feat(plat/nxp/ls1043a): add ls1043a soc support
The LS1043A processor was NXP's first quad-core, 64-bit Arm based
processor for embedded networking.
The old implementation in tf-a (plat/layerscape/board/ls1043/) is removed,
and this patch is adding it back, it is using the unified software
component and architecture with all the other Layerscape platforms.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: rocket <rod.dorris@nxp.com>
Change-Id: Ia3877530fae6479bd4a33bbe46b0c0d28ab43160
diff --git a/plat/nxp/soc-ls1043a/soc.mk b/plat/nxp/soc-ls1043a/soc.mk
new file mode 100644
index 0000000..b6ce14e
--- /dev/null
+++ b/plat/nxp/soc-ls1043a/soc.mk
@@ -0,0 +1,114 @@
+#
+# Copyright 2018-2021 NXP
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# SoC-specific build parameters
+SOC := ls1043a
+PLAT_PATH := plat/nxp
+PLAT_COMMON_PATH := plat/nxp/common
+PLAT_DRIVERS_PATH := drivers/nxp
+PLAT_SOC_PATH := ${PLAT_PATH}/soc-${SOC}
+BOARD_PATH := ${PLAT_SOC_PATH}/${BOARD}
+
+# get SoC-specific defnitions
+include ${PLAT_SOC_PATH}/soc.def
+include ${PLAT_COMMON_PATH}/plat_make_helper/soc_common_def.mk
+include ${PLAT_COMMON_PATH}/plat_make_helper/plat_build_macros.mk
+
+# For Security Features
+DISABLE_FUSE_WRITE := 1
+ifeq (${TRUSTED_BOARD_BOOT}, 1)
+$(eval $(call SET_NXP_MAKE_FLAG,SMMU_NEEDED,BL2))
+$(eval $(call SET_NXP_MAKE_FLAG,SFP_NEEDED,BL2))
+$(eval $(call SET_NXP_MAKE_FLAG,SNVS_NEEDED,BL2))
+SECURE_BOOT := yes
+endif
+$(eval $(call SET_NXP_MAKE_FLAG,CRYPTO_NEEDED,BL_COMM))
+
+# Selecting Drivers for SoC
+$(eval $(call SET_NXP_MAKE_FLAG,DCFG_NEEDED,BL_COMM))
+$(eval $(call SET_NXP_MAKE_FLAG,CSU_NEEDED,BL_COMM))
+$(eval $(call SET_NXP_MAKE_FLAG,TIMER_NEEDED,BL_COMM))
+$(eval $(call SET_NXP_MAKE_FLAG,INTERCONNECT_NEEDED,BL_COMM))
+$(eval $(call SET_NXP_MAKE_FLAG,GIC_NEEDED,BL31))
+$(eval $(call SET_NXP_MAKE_FLAG,CONSOLE_NEEDED,BL_COMM))
+$(eval $(call SET_NXP_MAKE_FLAG,PMU_NEEDED,BL_COMM))
+$(eval $(call SET_NXP_MAKE_FLAG,DDR_DRIVER_NEEDED,BL2))
+$(eval $(call SET_NXP_MAKE_FLAG,TZASC_NEEDED,BL2))
+$(eval $(call SET_NXP_MAKE_FLAG,I2C_NEEDED,BL2))
+$(eval $(call SET_NXP_MAKE_FLAG,IMG_LOADR_NEEDED,BL2))
+
+# Selecting PSCI & SIP_SVC support
+$(eval $(call SET_NXP_MAKE_FLAG,PSCI_NEEDED,BL31))
+$(eval $(call SET_NXP_MAKE_FLAG,SIPSVC_NEEDED,BL31))
+
+# Source File Addition
+PLAT_INCLUDES += -I${PLAT_COMMON_PATH}/include/default\
+ -I${BOARD_PATH}\
+ -I${PLAT_COMMON_PATH}/include/default/ch_${CHASSIS}\
+ -I${PLAT_SOC_PATH}/include\
+ -I${PLAT_COMMON_PATH}/soc_errata
+
+ifeq (${SECURE_BOOT},yes)
+include ${PLAT_COMMON_PATH}/tbbr/tbbr.mk
+endif
+
+ifeq ($(WARM_BOOT),yes)
+include ${PLAT_COMMON_PATH}/warm_reset/warm_reset.mk
+endif
+
+ifeq (${NXP_NV_SW_MAINT_LAST_EXEC_DATA}, yes)
+include ${PLAT_COMMON_PATH}/nv_storage/nv_storage.mk
+endif
+
+ifeq (${PSCI_NEEDED}, yes)
+include ${PLAT_COMMON_PATH}/psci/psci.mk
+endif
+
+ifeq (${SIPSVC_NEEDED}, yes)
+include ${PLAT_COMMON_PATH}/sip_svc/sipsvc.mk
+endif
+
+# for fuse-fip & fuse-programming
+ifeq (${FUSE_PROG}, 1)
+include ${PLAT_COMMON_PATH}/fip_handler/fuse_fip/fuse.mk
+endif
+
+ifeq (${IMG_LOADR_NEEDED},yes)
+include $(PLAT_COMMON_PATH)/img_loadr/img_loadr.mk
+endif
+
+# Adding source files for the above selected drivers.
+include ${PLAT_DRIVERS_PATH}/drivers.mk
+
+# Adding SoC specific files
+include ${PLAT_COMMON_PATH}/soc_errata/errata.mk
+
+PLAT_INCLUDES += ${NV_STORAGE_INCLUDES}\
+ ${WARM_RST_INCLUDES}
+
+BL31_SOURCES += ${PLAT_SOC_PATH}/$(ARCH)/${SOC}.S\
+ ${WARM_RST_BL31_SOURCES}\
+ ${PSCI_SOURCES}\
+ ${SIPSVC_SOURCES}\
+ ${PLAT_COMMON_PATH}/$(ARCH)/bl31_data.S
+
+PLAT_BL_COMMON_SOURCES += ${PLAT_COMMON_PATH}/$(ARCH)/ls_helpers.S\
+ ${PLAT_SOC_PATH}/aarch64/${SOC}_helpers.S\
+ ${NV_STORAGE_SOURCES}\
+ ${WARM_RST_BL_COMM_SOURCES}\
+ ${PLAT_SOC_PATH}/soc.c
+
+ifeq (${TEST_BL31}, 1)
+BL31_SOURCES += ${PLAT_SOC_PATH}/$(ARCH)/bootmain64.S\
+ ${PLAT_SOC_PATH}/$(ARCH)/nonboot64.S
+endif
+
+BL2_SOURCES += ${DDR_CNTLR_SOURCES}\
+ ${TBBR_SOURCES}\
+ ${FUSE_SOURCES}
+
+# Adding TFA setup files
+include ${PLAT_PATH}/common/setup/common.mk