diff --git a/plat/nxp/soc-lx2160a/soc.def b/plat/nxp/soc-lx2160a/soc.def
new file mode 100644
index 0000000..bd0dd15
--- /dev/null
+++ b/plat/nxp/soc-lx2160a/soc.def
@@ -0,0 +1,201 @@
+#
+# Copyright (c) 2015, 2016 Freescale Semiconductor, Inc.
+# Copyright 2017-2020 NXP Semiconductors
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+#
+#------------------------------------------------------------------------------
+#
+# This file contains the basic architecture definitions that drive the build
+#
+# -----------------------------------------------------------------------------
+
+CORE_TYPE	:=	a72
+
+CACHE_LINE	:=	6
+
+# set to GIC400 or GIC500
+GIC		:=	GIC500
+
+# set to CCI400 or CCN504 or CCN508
+INTERCONNECT	:=	CCN508
+
+# indicate layerscape chassis level - set to 3=LSCH3 or 2=LSCH2
+CHASSIS		:=	3_2
+
+# TZC IP Details TZC used is TZC380 or TZC400
+TZC_ID		:=	TZC400
+
+# CONSOLE Details available is NS16550 or PL011
+CONSOLE		:=	PL011
+
+# Select the DDR PHY generation to be used
+PLAT_DDR_PHY	:=	PHY_GEN2
+
+PHYS_SYS	:=	64
+
+# Area of OCRAM reserved by ROM code
+NXP_ROM_RSVD	:= 0xa000
+
+# Max Size of CSF header. Required to define BL2 TEXT LIMIT in soc.def
+# Input to CST create_hdr_esbc tool
+CSF_HDR_SZ	:= 0x3000
+
+NXP_SFP_VER	:= 3_4
+
+# In IMAGE_BL2, compile time flag for handling Cache coherency
+# with CAAM for BL2 running from OCRAM
+SEC_MEM_NON_COHERENT	:= yes
+
+# Defining the endianness for NXP ESDHC
+NXP_ESDHC_ENDIANNESS	:= LE
+
+# Defining the endianness for NXP SFP
+NXP_SFP_ENDIANNESS	:= LE
+
+# Defining the endianness for NXP GPIO
+NXP_GPIO_ENDIANNESS	:= LE
+
+# Defining the endianness for NXP SNVS
+NXP_SNVS_ENDIANNESS	:= LE
+
+# Defining the endianness for NXP CCSR GUR register
+NXP_GUR_ENDIANNESS	:= LE
+
+# Defining the endianness for NXP FSPI register
+NXP_FSPI_ENDIANNESS	:= LE
+
+# Defining the endianness for NXP SEC
+NXP_SEC_ENDIANNESS	:= LE
+
+# Defining the endianness for NXP DDR
+NXP_DDR_ENDIANNESS	:= LE
+
+NXP_DDR_INTLV_256B	:= 1
+
+# OCRAM MAP for BL2
+# Before BL2
+# 0x18000000 - 0x18009fff -> Used by ROM code
+# 0x1800a000 - 0x1800dfff -> CSF header for BL2
+# (The above area i.e 0x18000000 - 0x1800dfff is available
+#  for DDR PHY images scratch pad region during BL2 run time)
+# For FlexSPI boot
+# 0x1800e000 - 0x18040000 -> Reserved for BL2 binary
+# For SD boot
+# 0x1800e000 - 0x18030000 -> Reserved for BL2 binary
+# 0x18030000 - 0x18040000 -> Reserved for SD buffer
+OCRAM_START_ADDR := 0x18000000
+OCRAM_SIZE := 0x40000
+
+# Location of BL2 on OCRAM
+BL2_BASE_ADDR	:=	$(shell echo $$(( $(OCRAM_START_ADDR) + $(NXP_ROM_RSVD) + $(CSF_HDR_SZ) )))
+# Covert to HEX to be used by create_pbl.mk
+BL2_BASE	:=	$$(echo "obase=16; ${BL2_BASE_ADDR}" | bc)
+
