plat: marvell: Add common ARMADA platform components
Add common Marvell ARMADA platform components.
This patch also includes common components for Marvell
ARMADA 8K platforms.
Change-Id: I42192fdc6525a42e46b3ac2ad63c83db9bcbfeaf
Signed-off-by: Hanna Hawa <hannah@marvell.com>
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
diff --git a/include/plat/marvell/a8k/common/a8k_common.h b/include/plat/marvell/a8k/common/a8k_common.h
new file mode 100644
index 0000000..e727467
--- /dev/null
+++ b/include/plat/marvell/a8k/common/a8k_common.h
@@ -0,0 +1,128 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __A8K_COMMON_H__
+#define __A8K_COMMON_H__
+
+#include <amb_adec.h>
+#include <io_win.h>
+#include <iob.h>
+#include <ccu.h>
+
+/*
+ * This struct supports skip image request
+ * detection_method: the method used to detect the request "signal".
+ * info:
+ * GPIO:
+ * detection_method: HIGH (pressed button), LOW (unpressed button),
+ * num (button mpp number).
+ * i2c:
+ * i2c_addr: the address of the i2c chosen.
+ * i2d_reg: the i2c register chosen.
+ * test:
+ * choose the DIE you picked the button in (AP or CP).
+ * in case of CP(cp_index = 0 if CP0, cp_index = 1 if CP1)
+ */
+struct skip_image {
+ enum {
+ GPIO,
+ I2C,
+ USER_DEFINED
+ } detection_method;
+
+ struct {
+ struct {
+ int num;
+ enum {
+ HIGH,
+ LOW
+ } button_state;
+
+ } gpio;
+
+ struct {
+ int i2c_addr;
+ int i2c_reg;
+ } i2c;
+
+ struct {
+ enum {
+ CP,
+ AP
+ } cp_ap;
+ int cp_index;
+ } test;
+ } info;
+};
+
+/*
+ * This struct supports SoC power off method
+ * type: the method used to power off the SoC
+ * cfg:
+ * PMIC_GPIO:
+ * pin_count: current GPIO pin number used for toggling the signal for
+ * notifying external PMIC
+ * info: holds the GPIOs information, CP GPIO should be used and
+ * all GPIOs should be within same GPIO config. register
+ * step_count: current step number to toggle the GPIO for PMIC
+ * seq: GPIO toggling values in sequence, each bit represents a GPIO.
+ * For example, bit0 represents first GPIO used for toggling
+ * the GPIO the last step is used to trigger the power off
+ * signal
+ * delay_ms: transition interval for the GPIO setting to take effect
+ * in unit of ms
+ */
+/* Max GPIO number used to notify PMIC to power off the SoC */
+#define PMIC_GPIO_MAX_NUMBER 8
+/* Max GPIO toggling steps in sequence to power off the SoC */
+#define PMIC_GPIO_MAX_TOGGLE_STEP 8
+
+enum gpio_output_state {
+ GPIO_LOW = 0,
+ GPIO_HIGH
+};
+
+typedef struct gpio_info {
+ int cp_index;
+ int gpio_index;
+} gpio_info_t;
+
+struct power_off_method {
+ enum {
+ PMIC_GPIO,
+ } type;
+
+ struct {
+ struct {
+ int pin_count;
+ struct gpio_info info[PMIC_GPIO_MAX_NUMBER];
+ int step_count;
+ uint32_t seq[PMIC_GPIO_MAX_TOGGLE_STEP];
+ int delay_ms;
+ } gpio;
+ } cfg;
+};
+
+int marvell_gpio_config(void);
+uint32_t marvell_get_io_win_gcr_target(int ap_idx);
+uint32_t marvell_get_ccu_gcr_target(int ap_idx);
+
+
+/*
+ * The functions below are defined as Weak and may be overridden
+ * in specific Marvell standard platform
+ */
+int marvell_get_amb_memory_map(struct addr_map_win **win,
