/*
 * Copyright (c) 2013-2020, ARM Limited and Contributors. All rights reserved.
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */

#include <arch.h>
#include <asm_macros.S>
#include <assert_macros.S>
#include <context.h>
#include <el3_common_macros.S>

#if CTX_INCLUDE_EL2_REGS
	.global	el2_sysregs_context_save
	.global	el2_sysregs_context_restore
#endif

	.global	el1_sysregs_context_save
	.global	el1_sysregs_context_restore
#if CTX_INCLUDE_FPREGS
	.global	fpregs_context_save
	.global	fpregs_context_restore
#endif
	.global	save_gp_pmcr_pauth_regs
	.global	restore_gp_pmcr_pauth_regs
	.global save_and_update_ptw_el1_sys_regs
	.global	el3_exit

#if CTX_INCLUDE_EL2_REGS

/* -----------------------------------------------------
 * The following function strictly follows the AArch64
 * PCS to use x9-x17 (temporary caller-saved registers)
 * to save EL2 system register context. It assumes that
 * 'x0' is pointing to a 'el2_sys_regs' structure where
 * the register context will be saved.
 *
 * The following registers are not added.
 * AMEVCNTVOFF0<n>_EL2
 * AMEVCNTVOFF1<n>_EL2
 * ICH_AP0R<n>_EL2
 * ICH_AP1R<n>_EL2
 * ICH_LR<n>_EL2
 * -----------------------------------------------------
 */

func el2_sysregs_context_save
	mrs	x9, actlr_el2
	mrs	x10, afsr0_el2
	stp	x9, x10, [x0, #CTX_ACTLR_EL2]

	mrs	x11, afsr1_el2
	mrs	x12, amair_el2
	stp	x11, x12, [x0, #CTX_AFSR1_EL2]

	mrs	x13, cnthctl_el2
	mrs	x14, cnthp_ctl_el2
	stp	x13, x14, [x0, #CTX_CNTHCTL_EL2]

	mrs	x15, cnthp_cval_el2
	mrs	x16, cnthp_tval_el2
	stp	x15, x16, [x0, #CTX_CNTHP_CVAL_EL2]

	mrs	x17, cntvoff_el2
	mrs	x9, cptr_el2
	stp	x17, x9, [x0, #CTX_CNTVOFF_EL2]

	mrs	x10, dbgvcr32_el2
	mrs	x11, elr_el2
	stp	x10, x11, [x0, #CTX_DBGVCR32_EL2]

	mrs	x14, esr_el2
	mrs	x15, far_el2
	stp	x14, x15, [x0, #CTX_ESR_EL2]

	mrs	x16, hacr_el2
	mrs	x17, hcr_el2
	stp	x16, x17, [x0, #CTX_HACR_EL2]

	mrs	x9, hpfar_el2
	mrs	x10, hstr_el2
	stp	x9, x10, [x0, #CTX_HPFAR_EL2]

	mrs	x11, ICC_SRE_EL2
	mrs	x12, ICH_HCR_EL2
	stp	x11, x12, [x0, #CTX_ICC_SRE_EL2]

	mrs	x13, ICH_VMCR_EL2
	mrs	x14, mair_el2
	stp	x13, x14, [x0, #CTX_ICH_VMCR_EL2]

	mrs	x15, mdcr_el2
	mrs	x16, PMSCR_EL2
	stp	x15, x16, [x0, #CTX_MDCR_EL2]

	mrs	x17, sctlr_el2
	mrs	x9, spsr_el2
	stp	x17, x9, [x0, #CTX_SCTLR_EL2]

	mrs	x10, sp_el2
	mrs	x11, tcr_el2
	stp	x10, x11, [x0, #CTX_SP_EL2]

	mrs	x12, tpidr_el2
	mrs	x13, ttbr0_el2
	stp	x12, x13, [x0, #CTX_TPIDR_EL2]

	mrs	x14, vbar_el2
	mrs	x15, vmpidr_el2
	stp	x14, x15, [x0, #CTX_VBAR_EL2]

	mrs	x16, vpidr_el2
	mrs	x17, vtcr_el2
	stp	x16, x17, [x0, #CTX_VPIDR_EL2]

	mrs	x9, vttbr_el2
	str	x9, [x0, #CTX_VTTBR_EL2]

