feat(amu): enable per-core AMU auxiliary counters
This change makes AMU auxiliary counters configurable on a per-core
basis, controlled by `ENABLE_AMU_AUXILIARY_COUNTERS`.
Auxiliary counters can be described via the `HW_CONFIG` device tree if
the `ENABLE_AMU_FCONF` build option is enabled, or the platform must
otherwise implement the `plat_amu_topology` function.
A new phandle property for `cpu` nodes (`amu`) has been introduced to
the `HW_CONFIG` specification to allow CPUs to describe the view of
their own AMU:
```
cpu0: cpu@0 {
...
amu = <&cpu0_amu>;
};
```
Multiple cores may share an `amu` handle if they implement the
same set of auxiliary counters.
AMU counters are described for one or more AMUs through the use of a new
`amus` node:
```
amus {
cpu0_amu: amu-0 {
#address-cells = <1>;
#size-cells = <0>;
counter@0 {
reg = <0>;
enable-at-el3;
};
counter@n {
reg = <n>;
...
};
};
};
```
This structure describes the **auxiliary** (group 1) AMU counters.
Architected counters have architecturally-defined behaviour, and as
such do not require DTB entries.
These `counter` nodes support two properties:
- The `reg` property represents the counter register index.
- The presence of the `enable-at-el3` property determines whether
the firmware should enable the counter prior to exiting EL3.
Change-Id: Ie43aee010518c5725a3b338a4899b0857caf4c28
Signed-off-by: Chris Kay <chris.kay@arm.com>
diff --git a/lib/extensions/amu/aarch32/amu.c b/lib/extensions/amu/aarch32/amu.c
index e92b9f1..57b1158 100644
--- a/lib/extensions/amu/aarch32/amu.c
+++ b/lib/extensions/amu/aarch32/amu.c
@@ -11,6 +11,7 @@
#include "../amu_private.h"
#include <arch.h>
#include <arch_helpers.h>
+#include <common/debug.h>
#include <lib/el3_runtime/pubsub_events.h>
#include <lib/extensions/amu.h>
@@ -182,6 +183,30 @@
assert(amcgcr_cg0nc <= AMU_AMCGCR_CG0NC_MAX);
/*
+ * The platform may opt to enable specific auxiliary counters. This can
+ * be done via the common FCONF getter, or via the platform-implemented
+ * function.
+ */
+
+#if ENABLE_AMU_AUXILIARY_COUNTERS
+ const struct amu_topology *topology;
+
+#if ENABLE_AMU_FCONF
+ topology = FCONF_GET_PROPERTY(amu, config, topology);
+#else
+ topology = plat_amu_topology();
+#endif /* ENABLE_AMU_FCONF */
+
+ if (topology != NULL) {
+ unsigned int core_pos = plat_my_core_pos();
+
+ amcntenset1_el0_px = topology->cores[core_pos].enable;
+ } else {
+ ERROR("AMU: failed to generate AMU topology\n");
+ }
+#endif /* ENABLE_AMU_AUXILIARY_COUNTERS */
+
+ /*
* Enable the requested counters.
*/
@@ -190,6 +215,10 @@
amcfgr_ncg = read_amcfgr_ncg();
if (amcfgr_ncg > 0U) {
write_amcntenset1_px(amcntenset1_px);
+
+#if !ENABLE_AMU_AUXILIARY_COUNTERS
+ VERBOSE("AMU: auxiliary counters detected but support is disabled\n");
+#endif
}
/* Initialize FEAT_AMUv1p1 features if present. */
diff --git a/lib/extensions/amu/aarch64/amu.c b/lib/extensions/amu/aarch64/amu.c
index 58094ae..f712520 100644
--- a/lib/extensions/amu/aarch64/amu.c
+++ b/lib/extensions/amu/aarch64/amu.c
@@ -12,11 +12,17 @@
#include <arch.h>
#include <arch_features.h>
#include <arch_helpers.h>
+#include <common/debug.h>
#include <lib/el3_runtime/pubsub_events.h>
#include <lib/extensions/amu.h>
#include <plat/common/platform.h>
+#if ENABLE_AMU_FCONF
+# include <lib/fconf/fconf.h>
+# include <lib/fconf/fconf_amu_getter.h>
+#endif
+
struct amu_ctx {
uint64_t group0_cnts[AMU_GROUP0_MAX_COUNTERS];
#if ENABLE_AMU_AUXILIARY_COUNTERS
@@ -227,6 +233,30 @@
assert(amcgcr_el0_cg0nc <= AMU_AMCGCR_CG0NC_MAX);
/*
+ * The platform may opt to enable specific auxiliary counters. This can
+ * be done via the common FCONF getter, or via the platform-implemented
+ * function.
