plat/marvell: a8k: move efuse definitions to separate header
Move efuse definitions to a separate header file for later
usage with other FW modules.
Change-Id: I2e9465f760d0388c8e5863bc64a4cdc57de2417f
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-on: https://sj1git1.cavium.com/c/IP/SW/boot/atf/+/47313
Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com>
Reviewed-by: Yi Guo <yi.guo@cavium.com>
diff --git a/include/plat/marvell/armada/a8k/common/efuse_def.h b/include/plat/marvell/armada/a8k/common/efuse_def.h
new file mode 100644
index 0000000..ff1d4a3
--- /dev/null
+++ b/include/plat/marvell/armada/a8k/common/efuse_def.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2021 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef EFUSE_DEF_H
+#define EFUSE_DEF_H
+
+#include <platform_def.h>
+
+#define MVEBU_AP_EFUSE_SRV_CTRL_REG (MVEBU_AP_GEN_MGMT_BASE + 0x8)
+#define EFUSE_SRV_CTRL_LD_SELECT_OFFS 6
+#define EFUSE_SRV_CTRL_LD_SELECT_MASK (1 << EFUSE_SRV_CTRL_LD_SELECT_OFFS)
+
+#define MVEBU_AP_LD_EFUSE_BASE (MVEBU_AP_GEN_MGMT_BASE + 0xF00)
+/* Bits [31:0] - 32 data bits total */
+#define MVEBU_AP_LDX_31_0_EFUSE_OFFS (MVEBU_AP_LD_EFUSE_BASE)
+/* Bits [62:32] - 31 data bits total 32nd bit is parity for bits [62:0]*/
+#define MVEBU_AP_LDX_62_32_EFUSE_OFFS (MVEBU_AP_LD_EFUSE_BASE + 0x4)
+/* Bits [94:63] - 32 data bits total */
+#define MVEBU_AP_LDX_94_63_EFUSE_OFFS (MVEBU_AP_LD_EFUSE_BASE + 0x8)
+/* Bits [125:95] - 31 data bits total, 32nd bit is parity for bits [125:63] */
+#define MVEBU_AP_LDX_125_95_EFUSE_OFFS (MVEBU_AP_LD_EFUSE_BASE + 0xC)
+/* Bits [157:126] - 32 data bits total */
+#define MVEBU_AP_LDX_126_157_EFUSE_OFFS (MVEBU_AP_LD_EFUSE_BASE + 0x10)
+/* Bits [188:158] - 31 data bits total, 32nd bit is parity for bits [188:126] */
+#define MVEBU_AP_LDX_188_158_EFUSE_OFFS (MVEBU_AP_LD_EFUSE_BASE + 0x14)
+/* Bits [220:189] - 32 data bits total */
+#define MVEBU_AP_LDX_220_189_EFUSE_OFFS (MVEBU_AP_LD_EFUSE_BASE + 0x18)
+
+#endif /* EFUSE_DEF_H */
diff --git a/plat/marvell/armada/a8k/common/include/a8k_plat_def.h b/plat/marvell/armada/a8k/common/include/a8k_plat_def.h
index de80315..3a0fd4b 100644
--- a/plat/marvell/armada/a8k/common/include/a8k_plat_def.h
+++ b/plat/marvell/armada/a8k/common/include/a8k_plat_def.h
@@ -64,7 +64,8 @@
#define MVEBU_AP_GPIO_DATA_IN (MVEBU_AP_GPIO_REGS + 0x10)
#define MVEBU_AP_I2C_BASE (MVEBU_REGS_BASE + 0x511000)
#define MVEBU_CP0_I2C_BASE (MVEBU_CP_REGS_BASE(0) + 0x701000)
-#define MVEBU_AP_EXT_TSEN_BASE (MVEBU_RFU_BASE + 0x8084)
+#define MVEBU_AP_GEN_MGMT_BASE (MVEBU_RFU_BASE + 0x8000)
+#define MVEBU_AP_EXT_TSEN_BASE (MVEBU_AP_GEN_MGMT_BASE + 0x84)
#define MVEBU_AP_MC_TRUSTZONE_REG_LOW(ap, win) (MVEBU_REGS_BASE_AP(ap) + \
0x20080 + ((win) * 0x8))
diff --git a/plat/marvell/armada/a8k/common/plat_ble_setup.c b/plat/marvell/armada/a8k/common/plat_ble_setup.c
index 59a3a3a..9c5ee15 100644
