diff --git a/plat/arm/board/fvp/include/platform_def.h b/plat/arm/board/fvp/include/platform_def.h
index 7a538e9..780e6fc 100644
--- a/plat/arm/board/fvp/include/platform_def.h
+++ b/plat/arm/board/fvp/include/platform_def.h
@@ -176,9 +176,6 @@
 #define PLAT_ARM_RUN_UART_BASE		V2M_IOFPGA_UART1_BASE
 #define PLAT_ARM_RUN_UART_CLK_IN_HZ	V2M_IOFPGA_UART1_CLK_IN_HZ
 
-#define PLAT_ARM_SP_MIN_RUN_UART_BASE		V2M_IOFPGA_UART1_BASE
-#define PLAT_ARM_SP_MIN_RUN_UART_CLK_IN_HZ	V2M_IOFPGA_UART1_CLK_IN_HZ
-
 #define PLAT_ARM_CRASH_UART_BASE	PLAT_ARM_RUN_UART_BASE
 #define PLAT_ARM_CRASH_UART_CLK_IN_HZ	PLAT_ARM_RUN_UART_CLK_IN_HZ
 
diff --git a/plat/arm/board/fvp_ve/aarch32/fvp_ve_helpers.S b/plat/arm/board/fvp_ve/aarch32/fvp_ve_helpers.S
new file mode 100644
index 0000000..78f6c68
--- /dev/null
+++ b/plat/arm/board/fvp_ve/aarch32/fvp_ve_helpers.S
@@ -0,0 +1,62 @@
+/*
+ * Copyright (c) 2019, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+#include <platform_def.h>
+
+	.globl	plat_secondary_cold_boot_setup
+	.globl	plat_get_my_entrypoint
+	.globl	plat_is_my_cpu_primary
+
+	/* --------------------------------------------------------------------
+	 * void plat_secondary_cold_boot_setup (void);
+	 *
+	 * For AArch32, cold-booting secondary CPUs is not yet
+	 * implemented and they panic.
+	 * --------------------------------------------------------------------
+	 */
+func plat_secondary_cold_boot_setup
+cb_panic:
+	b	cb_panic
+endfunc plat_secondary_cold_boot_setup
+
+	/* ---------------------------------------------------------------------
+	 * unsigned long plat_get_my_entrypoint (void);
+	 *
+	 * Main job of this routine is to distinguish between a cold and warm
+	 * boot. On FVP, this information can be queried from the power
+	 * controller. The Power Control SYS Status Register (PSYSR) indicates
+	 * the wake-up reason for the CPU.
+	 *
+	 * For a cold boot, return 0.
+	 * For a warm boot, read the mailbox and return the address it contains.
+	 *
+	 * TODO: PSYSR is a common register and should be
+	 * 	accessed using locks. Since it is not possible
+	 * 	to use locks immediately after a cold reset
+	 * 	we are relying on the fact that after a cold
+	 * 	reset all cpus will read the same WK field
+	 * ---------------------------------------------------------------------
+	 */
+func plat_get_my_entrypoint
+	/* TODO support warm boot */
+	/* Cold reset */
+	mov	r0, #0
+	bx	lr
+
+endfunc plat_get_my_entrypoint
+
+	/* -----------------------------------------------------
+	 * unsigned int plat_is_my_cpu_primary (void);
+	 *
+	 * Currently configured for a sigle CPU
+	 * -----------------------------------------------------
+	 */
+func plat_is_my_cpu_primary
+	mov	r0, #1
+	bx	lr
+endfunc plat_is_my_cpu_primary
diff --git a/plat/arm/board/fvp_ve/fdts/fvp_ve_tb_fw_config.dts b/plat/arm/board/fvp_ve/fdts/fvp_ve_tb_fw_config.dts
new file mode 100644
index 0000000..9ab2d96
--- /dev/null
+++ b/plat/arm/board/fvp_ve/fdts/fvp_ve_tb_fw_config.dts
@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2019, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/dts-v1/;
+
+/ {
+	/* Platform Config */
+	plat_arm_bl2 {
+		compatible = "arm,tb_fw";
+		hw_config_addr = <0x0 0x82000000>;
+		hw_config_max_size = <0x01000000>;
+		/* Disable authentication for development */
+		disable_auth = <0x0>;
+	};
+};
diff --git a/plat/arm/board/fvp_ve/fvp_ve_bl1_setup.c b/plat/arm/board/fvp_ve/fvp_ve_bl1_setup.c
new file mode 100644
index 0000000..47cd876
--- /dev/null
+++ b/plat/arm/board/fvp_ve/fvp_ve_bl1_setup.c
@@ -0,0 +1,16 @@
+/*
+ * Copyright (c) 2019, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <plat/arm/common/plat_arm.h>
+#include <plat/common/platform.h>
+
+/*******************************************************************************
+ * Perform any BL1 specific platform actions.
