plat: marvell: Add support for Armada-37xx SoC platform
Add supprot for Marvell platforms based on Armada-37xx SoC.
This includes support for the official Armada-3720 modular
development board and EspressoBin community board.
The Armada-37xx SoC contains dual Cortex-A53 Application CPU,
single secure CPU (Cortex-M3) and the following interfaces:
- SATA 3.0
- USB 3.0 and USB 2.0
- PCIe
- SDIO (supports boot from eMMC)
- SPI
- UART
- I2c
- Gigabit Ethernet
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
diff --git a/include/plat/marvell/a3700/common/armada_common.h b/include/plat/marvell/a3700/common/armada_common.h
new file mode 100644
index 0000000..9fc4634
--- /dev/null
+++ b/include/plat/marvell/a3700/common/armada_common.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __ARMADA_COMMON_H__
+#define __ARMADA_COMMON_H__
+
+#include <io_addr_dec.h>
+#include <stdint.h>
+
+int marvell_get_io_dec_win_conf(struct dec_win_config **win, uint32_t *size);
+
+#endif /* __ARMADA_COMMON_H__ */
diff --git a/include/plat/marvell/a3700/common/board_marvell_def.h b/include/plat/marvell/a3700/common/board_marvell_def.h
new file mode 100644
index 0000000..49a1a5c
--- /dev/null
+++ b/include/plat/marvell/a3700/common/board_marvell_def.h
@@ -0,0 +1,77 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __BOARD_MARVELL_DEF_H__
+#define __BOARD_MARVELL_DEF_H__
+
+/*
+ * Required platform porting definitions common to all ARM
+ * development platforms
+ */
+
+/* Size of cacheable stacks */
+#if IMAGE_BL1
+#if TRUSTED_BOARD_BOOT
+# define PLATFORM_STACK_SIZE 0x1000
+#else
+# define PLATFORM_STACK_SIZE 0x440
+#endif
+#elif IMAGE_BL2
+# if TRUSTED_BOARD_BOOT
+# define PLATFORM_STACK_SIZE 0x1000
+# else
+# define PLATFORM_STACK_SIZE 0x400
+# endif
+#elif IMAGE_BL31
+# define PLATFORM_STACK_SIZE 0x400
+#elif IMAGE_BL32
+# define PLATFORM_STACK_SIZE 0x440
+#endif
+
+/*
+ * PLAT_MARVELL_MMAP_ENTRIES depends on the number of entries in the
+ * plat_arm_mmap array defined for each BL stage.
+ */
+#if IMAGE_BLE
+# define PLAT_MARVELL_MMAP_ENTRIES 3
+#endif
+#if IMAGE_BL1
+# if TRUSTED_BOARD_BOOT
+# define PLAT_MARVELL_MMAP_ENTRIES 7
+# else
+# define PLAT_MARVELL_MMAP_ENTRIES 6
+# endif /* TRUSTED_BOARD_BOOT */
+#endif
+#if IMAGE_BL2
+# define PLAT_MARVELL_MMAP_ENTRIES 8
+#endif
+#if IMAGE_BL31
+#define PLAT_MARVELL_MMAP_ENTRIES 5
+#endif
+
+/*
+ * Platform specific page table and MMU setup constants
+ */
+#if IMAGE_BL1
+#define MAX_XLAT_TABLES 4
+#elif IMAGE_BLE
+# define MAX_XLAT_TABLES 4
+#elif IMAGE_BL2
+# define MAX_XLAT_TABLES 4
+#elif IMAGE_BL31
+# define MAX_XLAT_TABLES 4
+#elif IMAGE_BL32
+# define MAX_XLAT_TABLES 4
+#endif
+
+#define MAX_IO_DEVICES 3
+#define MAX_IO_HANDLES 4
+
+#define PLAT_MARVELL_TRUSTED_SRAM_SIZE 0x80000 /* 512 KB */
+
+
+#endif /* __BOARD_MARVELL_DEF_H__ */
diff --git a/include/plat/marvell/a3700/common/marvell_def.h b/include/plat/marvell/a3700/common/marvell_def.h
new file mode 100644
index 0000000..6c3a524
--- /dev/null
+++ b/include/plat/marvell/a3700/common/marvell_def.h
@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __MARVELL_DEF_H__
+#define __MARVELL_DEF_H__
+
+#include <arch.h>
+#include <common_def.h>
+#include <platform_def.h>
+#include <tbbr_img_def.h>
+#include <xlat_tables.h>
+
+
+/****************************************************************************
+ * Definitions common to all MARVELL standard platforms
+ ****************************************************************************
+ */
+/* Special value used to verify platform parameters from BL2 to BL31 */
+#define MARVELL_BL31_PLAT_PARAM_VAL 0x0f1e2d3c4b5a6978ULL
+
+#define PLAT_MARVELL_NORTHB_COUNT 1
+
+#define PLAT_MARVELL_CLUSTER_COUNT 1
+
+#define MARVELL_CACHE_WRITEBACK_SHIFT 6
+
+/*
+ * Macros mapping the MPIDR Affinity levels to MARVELL Platform Power levels.
