diff --git a/include/plat/marvell/a3700/common/armada_common.h b/include/plat/marvell/a3700/common/armada_common.h
new file mode 100644
index 0000000..9fc4634
--- /dev/null
+++ b/include/plat/marvell/a3700/common/armada_common.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __ARMADA_COMMON_H__
+#define __ARMADA_COMMON_H__
+
+#include <io_addr_dec.h>
+#include <stdint.h>
+
+int marvell_get_io_dec_win_conf(struct dec_win_config **win, uint32_t *size);
+
+#endif /* __ARMADA_COMMON_H__ */
diff --git a/include/plat/marvell/a3700/common/board_marvell_def.h b/include/plat/marvell/a3700/common/board_marvell_def.h
new file mode 100644
index 0000000..49a1a5c
--- /dev/null
+++ b/include/plat/marvell/a3700/common/board_marvell_def.h
@@ -0,0 +1,77 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:	BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __BOARD_MARVELL_DEF_H__
+#define __BOARD_MARVELL_DEF_H__
+
+/*
+ * Required platform porting definitions common to all ARM
+ * development platforms
+ */
+
+/* Size of cacheable stacks */
+#if IMAGE_BL1
+#if TRUSTED_BOARD_BOOT
+# define PLATFORM_STACK_SIZE 0x1000
+#else
+# define PLATFORM_STACK_SIZE 0x440
+#endif
+#elif IMAGE_BL2
+# if TRUSTED_BOARD_BOOT
+#  define PLATFORM_STACK_SIZE 0x1000
+# else
+#  define PLATFORM_STACK_SIZE 0x400
+# endif
+#elif IMAGE_BL31
+# define PLATFORM_STACK_SIZE 0x400
+#elif IMAGE_BL32
+# define PLATFORM_STACK_SIZE 0x440
+#endif
+
+/*
+ * PLAT_MARVELL_MMAP_ENTRIES depends on the number of entries in the
+ * plat_arm_mmap array defined for each BL stage.
+ */
+#if IMAGE_BLE
+#  define PLAT_MARVELL_MMAP_ENTRIES	3
+#endif
+#if IMAGE_BL1
+#  if TRUSTED_BOARD_BOOT
+#   define PLAT_MARVELL_MMAP_ENTRIES	7
+#  else
+#   define PLAT_MARVELL_MMAP_ENTRIES	6
+#  endif	/* TRUSTED_BOARD_BOOT */
+#endif
+#if IMAGE_BL2
+#  define PLAT_MARVELL_MMAP_ENTRIES	8
+#endif
+#if IMAGE_BL31
+#define PLAT_MARVELL_MMAP_ENTRIES	5
+#endif
+
+/*
+ * Platform specific page table and MMU setup constants
+ */
+#if IMAGE_BL1
+#define MAX_XLAT_TABLES			4
+#elif IMAGE_BLE
+#  define MAX_XLAT_TABLES		4
+#elif IMAGE_BL2
+#  define MAX_XLAT_TABLES		4
+#elif IMAGE_BL31
+# define MAX_XLAT_TABLES		4
+#elif IMAGE_BL32
+#  define MAX_XLAT_TABLES		4
+#endif
+
+#define MAX_IO_DEVICES			3
+#define MAX_IO_HANDLES			4
+
+#define PLAT_MARVELL_TRUSTED_SRAM_SIZE	0x80000	/* 512 KB */
+
+
+#endif /* __BOARD_MARVELL_DEF_H__ */
diff --git a/include/plat/marvell/a3700/common/marvell_def.h b/include/plat/marvell/a3700/common/marvell_def.h
new file mode 100644
index 0000000..6c3a524
--- /dev/null
+++ b/include/plat/marvell/a3700/common/marvell_def.h
@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:	BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __MARVELL_DEF_H__
+#define __MARVELL_DEF_H__
+
+#include <arch.h>
+#include <common_def.h>
+#include <platform_def.h>
+#include <tbbr_img_def.h>
+#include <xlat_tables.h>
+
+
+/****************************************************************************
+ * Definitions common to all MARVELL standard platforms
+ ****************************************************************************
+ */
+/* Special value used to verify platform parameters from BL2 to BL31 */
+#define MARVELL_BL31_PLAT_PARAM_VAL		0x0f1e2d3c4b5a6978ULL
+
+#define PLAT_MARVELL_NORTHB_COUNT		1
+
+#define PLAT_MARVELL_CLUSTER_COUNT		1
+
+#define MARVELL_CACHE_WRITEBACK_SHIFT		6
+
+/*
+ * Macros mapping the MPIDR Affinity levels to MARVELL Platform Power levels.
