diff --git a/include/drivers/marvell/aro.h b/include/drivers/marvell/aro.h
new file mode 100644
index 0000000..3627a20
--- /dev/null
+++ b/include/drivers/marvell/aro.h
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2017 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+#ifndef _ARO_H_
+#define _ARO_H_
+
+enum hws_freq {
+	CPU_FREQ_2000,
+	CPU_FREQ_1800,
+	CPU_FREQ_1600,
+	CPU_FREQ_1400,
+	CPU_FREQ_1300,
+	CPU_FREQ_1200,
+	CPU_FREQ_1000,
+	CPU_FREQ_600,
+	CPU_FREQ_800,
+	DDR_FREQ_LAST,
+	DDR_FREQ_SAR
+};
+
+enum cpu_clock_freq_mode {
+	CPU_2000_DDR_1200_RCLK_1200 = 0x0,
+	CPU_2000_DDR_1050_RCLK_1050 = 0x1,
+	CPU_1600_DDR_800_RCLK_800   = 0x4,
+	CPU_1800_DDR_1200_RCLK_1200 = 0x6,
+	CPU_1800_DDR_1050_RCLK_1050 = 0x7,
+	CPU_1600_DDR_900_RCLK_900   = 0x0B,
+	CPU_1600_DDR_1050_RCLK_1050 = 0x0D,
+	CPU_1600_DDR_900_RCLK_900_2 = 0x0E,
+	CPU_1000_DDR_650_RCLK_650   = 0x13,
+	CPU_1300_DDR_800_RCLK_800   = 0x14,
+	CPU_1300_DDR_650_RCLK_650   = 0x17,
+	CPU_1200_DDR_800_RCLK_800   = 0x19,
+	CPU_1400_DDR_800_RCLK_800   = 0x1a,
+	CPU_600_DDR_800_RCLK_800    = 0x1B,
+	CPU_800_DDR_800_RCLK_800    = 0x1C,
+	CPU_1000_DDR_800_RCLK_800   = 0x1D,
+	CPU_DDR_RCLK_INVALID
+};
+
+int init_aro(void);
+
+#endif /* _ARO_H_ */
diff --git a/include/plat/marvell/a8k/common/a8k_common.h b/include/plat/marvell/a8k/common/a8k_common.h
new file mode 100644
index 0000000..e727467
--- /dev/null
+++ b/include/plat/marvell/a8k/common/a8k_common.h
@@ -0,0 +1,128 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __A8K_COMMON_H__
+#define __A8K_COMMON_H__
+
+#include <amb_adec.h>
+#include <io_win.h>
+#include <iob.h>
+#include <ccu.h>
+
+/*
+ * This struct supports skip image request
+ * detection_method: the method used to detect the request "signal".
+ * info:
+ *	GPIO:
+ *		detection_method: HIGH (pressed button), LOW (unpressed button),
+ *		num (button mpp number).
+ *	i2c:
+ *		i2c_addr: the address of the i2c chosen.
+ *		i2d_reg: the i2c register chosen.
+ *	test:
+ *		choose the DIE you picked the button in (AP or CP).
+ *		in case of CP(cp_index = 0 if CP0, cp_index = 1 if CP1)
+ */
+struct skip_image {
+	enum {
+		GPIO,
+		I2C,
+		USER_DEFINED
+	} detection_method;
+
+	struct {
+		struct {
+			int num;
+			enum {
+				HIGH,
+				LOW
+			} button_state;
+
+		} gpio;
+
+		struct {
+			int i2c_addr;
+			int i2c_reg;
+		} i2c;
+
+		struct {
+			enum {
+				CP,
+				AP
+			} cp_ap;
+			int cp_index;
+		} test;
+	} info;
+};
+
+/*
+ * This struct supports SoC power off method
+ * type: the method used to power off the SoC
+ * cfg:
+ *	PMIC_GPIO:
+ *	pin_count: current GPIO pin number used for toggling the signal for
+ *		   notifying external PMIC
+ *	info:	   holds the GPIOs information, CP GPIO should be used and
+ *		   all GPIOs should be within same GPIO config. register
+ *	step_count: current step number to toggle the GPIO for PMIC
+ *	seq:       GPIO toggling values in sequence, each bit represents a GPIO.