+ * The power levels have a 1:1 mapping with the MPIDR affinity levels.
+ */
+#define MARVELL_PWR_LVL0 MPIDR_AFFLVL0
+#define MARVELL_PWR_LVL1 MPIDR_AFFLVL1
+#define MARVELL_PWR_LVL2 MPIDR_AFFLVL2
+
+/*
+ * Macros for local power states in Marvell platforms encoded by State-ID field
+ * within the power-state parameter.
+ */
+/* Local power state for power domains in Run state. */
+#define MARVELL_LOCAL_STATE_RUN 0
+/* Local power state for retention. Valid only for CPU power domains */
+#define MARVELL_LOCAL_STATE_RET 1
+/* Local power state for OFF/power-down.
+ * Valid for CPU and cluster power domains
+ */
+#define MARVELL_LOCAL_STATE_OFF 2
+
+/* The first 4KB of Trusted SRAM are used as shared memory */
+#define MARVELL_TRUSTED_SRAM_BASE PLAT_MARVELL_ATF_BASE
+#define MARVELL_SHARED_RAM_BASE MARVELL_TRUSTED_SRAM_BASE
+#define MARVELL_SHARED_RAM_SIZE 0x00001000 /* 4 KB */
+
+/* The remaining Trusted SRAM is used to load the BL images */
+#define MARVELL_BL_RAM_BASE (MARVELL_SHARED_RAM_BASE + \
+ MARVELL_SHARED_RAM_SIZE)
+#define MARVELL_BL_RAM_SIZE (PLAT_MARVELL_TRUSTED_SRAM_SIZE - \
+ MARVELL_SHARED_RAM_SIZE)
+
+#define MARVELL_DRAM_BASE ULL(0x0)
+#define MARVELL_DRAM_SIZE ULL(0x20000000)
+#define MARVELL_DRAM_END (MARVELL_DRAM_BASE + \
+ MARVELL_DRAM_SIZE - 1)
+
+#define MARVELL_IRQ_SEC_PHY_TIMER 29
+
+#define MARVELL_IRQ_SEC_SGI_0 8
+#define MARVELL_IRQ_SEC_SGI_1 9
+#define MARVELL_IRQ_SEC_SGI_2 10
+#define MARVELL_IRQ_SEC_SGI_3 11
+#define MARVELL_IRQ_SEC_SGI_4 12
+#define MARVELL_IRQ_SEC_SGI_5 13
+#define MARVELL_IRQ_SEC_SGI_6 14
+#define MARVELL_IRQ_SEC_SGI_7 15
+
+#define MARVELL_MAP_SHARED_RAM MAP_REGION_FLAT( \
+ MARVELL_SHARED_RAM_BASE, \
+ MARVELL_SHARED_RAM_SIZE, \
+ MT_MEMORY | MT_RW | MT_SECURE)
+
+#define MARVELL_MAP_DRAM MAP_REGION_FLAT( \
+ MARVELL_DRAM_BASE, \
+ MARVELL_DRAM_SIZE, \
+ MT_MEMORY | MT_RW | MT_NS)
+
+
+/*
+ * The number of regions like RO(code), coherent and data required by
+ * different BL stages which need to be mapped in the MMU.
+ */
+#if USE_COHERENT_MEM
+#define MARVELL_BL_REGIONS 3
+#else
+#define MARVELL_BL_REGIONS 2
+#endif
+
+#define MAX_MMAP_REGIONS (PLAT_MARVELL_MMAP_ENTRIES + \
+ MARVELL_BL_REGIONS)
+
+#define MARVELL_CONSOLE_BAUDRATE 115200
+
+/****************************************************************************
+ * Required platform porting definitions common to all MARVELL std. platforms
+ ****************************************************************************
+ */
+#define PLAT_PHY_ADDR_SPACE_SIZE (1ULL << 32)
+#define PLAT_VIRT_ADDR_SPACE_SIZE (1ULL << 32)
+
+/*
+ * This macro defines the deepest retention state possible. A higher state
+ * id will represent an invalid or a power down state.
+ */
+#define PLAT_MAX_RET_STATE MARVELL_LOCAL_STATE_RET
+
+/*
+ * This macro defines the deepest power down states possible. Any state ID
+ * higher than this is invalid.
+ */
+#define PLAT_MAX_OFF_STATE MARVELL_LOCAL_STATE_OFF
+
+
+#define PLATFORM_CORE_COUNT PLAT_MARVELL_CLUSTER_CORE_COUNT
+
+/*
+ * Some data must be aligned on the biggest cache line size in the platform.
+ * This is known only to the platform as it might have a combination of
+ * integrated and external caches.
+ */
+#define CACHE_WRITEBACK_GRANULE (1 << MARVELL_CACHE_WRITEBACK_SHIFT)
+
+
+/*****************************************************************************
+ * BL1 specific defines.
+ * BL1 RW data is relocated from ROM to RAM at runtime so we need 2 sets of
+ * addresses.