#if CTX_INCLUDE_MTE_REGS
	mrs	x10, TFSR_EL2
	str	x10, [x0, #CTX_TFSR_EL2]
#endif

#if ENABLE_MPAM_FOR_LOWER_ELS
	mrs	x9, MPAM2_EL2
	mrs	x10, MPAMHCR_EL2
	stp	x9, x10, [x0, #CTX_MPAM2_EL2]

	mrs	x11, MPAMVPM0_EL2
	mrs	x12, MPAMVPM1_EL2
	stp	x11, x12, [x0, #CTX_MPAMVPM0_EL2]

	mrs	x13, MPAMVPM2_EL2
	mrs	x14, MPAMVPM3_EL2
	stp	x13, x14, [x0, #CTX_MPAMVPM2_EL2]

	mrs	x15, MPAMVPM4_EL2
	mrs	x16, MPAMVPM5_EL2
	stp	x15, x16, [x0, #CTX_MPAMVPM4_EL2]

	mrs	x17, MPAMVPM6_EL2
	mrs	x9, MPAMVPM7_EL2
	stp	x17, x9, [x0, #CTX_MPAMVPM6_EL2]

	mrs	x10, MPAMVPMV_EL2
	str	x10, [x0, #CTX_MPAMVPMV_EL2]
#endif


#if ARM_ARCH_AT_LEAST(8, 6)
	mrs	x11, HAFGRTR_EL2
	mrs	x12, HDFGRTR_EL2
	stp	x11, x12, [x0, #CTX_HAFGRTR_EL2]

	mrs	x13, HDFGWTR_EL2
	mrs	x14, HFGITR_EL2
	stp	x13, x14, [x0, #CTX_HDFGWTR_EL2]

	mrs	x15, HFGRTR_EL2
	mrs	x16, HFGWTR_EL2
	stp	x15, x16, [x0, #CTX_HFGRTR_EL2]

	mrs	x17, CNTPOFF_EL2
	str	x17, [x0, #CTX_CNTPOFF_EL2]
#endif

#if ARM_ARCH_AT_LEAST(8, 4)
	mrs	x9, cnthps_ctl_el2
	mrs	x10, cnthps_cval_el2
	stp	x9, x10, [x0, #CTX_CNTHPS_CTL_EL2]

	mrs	x11, cnthps_tval_el2
	mrs	x12, cnthvs_ctl_el2
	stp	x11, x12, [x0, #CTX_CNTHPS_TVAL_EL2]

	mrs	x13, cnthvs_cval_el2
	mrs	x14, cnthvs_tval_el2
	stp	x13, x14, [x0, #CTX_CNTHVS_CVAL_EL2]

	mrs	x15, cnthv_ctl_el2
	mrs	x16, cnthv_cval_el2
	stp	x15, x16, [x0, #CTX_CNTHV_CTL_EL2]

	mrs	x17, cnthv_tval_el2
	mrs	x9, contextidr_el2
	stp	x17, x9, [x0, #CTX_CNTHV_TVAL_EL2]

	mrs	x10, sder32_el2
	str	x10, [x0, #CTX_SDER32_EL2]

	mrs	x11, ttbr1_el2
	str	x11, [x0, #CTX_TTBR1_EL2]

	mrs	x12, vdisr_el2
	str	x12, [x0, #CTX_VDISR_EL2]

	mrs	x13, vncr_el2
	str	x13, [x0, #CTX_VNCR_EL2]

	mrs	x14, vsesr_el2
	str	x14, [x0, #CTX_VSESR_EL2]

	mrs	x15, vstcr_el2
	str	x15, [x0, #CTX_VSTCR_EL2]

	mrs	x16, vsttbr_el2
	str	x16, [x0, #CTX_VSTTBR_EL2]

	mrs	x17, TRFCR_EL2
	str	x17, [x0, #CTX_TRFCR_EL2]
#endif

#if ARM_ARCH_AT_LEAST(8, 5)
	mrs	x9, scxtnum_el2
	str	x9, [x0, #CTX_SCXTNUM_EL2]
#endif

	ret
endfunc el2_sysregs_context_save

/* -----------------------------------------------------
 * The following function strictly follows the AArch64
 * PCS to use x9-x17 (temporary caller-saved registers)
 * to restore EL2 system register context.  It assumes
 * that 'x0' is pointing to a 'el2_sys_regs' structure
 * from where the register context will be restored

 * The following registers are not restored
 * AMEVCNTVOFF0<n>_EL2
 * AMEVCNTVOFF1<n>_EL2
 * ICH_AP0R<n>_EL2
 * ICH_AP1R<n>_EL2
 * ICH_LR<n>_EL2
 * -----------------------------------------------------
 */
func el2_sysregs_context_restore

	ldp	x9, x10, [x0, #CTX_ACTLR_EL2]
	msr	actlr_el2, x9
	msr	afsr0_el2, x10

	ldp	x11, x12, [x0, #CTX_AFSR1_EL2]
	msr	afsr1_el2, x11
	msr	amair_el2, x12

	ldp	x13, x14, [x0, #CTX_CNTHCTL_EL2]
	msr	cnthctl_el2, x13
	msr	cnthp_ctl_el2, x14

	ldp	x15, x16, [x0, #CTX_CNTHP_CVAL_EL2]
	msr	cnthp_cval_el2, x15
	msr	cnthp_tval_el2, x16