+ *		   For example, bit0 represents first GPIO used for toggling
+ *		   the GPIO the last step is used to trigger the power off
+ *		   signal
+ *	delay_ms:  transition interval for the GPIO setting to take effect
+ *		   in unit of ms
+ */
+/* Max GPIO number used to notify PMIC to power off the SoC */
+#define PMIC_GPIO_MAX_NUMBER		8
+/* Max GPIO toggling steps in sequence to power off the SoC */
+#define PMIC_GPIO_MAX_TOGGLE_STEP	8
+
+enum gpio_output_state {
+	GPIO_LOW = 0,
+	GPIO_HIGH
+};
+
+typedef struct gpio_info {
+	int cp_index;
+	int gpio_index;
+} gpio_info_t;
+
+struct power_off_method {
+	enum {
+		PMIC_GPIO,
+	} type;
+
+	struct {
+		struct {
+			int pin_count;
+			struct gpio_info info[PMIC_GPIO_MAX_NUMBER];
+			int step_count;
+			uint32_t seq[PMIC_GPIO_MAX_TOGGLE_STEP];
+			int delay_ms;
+		} gpio;
+	} cfg;
+};
+
+int marvell_gpio_config(void);
+uint32_t marvell_get_io_win_gcr_target(int ap_idx);
+uint32_t marvell_get_ccu_gcr_target(int ap_idx);
+
+
+/*
+ * The functions below are defined as Weak and may be overridden
+ * in specific Marvell standard platform
+ */
+int marvell_get_amb_memory_map(struct addr_map_win **win,
+			       uint32_t *size, uintptr_t base);
+int marvell_get_io_win_memory_map(int ap_idx, struct addr_map_win **win,
+				  uint32_t *size);
+int marvell_get_iob_memory_map(struct addr_map_win **win,
+			       uint32_t *size, uintptr_t base);
+int marvell_get_ccu_memory_map(int ap_idx, struct addr_map_win **win,
+			       uint32_t *size);
+
+#endif /* __A8K_COMMON_H__ */
diff --git a/include/plat/marvell/a8k/common/board_marvell_def.h b/include/plat/marvell/a8k/common/board_marvell_def.h
new file mode 100644
index 0000000..b1054db
--- /dev/null
+++ b/include/plat/marvell/a8k/common/board_marvell_def.h
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __BOARD_MARVELL_DEF_H__
+#define __BOARD_MARVELL_DEF_H__
+
+/*
+ * Required platform porting definitions common to all ARM
+ * development platforms
+ */
+
+/* Size of cacheable stacks */
+#if DEBUG_XLAT_TABLE
+# define PLATFORM_STACK_SIZE 0x800
+#elif IMAGE_BL1
+#if TRUSTED_BOARD_BOOT
+# define PLATFORM_STACK_SIZE 0x1000
+#else
+# define PLATFORM_STACK_SIZE 0x440
+#endif
+#elif IMAGE_BL2
+# if TRUSTED_BOARD_BOOT
+#  define PLATFORM_STACK_SIZE 0x1000
+# else
+#  define PLATFORM_STACK_SIZE 0x400
+# endif
+#elif IMAGE_BL31
+# define PLATFORM_STACK_SIZE 0x400
+#elif IMAGE_BL32
+# define PLATFORM_STACK_SIZE 0x440
+#endif
+
+/*
+ * PLAT_MARVELL_MMAP_ENTRIES depends on the number of entries in the
+ * plat_arm_mmap array defined for each BL stage.
+ */
+#if IMAGE_BLE
+#  define PLAT_MARVELL_MMAP_ENTRIES	3
+#endif
+#if IMAGE_BL1
+#  if TRUSTED_BOARD_BOOT
+#   define PLAT_MARVELL_MMAP_ENTRIES	7
+#  else
+#   define PLAT_MARVELL_MMAP_ENTRIES	6
+#  endif	/* TRUSTED_BOARD_BOOT */
+#endif
+#if IMAGE_BL2
+#  define PLAT_MARVELL_MMAP_ENTRIES		8
+#endif
+#if IMAGE_BL31
+#define PLAT_MARVELL_MMAP_ENTRIES		5
+#endif
+
+/*
+ * Platform specific page table and MMU setup constants
+ */
+#if IMAGE_BL1
+#define MAX_XLAT_TABLES			4
+#elif IMAGE_BLE
+#  define MAX_XLAT_TABLES		4
+#elif IMAGE_BL2
+#  define MAX_XLAT_TABLES		4
+#elif IMAGE_BL31
+# define MAX_XLAT_TABLES		4
+#elif IMAGE_BL32
+#  define MAX_XLAT_TABLES               4
+#endif
+
+#define MAX_IO_DEVICES			3
+#define MAX_IO_HANDLES			4
+
+#define PLAT_MARVELL_TRUSTED_SRAM_SIZE	0x80000	/* 512 KB */
+
+
+#endif /* __BOARD_MARVELL_DEF_H__ */
diff --git a/include/plat/marvell/a8k/common/marvell_def.h b/include/plat/marvell/a8k/common/marvell_def.h
new file mode 100644
index 0000000..7dacf82
--- /dev/null
+++ b/include/plat/marvell/a8k/common/marvell_def.h
@@ -0,0 +1,180 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __MARVELL_DEF_H__
+#define __MARVELL_DEF_H__
+
+#include <arch.h>
+#include <common_def.h>
+#include <platform_def.h>
+#include <tbbr_img_def.h>
+#include <xlat_tables.h>
+
+
+/******************************************************************************
+ * Definitions common to all MARVELL standard platforms
+ *****************************************************************************/
+
+/* Special value used to verify platform parameters from BL2 to BL31 */
+#define MARVELL_BL31_PLAT_PARAM_VAL		0x0f1e2d3c4b5a6978ULL
+
+
+#define MARVELL_CACHE_WRITEBACK_SHIFT	6
+
+/*
+ * Macros mapping the MPIDR Affinity levels to MARVELL Platform Power levels.
