poplar: Migrate to new interfaces
- Remove support for LOAD_IMAGE_V2=0.
- Replace deprecated bl1_init_bl2_mem_layout().
- Migrate to bl2_early_platform_setup2().
- Migrate to bl31_early_platform_setup2().
- Use PLAT_VIRT_ADDR_SPACE_SIZE and PLAT_PHY_ADDR_SPACE_SIZE.
- Remove references to removed build options.
- Update Makefile paths.
Change-Id: I52e02633365b3db4244f7ff0f99a6446eae619f0
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
diff --git a/plat/hisilicon/poplar/bl2_plat_setup.c b/plat/hisilicon/poplar/bl2_plat_setup.c
index 94d59ff..a253d3f 100644
--- a/plat/hisilicon/poplar/bl2_plat_setup.c
+++ b/plat/hisilicon/poplar/bl2_plat_setup.c
@@ -32,49 +32,11 @@
static meminfo_t bl2_tzram_layout __aligned(CACHE_WRITEBACK_GRANULE);
-#if !LOAD_IMAGE_V2
-
-/*******************************************************************************
- * This structure represents the superset of information that is passed to
- * BL31, e.g. while passing control to it from BL2, bl31_params
- * and other platform specific params
- ******************************************************************************/
-typedef struct bl2_to_bl31_params_mem {
- bl31_params_t bl31_params;
- image_info_t bl31_image_info;
- image_info_t bl32_image_info;
- image_info_t bl33_image_info;
- entry_point_info_t bl33_ep_info;
- entry_point_info_t bl32_ep_info;
- entry_point_info_t bl31_ep_info;
-} bl2_to_bl31_params_mem_t;
-
-static bl2_to_bl31_params_mem_t bl31_params_mem;
-
-meminfo_t *bl2_plat_sec_mem_layout(void)
-{
- return &bl2_tzram_layout;
-}
-
-#ifdef SCP_BL2_BASE
-void bl2_plat_get_scp_bl2_meminfo(meminfo_t *scp_bl2_meminfo)
-{
- /*
- * This platform has no SCP_BL2 yet
- */
-}
-#endif
-#endif /* LOAD_IMAGE_V2 */
-
/*******************************************************************************
* Transfer SCP_BL2 from Trusted RAM using the SCP Download protocol.
* Return 0 on success, -1 otherwise.
******************************************************************************/
-#if LOAD_IMAGE_V2
int plat_poplar_bl2_handle_scp_bl2(image_info_t *scp_bl2_image_info)
-#else
-int bl2_plat_handle_scp_bl2(struct image_info *scp_bl2_image_info)
-#endif
{
/*
* This platform has no SCP_BL2 yet
@@ -138,7 +100,6 @@
}
#endif /* AARCH32 */
-#if LOAD_IMAGE_V2
int poplar_bl2_handle_post_image_load(unsigned int image_id)
{
int err = 0;
@@ -210,129 +171,10 @@
return poplar_bl2_handle_post_image_load(image_id);
}
-#else /* LOAD_IMAGE_V2 */
-
-bl31_params_t *bl2_plat_get_bl31_params(void)
-{
- bl31_params_t *bl2_to_bl31_params = NULL;
-
- /*
- * Initialise the memory for all the arguments that needs to
- * be passed to BL3-1
- */
- memset(&bl31_params_mem, 0, sizeof(bl2_to_bl31_params_mem_t));
-
- /* Assign memory for TF related information */
- bl2_to_bl31_params = &bl31_params_mem.bl31_params;
- SET_PARAM_HEAD(bl2_to_bl31_params, PARAM_BL31, VERSION_1, 0);
-
- /* Fill BL3-1 related information */
- bl2_to_bl31_params->bl31_image_info = &bl31_params_mem.bl31_image_info;
- SET_PARAM_HEAD(bl2_to_bl31_params->bl31_image_info,
- PARAM_IMAGE_BINARY, VERSION_1, 0);
-
- /* Fill BL3-2 related information if it exists */
-#ifdef BL32_BASE
- bl2_to_bl31_params->bl32_ep_info = &bl31_params_mem.bl32_ep_info;
- SET_PARAM_HEAD(bl2_to_bl31_params->bl32_ep_info, PARAM_EP,
- VERSION_1, 0);
- bl2_to_bl31_params->bl32_image_info = &bl31_params_mem.bl32_image_info;
