rcar_gen3: drivers: qos: Fix checkpatch issues
Fix checkpatch issues, clean up macro indentation. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: Id0f1e322b44562f9863e885583d89fbf47cab91b
diff --git a/drivers/staging/renesas/rcar/qos/qos_init.c b/drivers/staging/renesas/rcar/qos/qos_init.c
index c5f9a42..7a564cf 100644
--- a/drivers/staging/renesas/rcar/qos/qos_init.c
+++ b/drivers/staging/renesas/rcar/qos/qos_init.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2015-2018, Renesas Electronics Corporation. All rights reserved.
+ * Copyright (c) 2015-2019, Renesas Electronics Corporation. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -50,42 +50,41 @@
#endif
/* Product Register */
-#define PRR (0xFFF00044U)
-#define PRR_PRODUCT_MASK (0x00007F00U)
-#define PRR_CUT_MASK (0x000000FFU)
-#define PRR_PRODUCT_H3 (0x00004F00U) /* R-Car H3 */
-#define PRR_PRODUCT_M3 (0x00005200U) /* R-Car M3 */
-#define PRR_PRODUCT_V3M (0x00005400U) /* R-Car V3M */
-#define PRR_PRODUCT_M3N (0x00005500U) /* R-Car M3N */
-#define PRR_PRODUCT_E3 (0x00005700U) /* R-Car E3 */
-#define PRR_PRODUCT_D3 (0x00005800U) /* R-Car D3 */
-#define PRR_PRODUCT_10 (0x00U)
-#define PRR_PRODUCT_11 (0x01U)
-#define PRR_PRODUCT_20 (0x10U)
-#define PRR_PRODUCT_21 (0x11U)
-#define PRR_PRODUCT_30 (0x20U)
+#define PRR 0xFFF00044U
+#define PRR_PRODUCT_MASK 0x00007F00U
+#define PRR_CUT_MASK 0x000000FFU
+#define PRR_PRODUCT_H3 0x00004F00U /* R-Car H3 */
+#define PRR_PRODUCT_M3 0x00005200U /* R-Car M3 */
+#define PRR_PRODUCT_V3M 0x00005400U /* R-Car V3M */
+#define PRR_PRODUCT_M3N 0x00005500U /* R-Car M3N */
+#define PRR_PRODUCT_E3 0x00005700U /* R-Car E3 */
+#define PRR_PRODUCT_D3 0x00005800U /* R-Car D3 */
+#define PRR_PRODUCT_10 0x00U
+#define PRR_PRODUCT_11 0x01U
+#define PRR_PRODUCT_20 0x10U
+#define PRR_PRODUCT_21 0x11U
+#define PRR_PRODUCT_30 0x20U
#if (RCAR_LSI != RCAR_E3) && (RCAR_LSI != RCAR_D3) && (RCAR_LSI != RCAR_V3M)
#define DRAM_CH_CNT 0x04
uint32_t qos_init_ddr_ch;
uint8_t qos_init_ddr_phyvalid;
-
#endif
#define PRR_PRODUCT_ERR(reg) \
- do{ \
+ do { \
ERROR("LSI Product ID(PRR=0x%x) QoS " \
- "initialize not supported.\n",reg); \
+ "initialize not supported.\n", reg); \
panic(); \
- } while(0)
+ } while (0)
#define PRR_CUT_ERR(reg) \
- do{ \
+ do { \
ERROR("LSI Cut ID(PRR=0x%x) QoS " \
- "initialize not supported.\n",reg); \
+ "initialize not supported.\n", reg); \
panic(); \
- } while(0)
+ } while (0)
void rcar_qos_init(void)
{