diff --git a/include/plat/marvell/common/aarch64/cci_macros.S b/include/plat/marvell/common/aarch64/cci_macros.S
new file mode 100644
index 0000000..d6080cf
--- /dev/null
+++ b/include/plat/marvell/common/aarch64/cci_macros.S
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __CCI_MACROS_S__
+#define __CCI_MACROS_S__
+
+#include <cci.h>
+#include <platform_def.h>
+
+.section .rodata.cci_reg_name, "aS"
+cci_iface_regs:
+	.asciz "cci_snoop_ctrl_cluster0", "cci_snoop_ctrl_cluster1" , ""
+
+	/* ------------------------------------------------
+	 * The below required platform porting macro prints
+	 * out relevant interconnect registers whenever an
+	 * unhandled exception is taken in BL31.
+	 * Clobbers: x0 - x9, sp
+	 * ------------------------------------------------
+	 */
+	.macro print_cci_regs
+	adr	x6, cci_iface_regs
+	/* Store in x7 the base address of the first interface */
+	mov_imm	x7, (PLAT_MARVELL_CCI_BASE + SLAVE_IFACE_OFFSET(	\
+			PLAT_MARVELL_CCI_CLUSTER0_SL_IFACE_IX))
+	ldr	w8, [x7, #SNOOP_CTRL_REG]
+	/* Store in x7 the base address of the second interface */
+	mov_imm	x7, (PLAT_MARVELL_CCI_BASE + SLAVE_IFACE_OFFSET(	\
+			PLAT_MARVELL_CCI_CLUSTER1_SL_IFACE_IX))
+	ldr	w9, [x7, #SNOOP_CTRL_REG]
+	/* Store to the crash buf and print to console */
+	bl	str_in_crash_buf_print
+	.endm
+
+#endif /* __CCI_MACROS_S__ */
diff --git a/include/plat/marvell/common/aarch64/marvell_macros.S b/include/plat/marvell/common/aarch64/marvell_macros.S
new file mode 100644
index 0000000..0102af0
--- /dev/null
+++ b/include/plat/marvell/common/aarch64/marvell_macros.S
@@ -0,0 +1,134 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __MARVELL_MACROS_S__
+#define __MARVELL_MACROS_S__
+
+#include <cci.h>
+#include <gic_common.h>
+#include <gicv2.h>
+#include <gicv3.h>
+#include <platform_def.h>
+
+/*
+ *	These Macros are required by ATF
+ */
+
+.section .rodata.gic_reg_name, "aS"
+/* Applicable only to GICv2 and GICv3 with SRE disabled (legacy mode) */
+gicc_regs:
+	.asciz "gicc_hppir", "gicc_ahppir", "gicc_ctlr", ""
+
+#ifdef USE_CCI
+/* Applicable only to GICv3 with SRE enabled */
+icc_regs:
+	.asciz "icc_hppir0_el1", "icc_hppir1_el1", "icc_ctlr_el3", ""
+#endif
+/* Registers common to both GICv2 and GICv3 */
+gicd_pend_reg:
+	.asciz "gicd_ispendr regs (Offsets 0x200 - 0x278)\n"	\
+		" Offset:\t\t\tvalue\n"
+newline:
+	.asciz "\n"
+spacer:
+	.asciz ":\t\t0x"
+
+	/* ---------------------------------------------
+	 * The below utility macro prints out relevant GIC
+	 * registers whenever an unhandled exception is
+	 * taken in BL31 on ARM standard platforms.
+	 * Expects: GICD base in x16, GICC base in x17
+	 * Clobbers: x0 - x10, sp
+	 * ---------------------------------------------
+	 */
+	.macro arm_print_gic_regs
+	/* Check for GICv3 system register access */
+	mrs	x7, id_aa64pfr0_el1
+	ubfx	x7, x7, #ID_AA64PFR0_GIC_SHIFT, #ID_AA64PFR0_GIC_WIDTH
+	cmp	x7, #1
+	b.ne	print_gicv2
+
+	/* Check for SRE enable */
+	mrs	x8, ICC_SRE_EL3
+	tst	x8, #ICC_SRE_SRE_BIT
+	b.eq	print_gicv2
+
+#ifdef USE_CCI
+	/* Load the icc reg list to x6 */
+	adr	x6, icc_regs
+	/* Load the icc regs to gp regs used by str_in_crash_buf_print */
+	mrs	x8, ICC_HPPIR0_EL1
+	mrs	x9, ICC_HPPIR1_EL1
+	mrs	x10, ICC_CTLR_EL3
+	/* Store to the crash buf and print to console */
+	bl	str_in_crash_buf_print
+#endif
+	b	print_gic_common
+
+print_gicv2:
+	/* Load the gicc reg list to x6 */
+	adr	x6, gicc_regs
+	/* Load the gicc regs to gp regs used by str_in_crash_buf_print */
+	ldr	w8, [x17, #GICC_HPPIR]
+	ldr	w9, [x17, #GICC_AHPPIR]
+	ldr	w10, [x17, #GICC_CTLR]
+	/* Store to the crash buf and print to console */
+	bl	str_in_crash_buf_print
+
+print_gic_common:
+	/* Print the GICD_ISPENDR regs */
+	add	x7, x16, #GICD_ISPENDR
+	adr	x4, gicd_pend_reg
+	bl	asm_print_str
+gicd_ispendr_loop:
+	sub	x4, x7, x16
+	cmp	x4, #0x280
+	b.eq	exit_print_gic_regs
+	bl	asm_print_hex
+
+	adr	x4, spacer
+	bl	asm_print_str
+
+	ldr	x4, [x7], #8
+	bl	asm_print_hex
+
+	adr	x4, newline
+	bl	asm_print_str
+	b	gicd_ispendr_loop
+exit_print_gic_regs:
+	.endm
+
+
+.section .rodata.cci_reg_name, "aS"
+cci_iface_regs:
+	.asciz "cci_snoop_ctrl_cluster0", "cci_snoop_ctrl_cluster1" , ""
+
+	/* ------------------------------------------------
+	 * The below required platform porting macro prints
+	 * out relevant interconnect registers whenever an
+	 * unhandled exception is taken in BL31.