+ * The power levels have a 1:1 mapping with the MPIDR affinity levels.
+ */
+#define MARVELL_PWR_LVL0		MPIDR_AFFLVL0
+#define MARVELL_PWR_LVL1		MPIDR_AFFLVL1
+#define MARVELL_PWR_LVL2		MPIDR_AFFLVL2
+
+/*
+ *  Macros for local power states in Marvell platforms encoded by
+ *  State-ID field within the power-state parameter.
+ */
+/* Local power state for power domains in Run state. */
+#define MARVELL_LOCAL_STATE_RUN	0
+/* Local power state for retention. Valid only for CPU power domains */
+#define MARVELL_LOCAL_STATE_RET	1
+/*
+ * Local power state for OFF/power-down. Valid for CPU
+ * and cluster power domains
+ */
+#define MARVELL_LOCAL_STATE_OFF	2
+
+/* The first 4KB of Trusted SRAM are used as shared memory */
+#define MARVELL_TRUSTED_SRAM_BASE	PLAT_MARVELL_ATF_BASE
+#define MARVELL_SHARED_RAM_BASE		MARVELL_TRUSTED_SRAM_BASE
+#define MARVELL_SHARED_RAM_SIZE		0x00001000	/* 4 KB */
+
+/* The remaining Trusted SRAM is used to load the BL images */
+#define MARVELL_BL_RAM_BASE		(MARVELL_SHARED_RAM_BASE +	\
+					 MARVELL_SHARED_RAM_SIZE)
+#define MARVELL_BL_RAM_SIZE		(PLAT_MARVELL_TRUSTED_SRAM_SIZE - \
+					 MARVELL_SHARED_RAM_SIZE)
+/* Non-shared DRAM */
+#define MARVELL_DRAM_BASE		ULL(0x0)
+#define MARVELL_DRAM_SIZE		ULL(0x80000000)
+#define MARVELL_DRAM_END		(MARVELL_DRAM_BASE + \
+					 MARVELL_DRAM_SIZE - 1)
+
+#define MARVELL_IRQ_SEC_PHY_TIMER	29
+
+#define MARVELL_IRQ_SEC_SGI_0		8
+#define MARVELL_IRQ_SEC_SGI_1		9
+#define MARVELL_IRQ_SEC_SGI_2		10
+#define MARVELL_IRQ_SEC_SGI_3		11
+#define MARVELL_IRQ_SEC_SGI_4		12
+#define MARVELL_IRQ_SEC_SGI_5		13
+#define MARVELL_IRQ_SEC_SGI_6		14
+#define MARVELL_IRQ_SEC_SGI_7		15
+
+#define MARVELL_MAP_SHARED_RAM		MAP_REGION_FLAT(		\
+						MARVELL_SHARED_RAM_BASE,\
+						MARVELL_SHARED_RAM_SIZE,\
+						MT_MEMORY | MT_RW | MT_SECURE)
+
+#define MARVELL_MAP_DRAM		MAP_REGION_FLAT(		\
+						MARVELL_DRAM_BASE,	\
+						MARVELL_DRAM_SIZE,	\
+						MT_MEMORY | MT_RW | MT_NS)
+
+
+/*
+ * The number of regions like RO(code), coherent and data required by
+ * different BL stages which need to be mapped in the MMU.
+ */
+#if USE_COHERENT_MEM
+#define MARVELL_BL_REGIONS		3
+#else
+#define MARVELL_BL_REGIONS		2
+#endif
+
+#define MAX_MMAP_REGIONS		(PLAT_MARVELL_MMAP_ENTRIES +	\
+					 MARVELL_BL_REGIONS)
+
+#define MARVELL_CONSOLE_BAUDRATE	115200
+
+/******************************************************************************
+ * Required platform porting definitions common to all MARVELL std. platforms
+ *****************************************************************************/
+
+#define PLAT_PHY_ADDR_SPACE_SIZE	(1ULL << 32)
+#define PLAT_VIRT_ADDR_SPACE_SIZE	(1ULL << 32)
+
+/*
+ * This macro defines the deepest retention state possible. A higher state
+ * id will represent an invalid or a power down state.