+ uint32_t *size, uintptr_t base);
+int marvell_get_io_win_memory_map(int ap_idx, struct addr_map_win **win,
+ uint32_t *size);
+int marvell_get_iob_memory_map(struct addr_map_win **win,
+ uint32_t *size, uintptr_t base);
+int marvell_get_ccu_memory_map(int ap_idx, struct addr_map_win **win,
+ uint32_t *size);
+
+#endif /* __A8K_COMMON_H__ */
diff --git a/include/plat/marvell/a8k/common/board_marvell_def.h b/include/plat/marvell/a8k/common/board_marvell_def.h
new file mode 100644
index 0000000..b1054db
--- /dev/null
+++ b/include/plat/marvell/a8k/common/board_marvell_def.h
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __BOARD_MARVELL_DEF_H__
+#define __BOARD_MARVELL_DEF_H__
+
+/*
+ * Required platform porting definitions common to all ARM
+ * development platforms
+ */
+
+/* Size of cacheable stacks */
+#if DEBUG_XLAT_TABLE
+# define PLATFORM_STACK_SIZE 0x800
+#elif IMAGE_BL1
+#if TRUSTED_BOARD_BOOT
+# define PLATFORM_STACK_SIZE 0x1000
+#else
+# define PLATFORM_STACK_SIZE 0x440
+#endif
+#elif IMAGE_BL2
+# if TRUSTED_BOARD_BOOT
+# define PLATFORM_STACK_SIZE 0x1000
+# else
+# define PLATFORM_STACK_SIZE 0x400
+# endif
+#elif IMAGE_BL31
+# define PLATFORM_STACK_SIZE 0x400
+#elif IMAGE_BL32
+# define PLATFORM_STACK_SIZE 0x440
+#endif
+
+/*
+ * PLAT_MARVELL_MMAP_ENTRIES depends on the number of entries in the
+ * plat_arm_mmap array defined for each BL stage.
+ */
+#if IMAGE_BLE
+# define PLAT_MARVELL_MMAP_ENTRIES 3
+#endif
+#if IMAGE_BL1
+# if TRUSTED_BOARD_BOOT
+# define PLAT_MARVELL_MMAP_ENTRIES 7
+# else
+# define PLAT_MARVELL_MMAP_ENTRIES 6
+# endif /* TRUSTED_BOARD_BOOT */
+#endif
+#if IMAGE_BL2
+# define PLAT_MARVELL_MMAP_ENTRIES 8
+#endif
+#if IMAGE_BL31
+#define PLAT_MARVELL_MMAP_ENTRIES 5
+#endif
+
+/*
+ * Platform specific page table and MMU setup constants
+ */
+#if IMAGE_BL1
+#define MAX_XLAT_TABLES 4
+#elif IMAGE_BLE
+# define MAX_XLAT_TABLES 4
+#elif IMAGE_BL2
+# define MAX_XLAT_TABLES 4
+#elif IMAGE_BL31
+# define MAX_XLAT_TABLES 4
+#elif IMAGE_BL32
+# define MAX_XLAT_TABLES 4
+#endif
+
+#define MAX_IO_DEVICES 3
+#define MAX_IO_HANDLES 4
+
+#define PLAT_MARVELL_TRUSTED_SRAM_SIZE 0x80000 /* 512 KB */
+
+
+#endif /* __BOARD_MARVELL_DEF_H__ */
diff --git a/include/plat/marvell/a8k/common/marvell_def.h b/include/plat/marvell/a8k/common/marvell_def.h
new file mode 100644
index 0000000..7dacf82
--- /dev/null
+++ b/include/plat/marvell/a8k/common/marvell_def.h
@@ -0,0 +1,180 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __MARVELL_DEF_H__
+#define __MARVELL_DEF_H__
+
+#include <arch.h>
+#include <common_def.h>
+#include <platform_def.h>
+#include <tbbr_img_def.h>
+#include <xlat_tables.h>
+
+
+/******************************************************************************
+ * Definitions common to all MARVELL standard platforms
+ *****************************************************************************/
+
+/* Special value used to verify platform parameters from BL2 to BL31 */
+#define MARVELL_BL31_PLAT_PARAM_VAL 0x0f1e2d3c4b5a6978ULL
+
+
+#define MARVELL_CACHE_WRITEBACK_SHIFT 6
+
+/*
+ * Macros mapping the MPIDR Affinity levels to MARVELL Platform Power levels.