- SET_PARAM_HEAD(bl2_to_bl31_params->bl32_image_info, PARAM_IMAGE_BINARY,
- VERSION_1, 0);
-#endif
-
- /* Fill BL3-3 related information */
- bl2_to_bl31_params->bl33_ep_info = &bl31_params_mem.bl33_ep_info;
- SET_PARAM_HEAD(bl2_to_bl31_params->bl33_ep_info,
- PARAM_EP, VERSION_1, 0);
-
- /* BL3-3 expects to receive the primary CPU MPID (through x0) */
- bl2_to_bl31_params->bl33_ep_info->args.arg0 = 0xffff & read_mpidr();
-
- bl2_to_bl31_params->bl33_image_info = &bl31_params_mem.bl33_image_info;
- SET_PARAM_HEAD(bl2_to_bl31_params->bl33_image_info,
- PARAM_IMAGE_BINARY, VERSION_1, 0);
-
- return bl2_to_bl31_params;
-}
-
-struct entry_point_info *bl2_plat_get_bl31_ep_info(void)
-{
-#if DEBUG
- bl31_params_mem.bl31_ep_info.args.arg1 = POPLAR_BL31_PLAT_PARAM_VAL;
-#endif
-
- return &bl31_params_mem.bl31_ep_info;
-}
-
-void bl2_plat_set_bl31_ep_info(image_info_t *image,
- entry_point_info_t *bl31_ep_info)
-{
- SET_SECURITY_STATE(bl31_ep_info->h.attr, SECURE);
- bl31_ep_info->spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
- DISABLE_ALL_EXCEPTIONS);
-}
-
-/*******************************************************************************
- * Before calling this function BL32 is loaded in memory and its entrypoint
- * is set by load_image. This is a placeholder for the platform to change
- * the entrypoint of BL32 and set SPSR and security state.
- * On Poplar we only set the security state of the entrypoint
- ******************************************************************************/
-#ifdef BL32_BASE
-void bl2_plat_set_bl32_ep_info(image_info_t *bl32_image_info,
- entry_point_info_t *bl32_ep_info)
-{
- SET_SECURITY_STATE(bl32_ep_info->h.attr, SECURE);
- /*
- * The Secure Payload Dispatcher service is responsible for
- * setting the SPSR prior to entry into the BL32 image.
- */
- bl32_ep_info->spsr = 0;
-}
-
-/*******************************************************************************
- * Populate the extents of memory available for loading BL32
- ******************************************************************************/
-void bl2_plat_get_bl32_meminfo(meminfo_t *bl32_meminfo)
-{
- /*
- * Populate the extents of memory available for loading BL32.
- */
- bl32_meminfo->total_base = BL32_BASE;
- bl32_meminfo->free_base = BL32_BASE;
- bl32_meminfo->total_size =
- (TSP_SEC_MEM_BASE + TSP_SEC_MEM_SIZE) - BL32_BASE;
- bl32_meminfo->free_size =
- (TSP_SEC_MEM_BASE + TSP_SEC_MEM_SIZE) - BL32_BASE;
-}
-#endif /* BL32_BASE */
-
-void bl2_plat_set_bl33_ep_info(image_info_t *image,
- entry_point_info_t *bl33_ep_info)
-{
- SET_SECURITY_STATE(bl33_ep_info->h.attr, NON_SECURE);
- bl33_ep_info->spsr = poplar_get_spsr_for_bl33_entry();
- bl33_ep_info->args.arg2 = image->image_size;
-}
-
-void bl2_plat_flush_bl31_params(void)
-{
- flush_dcache_range((unsigned long)&bl31_params_mem,
- sizeof(bl2_to_bl31_params_mem_t));
-}
-
-void bl2_plat_get_bl33_meminfo(meminfo_t *bl33_meminfo)
-{
- bl33_meminfo->total_base = DDR_BASE;
- bl33_meminfo->total_size = DDR_SIZE;
- bl33_meminfo->free_base = DDR_BASE;
- bl33_meminfo->free_size = DDR_SIZE;
-}
-#endif /* LOAD_IMAGE_V2 */
-
-void bl2_early_platform_setup(meminfo_t *mem_layout)
+void bl2_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+ u_register_t arg2, u_register_t arg3)
{
+ struct meminfo *mem_layout = (struct meminfo *)arg1;
#if !POPLAR_RECOVERY
struct mmc_device_info info;