	ldp	x17, x9, [x0, #CTX_CNTVOFF_EL2]
	msr	cntvoff_el2, x17
	msr	cptr_el2, x9

	ldp	x10, x11, [x0, #CTX_DBGVCR32_EL2]
	msr	dbgvcr32_el2, x10
	msr	elr_el2, x11

	ldp	x14, x15, [x0, #CTX_ESR_EL2]
	msr	esr_el2, x14
	msr	far_el2, x15

	ldp	x16, x17, [x0, #CTX_HACR_EL2]
	msr	hacr_el2, x16
	msr	hcr_el2, x17

	ldp	x9, x10, [x0, #CTX_HPFAR_EL2]
	msr	hpfar_el2, x9
	msr	hstr_el2, x10

	ldp	x11, x12, [x0, #CTX_ICC_SRE_EL2]
	msr	ICC_SRE_EL2, x11
	msr	ICH_HCR_EL2, x12

	ldp	x13, x14, [x0, #CTX_ICH_VMCR_EL2]
	msr	ICH_VMCR_EL2, x13
	msr	mair_el2, x14

	ldp	x15, x16, [x0, #CTX_MDCR_EL2]
	msr	mdcr_el2, x15
	msr	PMSCR_EL2, x16

	ldp	x17, x9, [x0, #CTX_SCTLR_EL2]
	msr	sctlr_el2, x17
	msr	spsr_el2, x9

	ldp	x10, x11, [x0, #CTX_SP_EL2]
	msr	sp_el2, x10
	msr	tcr_el2, x11

	ldp	x12, x13, [x0, #CTX_TPIDR_EL2]
	msr	tpidr_el2, x12
	msr	ttbr0_el2, x13

	ldp	x13, x14, [x0, #CTX_VBAR_EL2]
	msr	vbar_el2, x13
	msr	vmpidr_el2, x14

	ldp	x15, x16, [x0, #CTX_VPIDR_EL2]
	msr	vpidr_el2, x15
	msr	vtcr_el2, x16

	ldr	x17, [x0, #CTX_VTTBR_EL2]
	msr	vttbr_el2, x17

#if CTX_INCLUDE_MTE_REGS
	ldr	x9, [x0, #CTX_TFSR_EL2]
	msr	TFSR_EL2, x9
#endif

#if ENABLE_MPAM_FOR_LOWER_ELS
	ldp	x10, x11, [x0, #CTX_MPAM2_EL2]
	msr	MPAM2_EL2, x10
	msr	MPAMHCR_EL2, x11

	ldp	x12, x13, [x0, #CTX_MPAMVPM0_EL2]
	msr	MPAMVPM0_EL2, x12
	msr	MPAMVPM1_EL2, x13

	ldp	x14, x15, [x0, #CTX_MPAMVPM2_EL2]
	msr	MPAMVPM2_EL2, x14
	msr	MPAMVPM3_EL2, x15

	ldp	x16, x17, [x0, #CTX_MPAMVPM4_EL2]
	msr	MPAMVPM4_EL2, x16
	msr	MPAMVPM5_EL2, x17

	ldp	x9, x10, [x0, #CTX_MPAMVPM6_EL2]
	msr	MPAMVPM6_EL2, x9
	msr	MPAMVPM7_EL2, x10

	ldr	x11, [x0, #CTX_MPAMVPMV_EL2]
	msr	MPAMVPMV_EL2, x11
#endif

#if ARM_ARCH_AT_LEAST(8, 6)
	ldp	x12, x13, [x0, #CTX_HAFGRTR_EL2]
	msr	HAFGRTR_EL2, x12
	msr	HDFGRTR_EL2, x13

	ldp	x14, x15, [x0, #CTX_HDFGWTR_EL2]
	msr	HDFGWTR_EL2, x14
	msr	HFGITR_EL2, x15

	ldp	x16, x17, [x0, #CTX_HFGRTR_EL2]
	msr	HFGRTR_EL2, x16
	msr	HFGWTR_EL2, x17

	ldr	x9, [x0, #CTX_CNTPOFF_EL2]
	msr	CNTPOFF_EL2, x9
#endif

#if ARM_ARCH_AT_LEAST(8, 4)
	ldp	x10, x11, [x0, #CTX_CNTHPS_CTL_EL2]
	msr	cnthps_ctl_el2, x10
	msr	cnthps_cval_el2, x11

	ldp	x12, x13, [x0, #CTX_CNTHPS_TVAL_EL2]
	msr	cnthps_tval_el2, x12
	msr	cnthvs_ctl_el2, x13

	ldp	x14, x15, [x0, #CTX_CNTHVS_CVAL_EL2]
	msr	cnthvs_cval_el2, x14
	msr	cnthvs_tval_el2, x15

	ldp	x16, x17, [x0, #CTX_CNTHV_CTL_EL2]
	msr	cnthv_ctl_el2, x16
	msr	cnthv_cval_el2, x17

	ldp	x9, x10, [x0, #CTX_CNTHV_TVAL_EL2]
	msr	cnthv_tval_el2, x9
	msr	contextidr_el2, x10

