void)
+{
+ marvell_bl31_plat_runtime_setup();
+}
+
+/*****************************************************************************
+ * Perform the very early platform specific architectural setup shared between
+ * ARM standard platforms. This only does basic initialization. Later
+ * architectural setup (bl31_arch_setup()) does not do anything platform
+ * specific.
+ *****************************************************************************
+ */
+void marvell_bl31_plat_arch_setup(void)
+{
+ marvell_setup_page_tables(BL31_BASE,
+ BL31_END - BL31_BASE,
+ BL_CODE_BASE,
+ BL_CODE_END,
+ BL_RO_DATA_BASE,
+ BL_RO_DATA_END
+#if USE_COHERENT_MEM
+ , BL_COHERENT_RAM_BASE,
+ BL_COHERENT_RAM_END
+#endif
+ );
+
+#if BL31_CACHE_DISABLE
+ enable_mmu_el3(DISABLE_DCACHE);
+ INFO("Cache is disabled in BL3\n");
+#else
+ enable_mmu_el3(0);
+#endif
+}
+
+void bl31_plat_arch_setup(void)
+{
+ marvell_bl31_plat_arch_setup();
+}
+
+unsigned int plat_get_syscnt_freq2(void)
+{
+ return PLAT_REF_CLK_IN_HZ;
+}