+ */
+
+#if ENABLE_AMU_AUXILIARY_COUNTERS
+ const struct amu_topology *topology;
+
+#if ENABLE_AMU_FCONF
+ topology = FCONF_GET_PROPERTY(amu, config, topology);
+#else
+ topology = plat_amu_topology();
+#endif /* ENABLE_AMU_FCONF */
+
+ if (topology != NULL) {
+ unsigned int core_pos = plat_my_core_pos();
+
+ amcntenset1_el0_px = topology->cores[core_pos].enable;
+ } else {
+ ERROR("AMU: failed to generate AMU topology\n");
+ }
+#endif /* ENABLE_AMU_AUXILIARY_COUNTERS */
+
+ /*
* Enable the requested counters.
*/
@@ -235,6 +265,10 @@
amcfgr_el0_ncg = read_amcfgr_el0_ncg();
if (amcfgr_el0_ncg > 0U) {
write_amcntenset1_el0_px(amcntenset1_el0_px);
+
+#if !ENABLE_AMU_AUXILIARY_COUNTERS
+ VERBOSE("AMU: auxiliary counters detected but support is disabled\n");
+#endif
}
/* Initialize FEAT_AMUv1p1 features if present. */
diff --git a/lib/extensions/amu/amu.mk b/lib/extensions/amu/amu.mk
index b4e04dd..0d203cb 100644
--- a/lib/extensions/amu/amu.mk
+++ b/lib/extensions/amu/amu.mk
@@ -4,5 +4,21 @@
# SPDX-License-Identifier: BSD-3-Clause
#
+include lib/fconf/fconf.mk
+
AMU_SOURCES := lib/extensions/amu/${ARCH}/amu.c \
lib/extensions/amu/${ARCH}/amu_helpers.S
+
+ifneq (${ENABLE_AMU_AUXILIARY_COUNTERS},0)
+ ifeq (${ENABLE_AMU},0)
+ $(error AMU auxiliary counter support (`ENABLE_AMU_AUXILIARY_COUNTERS`) requires AMU support (`ENABLE_AMU`))
+ endif
+endif
+
+ifneq (${ENABLE_AMU_FCONF},0)
+ ifeq (${ENABLE_AMU_AUXILIARY_COUNTERS},0)
+ $(error AMU FCONF support (`ENABLE_AMU_FCONF`) is not necessary when auxiliary counter support (`ENABLE_AMU_AUXILIARY_COUNTERS`) is disabled)
+ endif
+
+ AMU_SOURCES += ${FCONF_AMU_SOURCES}
+endif
diff --git a/lib/extensions/amu/amu_fconf.c b/lib/extensions/amu/amu_fconf.c
new file mode 100644
index 0000000..c7fb803
--- /dev/null
+++ b/lib/extensions/amu/amu_fconf.c
@@ -0,0 +1,200 @@
+/*
+ * Copyright (c) 2021, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stddef.h>
+#include <stdint.h>
+
+#include "amu_private.h"
+#include <common/debug.h>
+#include <common/fdt_wrappers.h>
+#include <lib/extensions/amu.h>
+#include <lib/fconf/fconf.h>
+#include <libfdt.h>
+
+#include <plat/common/platform.h>
+
+static bool amu_topology_populated_ ; /* Whether the topology is valid */
+static struct amu_fconf_topology amu_topology_; /* Populated topology cache */
+
+const struct amu_fconf_topology *amu_topology(void)
+{
+ if (!amu_topology_populated_) {
+ return NULL;
+ }
+
+ return &amu_topology_;
+}
+
+/*
+ * Populate the core-specific AMU structure with information retrieved from a
+ * device tree.
+ *
+ * Returns `0` on success, or a negative integer representing an error code.
