diff --git a/plat/marvell/a8k/common/mss/mss_a8k.mk b/plat/marvell/a8k/common/mss/mss_a8k.mk
new file mode 100644
index 0000000..58f23d8
--- /dev/null
+++ b/plat/marvell/a8k/common/mss/mss_a8k.mk
@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2018 Marvell International Ltd.
+#
+# SPDX-License-Identifier:	BSD-3-Clause
+# https://spdx.org/licenses
+#
+
+PLAT_MARVELL		:=	plat/marvell
+A8K_MSS_SOURCE		:=	$(PLAT_MARVELL)/a8k/common/mss
+
+BL2_SOURCES		+=	$(A8K_MSS_SOURCE)/mss_bl2_setup.c
+
+BL31_SOURCES		+=	$(A8K_MSS_SOURCE)/mss_pm_ipc.c
+
+PLAT_INCLUDES		+=	-I$(A8K_MSS_SOURCE)
+
+ifneq (${SCP_BL2},)
+# This define is used to inidcate the SCP image is present
+$(eval $(call add_define,SCP_IMAGE))
+endif
diff --git a/plat/marvell/a8k/common/mss/mss_bl2_setup.c b/plat/marvell/a8k/common/mss/mss_bl2_setup.c
new file mode 100644
index 0000000..6688551
--- /dev/null
+++ b/plat/marvell/a8k/common/mss/mss_bl2_setup.c
@@ -0,0 +1,144 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <a8k_common.h>
+#include <bl_common.h>
+#include <ccu.h>
+#include <cp110_setup.h>
+#include <debug.h>
+#include <marvell_plat_priv.h> /* timer functionality */
+#include <mmio.h>
+#include <platform_def.h>
+
+#include "mss_scp_bootloader.h"
+
+/* IO windows configuration */
+#define IOW_GCR_OFFSET		(0x70)
+
+/* MSS windows configuration */
+#define MSS_AEBR(base)			(base + 0x160)
+#define MSS_AIBR(base)			(base + 0x164)
+#define MSS_AEBR_MASK			0xFFF
+#define MSS_AIBR_MASK			0xFFF
+
+#define MSS_EXTERNAL_SPACE		0x50000000
+#define MSS_EXTERNAL_ACCESS_BIT		28
+#define MSS_EXTERNAL_ADDR_MASK		0xfffffff
+#define MSS_INTERNAL_ACCESS_BIT		28
+
+struct addr_map_win ccu_mem_map[] = {
+	{MVEBU_CP_REGS_BASE(0), 0x4000000, IO_0_TID}
+};
+
+/* Since the scp_bl2 image can contain firmware for cp1 and cp0 coprocessors,
+ * the access to cp0 and cp1 need to be provided. More precisely it is
+ * required to:
+ *  - get the information about device id which is stored in CP0 registers
+ *    (to distinguish between cases where we have cp0 and cp1 or standalone cp0)
+ *  - get the access to cp which is needed for loading fw for cp0/cp1
+ *    coprocessors
+ * This function configures ccu windows accordingly.
+ *
+ * Note: there is no need to restore previous ccu configuration, since in next
+ * phase (BL31) the init_ccu will be called (via apn806_init/
+ * bl31_plat_arch_setu) and therefore the ccu configuration will be overwritten.
+ */
+static int bl2_plat_mmap_init(void)
+{
+	int cfg_num, win_id, cfg_idx;
+
+	cfg_num =  ARRAY_SIZE(ccu_mem_map);
+
+	/* CCU window-0 should not be counted - it's already used */
+	if (cfg_num > (MVEBU_CCU_MAX_WINS - 1)) {
+		ERROR("BL2: %s: trying to open too many windows\n", __func__);
+		return -1;
+	}
+
+	/* Enable required CCU windows
+	 * Do not touch CCU window 0,
+	 * it's used for the internal registers access
+	 */
+	for (cfg_idx = 0, win_id = 1; cfg_idx < cfg_num; cfg_idx++, win_id++) {
+		/* Enable required CCU windows */
+		ccu_win_check(&ccu_mem_map[cfg_idx]);
+		ccu_enable_win(MVEBU_AP0, &ccu_mem_map[cfg_idx], win_id);
+	}
+
+	/* Set the default target id to PIDI */
+	mmio_write_32(MVEBU_IO_WIN_BASE(MVEBU_AP0) + IOW_GCR_OFFSET, PIDI_TID);
+
+	return 0;
+}
+
+/*****************************************************************************
+ * Transfer SCP_BL2 from Trusted RAM using the SCP Download protocol.
+ * Return 0 on success, -1 otherwise.
+ *****************************************************************************
+ */
+int bl2_plat_handle_scp_bl2(image_info_t *scp_bl2_image_info)
+{
+	int ret;
+
+	INFO("BL2: Initiating SCP_BL2 transfer to SCP\n");
+	printf("BL2: Initiating SCP_BL2 transfer to SCP\n");
+
+	/* initialize time (for delay functionality) */
+	plat_delay_timer_init();
+
+	ret = bl2_plat_mmap_init();
+	if (ret != 0)
+		return ret;
+
+	ret = scp_bootloader_transfer((void *)scp_bl2_image_info->image_base,
+		scp_bl2_image_info->image_size);
+
+	if (ret == 0)
+		INFO("BL2: SCP_BL2 transferred to SCP\n");
+	else
+		ERROR("BL2: SCP_BL2 transfer failure\n");
+
+	return ret;
+}
+
+uintptr_t bl2_plat_get_cp_mss_regs(int ap_idx, int cp_idx)
+{
+	return MVEBU_CP_REGS_BASE(cp_idx) + 0x280000;
+}
+
+uintptr_t bl2_plat_get_ap_mss_regs(int ap_idx)
+{
+	return MVEBU_REGS_BASE + 0x580000;
+}
+
+uint32_t bl2_plat_get_cp_count(int ap_idx)
+{
+	uint32_t revision = cp110_device_id_get(MVEBU_CP_REGS_BASE(0));
+	/* A8040: two CPs.