	ldr	x11, [x0, #CTX_SDER32_EL2]
	msr	sder32_el2, x11

	ldr	x12, [x0, #CTX_TTBR1_EL2]
	msr	ttbr1_el2, x12

	ldr	x13, [x0, #CTX_VDISR_EL2]
	msr	vdisr_el2, x13

	ldr	x14, [x0, #CTX_VNCR_EL2]
	msr	vncr_el2, x14

	ldr	x15, [x0, #CTX_VSESR_EL2]
	msr	vsesr_el2, x15

	ldr	x16, [x0, #CTX_VSTCR_EL2]
	msr	vstcr_el2, x16

	ldr	x17, [x0, #CTX_VSTTBR_EL2]
	msr	vsttbr_el2, x17

	ldr	x9, [x0, #CTX_TRFCR_EL2]
	msr	TRFCR_EL2, x9
#endif

#if ARM_ARCH_AT_LEAST(8, 5)
	ldr	x10, [x0, #CTX_SCXTNUM_EL2]
	msr	scxtnum_el2, x10
#endif

	ret
endfunc el2_sysregs_context_restore

#endif /* CTX_INCLUDE_EL2_REGS */

/* ------------------------------------------------------------------
 * The following function strictly follows the AArch64 PCS to use
 * x9-x17 (temporary caller-saved registers) to save EL1 system
 * register context. It assumes that 'x0' is pointing to a
 * 'el1_sys_regs' structure where the register context will be saved.
 * ------------------------------------------------------------------
 */
func el1_sysregs_context_save

	mrs	x9, spsr_el1
	mrs	x10, elr_el1
	stp	x9, x10, [x0, #CTX_SPSR_EL1]

#if !ERRATA_SPECULATIVE_AT
	mrs	x15, sctlr_el1
	mrs	x16, tcr_el1
	stp	x15, x16, [x0, #CTX_SCTLR_EL1]
#endif

	mrs	x17, cpacr_el1
	mrs	x9, csselr_el1
	stp	x17, x9, [x0, #CTX_CPACR_EL1]

	mrs	x10, sp_el1
	mrs	x11, esr_el1
	stp	x10, x11, [x0, #CTX_SP_EL1]

	mrs	x12, ttbr0_el1
	mrs	x13, ttbr1_el1
	stp	x12, x13, [x0, #CTX_TTBR0_EL1]

	mrs	x14, mair_el1
	mrs	x15, amair_el1
	stp	x14, x15, [x0, #CTX_MAIR_EL1]

	mrs	x16, actlr_el1
	mrs	x17, tpidr_el1
	stp	x16, x17, [x0, #CTX_ACTLR_EL1]

	mrs	x9, tpidr_el0
	mrs	x10, tpidrro_el0
	stp	x9, x10, [x0, #CTX_TPIDR_EL0]

	mrs	x13, par_el1
	mrs	x14, far_el1
	stp	x13, x14, [x0, #CTX_PAR_EL1]

	mrs	x15, afsr0_el1
	mrs	x16, afsr1_el1
	stp	x15, x16, [x0, #CTX_AFSR0_EL1]

	mrs	x17, contextidr_el1
	mrs	x9, vbar_el1
	stp	x17, x9, [x0, #CTX_CONTEXTIDR_EL1]

	/* Save AArch32 system registers if the build has instructed so */
#if CTX_INCLUDE_AARCH32_REGS
	mrs	x11, spsr_abt
	mrs	x12, spsr_und
	stp	x11, x12, [x0, #CTX_SPSR_ABT]

	mrs	x13, spsr_irq
	mrs	x14, spsr_fiq
	stp	x13, x14, [x0, #CTX_SPSR_IRQ]

	mrs	x15, dacr32_el2
	mrs	x16, ifsr32_el2
	stp	x15, x16, [x0, #CTX_DACR32_EL2]
#endif

	/* Save NS timer registers if the build has instructed so */
#if NS_TIMER_SWITCH
	mrs	x10, cntp_ctl_el0
	mrs	x11, cntp_cval_el0
	stp	x10, x11, [x0, #CTX_CNTP_CTL_EL0]

	mrs	x12, cntv_ctl_el0
	mrs	x13, cntv_cval_el0
	stp	x12, x13, [x0, #CTX_CNTV_CTL_EL0]

	mrs	x14, cntkctl_el1
	str	x14, [x0, #CTX_CNTKCTL_EL1]
#endif

	/* Save MTE system registers if the build has instructed so */
#if CTX_INCLUDE_MTE_REGS
	mrs	x15, TFSRE0_EL1
	mrs	x16, TFSR_EL1
	stp	x15, x16, [x0, #CTX_TFSRE0_EL1]

	mrs	x9, RGSR_EL1
	mrs	x10, GCR_EL1
	stp	x9, x10, [x0, #CTX_RGSR_EL1]
#endif

	ret
endfunc el1_sysregs_context_save

/* ------------------------------------------------------------------
 * The following function strictly follows the AArch64 PCS to use
 * x9-x17 (temporary caller-saved registers) to restore EL1 system
 * register context.  It assumes that 'x0' is pointing to a
 * 'el1_sys_regs' structure from where the register context will be
 * restored
 * ------------------------------------------------------------------
 */
func el1_sysregs_context_restore