+ */
+static int amu_fconf_populate_cpu_amu(const void *fdt, int parent,
+ struct amu_fconf_core *amu)
+{
+ int ret = 0;
+ int node = 0;
+
+ fdt_for_each_subnode(node, fdt, parent) {
+ const char *name;
+ const char *value;
+ int len;
+
+ uintptr_t idx = 0U;
+
+ name = fdt_get_name(fdt, node, &len);
+ if (strncmp(name, "counter@", 8) != 0) {
+ continue;
+ }
+
+ ret = fdt_get_reg_props_by_index(fdt, node, 0, &idx, NULL);
+ if (ret < 0) {
+ break;
+ }
+
+ value = fdt_getprop(fdt, node, "enable-at-el3", &len);
+ if ((value == NULL) && (len != -FDT_ERR_NOTFOUND)) {
+ break;
+ }
+
+ if (len != -FDT_ERR_NOTFOUND) {
+ amu->enable |= (1 << idx);
+ }
+ }
+
+ if ((node < 0) && (node != -FDT_ERR_NOTFOUND)) {
+ return node;
+ }
+
+ return ret;
+}
+
+/*
+ * Within a `cpu` node, attempt to dereference the `amu` property, and populate
+ * the AMU information for the core.
+ *
+ * Returns `0` on success, or a negative integer representing an error code.
+ */
+static int amu_fconf_populate_cpu(const void *fdt, int node, uintptr_t mpidr)
+{
+ int ret;
+ int idx;
+
+ uint32_t amu_phandle;
+ struct amu_fconf_core *amu;
+
+ ret = fdt_read_uint32(fdt, node, "amu", &amu_phandle);
+ if (ret < 0) {
+ if (ret == -FDT_ERR_NOTFOUND) {
+ ret = 0;
+ }
+
+ return ret;
+ }
+
+ node = fdt_node_offset_by_phandle(fdt, amu_phandle);
+ if (node < 0) {
+ return node;
+ }
+
+ idx = plat_core_pos_by_mpidr(mpidr);
+ amu = &amu_topology_.cores[idx];
+
+ return amu_fconf_populate_cpu_amu(fdt, node, amu);
+}
+
+/*
+ * For every CPU node (`/cpus/cpu@n`) in an FDT, executes a callback passing a
+ * pointer to the FDT and the offset of the CPU node. If the return value of the
+ * callback is negative, it is treated as an error and the loop is aborted. In
+ * this situation, the value of the callback is returned from the function.
+ *
+ * Returns `0` on success, or a negative integer representing an error code.
+ */
+static int amu_fconf_foreach_cpu(const void *fdt,
+ int (*callback)(const void *, int, uintptr_t))
+{
+ int ret = 0;
+ int parent, node = 0;
+
+ parent = fdt_path_offset(fdt, "/cpus");
+ if (parent < 0) {
+ if (parent == -FDT_ERR_NOTFOUND) {
+ parent = 0;
+ }
+
+ return parent;
+ }
+
+ fdt_for_each_subnode(node, fdt, parent) {
+ const char *name;
+ int len;
+
+ uintptr_t mpidr = 0U;
+
+ name = fdt_get_name(fdt, node, &len);
+ if (strncmp(name, "cpu@", 4) != 0) {
+ continue;
+ }
+
+ ret = fdt_get_reg_props_by_index(fdt, node, 0, &mpidr, NULL);
+ if (ret < 0) {
+ break;
+ }
+
+ ret = callback(fdt, node, mpidr);
+ if (ret < 0) {
+ break;
+ }
+ }
+
+ if ((node < 0) && (node != -FDT_ERR_NOTFOUND)) {
+ return node;
+ }
+
+ return ret;
+}
+
+/*
+ * Populates the global `amu_topology` structure based on what's described by
+ * the hardware configuration device tree blob.
+ *
+ * The device tree is expected to provide an `amu` property for each `cpu` node,
+ * like so:
+ *
+ * cpu@0 {
+ * amu = <&cpu0_amu>;
+ * };
+ *
+ * amus {
+ * cpu0_amu: amu-0 {
+ * counters {
+ * #address-cells = <2>;
+ * #size-cells = <0>;
+ *
+ * counter@x,y {
+ * reg = <x y>; // Group x, counter y
+ * };
+ * };
+ * };
+ * };
+ */
+static int amu_fconf_populate(uintptr_t config)
+{
+ int ret = amu_fconf_foreach_cpu(
+ (const void *)config, amu_fconf_populate_cpu);
+ if (ret < 0) {
+ ERROR("AMU-FCONF: Failed to configure AMU: %d\n", ret);
+ } else {
+ amu_topology_populated_ = true;
+ }
+
+ return ret;
+}
+
+FCONF_REGISTER_POPULATOR(HW_CONFIG, amu, amu_fconf_populate);