feat(nuvoton): added support for npcm845x chip
Initial version
Signed-off-by: Margarita Glushkin <rutigl@gmail.com>
Change-Id: If433d325a90b519ae5f02411865bffd368ff2824
diff --git a/plat/nuvoton/npcm845x/platform.mk b/plat/nuvoton/npcm845x/platform.mk
new file mode 100644
index 0000000..f38ae29
--- /dev/null
+++ b/plat/nuvoton/npcm845x/platform.mk
@@ -0,0 +1,397 @@
+#
+# Copyright (c) 2015-2023, ARM Limited and Contributors. All rights reserved.
+#
+# Copyright (c) 2017-2023 Nuvoton Ltd.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# This is a debug flag for bring-up. It allows reducing CPU numbers
+# SECONDARY_BRINGUP := 1
+RESET_TO_BL31 := 1
+PMD_SPM_AT_SEL2 := 0
+#temporary until the RAM size is reduced
+USE_COHERENT_MEM := 1
+
+
+$(eval $(call add_define,RESET_TO_BL31))
+
+ifeq (${ARCH}, aarch64)
+# On ARM standard platorms, the TSP can execute from Trusted SRAM,
+# Trusted DRAM (if available) or the TZC secured area of DRAM.
+# TZC secured DRAM is the default.
+
+ARM_TSP_RAM_LOCATION ?= dram
+
+ifeq (${ARM_TSP_RAM_LOCATION}, tsram)
+ARM_TSP_RAM_LOCATION_ID = ARM_TRUSTED_SRAM_ID
+else ifeq (${ARM_TSP_RAM_LOCATION}, tdram)
+ARM_TSP_RAM_LOCATION_ID = ARM_TRUSTED_DRAM_ID
+else ifeq (${ARM_TSP_RAM_LOCATION}, dram)
+ARM_TSP_RAM_LOCATION_ID = ARM_DRAM_ID
+else
+$(error "Unsupported ARM_TSP_RAM_LOCATION value")
+endif
+
+# Process flags
+# Process ARM_BL31_IN_DRAM flag
+ARM_BL31_IN_DRAM := 0
+$(eval $(call assert_boolean,ARM_BL31_IN_DRAM))
+$(eval $(call add_define,ARM_BL31_IN_DRAM))
+else
+ARM_TSP_RAM_LOCATION_ID = ARM_TRUSTED_SRAM_ID
+endif
+
+$(eval $(call add_define,ARM_TSP_RAM_LOCATION_ID))
+
+# For the original power-state parameter format, the State-ID can be encoded
+# according to the recommended encoding or zero. This flag determines which
+# State-ID encoding to be parsed.
+ARM_RECOM_STATE_ID_ENC := 0
+
+# If the PSCI_EXTENDED_STATE_ID is set, then ARM_RECOM_STATE_ID_ENC
+# need to be set. Else throw a build error.