+ ******************************************************************************/
+void bl1_early_platform_setup(void)
+{
+	arm_bl1_early_platform_setup();
+}
diff --git a/plat/arm/board/fvp_ve/fvp_ve_bl2_setup.c b/plat/arm/board/fvp_ve/fvp_ve_bl2_setup.c
new file mode 100644
index 0000000..25e0964
--- /dev/null
+++ b/plat/arm/board/fvp_ve/fvp_ve_bl2_setup.c
@@ -0,0 +1,41 @@
+/*
+ * Copyright (c) 2019, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <drivers/arm/sp804_delay_timer.h>
+#include <drivers/generic_delay_timer.h>
+#include <lib/mmio.h>
+#include <plat/arm/common/plat_arm.h>
+#include <plat/common/platform.h>
+#include <platform_def.h>
+
+#include "fvp_ve_private.h"
+
+void bl2_early_platform_setup2(u_register_t arg0, u_register_t arg1, u_register_t arg2, u_register_t arg3)
+{
+	arm_bl2_early_platform_setup((uintptr_t)arg0, (meminfo_t *)arg1);
+
+	/* Initialize the platform config for future decision making */
+	fvp_ve_config_setup();
+}
+
+void bl2_platform_setup(void)
+{
+	arm_bl2_platform_setup();
+
+#ifdef FVP_VE_USE_SP804_TIMER
+	/*
+	 * Enable the clock override for SP804 timer 0, which means that no
+	 * clock dividers are applied and the raw (35 MHz) clock will be used
+	 */
+	mmio_write_32(V2M_SP810_BASE, FVP_SP810_CTRL_TIM0_OV);
+
+	/* Initialize delay timer driver using SP804 dual timer 0 */
+	sp804_timer_init(V2M_SP804_TIMER0_BASE,
+			SP804_TIMER_CLKMULT, SP804_TIMER_CLKDIV);
+#else
+	generic_delay_timer_init();
+#endif /* FVP_VE_USE_SP804_TIMER */
+}
diff --git a/plat/arm/board/fvp_ve/fvp_ve_common.c b/plat/arm/board/fvp_ve/fvp_ve_common.c
new file mode 100644
index 0000000..768dad5
--- /dev/null
+++ b/plat/arm/board/fvp_ve/fvp_ve_common.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright (c) 2019, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <common/debug.h>
+#include <lib/mmio.h>
+#include <platform_def.h>
+#include <plat/arm/common/arm_config.h>
+#include <plat/arm/common/plat_arm.h>
+
+#define MAP_DEVICE0	MAP_REGION_FLAT(DEVICE0_BASE,			\
+					DEVICE0_SIZE,			\
+					MT_DEVICE | MT_RW | MT_SECURE)
+
+#ifdef IMAGE_BL1
+const mmap_region_t plat_arm_mmap[] = {
+	ARM_MAP_SHARED_RAM,
+	V2M_MAP_FLASH1_RW,
+	V2M_MAP_IOFPGA,
+	{0}
+};
+#endif
+#ifdef IMAGE_BL2
+const mmap_region_t plat_arm_mmap[] = {
+	ARM_MAP_SHARED_RAM,
+	V2M_MAP_FLASH1_RW,
+	V2M_MAP_IOFPGA,
+	ARM_MAP_NS_DRAM1,
+	{0}
+};
+#endif
+#ifdef IMAGE_BL32
+const mmap_region_t plat_arm_mmap[] = {
+	ARM_MAP_SHARED_RAM,
+	V2M_MAP_IOFPGA,
+	MAP_DEVICE0,
+	{0}
+};
+#endif
+
+ARM_CASSERT_MMAP
+
+void __init fvp_ve_config_setup(void)
+{
+	unsigned int sys_id, arch;
+
+	sys_id = mmio_read_32(V2M_SYSREGS_BASE + V2M_SYS_ID);
+	arch = (sys_id >> V2M_SYS_ID_ARCH_SHIFT) & V2M_SYS_ID_ARCH_MASK;
+
+	if (arch != ARCH_MODEL_VE) {
+		ERROR("This firmware is for FVP VE models\n");
+		panic();
+	}
+}
+
+unsigned int plat_get_syscnt_freq2(void)
+{
+	return FVP_VE_TIMER_BASE_FREQUENCY;
+}
diff --git a/plat/arm/board/fvp_ve/fvp_ve_def.h b/plat/arm/board/fvp_ve/fvp_ve_def.h
new file mode 100644
index 0000000..fa13058
--- /dev/null
+++ b/plat/arm/board/fvp_ve/fvp_ve_def.h
@@ -0,0 +1,80 @@
+/*
+ * Copyright (c) 2019, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef FVP_VE_DEF_H
+#define FVP_VE_DEF_H
+
+#include <lib/utils_def.h>
+
+/* Default cluster count for FVP VE */
+#define FVP_VE_CLUSTER_COUNT	1
+
+/* Default number of CPUs per cluster on FVP VE */
+#define FVP_VE_MAX_CPUS_PER_CLUSTER	1
+
+/* Default number of threads per CPU on FVP VE */
+#define FVP_VE_MAX_PE_PER_CPU	1
+
+#define FVP_VE_CORE_COUNT 1
+
+#define FVP_VE_PRIMARY_CPU			0x0
+
+/*******************************************************************************
+ * FVP memory map related constants
+ ******************************************************************************/
+
+#define FLASH1_BASE			0x0c000000
+#define FLASH1_SIZE			0x04000000
+
+/* Aggregate of all devices in the first GB */
+#define DEVICE0_BASE			0x20000000
+#define DEVICE0_SIZE			0x0c200000
+
+#define NSRAM_BASE			0x2e000000
+#define NSRAM_SIZE			0x10000
+
+#define PCIE_EXP_BASE			0x40000000
+#define TZRNG_BASE			0x7fe60000
+
+#define ARCH_MODEL_VE			0x5
+
+/* FVP Power controller base address*/
+#define PWRC_BASE			UL(0x1c100000)
+
+/* FVP SP804 timer frequency is 35 MHz*/
+#define SP804_TIMER_CLKMULT		1
+#define SP804_TIMER_CLKDIV		35
+
+/* SP810 controller. FVP specific flags */
+#define FVP_SP810_CTRL_TIM0_OV		(1 << 16)
+#define FVP_SP810_CTRL_TIM1_OV		(1 << 18)