+ */
+#define PLAT_MAX_RET_STATE		MARVELL_LOCAL_STATE_RET
+
+/*
+ * This macro defines the deepest power down states possible. Any state ID
+ * higher than this is invalid.
+ */
+#define PLAT_MAX_OFF_STATE		MARVELL_LOCAL_STATE_OFF
+
+
+#define PLATFORM_CORE_COUNT		PLAT_MARVELL_CORE_COUNT
+#define PLAT_NUM_PWR_DOMAINS		(PLAT_MARVELL_CLUSTER_COUNT +	\
+					 PLATFORM_CORE_COUNT)
+
+/*
+ * Some data must be aligned on the biggest cache line size in the platform.
+ * This is known only to the platform as it might have a combination of
+ * integrated and external caches.
+ */
+#define CACHE_WRITEBACK_GRANULE		(1 << MARVELL_CACHE_WRITEBACK_SHIFT)
+
+
+/*******************************************************************************
+ * BL1 specific defines.
+ * BL1 RW data is relocated from ROM to RAM at runtime so we need 2 sets of
+ * addresses.
+ ******************************************************************************/
+#define BL1_RO_BASE			PLAT_MARVELL_TRUSTED_ROM_BASE
+#define BL1_RO_LIMIT			(PLAT_MARVELL_TRUSTED_ROM_BASE	\
+					 + PLAT_MARVELL_TRUSTED_ROM_SIZE)
+/*
+ * Put BL1 RW at the top of the Trusted SRAM.
+ */
+#define BL1_RW_BASE		(MARVELL_BL_RAM_BASE +		\
+					MARVELL_BL_RAM_SIZE -	\
+					PLAT_MARVELL_MAX_BL1_RW_SIZE)
+#define BL1_RW_LIMIT		(MARVELL_BL_RAM_BASE + MARVELL_BL_RAM_SIZE)
+
+/*******************************************************************************
+ * BLE specific defines.
+ ******************************************************************************/
+#define BLE_BASE			PLAT_MARVELL_SRAM_BASE
+#define BLE_LIMIT			PLAT_MARVELL_SRAM_END
+
+/*******************************************************************************
+ * BL2 specific defines.
+ ******************************************************************************/
+/*
+ * Put BL2 just below BL31.
+ */
+#define BL2_BASE			(BL31_BASE - PLAT_MARVELL_MAX_BL2_SIZE)
+#define BL2_LIMIT			BL31_BASE
+
+/*******************************************************************************
+ * BL31 specific defines.
+ ******************************************************************************/
+/*
+ * Put BL31 at the top of the Trusted SRAM.
+ */
+#define BL31_BASE			(MARVELL_BL_RAM_BASE +		\
+						MARVELL_BL_RAM_SIZE -	\
+						PLAT_MARVEL_MAX_BL31_SIZE)
+#define BL31_PROGBITS_LIMIT		BL1_RW_BASE
+#define BL31_LIMIT			(MARVELL_BL_RAM_BASE +	\
+					 MARVELL_BL_RAM_SIZE)
+
+
+#endif /* __MARVELL_DEF_H__ */
diff --git a/include/plat/marvell/a8k/common/plat_marvell.h b/include/plat/marvell/a8k/common/plat_marvell.h
new file mode 100644
index 0000000..aad5da7
--- /dev/null
+++ b/include/plat/marvell/a8k/common/plat_marvell.h
@@ -0,0 +1,109 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __PLAT_MARVELL_H__
+#define __PLAT_MARVELL_H__
+
+#include <cassert.h>
+#include <cpu_data.h>
+#include <stdint.h>
+#include <utils.h>
+#include <xlat_tables.h>
+
+/*
+ * Extern declarations common to Marvell standard platforms
+ */
+extern const mmap_region_t plat_marvell_mmap[];
+
+#define MARVELL_CASSERT_MMAP						\
+	CASSERT((ARRAY_SIZE(plat_marvell_mmap) + MARVELL_BL_REGIONS)	\
+		<= MAX_MMAP_REGIONS,					\
+		assert_max_mmap_regions)
+
+/*