+ * The power levels have a 1:1 mapping with the MPIDR affinity levels.
+ */
+#define MARVELL_PWR_LVL0 MPIDR_AFFLVL0
+#define MARVELL_PWR_LVL1 MPIDR_AFFLVL1
+#define MARVELL_PWR_LVL2 MPIDR_AFFLVL2
+
+/*
+ * Macros for local power states in Marvell platforms encoded by
+ * State-ID field within the power-state parameter.
+ */
+/* Local power state for power domains in Run state. */
+#define MARVELL_LOCAL_STATE_RUN 0
+/* Local power state for retention. Valid only for CPU power domains */
+#define MARVELL_LOCAL_STATE_RET 1
+/*
+ * Local power state for OFF/power-down. Valid for CPU
+ * and cluster power domains
+ */
+#define MARVELL_LOCAL_STATE_OFF 2
+
+/* The first 4KB of Trusted SRAM are used as shared memory */
+#define MARVELL_TRUSTED_SRAM_BASE PLAT_MARVELL_ATF_BASE
+#define MARVELL_SHARED_RAM_BASE MARVELL_TRUSTED_SRAM_BASE
+#define MARVELL_SHARED_RAM_SIZE 0x00001000 /* 4 KB */
+
+/* The remaining Trusted SRAM is used to load the BL images */
+#define MARVELL_BL_RAM_BASE (MARVELL_SHARED_RAM_BASE + \
+ MARVELL_SHARED_RAM_SIZE)
+#define MARVELL_BL_RAM_SIZE (PLAT_MARVELL_TRUSTED_SRAM_SIZE - \
+ MARVELL_SHARED_RAM_SIZE)
+/* Non-shared DRAM */
+#define MARVELL_DRAM_BASE ULL(0x0)
+#define MARVELL_DRAM_SIZE ULL(0x80000000)
+#define MARVELL_DRAM_END (MARVELL_DRAM_BASE + \
+ MARVELL_DRAM_SIZE - 1)
+
+#define MARVELL_IRQ_SEC_PHY_TIMER 29
+
+#define MARVELL_IRQ_SEC_SGI_0 8
+#define MARVELL_IRQ_SEC_SGI_1 9
+#define MARVELL_IRQ_SEC_SGI_2 10
+#define MARVELL_IRQ_SEC_SGI_3 11
+#define MARVELL_IRQ_SEC_SGI_4 12
+#define MARVELL_IRQ_SEC_SGI_5 13
+#define MARVELL_IRQ_SEC_SGI_6 14
+#define MARVELL_IRQ_SEC_SGI_7 15
+
+#define MARVELL_MAP_SHARED_RAM MAP_REGION_FLAT( \
+ MARVELL_SHARED_RAM_BASE,\
+ MARVELL_SHARED_RAM_SIZE,\
+ MT_MEMORY | MT_RW | MT_SECURE)
+
+#define MARVELL_MAP_DRAM MAP_REGION_FLAT( \
+ MARVELL_DRAM_BASE, \
+ MARVELL_DRAM_SIZE, \
+ MT_MEMORY | MT_RW | MT_NS)
+
+
+/*
+ * The number of regions like RO(code), coherent and data required by
+ * different BL stages which need to be mapped in the MMU.
+ */
+#if USE_COHERENT_MEM
+#define MARVELL_BL_REGIONS 3
+#else
+#define MARVELL_BL_REGIONS 2
+#endif
+
+#define MAX_MMAP_REGIONS (PLAT_MARVELL_MMAP_ENTRIES + \
+ MARVELL_BL_REGIONS)
+
+#define MARVELL_CONSOLE_BAUDRATE 115200
+
+/******************************************************************************
+ * Required platform porting definitions common to all MARVELL std. platforms
+ *****************************************************************************/
+
+#define PLAT_PHY_ADDR_SPACE_SIZE (1ULL << 32)
+#define PLAT_VIRT_ADDR_SPACE_SIZE (1ULL << 32)
+
+/*
+ * This macro defines the deepest retention state possible. A higher state
+ * id will represent an invalid or a power down state.