+ifeq (${PSCI_EXTENDED_STATE_ID}, 1)
+ifeq (${ARM_RECOM_STATE_ID_ENC}, 0)
+$(error Build option ARM_RECOM_STATE_ID_ENC needs to be set if \
+ PSCI_EXTENDED_STATE_ID is set for ARM platforms)
+endif
+endif
+
+# Process ARM_RECOM_STATE_ID_ENC flag
+$(eval $(call assert_boolean,ARM_RECOM_STATE_ID_ENC))
+$(eval $(call add_define,ARM_RECOM_STATE_ID_ENC))
+
+# Process ARM_DISABLE_TRUSTED_WDOG flag
+# By default, Trusted Watchdog is always enabled unless SPIN_ON_BL1_EXIT is set
+ARM_DISABLE_TRUSTED_WDOG := 0
+ifeq (${SPIN_ON_BL1_EXIT}, 1)
+ARM_DISABLE_TRUSTED_WDOG := 1
+endif
+$(eval $(call assert_boolean,ARM_DISABLE_TRUSTED_WDOG))
+$(eval $(call add_define,ARM_DISABLE_TRUSTED_WDOG))
+
+# Process ARM_CONFIG_CNTACR
+ARM_CONFIG_CNTACR := 1
+$(eval $(call assert_boolean,ARM_CONFIG_CNTACR))
+$(eval $(call add_define,ARM_CONFIG_CNTACR))
+
+# Process ARM_BL31_IN_DRAM flag
+ARM_BL31_IN_DRAM := 0
+$(eval $(call assert_boolean,ARM_BL31_IN_DRAM))
+$(eval $(call add_define,ARM_BL31_IN_DRAM))
+
+# Process ARM_PLAT_MT flag
+ARM_PLAT_MT := 0
+$(eval $(call assert_boolean,ARM_PLAT_MT))
+$(eval $(call add_define,ARM_PLAT_MT))
+
+# Use translation tables library v2 by default
+ARM_XLAT_TABLES_LIB_V1 := 0
+$(eval $(call assert_boolean,ARM_XLAT_TABLES_LIB_V1))
+$(eval $(call add_define,ARM_XLAT_TABLES_LIB_V1))
+
+# Don't have the Linux kernel as a BL33 image by default
+ARM_LINUX_KERNEL_AS_BL33 := 0
+$(eval $(call assert_boolean,ARM_LINUX_KERNEL_AS_BL33))
+$(eval $(call add_define,ARM_LINUX_KERNEL_AS_BL33))
+
+ifeq (${ARM_LINUX_KERNEL_AS_BL33},1)
+ifeq (${ARCH},aarch64)
+ifneq (${RESET_TO_BL31},1)
+$(error "ARM_LINUX_KERNEL_AS_BL33 is only available if RESET_TO_BL31=1.")
+endif
+else
+ifneq (${RESET_TO_SP_MIN},1)
+$(error "ARM_LINUX_KERNEL_AS_BL33 is only available if RESET_TO_SP_MIN=1.")
+endif
+endif
+
+ifndef PRELOADED_BL33_BASE
+$(error "PRELOADED_BL33_BASE must be set if ARM_LINUX_KERNEL_AS_BL33 is used.")
+endif
+
+ifndef ARM_PRELOADED_DTB_BASE
+$(error "ARM_PRELOADED_DTB_BASE must be set if ARM_LINUX_KERNEL_AS_BL33 is used.")
+endif
+
+$(eval $(call add_define,ARM_PRELOADED_DTB_BASE))
+endif
+
+# Use an implementation of SHA-256 with a smaller memory footprint
+# but reduced speed.
+$(eval $(call add_define,MBEDTLS_SHA256_SMALLER))
+
+# Add the build options to pack Trusted OS Extra1 and Trusted OS Extra2 images
+# in the FIP if the platform requires.
+ifneq ($(BL32_EXTRA1),)
+$(eval $(call TOOL_ADD_IMG,bl32_extra1,--tos-fw-extra1))
+endif
+ifneq ($(BL32_EXTRA2),)
+$(eval $(call TOOL_ADD_IMG,bl32_extra2,--tos-fw-extra2))
+endif
+
+# Enable PSCI_STAT_COUNT/RESIDENCY APIs on ARM platforms
+ENABLE_PSCI_STAT := 1
+ENABLE_PMF := 1
+
+# On ARM platforms, separate the code and read-only data sections to allow
+# mapping the former as executable and the latter as execute-never.
+SEPARATE_CODE_AND_RODATA := 1
+
+# On ARM platforms, disable SEPARATE_NOBITS_REGION by default. Both PROGBITS
+# and NOBITS sections of BL31 image are adjacent to each other and loaded
+# into Trusted SRAM.
+SEPARATE_NOBITS_REGION := 0
+
+# In order to support SEPARATE_NOBITS_REGION for Arm platforms, we need to load
+# BL31 PROGBITS into secure DRAM space and BL31 NOBITS into SRAM. Hence mandate
+# the build to require that ARM_BL31_IN_DRAM is enabled as well.