+#define FVP_SP810_CTRL_TIM2_OV		(1 << 20)
+#define FVP_SP810_CTRL_TIM3_OV		(1 << 22)
+
+/*******************************************************************************
+ * GIC-400 & interrupt handling related constants
+ ******************************************************************************/
+/* VE compatible GIC memory map */
+#define VE_GICD_BASE			0x2c001000
+#define VE_GICC_BASE			0x2c002000
+#define VE_GICH_BASE			0x2c004000
+#define VE_GICV_BASE			0x2c006000
+
+#define FVP_VE_IRQ_TZ_WDOG			56
+#define FVP_VE_IRQ_SEC_SYS_TIMER		57
+
+#define V2M_FLASH1_BASE			UL(0x0C000000)
+#define V2M_FLASH1_SIZE			UL(0x04000000)
+
+#define V2M_MAP_FLASH1_RW		MAP_REGION_FLAT(V2M_FLASH1_BASE,\
+						V2M_FLASH1_SIZE,	\
+						MT_DEVICE | MT_RW | MT_SECURE)
+
+#define V2M_MAP_FLASH1_RO		MAP_REGION_FLAT(V2M_FLASH1_BASE,\
+						V2M_FLASH1_SIZE,	\
+						MT_RO_DATA | MT_SECURE)
+
+#endif /* FVP_VE_DEF_H */
diff --git a/plat/arm/board/fvp_ve/fvp_ve_pm.c b/plat/arm/board/fvp_ve/fvp_ve_pm.c
new file mode 100644
index 0000000..a4d627b
--- /dev/null
+++ b/plat/arm/board/fvp_ve/fvp_ve_pm.c
@@ -0,0 +1,25 @@
+/*
+* Copyright (c) 2019, Arm Limited. All rights reserved.
+*
+* SPDX-License-Identifier: BSD-3-Clause
+*/
+
+#include <lib/psci/psci.h>
+#include <plat/arm/common/plat_arm.h>
+
+/*******************************************************************************
+ * Export the platform handlers via fvp_ve_psci_pm_ops. The ARM Standard
+ * platform layer will take care of registering the handlers with PSCI.
+ ******************************************************************************/
+plat_psci_ops_t fvp_ve_psci_pm_ops = {
+	/* dummy struct */
+	.validate_ns_entrypoint = NULL,
+};
+
+int __init plat_setup_psci_ops(uintptr_t sec_entrypoint,
+				const plat_psci_ops_t **psci_ops)
+{
+	*psci_ops = &fvp_ve_psci_pm_ops;
+
+	return 0;
+}
diff --git a/plat/arm/board/fvp_ve/fvp_ve_private.h b/plat/arm/board/fvp_ve/fvp_ve_private.h
new file mode 100644
index 0000000..5d396bc
--- /dev/null
+++ b/plat/arm/board/fvp_ve/fvp_ve_private.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2019, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef FVP_VE_PRIVATE_H
+#define FVP_VE_PRIVATE_H
+
+#include <plat/arm/common/plat_arm.h>
+
+/*******************************************************************************
+ * Function and variable prototypes
+ ******************************************************************************/
+
+void fvp_ve_config_setup(void);
+
+#endif /* FVP_VE_PRIVATE_H */
diff --git a/plat/arm/board/fvp_ve/fvp_ve_security.c b/plat/arm/board/fvp_ve/fvp_ve_security.c
new file mode 100644
index 0000000..24465cb
--- /dev/null
+++ b/plat/arm/board/fvp_ve/fvp_ve_security.c
@@ -0,0 +1,22 @@
+/*
+ * Copyright (c) 2019, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * We assume that all security programming is done by the primary core.
+ */
+void plat_arm_security_setup(void)
+{
+	/*
+	 * The Base FVP has a TrustZone address space controller, the Foundation
+	 * FVP does not. Trying to program the device on the foundation FVP will
+	 * cause an abort.
+	 *
+	 * If the platform had additional peripheral specific security
+	 * configurations, those would be configured here.
+	 */
+
+	return;
+}
diff --git a/plat/arm/board/fvp_ve/fvp_ve_topology.c b/plat/arm/board/fvp_ve/fvp_ve_topology.c
new file mode 100644
index 0000000..51cc9da
--- /dev/null
+++ b/plat/arm/board/fvp_ve/fvp_ve_topology.c
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2019, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <platform_def.h>
+
+#include <drivers/arm/fvp/fvp_pwrc.h>
+#include <plat/arm/common/arm_config.h>
+#include <plat/arm/common/plat_arm.h>
+#include <plat/common/platform.h>
+
+/* The FVP VE power domain tree descriptor */
+static const unsigned char fvp_ve_power_domain_tree_desc[] = {
+	1,
+	/* No of children for the root node */
+	FVP_VE_CLUSTER_COUNT,
+	/* No of children for the first cluster node */
+	FVP_VE_CORE_COUNT,
+};
+
+/*******************************************************************************
+ * This function returns the topology according to FVP_VE_CLUSTER_COUNT.
+ ******************************************************************************/
+const unsigned char *plat_get_power_domain_tree_desc(void)
+{
+	return fvp_ve_power_domain_tree_desc;
+}
+
+/*******************************************************************************
+ * Currently FVP VE has only been tested with one core, therefore 0 is returned.