+ */
+#define PLAT_MAX_RET_STATE MARVELL_LOCAL_STATE_RET
+
+/*
+ * This macro defines the deepest power down states possible. Any state ID
+ * higher than this is invalid.
+ */
+#define PLAT_MAX_OFF_STATE MARVELL_LOCAL_STATE_OFF
+
+
+#define PLATFORM_CORE_COUNT PLAT_MARVELL_CORE_COUNT
+#define PLAT_NUM_PWR_DOMAINS (PLAT_MARVELL_CLUSTER_COUNT + \
+ PLATFORM_CORE_COUNT)
+
+/*
+ * Some data must be aligned on the biggest cache line size in the platform.
+ * This is known only to the platform as it might have a combination of
+ * integrated and external caches.
+ */
+#define CACHE_WRITEBACK_GRANULE (1 << MARVELL_CACHE_WRITEBACK_SHIFT)
+
+
+/*******************************************************************************
+ * BL1 specific defines.
+ * BL1 RW data is relocated from ROM to RAM at runtime so we need 2 sets of
+ * addresses.
+ ******************************************************************************/
+#define BL1_RO_BASE PLAT_MARVELL_TRUSTED_ROM_BASE
+#define BL1_RO_LIMIT (PLAT_MARVELL_TRUSTED_ROM_BASE \
+ + PLAT_MARVELL_TRUSTED_ROM_SIZE)
+/*
+ * Put BL1 RW at the top of the Trusted SRAM.
+ */
+#define BL1_RW_BASE (MARVELL_BL_RAM_BASE + \
+ MARVELL_BL_RAM_SIZE - \
+ PLAT_MARVELL_MAX_BL1_RW_SIZE)
+#define BL1_RW_LIMIT (MARVELL_BL_RAM_BASE + MARVELL_BL_RAM_SIZE)
+
+/*******************************************************************************
+ * BLE specific defines.
+ ******************************************************************************/
+#define BLE_BASE PLAT_MARVELL_SRAM_BASE
+#define BLE_LIMIT PLAT_MARVELL_SRAM_END
+
+/*******************************************************************************
+ * BL2 specific defines.
+ ******************************************************************************/
+/*
+ * Put BL2 just below BL31.
+ */
+#define BL2_BASE (BL31_BASE - PLAT_MARVELL_MAX_BL2_SIZE)
+#define BL2_LIMIT BL31_BASE
+
+/*******************************************************************************
+ * BL31 specific defines.
+ ******************************************************************************/
+/*
+ * Put BL31 at the top of the Trusted SRAM.
+ */
+#define BL31_BASE (MARVELL_BL_RAM_BASE + \
+ MARVELL_BL_RAM_SIZE - \
+ PLAT_MARVEL_MAX_BL31_SIZE)
+#define BL31_PROGBITS_LIMIT BL1_RW_BASE
+#define BL31_LIMIT (MARVELL_BL_RAM_BASE + \
+ MARVELL_BL_RAM_SIZE)
+
+
+#endif /* __MARVELL_DEF_H__ */
diff --git a/include/plat/marvell/a8k/common/plat_marvell.h b/include/plat/marvell/a8k/common/plat_marvell.h
new file mode 100644
index 0000000..aad5da7
--- /dev/null
+++ b/include/plat/marvell/a8k/common/plat_marvell.h
@@ -0,0 +1,109 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __PLAT_MARVELL_H__
+#define __PLAT_MARVELL_H__
+
+#include <cassert.h>
+#include <cpu_data.h>
+#include <stdint.h>
+#include <utils.h>
+#include <xlat_tables.h>
+
+/*
+ * Extern declarations common to Marvell standard platforms
+ */
+extern const mmap_region_t plat_marvell_mmap[];