+ifeq ($(SEPARATE_NOBITS_REGION),1)
+ifneq ($(ARM_BL31_IN_DRAM),1)
+$(error For SEPARATE_NOBITS_REGION, ARM_BL31_IN_DRAM must be enabled)
+endif
+
+ifneq ($(RECLAIM_INIT_CODE),0)
+$(error For SEPARATE_NOBITS_REGION, RECLAIM_INIT_CODE cannot be supported)
+endif
+endif
+
+# Disable ARM Cryptocell by default
+ARM_CRYPTOCELL_INTEG := 0
+$(eval $(call assert_boolean,ARM_CRYPTOCELL_INTEG))
+$(eval $(call add_define,ARM_CRYPTOCELL_INTEG))
+
+# Enable PIE support for RESET_TO_BL31 case
+ifeq (${RESET_TO_BL31},1)
+ENABLE_PIE := 1
+endif
+
+# CryptoCell integration relies on coherent buffers for passing data from
+# the AP CPU to the CryptoCell
+
+ifeq (${ARM_CRYPTOCELL_INTEG},1)
+ifeq (${USE_COHERENT_MEM},0)
+$(error "ARM_CRYPTOCELL_INTEG needs USE_COHERENT_MEM to be set.")
+endif
+endif
+
+PLAT_INCLUDES := -Iinclude/plat/nuvoton/npcm845x \
+ -Iinclude/plat/nuvoton/common \
+ -Iinclude/drivers/nuvoton/npcm845x \
+
+ifeq (${ARCH}, aarch64)
+PLAT_INCLUDES += -Iinclude/plat/arm/common/aarch64
+endif
+
+# Include GICv3 driver files
+include drivers/arm/gic/v2/gicv2.mk
+
+NPCM850_GIC_SOURCES := ${GICV2_SOURCES}
+
+BL31_SOURCES +=lib/cpus/aarch64/cortex_a35.S \
+ plat/common/plat_psci_common.c \
+ drivers/ti/uart/aarch64/16550_console.S \
+ plat/nuvoton/npcm845x/npcm845x_psci.c \
+ plat/nuvoton/npcm845x/npcm845x_serial_port.c \
+ plat/nuvoton/common/nuvoton_topology.c \
+ plat/nuvoton/npcm845x/npcm845x_bl31_setup.c
+
+PLAT_BL_COMMON_SOURCES := drivers/delay_timer/delay_timer.c \
+ drivers/delay_timer/generic_delay_timer.c \
+ plat/common/plat_gicv2.c \
+ plat/arm/common/arm_gicv2.c \
+ plat/nuvoton/common/plat_nuvoton_gic.c \
+ ${NPCM850_GIC_SOURCES} \
+ plat/nuvoton/npcm845x/npcm845x_common.c \
+ plat/nuvoton/common/nuvoton_helpers.S \
+ lib/semihosting/semihosting.c \
+ lib/semihosting/${ARCH}/semihosting_call.S \
+ plat/arm/common/arm_common.c \
+ plat/arm/common/arm_console.c
+
+ifeq (${ARM_XLAT_TABLES_LIB_V1}, 1)
+PLAT_BL_COMMON_SOURCES += lib/xlat_tables/xlat_tables_common.c \
+ lib/xlat_tables/${ARCH}/xlat_tables.c
+else
+include lib/xlat_tables_v2/xlat_tables.mk
+
+PLAT_BL_COMMON_SOURCES += ${XLAT_TABLES_LIB_SRCS}
+endif
+
+ARM_IO_SOURCES += plat/arm/common/arm_io_storage.c \
+ plat/arm/common/fconf/arm_fconf_io.c
+
+ifeq (${SPD},spmd)
+ifeq (${SPMD_SPM_AT_SEL2},1)
+ARM_IO_SOURCES += plat/arm/common/fconf/arm_fconf_sp.c
+endif
+endif
+
+BL1_SOURCES += drivers/io/io_fip.c \
+ drivers/io/io_memmap.c \
+ drivers/io/io_storage.c \
+ plat/arm/common/arm_bl1_setup.c \
+ plat/arm/common/arm_err.c \
+ ${ARM_IO_SOURCES}
+