+ ******************************************************************************/
+int plat_core_pos_by_mpidr(u_register_t mpidr)
+{
+	return 0;
+}
diff --git a/plat/arm/board/fvp_ve/include/platform_def.h b/plat/arm/board/fvp_ve/include/platform_def.h
new file mode 100644
index 0000000..1870442
--- /dev/null
+++ b/plat/arm/board/fvp_ve/include/platform_def.h
@@ -0,0 +1,330 @@
+/*
+ * Copyright (c) 2019, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLATFORM_DEF_H
+#define PLATFORM_DEF_H
+
+#include <common/tbbr/tbbr_img_def.h>
+#include <lib/utils_def.h>
+#include <lib/xlat_tables/xlat_tables_defs.h>
+#include <plat/arm/board/common/v2m_def.h>
+#include <plat/common/common_def.h>
+
+#include "../fvp_ve_def.h"
+
+#define ARM_CACHE_WRITEBACK_SHIFT	6
+
+/* Memory location options for TSP */
+#define ARM_DRAM_ID			2
+
+#define ARM_DRAM1_BASE			UL(0x80000000)
+#define ARM_DRAM1_SIZE			UL(0x80000000)
+#define ARM_DRAM1_END			(ARM_DRAM1_BASE +		\
+					 ARM_DRAM1_SIZE - 1)
+
+#define ARM_DRAM2_BASE			UL(0x880000000)
+#define ARM_DRAM2_SIZE			PLAT_ARM_DRAM2_SIZE
+#define ARM_DRAM2_END			(ARM_DRAM2_BASE +		\
+					 ARM_DRAM2_SIZE - 1)
+
+#define ARM_NS_DRAM1_BASE		ARM_DRAM1_BASE
+/*
+ * The last 2MB is meant to be NOLOAD and will not be zero
+ * initialized.
+ */
+#define ARM_NS_DRAM1_SIZE		(ARM_DRAM1_SIZE -		\
+					 0x00200000)
+
+
+/* The first 4KB of NS DRAM1 are used as shared memory */
+#define FVP_VE_SHARED_RAM_BASE		ARM_NS_DRAM1_BASE
+#define FVP_VE_SHARED_RAM_SIZE		UL(0x00001000)	/* 4 KB */
+
+/* The next 252 kB of NS DRAM is used to load the BL images */
+#define ARM_BL_RAM_BASE			(FVP_VE_SHARED_RAM_BASE +	\
+					 FVP_VE_SHARED_RAM_SIZE)
+#define ARM_BL_RAM_SIZE			(PLAT_ARM_BL_PLUS_SHARED_RAM_SIZE -	\
+					 FVP_VE_SHARED_RAM_SIZE)
+
+
+#define ARM_IRQ_SEC_PHY_TIMER		29
+
+#define ARM_IRQ_SEC_SGI_0		8
+#define ARM_IRQ_SEC_SGI_1		9
+#define ARM_IRQ_SEC_SGI_2		10
+#define ARM_IRQ_SEC_SGI_3		11
+#define ARM_IRQ_SEC_SGI_4		12
+#define ARM_IRQ_SEC_SGI_5		13
+#define ARM_IRQ_SEC_SGI_6		14
+#define ARM_IRQ_SEC_SGI_7		15
+
+/*
+ * Define a list of Group 1 Secure and Group 0 interrupt properties as per GICv3
+ * terminology. On a GICv2 system or mode, the lists will be merged and treated
+ * as Group 0 interrupts.
+ */
+#define ARM_G1S_IRQ_PROPS(grp) \
+	INTR_PROP_DESC(ARM_IRQ_SEC_PHY_TIMER, GIC_HIGHEST_SEC_PRIORITY, (grp), \
+			GIC_INTR_CFG_LEVEL), \
+	INTR_PROP_DESC(ARM_IRQ_SEC_SGI_1, GIC_HIGHEST_SEC_PRIORITY, (grp), \
+			GIC_INTR_CFG_EDGE), \
+	INTR_PROP_DESC(ARM_IRQ_SEC_SGI_2, GIC_HIGHEST_SEC_PRIORITY, (grp), \
+			GIC_INTR_CFG_EDGE), \
+	INTR_PROP_DESC(ARM_IRQ_SEC_SGI_3, GIC_HIGHEST_SEC_PRIORITY, (grp), \
+			GIC_INTR_CFG_EDGE), \
+	INTR_PROP_DESC(ARM_IRQ_SEC_SGI_4, GIC_HIGHEST_SEC_PRIORITY, (grp), \
+			GIC_INTR_CFG_EDGE), \
+	INTR_PROP_DESC(ARM_IRQ_SEC_SGI_5, GIC_HIGHEST_SEC_PRIORITY, (grp), \
+			GIC_INTR_CFG_EDGE), \
+	INTR_PROP_DESC(ARM_IRQ_SEC_SGI_7, GIC_HIGHEST_SEC_PRIORITY, (grp), \
+			GIC_INTR_CFG_EDGE)
+
+#define ARM_G0_IRQ_PROPS(grp) \
+	INTR_PROP_DESC(ARM_IRQ_SEC_SGI_6, GIC_HIGHEST_SEC_PRIORITY, (grp), \
+			GIC_INTR_CFG_EDGE)
+
+#define ARM_MAP_SHARED_RAM		MAP_REGION_FLAT(		\
+						FVP_VE_SHARED_RAM_BASE,	\
+						FVP_VE_SHARED_RAM_SIZE,	\
+						MT_DEVICE | MT_RW | MT_SECURE)
+
+#define ARM_MAP_NS_DRAM1		MAP_REGION_FLAT(		\
+						ARM_NS_DRAM1_BASE,	\
+						ARM_NS_DRAM1_SIZE,	\
+						MT_MEMORY | MT_RW | MT_NS)
+
+#define ARM_MAP_DRAM2			MAP_REGION_FLAT(		\
+						ARM_DRAM2_BASE,		\
+						ARM_DRAM2_SIZE,		\
+						MT_MEMORY | MT_RW | MT_NS)
+
+#define ARM_MAP_BL_RO			MAP_REGION_FLAT(			\
+						BL_CODE_BASE,			\
+						BL_CODE_END - BL_CODE_BASE,	\
+						MT_CODE | MT_SECURE),		\
+					MAP_REGION_FLAT(			\
+						BL_RO_DATA_BASE,		\
+						BL_RO_DATA_END			\
+							- BL_RO_DATA_BASE,	\
+						MT_RO_DATA | MT_SECURE)
+
+#if USE_COHERENT_MEM
+#define ARM_MAP_BL_COHERENT_RAM		MAP_REGION_FLAT(			\
+						BL_COHERENT_RAM_BASE,		\
+						BL_COHERENT_RAM_END		\
+							- BL_COHERENT_RAM_BASE, \
+						MT_DEVICE | MT_RW | MT_SECURE)
+#endif
+
+/*
+ * The max number of regions like RO(code), coherent and data required by
+ * different BL stages which need to be mapped in the MMU.