+ * Utility functions common to Marvell standard platforms
+ */
+void marvell_setup_page_tables(uintptr_t total_base,
+			       size_t total_size,
+			       uintptr_t code_start,
+			       uintptr_t code_limit,
+			       uintptr_t rodata_start,
+			       uintptr_t rodata_limit
+#if USE_COHERENT_MEM
+			     , uintptr_t coh_start,
+			       uintptr_t coh_limit
+#endif
+);
+
+/* IO storage utility functions */
+void marvell_io_setup(void);
+
+/* Systimer utility function */
+void marvell_configure_sys_timer(void);
+
+/* Topology utility function */
+int marvell_check_mpidr(u_register_t mpidr);
+
+/* BLE utility functions */
+int ble_plat_setup(int *skip);
+void plat_marvell_dram_update_topology(void);
+void ble_plat_pcie_ep_setup(void);
+struct pci_hw_cfg *plat_get_pcie_hw_data(void);
+
+/* BL1 utility functions */
+void marvell_bl1_early_platform_setup(void);
+void marvell_bl1_platform_setup(void);
+void marvell_bl1_plat_arch_setup(void);
+
+/* BL2 utility functions */
+void marvell_bl2_early_platform_setup(meminfo_t *mem_layout);
+void marvell_bl2_platform_setup(void);
+void marvell_bl2_plat_arch_setup(void);
+uint32_t marvell_get_spsr_for_bl32_entry(void);
+uint32_t marvell_get_spsr_for_bl33_entry(void);
+
+/* BL31 utility functions */
+void marvell_bl31_early_platform_setup(bl31_params_t *from_bl2,
+				void *plat_params_from_bl2);
+void marvell_bl31_platform_setup(void);
+void marvell_bl31_plat_runtime_setup(void);
+void marvell_bl31_plat_arch_setup(void);
+
+/* Power management config to power off the SoC */
+void *plat_marvell_get_pm_cfg(void);
+
+/* Check if MSS AP CM3 firmware contains PM support */
+_Bool is_pm_fw_running(void);
+
+/* Bootrom image recovery utility functions */
+void *plat_marvell_get_skip_image_data(void);
+
+/* FIP TOC validity check */
+int marvell_io_is_toc_valid(void);
+
+/*
+ * PSCI functionality
+ */
+void marvell_psci_arch_init(int ap_idx);
+void plat_marvell_system_reset(void);
+
+/*
+ * Optional functions required in Marvell standard platforms
+ */
+void plat_marvell_io_setup(void);
+int plat_marvell_get_alt_image_source(
+	unsigned int image_id,
+	uintptr_t *dev_handle,
+	uintptr_t *image_spec);
+unsigned int plat_marvell_calc_core_pos(u_register_t mpidr);
+
+const mmap_region_t *plat_marvell_get_mmap(void);
+void marvell_ble_prepare_exit(void);
+void marvell_exit_bootrom(uintptr_t base);
+
+int plat_marvell_early_cpu_powerdown(void);
+#endif /* __PLAT_MARVELL_H__ */
diff --git a/include/plat/marvell/a8k/common/plat_pm_trace.h b/include/plat/marvell/a8k/common/plat_pm_trace.h
new file mode 100644
index 0000000..0878959
--- /dev/null
+++ b/include/plat/marvell/a8k/common/plat_pm_trace.h
@@ -0,0 +1,100 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __PLAT_PM_TRACE_H
+#define __PLAT_PM_TRACE_H
+
+
+/*
+ * PM Trace is for Debug purpose only!!!
+ * It should not be enabled during System Run time
+ */
+#undef PM_TRACE_ENABLE
+
+
+/* trace entry time */
+struct pm_trace_entry {
+	/* trace entry time stamp */
+	unsigned int timestamp;
+
+	/* trace info
+	 * [16-31] - API Trace Id
+	 * [00-15] - API Step Id
+	 */
+	unsigned int trace_info;
+};
+
+struct pm_trace_ctrl {