+
+#define MARVELL_CASSERT_MMAP \
+ CASSERT((ARRAY_SIZE(plat_marvell_mmap) + MARVELL_BL_REGIONS) \
+ <= MAX_MMAP_REGIONS, \
+ assert_max_mmap_regions)
+
+/*
+ * Utility functions common to Marvell standard platforms
+ */
+void marvell_setup_page_tables(uintptr_t total_base,
+ size_t total_size,
+ uintptr_t code_start,
+ uintptr_t code_limit,
+ uintptr_t rodata_start,
+ uintptr_t rodata_limit
+#if USE_COHERENT_MEM
+ , uintptr_t coh_start,
+ uintptr_t coh_limit
+#endif
+);
+
+/* IO storage utility functions */
+void marvell_io_setup(void);
+
+/* Systimer utility function */
+void marvell_configure_sys_timer(void);
+
+/* Topology utility function */
+int marvell_check_mpidr(u_register_t mpidr);
+
+/* BLE utility functions */
+int ble_plat_setup(int *skip);
+void plat_marvell_dram_update_topology(void);
+void ble_plat_pcie_ep_setup(void);
+struct pci_hw_cfg *plat_get_pcie_hw_data(void);
+
+/* BL1 utility functions */
+void marvell_bl1_early_platform_setup(void);
+void marvell_bl1_platform_setup(void);
+void marvell_bl1_plat_arch_setup(void);
+
+/* BL2 utility functions */
+void marvell_bl2_early_platform_setup(meminfo_t *mem_layout);
+void marvell_bl2_platform_setup(void);
+void marvell_bl2_plat_arch_setup(void);
+uint32_t marvell_get_spsr_for_bl32_entry(void);
+uint32_t marvell_get_spsr_for_bl33_entry(void);
+
+/* BL31 utility functions */
+void marvell_bl31_early_platform_setup(bl31_params_t *from_bl2,
+ void *plat_params_from_bl2);
+void marvell_bl31_platform_setup(void);
+void marvell_bl31_plat_runtime_setup(void);
+void marvell_bl31_plat_arch_setup(void);
+
+/* Power management config to power off the SoC */
+void *plat_marvell_get_pm_cfg(void);
+
+/* Check if MSS AP CM3 firmware contains PM support */
+_Bool is_pm_fw_running(void);
+
+/* Bootrom image recovery utility functions */
+void *plat_marvell_get_skip_image_data(void);
+
+/* FIP TOC validity check */
+int marvell_io_is_toc_valid(void);
+
+/*
+ * PSCI functionality
+ */
+void marvell_psci_arch_init(int ap_idx);
+void plat_marvell_system_reset(void);
+
+/*
+ * Optional functions required in Marvell standard platforms
+ */
+void plat_marvell_io_setup(void);
+int plat_marvell_get_alt_image_source(
+ unsigned int image_id,
+ uintptr_t *dev_handle,
+ uintptr_t *image_spec);
+unsigned int plat_marvell_calc_core_pos(u_register_t mpidr);
+
+const mmap_region_t *plat_marvell_get_mmap(void);
+void marvell_ble_prepare_exit(void);
+void marvell_exit_bootrom(uintptr_t base);
+
+int plat_marvell_early_cpu_powerdown(void);
+#endif /* __PLAT_MARVELL_H__ */
diff --git a/include/plat/marvell/a8k/common/plat_pm_trace.h b/include/plat/marvell/a8k/common/plat_pm_trace.h
new file mode 100644
index 0000000..0878959
--- /dev/null
+++ b/include/plat/marvell/a8k/common/plat_pm_trace.h
@@ -0,0 +1,100 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __PLAT_PM_TRACE_H
+#define __PLAT_PM_TRACE_H
+
+
+/*
+ * PM Trace is for Debug purpose only!!!