+ * The power levels have a 1:1 mapping with the MPIDR affinity levels.
+ */
+#define MARVELL_PWR_LVL0		MPIDR_AFFLVL0
+#define MARVELL_PWR_LVL1		MPIDR_AFFLVL1
+#define MARVELL_PWR_LVL2		MPIDR_AFFLVL2
+
+/*
+ *  Macros for local power states in Marvell platforms encoded by State-ID field
+ *  within the power-state parameter.
+ */
+/* Local power state for power domains in Run state. */
+#define MARVELL_LOCAL_STATE_RUN	0
+/* Local power state for retention. Valid only for CPU power domains */
+#define MARVELL_LOCAL_STATE_RET	1
+/* Local power state for OFF/power-down.
+ * Valid for CPU and cluster power domains
+ */
+#define MARVELL_LOCAL_STATE_OFF	2
+
+/* The first 4KB of Trusted SRAM are used as shared memory */
+#define MARVELL_TRUSTED_SRAM_BASE	PLAT_MARVELL_ATF_BASE
+#define MARVELL_SHARED_RAM_BASE		MARVELL_TRUSTED_SRAM_BASE
+#define MARVELL_SHARED_RAM_SIZE		0x00001000	/* 4 KB */
+
+/* The remaining Trusted SRAM is used to load the BL images */
+#define MARVELL_BL_RAM_BASE		(MARVELL_SHARED_RAM_BASE + \
+					 MARVELL_SHARED_RAM_SIZE)
+#define MARVELL_BL_RAM_SIZE		(PLAT_MARVELL_TRUSTED_SRAM_SIZE - \
+					 MARVELL_SHARED_RAM_SIZE)
+
+#define MARVELL_DRAM_BASE		ULL(0x0)
+#define MARVELL_DRAM_SIZE		ULL(0x20000000)
+#define MARVELL_DRAM_END		(MARVELL_DRAM_BASE + \
+					 MARVELL_DRAM_SIZE - 1)
+
+#define MARVELL_IRQ_SEC_PHY_TIMER		29
+
+#define MARVELL_IRQ_SEC_SGI_0		8
+#define MARVELL_IRQ_SEC_SGI_1		9
+#define MARVELL_IRQ_SEC_SGI_2		10
+#define MARVELL_IRQ_SEC_SGI_3		11
+#define MARVELL_IRQ_SEC_SGI_4		12
+#define MARVELL_IRQ_SEC_SGI_5		13
+#define MARVELL_IRQ_SEC_SGI_6		14
+#define MARVELL_IRQ_SEC_SGI_7		15
+
+#define MARVELL_MAP_SHARED_RAM		MAP_REGION_FLAT(		 \
+						MARVELL_SHARED_RAM_BASE, \
+						MARVELL_SHARED_RAM_SIZE, \
+						MT_MEMORY | MT_RW | MT_SECURE)
+
+#define MARVELL_MAP_DRAM		MAP_REGION_FLAT(		\
+						MARVELL_DRAM_BASE,	\
+						MARVELL_DRAM_SIZE,	\
+						MT_MEMORY | MT_RW | MT_NS)
+
+
+/*
+ * The number of regions like RO(code), coherent and data required by
+ * different BL stages which need to be mapped in the MMU.