	ldp	x9, x10, [x0, #CTX_SPSR_EL1]
	msr	spsr_el1, x9
	msr	elr_el1, x10

#if !ERRATA_SPECULATIVE_AT
	ldp	x15, x16, [x0, #CTX_SCTLR_EL1]
	msr	sctlr_el1, x15
	msr	tcr_el1, x16
#endif

	ldp	x17, x9, [x0, #CTX_CPACR_EL1]
	msr	cpacr_el1, x17
	msr	csselr_el1, x9

	ldp	x10, x11, [x0, #CTX_SP_EL1]
	msr	sp_el1, x10
	msr	esr_el1, x11

	ldp	x12, x13, [x0, #CTX_TTBR0_EL1]
	msr	ttbr0_el1, x12
	msr	ttbr1_el1, x13

	ldp	x14, x15, [x0, #CTX_MAIR_EL1]
	msr	mair_el1, x14
	msr	amair_el1, x15

	ldp 	x16, x17, [x0, #CTX_ACTLR_EL1]
	msr	actlr_el1, x16
	msr	tpidr_el1, x17

	ldp	x9, x10, [x0, #CTX_TPIDR_EL0]
	msr	tpidr_el0, x9
	msr	tpidrro_el0, x10

	ldp	x13, x14, [x0, #CTX_PAR_EL1]
	msr	par_el1, x13
	msr	far_el1, x14

	ldp	x15, x16, [x0, #CTX_AFSR0_EL1]
	msr	afsr0_el1, x15
	msr	afsr1_el1, x16

	ldp	x17, x9, [x0, #CTX_CONTEXTIDR_EL1]
	msr	contextidr_el1, x17
	msr	vbar_el1, x9

	/* Restore AArch32 system registers if the build has instructed so */
#if CTX_INCLUDE_AARCH32_REGS
	ldp	x11, x12, [x0, #CTX_SPSR_ABT]
	msr	spsr_abt, x11
	msr	spsr_und, x12

	ldp	x13, x14, [x0, #CTX_SPSR_IRQ]
	msr	spsr_irq, x13
	msr	spsr_fiq, x14

	ldp	x15, x16, [x0, #CTX_DACR32_EL2]
	msr	dacr32_el2, x15
	msr	ifsr32_el2, x16
#endif
	/* Restore NS timer registers if the build has instructed so */
#if NS_TIMER_SWITCH
	ldp	x10, x11, [x0, #CTX_CNTP_CTL_EL0]
	msr	cntp_ctl_el0, x10
	msr	cntp_cval_el0, x11

	ldp	x12, x13, [x0, #CTX_CNTV_CTL_EL0]
	msr	cntv_ctl_el0, x12
	msr	cntv_cval_el0, x13

	ldr	x14, [x0, #CTX_CNTKCTL_EL1]
	msr	cntkctl_el1, x14
#endif
	/* Restore MTE system registers if the build has instructed so */
#if CTX_INCLUDE_MTE_REGS
	ldp	x11, x12, [x0, #CTX_TFSRE0_EL1]
	msr	TFSRE0_EL1, x11
	msr	TFSR_EL1, x12

	ldp	x13, x14, [x0, #CTX_RGSR_EL1]
	msr	RGSR_EL1, x13
	msr	GCR_EL1, x14
#endif

	/* No explict ISB required here as ERET covers it */
	ret
endfunc el1_sysregs_context_restore

/* ------------------------------------------------------------------
 * The following function follows the aapcs_64 strictly to use
 * x9-x17 (temporary caller-saved registers according to AArch64 PCS)
 * to save floating point register context. It assumes that 'x0' is
 * pointing to a 'fp_regs' structure where the register context will
 * be saved.
 *
 * Access to VFP registers will trap if CPTR_EL3.TFP is set.
 * However currently we don't use VFP registers nor set traps in
 * Trusted Firmware, and assume it's cleared.
 *
 * TODO: Revisit when VFP is used in secure world
 * ------------------------------------------------------------------
 */
#if CTX_INCLUDE_FPREGS
func fpregs_context_save
	stp	q0, q1, [x0, #CTX_FP_Q0]
	stp	q2, q3, [x0, #CTX_FP_Q2]
	stp	q4, q5, [x0, #CTX_FP_Q4]
	stp	q6, q7, [x0, #CTX_FP_Q6]
	stp	q8, q9, [x0, #CTX_FP_Q8]
	stp	q10, q11, [x0, #CTX_FP_Q10]
	stp	q12, q13, [x0, #CTX_FP_Q12]
	stp	q14, q15, [x0, #CTX_FP_Q14]
	stp	q16, q17, [x0, #CTX_FP_Q16]
	stp	q18, q19, [x0, #CTX_FP_Q18]
	stp	q20, q21, [x0, #CTX_FP_Q20]
	stp	q22, q23, [x0, #CTX_FP_Q22]
	stp	q24, q25, [x0, #CTX_FP_Q24]
	stp	q26, q27, [x0, #CTX_FP_Q26]
	stp	q28, q29, [x0, #CTX_FP_Q28]
	stp	q30, q31, [x0, #CTX_FP_Q30]

	mrs	x9, fpsr
	str	x9, [x0, #CTX_FP_FPSR]

	mrs	x10, fpcr
	str	x10, [x0, #CTX_FP_FPCR]