+ * It should not be enabled during System Run time
+ */
+#undef PM_TRACE_ENABLE
+
+
+/* trace entry time */
+struct pm_trace_entry {
+ /* trace entry time stamp */
+ unsigned int timestamp;
+
+ /* trace info
+ * [16-31] - API Trace Id
+ * [00-15] - API Step Id
+ */
+ unsigned int trace_info;
+};
+
+struct pm_trace_ctrl {
+ /* trace pointer - points to next free entry in trace cyclic queue */
+ unsigned int trace_pointer;
+
+ /* trace count - number of entries in the queue, clear upon read */
+ unsigned int trace_count;
+};
+
+/* trace size definition */
+#define AP_MSS_ATF_CORE_INFO_SIZE (256)
+#define AP_MSS_ATF_CORE_ENTRY_SIZE (8)
+#define AP_MSS_ATF_TRACE_SIZE_MASK (0xFF)
+
+/* trace address definition */
+#define AP_MSS_TIMER_BASE (MVEBU_REGS_BASE_MASK + 0x580110)
+
+#define AP_MSS_ATF_CORE_0_CTRL_BASE (MVEBU_REGS_BASE_MASK + 0x520140)
+#define AP_MSS_ATF_CORE_1_CTRL_BASE (MVEBU_REGS_BASE_MASK + 0x520150)
+#define AP_MSS_ATF_CORE_2_CTRL_BASE (MVEBU_REGS_BASE_MASK + 0x520160)
+#define AP_MSS_ATF_CORE_3_CTRL_BASE (MVEBU_REGS_BASE_MASK + 0x520170)
+#define AP_MSS_ATF_CORE_CTRL_BASE (AP_MSS_ATF_CORE_0_CTRL_BASE)
+
+#define AP_MSS_ATF_CORE_0_INFO_BASE (MVEBU_REGS_BASE_MASK + 0x5201C0)
+#define AP_MSS_ATF_CORE_0_INFO_TRACE (MVEBU_REGS_BASE_MASK + 0x5201C4)
+#define AP_MSS_ATF_CORE_1_INFO_BASE (MVEBU_REGS_BASE_MASK + 0x5209C0)
+#define AP_MSS_ATF_CORE_1_INFO_TRACE (MVEBU_REGS_BASE_MASK + 0x5209C4)
+#define AP_MSS_ATF_CORE_2_INFO_BASE (MVEBU_REGS_BASE_MASK + 0x5211C0)
+#define AP_MSS_ATF_CORE_2_INFO_TRACE (MVEBU_REGS_BASE_MASK + 0x5211C4)
+#define AP_MSS_ATF_CORE_3_INFO_BASE (MVEBU_REGS_BASE_MASK + 0x5219C0)
+#define AP_MSS_ATF_CORE_3_INFO_TRACE (MVEBU_REGS_BASE_MASK + 0x5219C4)
+#define AP_MSS_ATF_CORE_INFO_BASE (AP_MSS_ATF_CORE_0_INFO_BASE)
+
+/* trace info definition */
+#define TRACE_PWR_DOMAIN_OFF (0x10000)
+#define TRACE_PWR_DOMAIN_SUSPEND (0x20000)
+#define TRACE_PWR_DOMAIN_SUSPEND_FINISH (0x30000)
+#define TRACE_PWR_DOMAIN_ON (0x40000)
+#define TRACE_PWR_DOMAIN_ON_FINISH (0x50000)
+
+#define TRACE_PWR_DOMAIN_ON_MASK (0xFF)
+
+#ifdef PM_TRACE_ENABLE
+
+/* trace API definition */
+void pm_core_0_trace(unsigned int trace);
+void pm_core_1_trace(unsigned int trace);
+void pm_core_2_trace(unsigned int trace);
+void pm_core_3_trace(unsigned int trace);
+
+typedef void (*core_trace_func)(unsigned int);
+
+extern core_trace_func funcTbl[PLATFORM_CORE_COUNT];
+
+#define PM_TRACE(trace) funcTbl[plat_my_core_pos()](trace)
+
+#else
+
+#define PM_TRACE(trace)
+
+#endif
+
+/*******************************************************************************
+ * pm_trace_add
+ *
+ * DESCRIPTION: Add PM trace
+ ******************************************************************************
+ */
+void pm_trace_add(unsigned int trace, unsigned int core);
+
+#endif /* __PLAT_PM_TRACE_H */