+ */
+#if USE_COHERENT_MEM
+#define MARVELL_BL_REGIONS		3
+#else
+#define MARVELL_BL_REGIONS		2
+#endif
+
+#define MAX_MMAP_REGIONS		(PLAT_MARVELL_MMAP_ENTRIES + \
+					 MARVELL_BL_REGIONS)
+
+#define MARVELL_CONSOLE_BAUDRATE	115200
+
+/****************************************************************************
+ * Required platform porting definitions common to all MARVELL std. platforms
+ ****************************************************************************
+ */
+#define PLAT_PHY_ADDR_SPACE_SIZE	(1ULL << 32)
+#define PLAT_VIRT_ADDR_SPACE_SIZE	(1ULL << 32)
+
+/*
+ * This macro defines the deepest retention state possible. A higher state
+ * id will represent an invalid or a power down state.
+ */
+#define PLAT_MAX_RET_STATE		MARVELL_LOCAL_STATE_RET
+
+/*
+ * This macro defines the deepest power down states possible. Any state ID
+ * higher than this is invalid.
+ */
+#define PLAT_MAX_OFF_STATE		MARVELL_LOCAL_STATE_OFF
+
+
+#define PLATFORM_CORE_COUNT		PLAT_MARVELL_CLUSTER_CORE_COUNT
+
+/*
+ * Some data must be aligned on the biggest cache line size in the platform.
+ * This is known only to the platform as it might have a combination of
+ * integrated and external caches.
+ */
+#define CACHE_WRITEBACK_GRANULE		(1 << MARVELL_CACHE_WRITEBACK_SHIFT)
+
+
+/*****************************************************************************
+ * BL1 specific defines.
+ * BL1 RW data is relocated from ROM to RAM at runtime so we need 2 sets of
+ * addresses.
+ *****************************************************************************
+ */
+#define BL1_RO_BASE		PLAT_MARVELL_TRUSTED_ROM_BASE
+#define BL1_RO_LIMIT		(PLAT_MARVELL_TRUSTED_ROM_BASE	\
+					+ PLAT_MARVELL_TRUSTED_ROM_SIZE)
+/*
+ * Put BL1 RW at the top of the Trusted SRAM.
+ */
+#define BL1_RW_BASE		(MARVELL_BL_RAM_BASE +		\
+					MARVELL_BL_RAM_SIZE -	\
+					PLAT_MARVELL_MAX_BL1_RW_SIZE)
+#define BL1_RW_LIMIT		(MARVELL_BL_RAM_BASE + MARVELL_BL_RAM_SIZE)
+
+/*****************************************************************************
+ * BL2 specific defines.
+ *****************************************************************************
+ */
+/*
+ * Put BL2 just below BL31.
+ */
+#define BL2_BASE		(BL31_BASE - PLAT_MARVELL_MAX_BL2_SIZE)
+#define BL2_LIMIT		BL31_BASE
+
+/*****************************************************************************
+ * BL31 specific defines.
+ *****************************************************************************
+ */
+/*
+ * Put BL31 at the top of the Trusted SRAM.
+ */
+#define BL31_BASE		(MARVELL_BL_RAM_BASE + \
+					MARVELL_BL_RAM_SIZE - \
+					PLAT_MARVEL_MAX_BL31_SIZE)
+#define BL31_PROGBITS_LIMIT	BL1_RW_BASE
+#define BL31_LIMIT			(MARVELL_BL_RAM_BASE +	\
+					 MARVELL_BL_RAM_SIZE)
+
+
+#endif /* __MARVELL_DEF_H__ */
diff --git a/include/plat/marvell/a3700/common/plat_marvell.h b/include/plat/marvell/a3700/common/plat_marvell.h
new file mode 100644
index 0000000..f733d04
--- /dev/null
+++ b/include/plat/marvell/a3700/common/plat_marvell.h
@@ -0,0 +1,96 @@
+/*
+ * Copyright (C) 2016 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:	BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __PLAT_MARVELL_H__
+#define __PLAT_MARVELL_H__
+
+#include <bl_common.h>
+#include <cassert.h>
+#include <cpu_data.h>
+#include <stdint.h>
+#include <xlat_tables.h>
+
+/*