+	/* trace pointer - points to next free entry in trace cyclic queue */
+	unsigned int trace_pointer;
+
+	/* trace count - number of entries in the queue, clear upon read */
+	unsigned int trace_count;
+};
+
+/* trace size definition */
+#define AP_MSS_ATF_CORE_INFO_SIZE	(256)
+#define AP_MSS_ATF_CORE_ENTRY_SIZE	(8)
+#define AP_MSS_ATF_TRACE_SIZE_MASK	(0xFF)
+
+/* trace address definition */
+#define AP_MSS_TIMER_BASE		(MVEBU_REGS_BASE_MASK + 0x580110)
+
+#define AP_MSS_ATF_CORE_0_CTRL_BASE	(MVEBU_REGS_BASE_MASK + 0x520140)
+#define AP_MSS_ATF_CORE_1_CTRL_BASE	(MVEBU_REGS_BASE_MASK + 0x520150)
+#define AP_MSS_ATF_CORE_2_CTRL_BASE	(MVEBU_REGS_BASE_MASK + 0x520160)
+#define AP_MSS_ATF_CORE_3_CTRL_BASE	(MVEBU_REGS_BASE_MASK + 0x520170)
+#define AP_MSS_ATF_CORE_CTRL_BASE	(AP_MSS_ATF_CORE_0_CTRL_BASE)
+
+#define AP_MSS_ATF_CORE_0_INFO_BASE	(MVEBU_REGS_BASE_MASK + 0x5201C0)
+#define AP_MSS_ATF_CORE_0_INFO_TRACE	(MVEBU_REGS_BASE_MASK + 0x5201C4)
+#define AP_MSS_ATF_CORE_1_INFO_BASE	(MVEBU_REGS_BASE_MASK + 0x5209C0)
+#define AP_MSS_ATF_CORE_1_INFO_TRACE	(MVEBU_REGS_BASE_MASK + 0x5209C4)
+#define AP_MSS_ATF_CORE_2_INFO_BASE	(MVEBU_REGS_BASE_MASK + 0x5211C0)
+#define AP_MSS_ATF_CORE_2_INFO_TRACE	(MVEBU_REGS_BASE_MASK + 0x5211C4)
+#define AP_MSS_ATF_CORE_3_INFO_BASE	(MVEBU_REGS_BASE_MASK + 0x5219C0)
+#define AP_MSS_ATF_CORE_3_INFO_TRACE	(MVEBU_REGS_BASE_MASK + 0x5219C4)
+#define AP_MSS_ATF_CORE_INFO_BASE	(AP_MSS_ATF_CORE_0_INFO_BASE)
+
+/* trace info definition */
+#define TRACE_PWR_DOMAIN_OFF		(0x10000)
+#define TRACE_PWR_DOMAIN_SUSPEND	(0x20000)
+#define TRACE_PWR_DOMAIN_SUSPEND_FINISH	(0x30000)
+#define TRACE_PWR_DOMAIN_ON		(0x40000)
+#define TRACE_PWR_DOMAIN_ON_FINISH	(0x50000)
+
+#define TRACE_PWR_DOMAIN_ON_MASK	(0xFF)
+
+#ifdef PM_TRACE_ENABLE
+
+/* trace API definition */
+void pm_core_0_trace(unsigned int trace);
+void pm_core_1_trace(unsigned int trace);
+void pm_core_2_trace(unsigned int trace);
+void pm_core_3_trace(unsigned int trace);
+
+typedef void (*core_trace_func)(unsigned int);
+
+extern core_trace_func funcTbl[PLATFORM_CORE_COUNT];
+
+#define PM_TRACE(trace) funcTbl[plat_my_core_pos()](trace)
+
+#else
+
+#define PM_TRACE(trace)
+
+#endif
+
+/*******************************************************************************
+ * pm_trace_add
+ *
+ * DESCRIPTION: Add PM trace
+ ******************************************************************************
+ */
+void pm_trace_add(unsigned int trace, unsigned int core);
+
+#endif /* __PLAT_PM_TRACE_H */
diff --git a/include/plat/marvell/common/aarch64/cci_macros.S b/include/plat/marvell/common/aarch64/cci_macros.S
new file mode 100644
index 0000000..d6080cf
--- /dev/null
+++ b/include/plat/marvell/common/aarch64/cci_macros.S
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __CCI_MACROS_S__
+#define __CCI_MACROS_S__
+
+#include <cci.h>
+#include <platform_def.h>
+
+.section .rodata.cci_reg_name, "aS"
+cci_iface_regs:
+	.asciz "cci_snoop_ctrl_cluster0", "cci_snoop_ctrl_cluster1" , ""
+
+	/* ------------------------------------------------
+	 * The below required platform porting macro prints
+	 * out relevant interconnect registers whenever an
+	 * unhandled exception is taken in BL31.