+	 * A7040: one CP.
+	 */
+	if (revision == MVEBU_80X0_DEV_ID ||
+	    revision == MVEBU_80X0_CP115_DEV_ID)
+		return 2;
+	else
+		return 1;
+}
+
+uint32_t bl2_plat_get_ap_count(void)
+{
+	/* A8040 and A7040 have only one AP */
+	return 1;
+}
+
+void bl2_plat_configure_mss_windows(uintptr_t mss_regs)
+{
+	/* set AXI External and Internal Address Bus extension */
+	mmio_write_32(MSS_AEBR(mss_regs),
+		      ((0x0 >> MSS_EXTERNAL_ACCESS_BIT) & MSS_AEBR_MASK));
+	mmio_write_32(MSS_AIBR(mss_regs),
+		      ((mss_regs >> MSS_INTERNAL_ACCESS_BIT) & MSS_AIBR_MASK));
+}
diff --git a/plat/marvell/a8k/common/mss/mss_pm_ipc.c b/plat/marvell/a8k/common/mss/mss_pm_ipc.c
new file mode 100644
index 0000000..6ff4abc
--- /dev/null
+++ b/plat/marvell/a8k/common/mss/mss_pm_ipc.c
@@ -0,0 +1,84 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <debug.h>
+#include <mmio.h>
+#include <psci.h>
+#include <string.h>
+
+#include <mss_pm_ipc.h>
+
+/*
+ * SISR is 32 bit interrupt register representing 32 interrupts
+ *
+ * +======+=============+=============+
+ * + Bits + 31          + 30 - 00     +
+ * +======+=============+=============+
+ * + Desc + MSS Msg Int + Reserved    +
+ * +======+=============+=============+
+ */
+#define MSS_SISR		(MVEBU_REGS_BASE + 0x5800D0)
+#define MSS_SISTR		(MVEBU_REGS_BASE + 0x5800D8)
+
+#define MSS_MSG_INT_MASK	(0x80000000)
+#define MSS_TIMER_BASE		(MVEBU_REGS_BASE_MASK + 0x580110)
+#define MSS_TRIGGER_TIMEOUT	(1000)
+
+/*****************************************************************************
+ * mss_pm_ipc_msg_send
+ *
+ * DESCRIPTION: create and transmit IPC message
+ *****************************************************************************
+ */
+int mss_pm_ipc_msg_send(unsigned int channel_id, unsigned int msg_id,
+			const psci_power_state_t *target_state)
+{
+	/* Transmit IPC message */
+#ifndef DISABLE_CLUSTER_LEVEL
+	mv_pm_ipc_msg_tx(channel_id, msg_id,
+			 (unsigned int)target_state->pwr_domain_state[
+					MPIDR_AFFLVL1]);
+#else
+	mv_pm_ipc_msg_tx(channel_id, msg_id, 0);
+#endif
+
+	return 0;
+}
+
+/*****************************************************************************
+ * mss_pm_ipc_msg_trigger
+ *
+ * DESCRIPTION: Trigger IPC message interrupt to MSS
+ *****************************************************************************
+ */
+int mss_pm_ipc_msg_trigger(void)
+{
+	unsigned int timeout;
+	unsigned int t_end;
+	unsigned int t_start = mmio_read_32(MSS_TIMER_BASE);
+
+	mmio_write_32(MSS_SISR, MSS_MSG_INT_MASK);
+
+	do {
+		/* wait while SCP process incoming interrupt */
+		if (mmio_read_32(MSS_SISTR) != MSS_MSG_INT_MASK)
+			break;
+
+		/* check timeout */
+		t_end = mmio_read_32(MSS_TIMER_BASE);
+
+		timeout = ((t_start > t_end) ?
+			   (t_start - t_end) : (t_end - t_start));
+		if (timeout > MSS_TRIGGER_TIMEOUT) {
+			ERROR("PM MSG Trigger Timeout\n");
+			break;
+		}
+
+	} while (1);
+
+	return 0;
+}
diff --git a/plat/marvell/a8k/common/mss/mss_pm_ipc.h b/plat/marvell/a8k/common/mss/mss_pm_ipc.h
new file mode 100644
index 0000000..0f69457
--- /dev/null
+++ b/plat/marvell/a8k/common/mss/mss_pm_ipc.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __MSS_PM_IPC_H
+#define __MSS_PM_IPC_H
+
+#include <mss_ipc_drv.h>
+
+/* Currently MSS does not support Cluster level Power Down */
+#define DISABLE_CLUSTER_LEVEL
+
+
+/*****************************************************************************
+ * mss_pm_ipc_msg_send
+ *
+ * DESCRIPTION: create and transmit IPC message
+ *****************************************************************************
+ */
+int mss_pm_ipc_msg_send(unsigned int channel_id, unsigned int msg_id,
+			const psci_power_state_t *target_state);
+
+/*****************************************************************************
+ * mss_pm_ipc_msg_trigger
+ *
+ * DESCRIPTION: Trigger IPC message interrupt to MSS
+ *****************************************************************************
+ */
+int mss_pm_ipc_msg_trigger(void);
+
+
+#endif /* __MSS_PM_IPC_H */