Xilinx Versal NET
=================

Trusted Firmware-A implements the EL3 firmware layer for Xilinx Versal NET.
The platform only uses the runtime part of TF-A as Xilinx Versal NET already
has a BootROM (BL1) and PMC FW (BL2).

BL31 is TF-A.
BL32 is an optional Secure Payload.
BL33 is the non-secure world software (U-Boot, Linux etc).

To build:
```bash
make RESET_TO_BL31=1 CROSS_COMPILE=aarch64-none-elf- PLAT=versal_net bl31
```

To build bl32 TSP you have to rebuild bl31 too
```bash
make CROSS_COMPILE=aarch64-none-elf- PLAT=versal_net SPD=tspd RESET_TO_BL31=1 bl31 bl32
```

To build TF-A for JTAG DCC console:
```bash
make RESET_TO_BL31=1 CROSS_COMPILE=aarch64-none-elf- PLAT=versal_net VERSAL_NET_CONSOLE=dcc bl31
```

Xilinx Versal NET platform specific build options
-------------------------------------------------

*   `VERSAL_NET_ATF_MEM_BASE`: Specifies the base address of the bl31 binary.
*   `VERSAL_NET_ATF_MEM_SIZE`: Specifies the size of the memory region of the bl31 binary.
*   `VERSAL_NET_BL32_MEM_BASE`: Specifies the base address of the bl32 binary.
*   `VERSAL_NET_BL32_MEM_SIZE`: Specifies the size of the memory region of the bl32 binary.

*   `VERSAL_NET_CONSOLE`: Select the console driver. Options:
    -   `pl011`, `pl011_0`: ARM pl011 UART 0 (default)
    -   `pl011_1`         : ARM pl011 UART 1
    -   `dcc`             : JTAG Debug Communication Channel(DCC)

*   `TFA_NO_PM` : Platform Management support.
    -    0 : Enable Platform Management (Default)
    -    1 : Disable Platform Management