+ */
+#define ARM_BL_REGIONS			5
+
+#define MAX_MMAP_REGIONS		(PLAT_ARM_MMAP_ENTRIES +	\
+					 ARM_BL_REGIONS)
+
+/* Memory mapped Generic timer interfaces  */
+#define FVP_VE_TIMER_BASE_FREQUENCY		UL(24000000)
+#define ARM_SYS_CNTREAD_BASE	UL(0x2a800000)
+#define ARM_SYS_CNT_BASE_S		UL(0x2a820000)
+#define ARM_SYS_CNT_BASE_NS		UL(0x2a830000)
+
+#define ARM_CONSOLE_BAUDRATE		115200
+
+/* Trusted Watchdog constants */
+#define ARM_SP805_TWDG_BASE		UL(0x1C0F0000)
+#define ARM_SP805_TWDG_CLK_HZ		32768
+/* The TBBR document specifies a watchdog timeout of 256 seconds. SP805
+ * asserts reset after two consecutive countdowns (2 x 128 = 256 sec) */
+#define ARM_TWDG_TIMEOUT_SEC		128
+#define ARM_TWDG_LOAD_VAL		(ARM_SP805_TWDG_CLK_HZ * 	\
+					 ARM_TWDG_TIMEOUT_SEC)
+
+#define PLAT_PHY_ADDR_SPACE_SIZE			(1ULL << 32)
+#define PLAT_VIRT_ADDR_SPACE_SIZE			(1ULL << 32)
+
+/*
+ * This macro defines the deepest retention state possible. A higher state
+ * id will represent an invalid or a power down state.
+ */
+#define PLAT_MAX_RET_STATE		1
+
+/*
+ * This macro defines the deepest power down states possible. Any state ID
+ * higher than this is invalid.
+ */
+#define PLAT_MAX_OFF_STATE		2
+
+/*
+ * Some data must be aligned on the biggest cache line size in the platform.
+ * This is known only to the platform as it might have a combination of
+ * integrated and external caches.
+ */
+#define CACHE_WRITEBACK_GRANULE		(U(1) << ARM_CACHE_WRITEBACK_SHIFT)
+
+/*
+ * To enable TB_FW_CONFIG to be loaded by BL1, define the corresponding base
+ * and limit. Leave enough space of BL2 meminfo.
+ */
+#define ARM_TB_FW_CONFIG_BASE		(ARM_BL_RAM_BASE + sizeof(meminfo_t))
+#define ARM_TB_FW_CONFIG_LIMIT		(ARM_BL_RAM_BASE + PAGE_SIZE)
+
+/*******************************************************************************
+ * BL1 specific defines.
+ * BL1 RW data is relocated from ROM to RAM at runtime so we need 2 sets of
+ * addresses.
+ ******************************************************************************/
+#define BL1_RO_BASE			0x00000000
+#define BL1_RO_LIMIT			PLAT_ARM_TRUSTED_ROM_SIZE
+/*
+ * Put BL1 RW at the top of the memory allocated for BL images in NS DRAM.
+ */
+#define BL1_RW_BASE			(ARM_BL_RAM_BASE +		\
+						ARM_BL_RAM_SIZE -	\
+						(PLAT_ARM_MAX_BL1_RW_SIZE))
+#define BL1_RW_LIMIT			(ARM_BL_RAM_BASE + 		\
+					    (ARM_BL_RAM_SIZE))
+
+
+/*******************************************************************************
+ * BL2 specific defines.
+ ******************************************************************************/
+
+/*
+ * Put BL2 just below BL1.
+ */
+#define BL2_BASE			(BL1_RW_BASE - FVP_VE_MAX_BL2_SIZE)
+#define BL2_LIMIT			BL1_RW_BASE
+
+
+/* Put BL32 below BL2 in NS DRAM.*/
+#define ARM_BL2_MEM_DESC_BASE		ARM_TB_FW_CONFIG_LIMIT
+
+#define BL32_BASE			((ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE)\
+						- PLAT_ARM_MAX_BL32_SIZE)
+#define BL32_PROGBITS_LIMIT		BL2_BASE
+#define BL32_LIMIT			(ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE)
+
+/* Required platform porting definitions */
+#define PLATFORM_CORE_COUNT		1
+#define PLAT_NUM_PWR_DOMAINS		((FVP_VE_CLUSTER_COUNT + \
+					PLATFORM_CORE_COUNT) + 1)
+
+#define PLAT_MAX_PWR_LVL		2
+
+/*
+ * Other platform porting definitions are provided by included headers
+ */
+
+/*
+ * Required ARM standard platform porting definitions
+ */
+
+#define PLAT_ARM_BL_PLUS_SHARED_RAM_SIZE	0x00040000	/* 256 KB */
+
+#define PLAT_ARM_TRUSTED_ROM_BASE	0x00000000
+#define PLAT_ARM_TRUSTED_ROM_SIZE	0x04000000	/* 64 MB */
+
+#define PLAT_ARM_DRAM2_SIZE		ULL(0x80000000)
+
+/*
+ * Load address of BL33 for this platform port
+ */
+#define PLAT_ARM_NS_IMAGE_BASE	(ARM_DRAM1_BASE + U(0x8000000))
+
+/*
+ * PLAT_ARM_MMAP_ENTRIES depends on the number of entries in the
+ * plat_arm_mmap array defined for each BL stage.