#if CTX_INCLUDE_AARCH32_REGS
	mrs	x11, fpexc32_el2
	str	x11, [x0, #CTX_FP_FPEXC32_EL2]
#endif
	ret
endfunc fpregs_context_save

/* ------------------------------------------------------------------
 * The following function follows the aapcs_64 strictly to use x9-x17
 * (temporary caller-saved registers according to AArch64 PCS) to
 * restore floating point register context. It assumes that 'x0' is
 * pointing to a 'fp_regs' structure from where the register context
 * will be restored.
 *
 * Access to VFP registers will trap if CPTR_EL3.TFP is set.
 * However currently we don't use VFP registers nor set traps in
 * Trusted Firmware, and assume it's cleared.
 *
 * TODO: Revisit when VFP is used in secure world
 * ------------------------------------------------------------------
 */
func fpregs_context_restore
	ldp	q0, q1, [x0, #CTX_FP_Q0]
	ldp	q2, q3, [x0, #CTX_FP_Q2]
	ldp	q4, q5, [x0, #CTX_FP_Q4]
	ldp	q6, q7, [x0, #CTX_FP_Q6]
	ldp	q8, q9, [x0, #CTX_FP_Q8]
	ldp	q10, q11, [x0, #CTX_FP_Q10]
	ldp	q12, q13, [x0, #CTX_FP_Q12]
	ldp	q14, q15, [x0, #CTX_FP_Q14]
	ldp	q16, q17, [x0, #CTX_FP_Q16]
	ldp	q18, q19, [x0, #CTX_FP_Q18]
	ldp	q20, q21, [x0, #CTX_FP_Q20]
	ldp	q22, q23, [x0, #CTX_FP_Q22]
	ldp	q24, q25, [x0, #CTX_FP_Q24]
	ldp	q26, q27, [x0, #CTX_FP_Q26]
	ldp	q28, q29, [x0, #CTX_FP_Q28]
	ldp	q30, q31, [x0, #CTX_FP_Q30]

	ldr	x9, [x0, #CTX_FP_FPSR]
	msr	fpsr, x9

	ldr	x10, [x0, #CTX_FP_FPCR]
	msr	fpcr, x10

#if CTX_INCLUDE_AARCH32_REGS
	ldr	x11, [x0, #CTX_FP_FPEXC32_EL2]
	msr	fpexc32_el2, x11
#endif
	/*
	 * No explict ISB required here as ERET to
	 * switch to secure EL1 or non-secure world
	 * covers it
	 */

	ret
endfunc fpregs_context_restore
#endif /* CTX_INCLUDE_FPREGS */

/* ------------------------------------------------------------------
 * The following function is used to save and restore all the general
 * purpose and ARMv8.3-PAuth (if enabled) registers.
 * It also checks if Secure Cycle Counter is not disabled in MDCR_EL3
 * when ARMv8.5-PMU is implemented, and if called from Non-secure
 * state saves PMCR_EL0 and disables Cycle Counter.
 *
 * Ideally we would only save and restore the callee saved registers
 * when a world switch occurs but that type of implementation is more
 * complex. So currently we will always save and restore these
 * registers on entry and exit of EL3.
 * These are not macros to ensure their invocation fits within the 32
 * instructions per exception vector.
 * clobbers: x18
 * ------------------------------------------------------------------
 */
func save_gp_pmcr_pauth_regs
	stp	x0, x1, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X0]
	stp	x2, x3, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X2]
	stp	x4, x5, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X4]
	stp	x6, x7, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X6]
	stp	x8, x9, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X8]
	stp	x10, x11, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X10]
	stp	x12, x13, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X12]
	stp	x14, x15, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X14]
	stp	x16, x17, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X16]
	stp	x18, x19, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X18]
	stp	x20, x21, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X20]
	stp	x22, x23, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X22]
	stp	x24, x25, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X24]
	stp	x26, x27, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X26]
	stp	x28, x29, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X28]
	mrs	x18, sp_el0
	str	x18, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_SP_EL0]

	/* ----------------------------------------------------------
	 * Check if earlier initialization MDCR_EL3.SCCD to 1 failed,
	 * meaning that ARMv8-PMU is not implemented and PMCR_EL0
	 * should be saved in non-secure context.
	 * ----------------------------------------------------------
	 */
	mrs	x9, mdcr_el3
	tst	x9, #MDCR_SCCD_BIT
	bne	1f