+ *****************************************************************************
+ */
+#define BL1_RO_BASE PLAT_MARVELL_TRUSTED_ROM_BASE
+#define BL1_RO_LIMIT (PLAT_MARVELL_TRUSTED_ROM_BASE \
+ + PLAT_MARVELL_TRUSTED_ROM_SIZE)
+/*
+ * Put BL1 RW at the top of the Trusted SRAM.
+ */
+#define BL1_RW_BASE (MARVELL_BL_RAM_BASE + \
+ MARVELL_BL_RAM_SIZE - \
+ PLAT_MARVELL_MAX_BL1_RW_SIZE)
+#define BL1_RW_LIMIT (MARVELL_BL_RAM_BASE + MARVELL_BL_RAM_SIZE)
+
+/*****************************************************************************
+ * BL2 specific defines.
+ *****************************************************************************
+ */
+/*
+ * Put BL2 just below BL31.
+ */
+#define BL2_BASE (BL31_BASE - PLAT_MARVELL_MAX_BL2_SIZE)
+#define BL2_LIMIT BL31_BASE
+
+/*****************************************************************************
+ * BL31 specific defines.
+ *****************************************************************************
+ */
+/*
+ * Put BL31 at the top of the Trusted SRAM.
+ */
+#define BL31_BASE (MARVELL_BL_RAM_BASE + \
+ MARVELL_BL_RAM_SIZE - \
+ PLAT_MARVEL_MAX_BL31_SIZE)
+#define BL31_PROGBITS_LIMIT BL1_RW_BASE
+#define BL31_LIMIT (MARVELL_BL_RAM_BASE + \
+ MARVELL_BL_RAM_SIZE)
+
+
+#endif /* __MARVELL_DEF_H__ */
diff --git a/include/plat/marvell/a3700/common/plat_marvell.h b/include/plat/marvell/a3700/common/plat_marvell.h
new file mode 100644
index 0000000..f733d04
--- /dev/null
+++ b/include/plat/marvell/a3700/common/plat_marvell.h
@@ -0,0 +1,96 @@
+/*
+ * Copyright (C) 2016 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __PLAT_MARVELL_H__
+#define __PLAT_MARVELL_H__
+
+#include <bl_common.h>
+#include <cassert.h>
+#include <cpu_data.h>
+#include <stdint.h>
+#include <xlat_tables.h>
+
+/*
+ * Extern declarations common to Marvell standard platforms
+ */
+extern const mmap_region_t plat_marvell_mmap[];
+
+#define MARVELL_CASSERT_MMAP \
+ CASSERT((ARRAY_SIZE(plat_marvell_mmap) + MARVELL_BL_REGIONS) \
+ <= MAX_MMAP_REGIONS, \
+ assert_max_mmap_regions)
+
+/*
+ * Utility functions common to Marvell standard platforms
+ */
+void marvell_setup_page_tables(uintptr_t total_base,
+ size_t total_size,
+ uintptr_t code_start,
+ uintptr_t code_limit,
+ uintptr_t rodata_start,
+ uintptr_t rodata_limit
+#if USE_COHERENT_MEM
+ , uintptr_t coh_start,
+ uintptr_t coh_limit
+#endif
+);
+
+/* IO storage utility functions */
+void marvell_io_setup(void);
+
+/* Systimer utility function */
+void marvell_configure_sys_timer(void);
+
+/* Topology utility function */
+int marvell_check_mpidr(u_register_t mpidr);
+
+/* BL1 utility functions */
+void marvell_bl1_early_platform_setup(void);
+void marvell_bl1_platform_setup(void);
+void marvell_bl1_plat_arch_setup(void);
+
+/* BL2 utility functions */
+void marvell_bl2_early_platform_setup(meminfo_t *mem_layout);
+void marvell_bl2_platform_setup(void);
+void marvell_bl2_plat_arch_setup(void);
+uint32_t marvell_get_spsr_for_bl32_entry(void);
+uint32_t marvell_get_spsr_for_bl33_entry(void);
+
+/* BL31 utility functions */
+void marvell_bl31_early_platform_setup(void *from_bl2,
+ uintptr_t soc_fw_config,
+ uintptr_t hw_config,
+ void *plat_params_from_bl2);
+void marvell_bl31_platform_setup(void);
+void marvell_bl31_plat_runtime_setup(void);
+void marvell_bl31_plat_arch_setup(void);
+
+/* FIP TOC validity check */
+int marvell_io_is_toc_valid(void);
+
+/*
+ * PSCI functionality
+ */
+void marvell_psci_arch_init(int idx);
+void plat_marvell_system_reset(void);
+
+/*
+ * Optional functions required in Marvell standard platforms
+ */
+void plat_marvell_io_setup(void);
+int plat_marvell_get_alt_image_source(
+ unsigned int image_id,
+ uintptr_t *dev_handle,
+ uintptr_t *image_spec);
+unsigned int plat_marvell_calc_core_pos(u_register_t mpidr);
+
+void plat_marvell_interconnect_init(void);
+void plat_marvell_interconnect_enter_coherency(void);
+
+const mmap_region_t *plat_marvell_get_mmap(void);
+
+#endif /* __PLAT_MARVELL_H__ */