+ */
+#if defined(IMAGE_BL32)
+# define PLAT_ARM_MMAP_ENTRIES		8
+# define MAX_XLAT_TABLES		6
+#else
+# define PLAT_ARM_MMAP_ENTRIES		12
+# define MAX_XLAT_TABLES		6
+#endif
+
+/*
+ * PLAT_ARM_MAX_BL1_RW_SIZE is calculated using the current BL1 RW debug size
+ * plus a little space for growth.
+ */
+#define PLAT_ARM_MAX_BL1_RW_SIZE	0xB000
+
+/*
+ * FVP_VE_MAX_BL2_SIZE is calculated using the current BL2 debug size plus a
+ * little space for growth.
+ */
+#define FVP_VE_MAX_BL2_SIZE		0x11000
+
+/*
+ * Since BL32 NOBITS overlays BL2 and BL1-RW, PLAT_ARM_MAX_BL32_SIZE is
+ * calculated using the current SP_MIN PROGBITS debug size plus the sizes of
+ * BL2 and BL1-RW
+ */
+#define PLAT_ARM_MAX_BL32_SIZE		0x3B000
+/*
+
+ * Size of cacheable stacks
+ */
+#if defined(IMAGE_BL1)
+#  define PLATFORM_STACK_SIZE 0x440
+#elif defined(IMAGE_BL2)
+#  define PLATFORM_STACK_SIZE 0x400
+#elif defined(IMAGE_BL32)
+# define PLATFORM_STACK_SIZE 0x440
+#endif
+
+#define MAX_IO_DEVICES			3
+#define MAX_IO_HANDLES			4
+
+/* Reserve the last block of flash for PSCI MEM PROTECT flag */
+#define PLAT_ARM_FIP_BASE		V2M_FLASH1_BASE
+#define PLAT_ARM_FIP_MAX_SIZE		(V2M_FLASH1_SIZE - V2M_FLASH_BLOCK_SIZE)
+
+#define PLAT_ARM_NVM_BASE		V2M_FLASH1_BASE
+#define PLAT_ARM_NVM_SIZE		(V2M_FLASH1_SIZE - V2M_FLASH_BLOCK_SIZE)
+
+/*
+ * PL011 related constants
+ */
+#define PLAT_ARM_BOOT_UART_BASE		V2M_IOFPGA_UART0_BASE
+#define PLAT_ARM_BOOT_UART_CLK_IN_HZ	V2M_IOFPGA_UART0_CLK_IN_HZ
+
+#define PLAT_ARM_RUN_UART_BASE		V2M_IOFPGA_UART1_BASE
+#define PLAT_ARM_RUN_UART_CLK_IN_HZ	V2M_IOFPGA_UART1_CLK_IN_HZ
+
+#define PLAT_ARM_CRASH_UART_BASE	PLAT_ARM_RUN_UART_BASE
+#define PLAT_ARM_CRASH_UART_CLK_IN_HZ	PLAT_ARM_RUN_UART_CLK_IN_HZ
+
+/* System timer related constants */
+#define PLAT_ARM_NSTIMER_FRAME_ID		1
+
+/* Mailbox base address */
+#define FVP_VE_TRUSTED_MAILBOX_BASE	FVP_VE_SHARED_RAM_BASE
+
+/*
+ * GIC related constants to cater for GICv2
+ */
+#define PLAT_ARM_GICD_BASE		VE_GICD_BASE
+#define PLAT_ARM_GICC_BASE		VE_GICC_BASE
+
+/*
+ * Define a list of Group 1 Secure and Group 0 interrupts as per GICv3
+ * terminology. On a GICv2 system or mode, the lists will be merged and treated
+ * as Group 0 interrupts.