	/* Secure Cycle Counter is not disabled */
	mrs	x9, pmcr_el0

	/* Check caller's security state */
	mrs	x10, scr_el3
	tst	x10, #SCR_NS_BIT
	beq	2f

	/* Save PMCR_EL0 if called from Non-secure state */
	str	x9, [sp, #CTX_EL3STATE_OFFSET + CTX_PMCR_EL0]

	/* Disable cycle counter when event counting is prohibited */
2:	orr	x9, x9, #PMCR_EL0_DP_BIT
	msr	pmcr_el0, x9
	isb
1:
#if CTX_INCLUDE_PAUTH_REGS
	/* ----------------------------------------------------------
 	 * Save the ARMv8.3-PAuth keys as they are not banked
 	 * by exception level
	 * ----------------------------------------------------------
	 */
	add	x19, sp, #CTX_PAUTH_REGS_OFFSET

	mrs	x20, APIAKeyLo_EL1	/* x21:x20 = APIAKey */
	mrs	x21, APIAKeyHi_EL1
	mrs	x22, APIBKeyLo_EL1	/* x23:x22 = APIBKey */
	mrs	x23, APIBKeyHi_EL1
	mrs	x24, APDAKeyLo_EL1	/* x25:x24 = APDAKey */
	mrs	x25, APDAKeyHi_EL1
	mrs	x26, APDBKeyLo_EL1	/* x27:x26 = APDBKey */
	mrs	x27, APDBKeyHi_EL1
	mrs	x28, APGAKeyLo_EL1	/* x29:x28 = APGAKey */
	mrs	x29, APGAKeyHi_EL1

	stp	x20, x21, [x19, #CTX_PACIAKEY_LO]
	stp	x22, x23, [x19, #CTX_PACIBKEY_LO]
	stp	x24, x25, [x19, #CTX_PACDAKEY_LO]
	stp	x26, x27, [x19, #CTX_PACDBKEY_LO]
	stp	x28, x29, [x19, #CTX_PACGAKEY_LO]
#endif /* CTX_INCLUDE_PAUTH_REGS */

	ret
endfunc save_gp_pmcr_pauth_regs

/* ------------------------------------------------------------------
 * This function restores ARMv8.3-PAuth (if enabled) and all general
 * purpose registers except x30 from the CPU context.
 * x30 register must be explicitly restored by the caller.
 * ------------------------------------------------------------------
 */
func restore_gp_pmcr_pauth_regs
#if CTX_INCLUDE_PAUTH_REGS
 	/* Restore the ARMv8.3 PAuth keys */
	add	x10, sp, #CTX_PAUTH_REGS_OFFSET

	ldp	x0, x1, [x10, #CTX_PACIAKEY_LO]	/* x1:x0 = APIAKey */
	ldp	x2, x3, [x10, #CTX_PACIBKEY_LO]	/* x3:x2 = APIBKey */
	ldp	x4, x5, [x10, #CTX_PACDAKEY_LO]	/* x5:x4 = APDAKey */
	ldp	x6, x7, [x10, #CTX_PACDBKEY_LO]	/* x7:x6 = APDBKey */
	ldp	x8, x9, [x10, #CTX_PACGAKEY_LO]	/* x9:x8 = APGAKey */

	msr	APIAKeyLo_EL1, x0
	msr	APIAKeyHi_EL1, x1
	msr	APIBKeyLo_EL1, x2
	msr	APIBKeyHi_EL1, x3
	msr	APDAKeyLo_EL1, x4
	msr	APDAKeyHi_EL1, x5
	msr	APDBKeyLo_EL1, x6
	msr	APDBKeyHi_EL1, x7
	msr	APGAKeyLo_EL1, x8
	msr	APGAKeyHi_EL1, x9
#endif /* CTX_INCLUDE_PAUTH_REGS */

	/* ----------------------------------------------------------
	 * Restore PMCR_EL0 when returning to Non-secure state if
	 * Secure Cycle Counter is not disabled in MDCR_EL3 when
	 * ARMv8.5-PMU is implemented.
	 * ----------------------------------------------------------
	 */
	mrs	x0, scr_el3
	tst	x0, #SCR_NS_BIT
	beq	2f

	/* ----------------------------------------------------------
	 * Back to Non-secure state.
	 * Check if earlier initialization MDCR_EL3.SCCD to 1 failed,
	 * meaning that ARMv8-PMU is not implemented and PMCR_EL0
	 * should be restored from non-secure context.
	 * ----------------------------------------------------------
	 */
	mrs	x0, mdcr_el3
	tst	x0, #MDCR_SCCD_BIT
	bne	2f
	ldr	x0, [sp, #CTX_EL3STATE_OFFSET + CTX_PMCR_EL0]
	msr	pmcr_el0, x0
2:
	ldp	x0, x1, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X0]
	ldp	x2, x3, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X2]
	ldp	x4, x5, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X4]
	ldp	x6, x7, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X6]
	ldp	x8, x9, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X8]
	ldp	x10, x11, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X10]
	ldp	x12, x13, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X12]
	ldp	x14, x15, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X14]
	ldp	x16, x17, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X16]
	ldp	x18, x19, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X18]
	ldp	x20, x21, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X20]
	ldp	x22, x23, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X22]
	ldp	x24, x25, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X24]
	ldp	x26, x27, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X26]
	ldr	x28, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_SP_EL0]
	msr	sp_el0, x28
	ldp	x28, x29, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X28]
	ret
endfunc restore_gp_pmcr_pauth_regs