+	 * Clobbers: x0 - x9, sp
+	 * ------------------------------------------------
+	 */
+	.macro print_cci_regs
+	adr	x6, cci_iface_regs
+	/* Store in x7 the base address of the first interface */
+	mov_imm	x7, (PLAT_MARVELL_CCI_BASE + SLAVE_IFACE_OFFSET(	\
+			PLAT_MARVELL_CCI_CLUSTER0_SL_IFACE_IX))
+	ldr	w8, [x7, #SNOOP_CTRL_REG]
+	/* Store in x7 the base address of the second interface */
+	mov_imm	x7, (PLAT_MARVELL_CCI_BASE + SLAVE_IFACE_OFFSET(	\
+			PLAT_MARVELL_CCI_CLUSTER1_SL_IFACE_IX))
+	ldr	w9, [x7, #SNOOP_CTRL_REG]
+	/* Store to the crash buf and print to console */
+	bl	str_in_crash_buf_print
+	.endm
+
+#endif /* __CCI_MACROS_S__ */
diff --git a/include/plat/marvell/common/aarch64/marvell_macros.S b/include/plat/marvell/common/aarch64/marvell_macros.S
new file mode 100644
index 0000000..0102af0
--- /dev/null
+++ b/include/plat/marvell/common/aarch64/marvell_macros.S
@@ -0,0 +1,134 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __MARVELL_MACROS_S__
+#define __MARVELL_MACROS_S__
+
+#include <cci.h>
+#include <gic_common.h>
+#include <gicv2.h>
+#include <gicv3.h>
+#include <platform_def.h>
+
+/*
+ *	These Macros are required by ATF
+ */
+
+.section .rodata.gic_reg_name, "aS"
+/* Applicable only to GICv2 and GICv3 with SRE disabled (legacy mode) */
+gicc_regs:
+	.asciz "gicc_hppir", "gicc_ahppir", "gicc_ctlr", ""
+
+#ifdef USE_CCI
+/* Applicable only to GICv3 with SRE enabled */
+icc_regs:
+	.asciz "icc_hppir0_el1", "icc_hppir1_el1", "icc_ctlr_el3", ""
+#endif
+/* Registers common to both GICv2 and GICv3 */
+gicd_pend_reg:
+	.asciz "gicd_ispendr regs (Offsets 0x200 - 0x278)\n"	\
+		" Offset:\t\t\tvalue\n"
+newline:
+	.asciz "\n"
+spacer:
+	.asciz ":\t\t0x"
+
+	/* ---------------------------------------------
+	 * The below utility macro prints out relevant GIC
+	 * registers whenever an unhandled exception is
+	 * taken in BL31 on ARM standard platforms.
+	 * Expects: GICD base in x16, GICC base in x17
+	 * Clobbers: x0 - x10, sp
+	 * ---------------------------------------------
+	 */
+	.macro arm_print_gic_regs
+	/* Check for GICv3 system register access */
+	mrs	x7, id_aa64pfr0_el1
+	ubfx	x7, x7, #ID_AA64PFR0_GIC_SHIFT, #ID_AA64PFR0_GIC_WIDTH
+	cmp	x7, #1
+	b.ne	print_gicv2
+
+	/* Check for SRE enable */
+	mrs	x8, ICC_SRE_EL3
+	tst	x8, #ICC_SRE_SRE_BIT
+	b.eq	print_gicv2
+
+#ifdef USE_CCI
+	/* Load the icc reg list to x6 */
+	adr	x6, icc_regs
+	/* Load the icc regs to gp regs used by str_in_crash_buf_print */
+	mrs	x8, ICC_HPPIR0_EL1
+	mrs	x9, ICC_HPPIR1_EL1
+	mrs	x10, ICC_CTLR_EL3
+	/* Store to the crash buf and print to console */
+	bl	str_in_crash_buf_print
+#endif
+	b	print_gic_common
+
+print_gicv2:
+	/* Load the gicc reg list to x6 */
+	adr	x6, gicc_regs
+	/* Load the gicc regs to gp regs used by str_in_crash_buf_print */
+	ldr	w8, [x17, #GICC_HPPIR]
+	ldr	w9, [x17, #GICC_AHPPIR]
+	ldr	w10, [x17, #GICC_CTLR]
+	/* Store to the crash buf and print to console */
+	bl	str_in_crash_buf_print
+
+print_gic_common:
+	/* Print the GICD_ISPENDR regs */
+	add	x7, x16, #GICD_ISPENDR
+	adr	x4, gicd_pend_reg
+	bl	asm_print_str
+gicd_ispendr_loop:
+	sub	x4, x7, x16
+	cmp	x4, #0x280
+	b.eq	exit_print_gic_regs
+	bl	asm_print_hex
+
+	adr	x4, spacer
+	bl	asm_print_str
+
+	ldr	x4, [x7], #8
+	bl	asm_print_hex
+
+	adr	x4, newline
+	bl	asm_print_str
+	b	gicd_ispendr_loop
+exit_print_gic_regs:
+	.endm
+
+
+.section .rodata.cci_reg_name, "aS"
+cci_iface_regs:
+	.asciz "cci_snoop_ctrl_cluster0", "cci_snoop_ctrl_cluster1" , ""
+
+	/* ------------------------------------------------
+	 * The below required platform porting macro prints
+	 * out relevant interconnect registers whenever an
+	 * unhandled exception is taken in BL31.