+ */
+#define PLAT_ARM_G1S_IRQ_PROPS(grp) \
+	ARM_G1S_IRQ_PROPS(grp), \
+	INTR_PROP_DESC(FVP_VE_IRQ_TZ_WDOG, GIC_HIGHEST_SEC_PRIORITY, (grp), \
+			GIC_INTR_CFG_LEVEL), \
+	INTR_PROP_DESC(FVP_VE_IRQ_SEC_SYS_TIMER, GIC_HIGHEST_SEC_PRIORITY, (grp), \
+			GIC_INTR_CFG_LEVEL)
+
+#define PLAT_ARM_G0_IRQ_PROPS(grp)	ARM_G0_IRQ_PROPS(grp)
+
+#endif /* PLATFORM_H */
diff --git a/plat/arm/board/fvp_ve/platform.mk b/plat/arm/board/fvp_ve/platform.mk
new file mode 100644
index 0000000..f9ced2c
--- /dev/null
+++ b/plat/arm/board/fvp_ve/platform.mk
@@ -0,0 +1,125 @@
+#
+# Copyright (c) 2019, Arm Limited. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+ifdef ARM_CORTEX_A5
+# Use the SP804 timer instead of the generic one
+FVP_VE_USE_SP804_TIMER	:= 1
+$(eval $(call add_define,FVP_VE_USE_SP804_TIMER))
+BL2_SOURCES		+=	drivers/arm/sp804/sp804_delay_timer.c
+endif
+
+FVP_VE_GIC_SOURCES		:=	drivers/arm/gic/common/gic_common.c	\
+				drivers/arm/gic/v2/gicv2_main.c		\
+				drivers/arm/gic/v2/gicv2_helpers.c	\
+				plat/common/plat_gicv2.c		\
+				plat/arm/common/arm_gicv2.c
+
+FVP_VE_SECURITY_SOURCES	:=	plat/arm/board/fvp_ve/fvp_ve_security.c
+
+PLAT_INCLUDES		:=	-Iplat/arm/board/fvp_ve/include
+
+PLAT_BL_COMMON_SOURCES	:=	plat/arm/board/fvp_ve/fvp_ve_common.c		\
+				plat/arm/common/${ARCH}/arm_helpers.S		\
+				plat/arm/common/arm_common.c			\
+				plat/arm/common/arm_console.c			\
+				drivers/arm/pl011/${ARCH}/pl011_console.S	\
+				plat/arm/board/common/${ARCH}/board_arm_helpers.S
+
+ifdef ARM_CORTEX_A5
+FVP_VE_CPU_LIBS		:=	lib/cpus/aarch32/cortex_a5.S
+else
+FVP_VE_CPU_LIBS		:=	lib/cpus/aarch32/cortex_a7.S
+endif
+
+BL1_SOURCES		+=	drivers/arm/sp805/sp805.c			\
+				drivers/io/io_fip.c				\
+				drivers/io/io_memmap.c				\
+				drivers/io/io_storage.c				\
+				plat/arm/common/arm_bl1_setup.c			\
+				plat/arm/common/arm_err.c			\
+				plat/arm/common/arm_io_storage.c		\
+				drivers/cfi/v2m/v2m_flash.c			\
+				plat/arm/board/fvp_ve/${ARCH}/fvp_ve_helpers.S	\
+				plat/arm/board/fvp_ve/fvp_ve_bl1_setup.c	\
+				lib/aarch32/arm32_aeabi_divmod.c		\
+				lib/aarch32/arm32_aeabi_divmod_a32.S		\
+				${FVP_VE_CPU_LIBS}					\
+				${DYN_CFG_SOURCES}
+
+BL2_SOURCES		+=	plat/arm/board/fvp_ve/fvp_ve_bl2_setup.c		\
+				lib/aarch32/arm32_aeabi_divmod.c		\
+				lib/aarch32/arm32_aeabi_divmod_a32.S		\
+				drivers/delay_timer/delay_timer.c		\
+				drivers/delay_timer/generic_delay_timer.c	\
+				drivers/cfi/v2m/v2m_flash.c			\
+				drivers/io/io_fip.c				\
+				drivers/io/io_memmap.c				\
+				drivers/io/io_storage.c				\
+				plat/arm/common/arm_bl2_setup.c			\
+				plat/arm/common/arm_err.c			\
+				plat/arm/common/arm_io_storage.c		\
+				plat/arm/common/${ARCH}/arm_bl2_mem_params_desc.c	\
+				plat/arm/common/arm_image_load.c		\
+				common/desc_image_load.c			\
+				${DYN_CFG_SOURCES}				\
+				${FVP_VE_SECURITY_SOURCES}
+
+# Add the FDT_SOURCES and options for Dynamic Config (only for Unix env)
+ifdef UNIX_MK
+
+FDT_SOURCES		+=	plat/arm/board/fvp_ve/fdts/fvp_ve_tb_fw_config.dts
+
+FVP_TB_FW_CONFIG	:=	${BUILD_PLAT}/fdts/fvp_ve_tb_fw_config.dtb
+
+# Add the TB_FW_CONFIG to FIP and specify the same to certtool
+$(eval $(call TOOL_ADD_PAYLOAD,${FVP_TB_FW_CONFIG},--tb-fw-config))
+
+FDT_SOURCES		+=	${FVP_HW_CONFIG_DTS}
+$(eval FVP_HW_CONFIG	:=	${BUILD_PLAT}/$(patsubst %.dts,%.dtb, \
+	fdts/$(notdir ${FVP_HW_CONFIG_DTS})))
+# Add the HW_CONFIG to FIP and specify the same to certtool
+$(eval $(call TOOL_ADD_PAYLOAD,${FVP_HW_CONFIG},--hw-config))
+endif
+
+NEED_BL32 := yes
+
+# Modification of arm_common.mk
+
+# Process ARM_DISABLE_TRUSTED_WDOG flag
+# By default, Trusted Watchdog is always enabled unless SPIN_ON_BL1_EXIT is set
+ARM_DISABLE_TRUSTED_WDOG	:=	0
+ifeq (${SPIN_ON_BL1_EXIT}, 1)
+ARM_DISABLE_TRUSTED_WDOG	:=	1
+endif
+$(eval $(call assert_boolean,ARM_DISABLE_TRUSTED_WDOG))
+$(eval $(call add_define,ARM_DISABLE_TRUSTED_WDOG))
+
+# Use translation tables library v1 if using Cortex-A5