+ * Extern declarations common to Marvell standard platforms
+ */
+extern const mmap_region_t plat_marvell_mmap[];
+
+#define MARVELL_CASSERT_MMAP						\
+	CASSERT((ARRAY_SIZE(plat_marvell_mmap) + MARVELL_BL_REGIONS)	\
+		<= MAX_MMAP_REGIONS,					\
+		assert_max_mmap_regions)
+
+/*
+ * Utility functions common to Marvell standard platforms
+ */
+void marvell_setup_page_tables(uintptr_t total_base,
+			       size_t total_size,
+			       uintptr_t code_start,
+			       uintptr_t code_limit,
+			       uintptr_t rodata_start,
+			       uintptr_t rodata_limit
+#if USE_COHERENT_MEM
+			     , uintptr_t coh_start,
+			       uintptr_t coh_limit
+#endif
+);
+
+/* IO storage utility functions */
+void marvell_io_setup(void);
+
+/* Systimer utility function */
+void marvell_configure_sys_timer(void);
+
+/* Topology utility function */
+int marvell_check_mpidr(u_register_t mpidr);
+
+/* BL1 utility functions */
+void marvell_bl1_early_platform_setup(void);
+void marvell_bl1_platform_setup(void);
+void marvell_bl1_plat_arch_setup(void);
+
+/* BL2 utility functions */
+void marvell_bl2_early_platform_setup(meminfo_t *mem_layout);
+void marvell_bl2_platform_setup(void);
+void marvell_bl2_plat_arch_setup(void);
+uint32_t marvell_get_spsr_for_bl32_entry(void);
+uint32_t marvell_get_spsr_for_bl33_entry(void);
+
+/* BL31 utility functions */
+void marvell_bl31_early_platform_setup(void *from_bl2,
+				       uintptr_t soc_fw_config,
+				       uintptr_t hw_config,
+				       void *plat_params_from_bl2);
+void marvell_bl31_platform_setup(void);
+void marvell_bl31_plat_runtime_setup(void);
+void marvell_bl31_plat_arch_setup(void);
+
+/* FIP TOC validity check */
+int marvell_io_is_toc_valid(void);
+
+/*
+ * PSCI functionality
+ */
+void marvell_psci_arch_init(int idx);
+void plat_marvell_system_reset(void);
+
+/*
+ * Optional functions required in Marvell standard platforms
+ */
+void plat_marvell_io_setup(void);
+int plat_marvell_get_alt_image_source(
+	unsigned int image_id,
+	uintptr_t *dev_handle,
+	uintptr_t *image_spec);
+unsigned int plat_marvell_calc_core_pos(u_register_t mpidr);
+
+void plat_marvell_interconnect_init(void);
+void plat_marvell_interconnect_enter_coherency(void);
+
+const mmap_region_t *plat_marvell_get_mmap(void);
+
+#endif /* __PLAT_MARVELL_H__ */
diff --git a/include/plat/marvell/common/aarch64/marvell_macros.S b/include/plat/marvell/common/aarch64/marvell_macros.S
index 0102af0..faf1070 100644
--- a/include/plat/marvell/common/aarch64/marvell_macros.S
+++ b/include/plat/marvell/common/aarch64/marvell_macros.S
@@ -45,7 +45,7 @@
 	 * Clobbers: x0 - x10, sp
 	 * ---------------------------------------------
 	 */
-	.macro arm_print_gic_regs
+	.macro marvell_print_gic_regs
 	/* Check for GICv3 system register access */
 	mrs	x7, id_aa64pfr0_el1
 	ubfx	x7, x7, #ID_AA64PFR0_GIC_SHIFT, #ID_AA64PFR0_GIC_WIDTH
diff --git a/include/plat/marvell/common/mvebu.h b/include/plat/marvell/common/mvebu.h
index a20e538..a7d6c3f 100644
--- a/include/plat/marvell/common/mvebu.h
+++ b/include/plat/marvell/common/mvebu.h
@@ -32,7 +32,8 @@
 #define ROUND_UP_TO_POW_OF_2(number)	(1 << \
 					(32 - __builtin_clz((number) - 1)))
 
-#define _1MB_				(1024ULL*1024ULL)
-#define _1GB_				(_1MB_*1024ULL)
+#define _1MB_				(1024ULL * 1024ULL)
+#define _1GB_				(_1MB_ * 1024ULL)
+#define _2GB_				(2 * _1GB_)
 
 #endif	/* MVEBU_H */