+	 * Clobbers: x0 - x9, sp
+	 * ------------------------------------------------
+	 */
+	.macro print_cci_regs
+#ifdef USE_CCI
+	adr	x6, cci_iface_regs
+	/* Store in x7 the base address of the first interface */
+	mov_imm	x7, (PLAT_MARVELL_CCI_BASE + SLAVE_IFACE_OFFSET(	\
+			PLAT_MARVELL_CCI_CLUSTER0_SL_IFACE_IX))
+	ldr	w8, [x7, #SNOOP_CTRL_REG]
+	/* Store in x7 the base address of the second interface */
+	mov_imm	x7, (PLAT_MARVELL_CCI_BASE + SLAVE_IFACE_OFFSET(	\
+			PLAT_MARVELL_CCI_CLUSTER1_SL_IFACE_IX))
+	ldr	w9, [x7, #SNOOP_CTRL_REG]
+	/* Store to the crash buf and print to console */
+	bl	str_in_crash_buf_print
+#endif
+	.endm
+
+
+#endif /* __MARVELL_MACROS_S__ */
diff --git a/include/plat/marvell/common/marvell_plat_priv.h b/include/plat/marvell/common/marvell_plat_priv.h
new file mode 100644
index 0000000..c1dad0e
--- /dev/null
+++ b/include/plat/marvell/common/marvell_plat_priv.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __MARVELL_PLAT_PRIV_H__
+#define __MARVELL_PLAT_PRIV_H__
+
+#include <utils.h>
+
+/*****************************************************************************
+ * Function and variable prototypes
+ *****************************************************************************
+ */
+void plat_delay_timer_init(void);
+
+uint64_t mvebu_get_dram_size(uint64_t ap_base_addr);
+
+/*
+ * GIC operation, mandatory functions required in Marvell standard platforms
+ */
+void plat_marvell_gic_driver_init(void);
+void plat_marvell_gic_init(void);
+void plat_marvell_gic_cpuif_enable(void);
+void plat_marvell_gic_cpuif_disable(void);
+void plat_marvell_gic_pcpu_init(void);
+void plat_marvell_gic_irq_save(void);
+void plat_marvell_gic_irq_restore(void);
+void plat_marvell_gic_irq_pcpu_save(void);
+void plat_marvell_gic_irq_pcpu_restore(void);
+
+#endif /* __MARVELL_PLAT_PRIV_H__ */
diff --git a/include/plat/marvell/common/marvell_pm.h b/include/plat/marvell/common/marvell_pm.h
new file mode 100644
index 0000000..2817a46
--- /dev/null
+++ b/include/plat/marvell/common/marvell_pm.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef _MARVELL_PM_H_
+#define _MARVELL_PM_H_
+
+#define MVEBU_MAILBOX_MAGIC_NUM		PLAT_MARVELL_MAILBOX_MAGIC_NUM
+#define MVEBU_MAILBOX_SUSPEND_STATE	0xb007de7c
+
+/* Mailbox entry indexes */
+/* Magic number for validity check */
+#define	MBOX_IDX_MAGIC			0
+/* Recovery from suspend entry point */
+#define	MBOX_IDX_SEC_ADDR		1
+/* Suspend state magic number */
+#define	MBOX_IDX_SUSPEND_MAGIC		2
+/* Recovery jump address for ROM bypass */
+#define	MBOX_IDX_ROM_EXIT_ADDR		3
+/* BLE execution start counter value */
+#define	MBOX_IDX_START_CNT		4
+
+#endif /* _MARVELL_PM_H_ */
diff --git a/include/plat/marvell/common/mvebu.h b/include/plat/marvell/common/mvebu.h
new file mode 100644
index 0000000..a20e538
--- /dev/null
+++ b/include/plat/marvell/common/mvebu.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C)  2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef _MVEBU_H_
+#define _MVEBU_H_
+
+/* Use this functions only when printf is allowed */
+#define debug_enter()	VERBOSE("----> Enter %s\n", __func__)
+#define debug_exit()	VERBOSE("<---- Exit  %s\n", __func__)
+
+/* Macro for testing alignment. Positive if number is NOT aligned */
+#define IS_NOT_ALIGN(number, align)	((number) & ((align) - 1))
+
+/* Macro for alignment up. For example, ALIGN_UP(0x0330, 0x20) = 0x0340 */
+#define ALIGN_UP(number, align) (((number) & ((align) - 1)) ? \
+		(((number) + (align)) & ~((align)-1)) : (number))
+
+/* Macro for testing whether a number is a power of 2. Positive if so */
+#define IS_POWER_OF_2(number)	((number) != 0 && \
+				(((number) & ((number) - 1)) == 0))
+
+/*
+ * Macro for ronding up to next power of 2
+ * it is done by count leading 0 (clz assembly opcode) and see msb set bit.
+ * then you can shift it left and get number which power of 2
+ * Note: this Macro is for 32 bit number
+ */
+#define ROUND_UP_TO_POW_OF_2(number)	(1 << \
+					(32 - __builtin_clz((number) - 1)))
+
+#define _1MB_				(1024ULL*1024ULL)
+#define _1GB_				(_1MB_*1024ULL)
+
+#endif	/* MVEBU_H */