--- a/plat/marvell/armada/a8k/common/plat_ble_setup.c
+++ b/plat/marvell/armada/a8k/common/plat_ble_setup.c
@@ -14,6 +14,7 @@
#include <drivers/marvell/mochi/cp110_setup.h>
#include <armada_common.h>
+#include <efuse_def.h>
#include <mv_ddr_if.h>
#include <mvebu_def.h>
#include <plat_marvell.h>
@@ -27,7 +28,6 @@
#define MMAP_RESTORE_SAVED 1
/* SAR clock settings */
-#define MVEBU_AP_GEN_MGMT_BASE (MVEBU_RFU_BASE + 0x8000)
#define MVEBU_AP_SAR_REG_BASE(r) (MVEBU_AP_GEN_MGMT_BASE + 0x200 +\
((r) << 2))
@@ -82,11 +82,6 @@
(0x1 << AVS_SOFT_RESET_OFFSET) | \
(0x1 << AVS_ENABLE_OFFSET))
-#define MVEBU_AP_EFUSE_SRV_CTRL_REG (MVEBU_AP_GEN_MGMT_BASE + 0x8)
-#define EFUSE_SRV_CTRL_LD_SELECT_OFFS 6
-#define EFUSE_SRV_CTRL_LD_SEL_USER_MASK (1 << EFUSE_SRV_CTRL_LD_SELECT_OFFS)
-
-
/*
* - Identification information in the LD-0 eFuse:
* DRO: LD0[74:65] - Not used by the SW
@@ -96,14 +91,7 @@
* Cluster 1 PWR: LD0[193] - if set to 1, power down CPU Cluster-1
* resulting in 2 CPUs active only (7020)
*/
-#define MVEBU_AP_LD_EFUSE_BASE (MVEBU_AP_GEN_MGMT_BASE + 0xF00)
-/* Bits [94:63] - 32 data bits total */
-#define MVEBU_AP_LD0_94_63_EFUSE_OFFS (MVEBU_AP_LD_EFUSE_BASE + 0x8)
-/* Bits [125:95] - 31 data bits total, 32nd bit is parity for bits [125:63] */
-#define MVEBU_AP_LD0_125_95_EFUSE_OFFS (MVEBU_AP_LD_EFUSE_BASE + 0xC)
-/* Bits [220:189] - 32 data bits total */
-#define MVEBU_AP_LD0_220_189_EFUSE_OFFS (MVEBU_AP_LD_EFUSE_BASE + 0x18)
-/* Offsets for the above 2 fields combined into single 64-bit value [125:63] */
+/* Offsets for 2 efuse fields combined into single 64-bit value [125:63] */
#define EFUSE_AP_LD0_DRO_OFFS 2 /* LD0[74:65] */
#define EFUSE_AP_LD0_DRO_MASK 0x3FF
#define EFUSE_AP_LD0_REVID_OFFS 12 /* LD0[78:75] */
@@ -376,20 +364,20 @@
uint8_t avs_data_bits, min_sw_ver, svc_fields;
unsigned int ap_type;
- /* Set access to LD0 */
+ /* Get test EERPOM data */
avs_workpoint = avs_update_from_eeprom(0);
if (avs_workpoint)
goto set_aws_wp;
/* Set access to LD0 */
reg_val = mmio_read_32(MVEBU_AP_EFUSE_SRV_CTRL_REG);
- reg_val &= ~EFUSE_SRV_CTRL_LD_SEL_USER_MASK;
+ reg_val &= ~EFUSE_SRV_CTRL_LD_SELECT_MASK;
mmio_write_32(MVEBU_AP_EFUSE_SRV_CTRL_REG, reg_val);
/* Obtain the value of LD0[125:63] */
- efuse = mmio_read_32(MVEBU_AP_LD0_125_95_EFUSE_OFFS);
+ efuse = mmio_read_32(MVEBU_AP_LDX_125_95_EFUSE_OFFS);
efuse <<= 32;
- efuse |= mmio_read_32(MVEBU_AP_LD0_94_63_EFUSE_OFFS);
+ efuse |= mmio_read_32(MVEBU_AP_LDX_94_63_EFUSE_OFFS);
/* SW Revision:
* Starting from SW revision 1 the SVC flow is supported.
@@ -452,7 +440,7 @@
perr[i] = 1; /* register the error */
}
- single_cluster = mmio_read_32(MVEBU_AP_LD0_220_189_EFUSE_OFFS);
+ single_cluster = mmio_read_32(MVEBU_AP_LDX_220_189_EFUSE_OFFS);
single_cluster = (single_cluster >> EFUSE_AP_LD0_CLUSTER_DOWN_OFFS) & 1;
device_id = cp110_device_id_get(MVEBU_CP_REGS_BASE(0));