/*
 * In case of ERRATA_SPECULATIVE_AT, save SCTLR_EL1 and TCR_EL1
 * registers and update EL1 registers to disable stage1 and stage2
 * page table walk
 */
func save_and_update_ptw_el1_sys_regs
	/* ----------------------------------------------------------
	 * Save only sctlr_el1 and tcr_el1 registers
	 * ----------------------------------------------------------
	 */
	mrs	x29, sctlr_el1
	str	x29, [sp, #(CTX_EL1_SYSREGS_OFFSET + CTX_SCTLR_EL1)]
	mrs	x29, tcr_el1
	str	x29, [sp, #(CTX_EL1_SYSREGS_OFFSET + CTX_TCR_EL1)]

	/* ------------------------------------------------------------
	 * Must follow below order in order to disable page table
	 * walk for lower ELs (EL1 and EL0). First step ensures that
	 * page table walk is disabled for stage1 and second step
	 * ensures that page table walker should use TCR_EL1.EPDx
	 * bits to perform address translation. ISB ensures that CPU
	 * does these 2 steps in order.
	 *
	 * 1. Update TCR_EL1.EPDx bits to disable page table walk by
	 *    stage1.
	 * 2. Enable MMU bit to avoid identity mapping via stage2
	 *    and force TCR_EL1.EPDx to be used by the page table
	 *    walker.
	 * ------------------------------------------------------------
	 */
	orr	x29, x29, #(TCR_EPD0_BIT)
	orr	x29, x29, #(TCR_EPD1_BIT)
	msr	tcr_el1, x29
	isb
	mrs	x29, sctlr_el1
	orr	x29, x29, #SCTLR_M_BIT
	msr	sctlr_el1, x29
	isb

	ret
endfunc save_and_update_ptw_el1_sys_regs

/* ------------------------------------------------------------------
 * This routine assumes that the SP_EL3 is pointing to a valid
 * context structure from where the gp regs and other special
 * registers can be retrieved.
 * ------------------------------------------------------------------
 */
func el3_exit
#if ENABLE_ASSERTIONS
	/* el3_exit assumes SP_EL0 on entry */
	mrs	x17, spsel
	cmp	x17, #MODE_SP_EL0
	ASM_ASSERT(eq)
#endif

	/* ----------------------------------------------------------
	 * Save the current SP_EL0 i.e. the EL3 runtime stack which
	 * will be used for handling the next SMC.
	 * Then switch to SP_EL3.
	 * ----------------------------------------------------------
	 */
	mov	x17, sp
	msr	spsel, #MODE_SP_ELX
	str	x17, [sp, #CTX_EL3STATE_OFFSET + CTX_RUNTIME_SP]

	/* ----------------------------------------------------------
	 * Restore SPSR_EL3, ELR_EL3 and SCR_EL3 prior to ERET
	 * ----------------------------------------------------------
	 */
	ldr	x18, [sp, #CTX_EL3STATE_OFFSET + CTX_SCR_EL3]
	ldp	x16, x17, [sp, #CTX_EL3STATE_OFFSET + CTX_SPSR_EL3]
	msr	scr_el3, x18
	msr	spsr_el3, x16
	msr	elr_el3, x17

#if IMAGE_BL31 && DYNAMIC_WORKAROUND_CVE_2018_3639
	/* ----------------------------------------------------------
	 * Restore mitigation state as it was on entry to EL3
	 * ----------------------------------------------------------
	 */
	ldr	x17, [sp, #CTX_CVE_2018_3639_OFFSET + CTX_CVE_2018_3639_DISABLE]
	cbz	x17, 1f
	blr	x17
1:
#endif
	restore_ptw_el1_sys_regs

	/* ----------------------------------------------------------
	 * Restore general purpose (including x30), PMCR_EL0 and
	 * ARMv8.3-PAuth registers.
	 * Exit EL3 via ERET to a lower exception level.
 	 * ----------------------------------------------------------
 	 */
	bl	restore_gp_pmcr_pauth_regs
	ldr	x30, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_LR]

#if IMAGE_BL31 && RAS_EXTENSION
	/* ----------------------------------------------------------
	 * Issue Error Synchronization Barrier to synchronize SErrors
	 * before exiting EL3. We're running with EAs unmasked, so
	 * any synchronized errors would be taken immediately;
	 * therefore no need to inspect DISR_EL1 register.
 	 * ----------------------------------------------------------
	 */
	esb
#endif
	exception_return

endfunc el3_exit