+# BL2_HDR_LOC is at  (OCRAM_ADDR + NXP_ROM_RSVD)
+# This value BL2_HDR_LOC + CSF_HDR_SZ should not overalp with BL2_BASE
+BL2_HDR_LOC_HDR	?=	$(shell echo $$(( $(OCRAM_START_ADDR) + $(NXP_ROM_RSVD) )))
+# Covert to HEX to be used by create_pbl.mk
+BL2_HDR_LOC	:=	$$(echo "obase=16; ${BL2_HDR_LOC_HDR}" | bc)
+
+# SoC ERRATAS to be enabled
+#
+# Core Errata
+ERRATA_A72_859971	:= 1
+
+# SoC Errata
+ERRATA_SOC_A050426	:= 1
+
+ifneq (${CACHE_LINE},)
+$(eval $(call add_define_val,PLATFORM_CACHE_LINE_SHIFT,${CACHE_LINE}))
+$(eval CACHE_WRITEBACK_GRANULE=$(shell echo $$((1 << $(CACHE_LINE)))))
+$(eval $(call add_define_val,CACHE_WRITEBACK_GRANULE,$(CACHE_WRITEBACK_GRANULE)))
+endif
+
+ifneq (${INTERCONNECT},)
+$(eval $(call add_define,NXP_HAS_CCN508))
+endif
+
+ifneq (${CHASSIS},)
+$(eval $(call add_define,CONFIG_CHASSIS_${CHASSIS}))
+endif
+
+ifneq (${PLAT_DDR_PHY},)
+$(eval $(call add_define,NXP_DDR_${PLAT_DDR_PHY}))
+endif
+
+ifneq (${PHYS_SYS},)
+$(eval $(call add_define,CONFIG_PHYS_64BIT))
+endif
+
+ifneq (${CSF_HDR_SZ},)
+$(eval $(call add_define_val,CSF_HDR_SZ,${CSF_HDR_SZ}))
+endif
+
+ifneq (${OCRAM_START_ADDR},)
+$(eval $(call add_define_val,NXP_OCRAM_ADDR,${OCRAM_START_ADDR}))
+endif
+
+ifneq (${OCRAM_SIZE},)
+$(eval $(call add_define_val,NXP_OCRAM_SIZE,${OCRAM_SIZE}))
+endif
+
+ifneq (${NXP_ROM_RSVD},)
+$(eval $(call add_define_val,NXP_ROM_RSVD,${NXP_ROM_RSVD}))
+endif
+
+ifneq (${BL2_BASE_ADDR},)
+$(eval $(call add_define_val,BL2_BASE,${BL2_BASE_ADDR}))
+endif
+
+ifeq (${SEC_MEM_NON_COHERENT},yes)
+$(eval $(call add_define,SEC_MEM_NON_COHERENT))
+endif
+
+ifneq (${NXP_ESDHC_ENDIANNESS},)
+$(eval $(call add_define,NXP_ESDHC_${NXP_ESDHC_ENDIANNESS}))
+endif
+
+ifneq (${NXP_SFP_VER},)
+$(eval $(call add_define,NXP_SFP_VER_${NXP_SFP_VER}))
+endif
+
+ifneq (${NXP_SFP_ENDIANNESS},)
+$(eval $(call add_define,NXP_SFP_${NXP_SFP_ENDIANNESS}))
+endif
+
+ifneq (${NXP_GPIO_ENDIANNESS},)
+$(eval $(call add_define,NXP_GPIO_${NXP_GPIO_ENDIANNESS}))
+endif
+
+ifneq (${NXP_SNVS_ENDIANNESS},)
+$(eval $(call add_define,NXP_SNVS_${NXP_SNVS_ENDIANNESS}))
+endif
+
+ifneq (${NXP_GUR_ENDIANNESS},)
+$(eval $(call add_define,NXP_GUR_${NXP_GUR_ENDIANNESS}))
+endif
+
+ifneq (${NXP_FSPI_ENDIANNESS},)
+$(eval $(call add_define,NXP_FSPI_${NXP_FSPI_ENDIANNESS}))
+endif
+
+# enable dynamic memory mapping
+PLAT_XLAT_TABLES_DYNAMIC :=	1
+
+ifneq (${NXP_SEC_ENDIANNESS},)
+$(eval $(call add_define,NXP_SEC_${NXP_SEC_ENDIANNESS}))
+endif
+
+ifneq (${NXP_DDR_ENDIANNESS},)
+$(eval $(call add_define,NXP_DDR_${NXP_DDR_ENDIANNESS}))
+endif
+
+ifneq (${NXP_DDR_INTLV_256B},)
+$(eval $(call add_define,NXP_DDR_INTLV_256B))
+endif
+
+ifneq (${PLAT_XLAT_TABLES_DYNAMIC},)
+$(eval $(call add_define,PLAT_XLAT_TABLES_DYNAMIC))
+endif