+ifdef ARM_CORTEX_A5
+ARM_XLAT_TABLES_LIB_V1		:=	1
+else
+ARM_XLAT_TABLES_LIB_V1		:=	0
+endif
+$(eval $(call assert_boolean,ARM_XLAT_TABLES_LIB_V1))
+$(eval $(call add_define,ARM_XLAT_TABLES_LIB_V1))
+
+MULTI_CONSOLE_API		:=	1
+
+ifeq (${ARM_XLAT_TABLES_LIB_V1}, 1)
+	# Only use nonlpae version of xlatv1 otherwise use xlat v2
+	PLAT_BL_COMMON_SOURCES	+=	lib/xlat_tables/${ARCH}/nonlpae_tables.c
+else
+	include lib/xlat_tables_v2/xlat_tables.mk
+	PLAT_BL_COMMON_SOURCES	+=	${XLAT_TABLES_LIB_SRCS}
+endif
+
+# Add `libfdt` and Arm common helpers required for Dynamic Config
+include lib/libfdt/libfdt.mk
+
+DYN_CFG_SOURCES		+=	plat/arm/common/arm_dyn_cfg.c		\
+				plat/arm/common/arm_dyn_cfg_helpers.c	\
+				common/fdt_wrappers.c
+
diff --git a/plat/arm/board/fvp_ve/sp_min/fvp_ve_sp_min_setup.c b/plat/arm/board/fvp_ve/sp_min/fvp_ve_sp_min_setup.c
new file mode 100644
index 0000000..e6a1bbe
--- /dev/null
+++ b/plat/arm/board/fvp_ve/sp_min/fvp_ve_sp_min_setup.c
@@ -0,0 +1,15 @@
+/*
+ * Copyright (c) 2019, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <plat/arm/common/plat_arm.h>
+
+void plat_arm_sp_min_early_platform_setup(u_register_t arg0, u_register_t arg1,
+			u_register_t arg2, u_register_t arg3)
+{
+	arm_sp_min_early_platform_setup((void *)arg0, arg1, arg2, (void *)arg3);
+}
diff --git a/plat/arm/board/fvp_ve/sp_min/sp_min-fvp_ve.mk b/plat/arm/board/fvp_ve/sp_min/sp_min-fvp_ve.mk
new file mode 100644
index 0000000..4ca810d
--- /dev/null
+++ b/plat/arm/board/fvp_ve/sp_min/sp_min-fvp_ve.mk
@@ -0,0 +1,22 @@
+#
+# Copyright (c) 2019, Arm Limited. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# SP_MIN source files specific to FVP platform
+BL32_SOURCES		+=	drivers/cfi/v2m/v2m_flash.c			\
+				lib/utils/mem_region.c				\
+				plat/arm/board/fvp_ve/aarch32/fvp_ve_helpers.S	\
+				drivers/arm/fvp/fvp_pwrc.c			\
+				plat/arm/board/fvp_ve/fvp_ve_pm.c		\
+				plat/arm/board/fvp_ve/fvp_ve_topology.c		\
+				plat/arm/board/fvp_ve/sp_min/fvp_ve_sp_min_setup.c	\
+				lib/aarch32/arm32_aeabi_divmod.c		\
+				lib/aarch32/arm32_aeabi_divmod_a32.S		\
+				plat/arm/common/sp_min/arm_sp_min_setup.c	\
+				plat/common/aarch32/platform_mp_stack.S		\
+				plat/common/plat_psci_common.c			\
+				${FVP_VE_CPU_LIBS}				\
+				${FVP_VE_GIC_SOURCES}				\
+				${FVP_VE_SECURITY_SOURCES}
diff --git a/plat/arm/common/arm_bl1_setup.c b/plat/arm/common/arm_bl1_setup.c
index fd4809c..59a255e 100644
--- a/plat/arm/common/arm_bl1_setup.c
+++ b/plat/arm/common/arm_bl1_setup.c
@@ -155,7 +155,9 @@
 	 * Allow access to the System counter timer module and program
 	 * counter frequency for non secure images during FWU
 	 */
+#ifdef ARM_SYS_TIMCTL_BASE
 	arm_configure_sys_timer();
+#endif
 	write_cntfrq_el0(plat_get_syscnt_freq2());
 }
 
diff --git a/plat/arm/common/arm_dyn_cfg.c b/plat/arm/common/arm_dyn_cfg.c
index 1c58649..9a53649 100644
--- a/plat/arm/common/arm_dyn_cfg.c
+++ b/plat/arm/common/arm_dyn_cfg.c
@@ -243,10 +243,11 @@
 			if (check_uptr_overflow(image_base, image_size))
 				continue;
 
+#ifdef	BL31_BASE
 			/* Ensure the configs don't overlap with BL31 */
 			if ((image_base > BL31_BASE) || ((image_base + image_size) > BL31_BASE))
 				continue;
-
+#endif
 			/* Ensure the configs are loaded in a valid address */
 			if (image_base < ARM_BL_RAM_BASE)
 				continue;
diff --git a/plat/arm/common/sp_min/arm_sp_min_setup.c b/plat/arm/common/sp_min/arm_sp_min_setup.c
index c0ea027..bb69914 100644
--- a/plat/arm/common/sp_min/arm_sp_min_setup.c
+++ b/plat/arm/common/sp_min/arm_sp_min_setup.c
@@ -193,12 +193,14 @@
 #endif
 
 	/* Enable and initialize the System level generic timer */
+#ifdef ARM_SYS_CNTCTL_BASE
 	mmio_write_32(ARM_SYS_CNTCTL_BASE + CNTCR_OFF,
 			CNTCR_FCREQ(0U) | CNTCR_EN);
-
+#endif
+#ifdef ARM_SYS_TIMCTL_BASE
 	/* Allow access to the System counter timer module */
 	arm_configure_sys_timer();
-
+#endif
 	/* Initialize power controller before setting up topology */
 	plat_arm_pwrc_setup();
 }