+	 * Clobbers: x0 - x9, sp
+	 * ------------------------------------------------
+	 */
+	.macro print_cci_regs
+#ifdef USE_CCI
+	adr	x6, cci_iface_regs
+	/* Store in x7 the base address of the first interface */
+	mov_imm	x7, (PLAT_MARVELL_CCI_BASE + SLAVE_IFACE_OFFSET(	\
+			PLAT_MARVELL_CCI_CLUSTER0_SL_IFACE_IX))
+	ldr	w8, [x7, #SNOOP_CTRL_REG]
+	/* Store in x7 the base address of the second interface */
+	mov_imm	x7, (PLAT_MARVELL_CCI_BASE + SLAVE_IFACE_OFFSET(	\
+			PLAT_MARVELL_CCI_CLUSTER1_SL_IFACE_IX))
+	ldr	w9, [x7, #SNOOP_CTRL_REG]
+	/* Store to the crash buf and print to console */
+	bl	str_in_crash_buf_print
+#endif
+	.endm
+
+
+#endif /* __MARVELL_MACROS_S__ */
diff --git a/include/plat/marvell/common/marvell_plat_priv.h b/include/plat/marvell/common/marvell_plat_priv.h
new file mode 100644
index 0000000..c1dad0e
--- /dev/null
+++ b/include/plat/marvell/common/marvell_plat_priv.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __MARVELL_PLAT_PRIV_H__
+#define __MARVELL_PLAT_PRIV_H__
+
+#include <utils.h>
+
+/*****************************************************************************
+ * Function and variable prototypes
+ *****************************************************************************
+ */
+void plat_delay_timer_init(void);
+
+uint64_t mvebu_get_dram_size(uint64_t ap_base_addr);
+
+/*
+ * GIC operation, mandatory functions required in Marvell standard platforms
+ */
+void plat_marvell_gic_driver_init(void);
+void plat_marvell_gic_init(void);
+void plat_marvell_gic_cpuif_enable(void);
+void plat_marvell_gic_cpuif_disable(void);
+void plat_marvell_gic_pcpu_init(void);
+void plat_marvell_gic_irq_save(void);
+void plat_marvell_gic_irq_restore(void);
+void plat_marvell_gic_irq_pcpu_save(void);
+void plat_marvell_gic_irq_pcpu_restore(void);
+
+#endif /* __MARVELL_PLAT_PRIV_H__ */
diff --git a/include/plat/marvell/common/marvell_pm.h b/include/plat/marvell/common/marvell_pm.h
new file mode 100644
index 0000000..2817a46
--- /dev/null
+++ b/include/plat/marvell/common/marvell_pm.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef _MARVELL_PM_H_
+#define _MARVELL_PM_H_
+
+#define MVEBU_MAILBOX_MAGIC_NUM		PLAT_MARVELL_MAILBOX_MAGIC_NUM
+#define MVEBU_MAILBOX_SUSPEND_STATE	0xb007de7c
+
+/* Mailbox entry indexes */
+/* Magic number for validity check */
+#define	MBOX_IDX_MAGIC			0
+/* Recovery from suspend entry point */
+#define	MBOX_IDX_SEC_ADDR		1
+/* Suspend state magic number */
+#define	MBOX_IDX_SUSPEND_MAGIC		2
+/* Recovery jump address for ROM bypass */
+#define	MBOX_IDX_ROM_EXIT_ADDR		3
+/* BLE execution start counter value */
+#define	MBOX_IDX_START_CNT		4
+
+#endif /* _MARVELL_PM_H_ */
diff --git a/include/plat/marvell/common/mvebu.h b/include/plat/marvell/common/mvebu.h
new file mode 100644
index 0000000..a20e538
--- /dev/null
+++ b/include/plat/marvell/common/mvebu.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C)  2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef _MVEBU_H_
+#define _MVEBU_H_
+
+/* Use this functions only when printf is allowed */
+#define debug_enter()	VERBOSE("----> Enter %s\n", __func__)
+#define debug_exit()	VERBOSE("<---- Exit  %s\n", __func__)
+
+/* Macro for testing alignment. Positive if number is NOT aligned */
+#define IS_NOT_ALIGN(number, align)	((number) & ((align) - 1))
+
+/* Macro for alignment up. For example, ALIGN_UP(0x0330, 0x20) = 0x0340 */
+#define ALIGN_UP(number, align) (((number) & ((align) - 1)) ? \
+		(((number) + (align)) & ~((align)-1)) : (number))
+
+/* Macro for testing whether a number is a power of 2. Positive if so */
+#define IS_POWER_OF_2(number)	((number) != 0 && \
+				(((number) & ((number) - 1)) == 0))
+
+/*
+ * Macro for ronding up to next power of 2
+ * it is done by count leading 0 (clz assembly opcode) and see msb set bit.
+ * then you can shift it left and get number which power of 2
+ * Note: this Macro is for 32 bit number
+ */
+#define ROUND_UP_TO_POW_OF_2(number)	(1 << \
+					(32 - __builtin_clz((number) - 1)))
+
+#define _1MB_				(1024ULL*1024ULL)
+#define _1GB_				(_1MB_*1024ULL)
+
+#endif	/* MVEBU_H */