+ifdef EL3_PAYLOAD_BASE
+# Need the plat_arm_program_trusted_mailbox() function to release secondary CPUs
+# from their holding pen
+BL1_SOURCES += plat/arm/common/arm_pm.c
+endif
+
+BL2_SOURCES += drivers/delay_timer/delay_timer.c \
+ drivers/delay_timer/generic_delay_timer.c \
+ drivers/io/io_fip.c \
+ drivers/io/io_memmap.c \
+ drivers/io/io_storage.c \
+ plat/arm/common/arm_bl2_setup.c \
+ plat/arm/common/arm_err.c \
+ ${ARM_IO_SOURCES}
+
+# Firmware Configuration Framework sources
+include lib/fconf/fconf.mk
+
+# Add `libfdt` and Arm common helpers required for Dynamic Config
+include lib/libfdt/libfdt.mk
+
+DYN_CFG_SOURCES += plat/arm/common/arm_dyn_cfg.c \
+ plat/arm/common/arm_dyn_cfg_helpers.c \
+ common/fdt_wrappers.c
+
+BL1_SOURCES += ${DYN_CFG_SOURCES}
+BL2_SOURCES += ${DYN_CFG_SOURCES}
+
+ifeq (${BL2_AT_EL3},1)
+BL2_SOURCES += plat/arm/common/arm_bl2_el3_setup.c
+endif
+
+# Because BL1/BL2 execute in AArch64 mode but BL32 in AArch32 we need to use
+# the AArch32 descriptors.
+BL2_SOURCES += plat/arm/common/${ARCH}/arm_bl2_mem_params_desc.c
+BL2_SOURCES += plat/arm/common/arm_image_load.c \
+ common/desc_image_load.c
+
+ifeq (${SPD},opteed)
+BL2_SOURCES += lib/optee/optee_utils.c
+endif
+
+BL2U_SOURCES += drivers/delay_timer/delay_timer.c \
+ drivers/delay_timer/generic_delay_timer.c \
+ plat/arm/common/arm_bl2u_setup.c
+
+BL31_SOURCES += plat/arm/common/arm_bl31_setup.c \
+ plat/nuvoton/common/nuvoton_pm.c \
+ plat/nuvoton/common/nuvoton_topology.c \
+ plat/common/plat_psci_common.c
+
+ifeq (${ENABLE_PMF}, 1)
+ifeq (${ARCH}, aarch64)
+BL31_SOURCES += plat/arm/common/aarch64/execution_state_switch.c \
+ plat/arm/common/arm_sip_svc.c \
+ lib/pmf/pmf_smc.c
+else
+BL32_SOURCES += plat/arm/common/arm_sip_svc.c \
+ lib/pmf/pmf_smc.c
+endif
+endif
+
+ifeq (${EL3_EXCEPTION_HANDLING},1)
+BL31_SOURCES += plat/arm/common/aarch64/arm_ehf.c
+endif
+
+ifeq (${SDEI_SUPPORT},1)
+BL31_SOURCES += plat/arm/common/aarch64/arm_sdei.c
+ifeq (${SDEI_IN_FCONF},1)
+BL31_SOURCES += plat/arm/common/fconf/fconf_sdei_getter.c
+endif
+endif
+
+# RAS sources
+ifeq (${RAS_EXTENSION},1)
+BL31_SOURCES += lib/extensions/ras/std_err_record.c \
+ lib/extensions/ras/ras_common.c
+endif
+
+# Pointer Authentication sources
+ifeq (${ENABLE_PAUTH}, 1)
+PLAT_BL_COMMON_SOURCES += plat/arm/common/aarch64/arm_pauth.c \
+ lib/extensions/pauth/pauth_helpers.S
+endif
+
+ifeq (${SPD},spmd)
+BL31_SOURCES += plat/common/plat_spmd_manifest.c \
+ common/fdt_wrappers.c \
+ ${LIBFDT_SRCS}
+endif
+
+ifneq (${TRUSTED_BOARD_BOOT},0)
+# Include common TBB sources
+AUTH_SOURCES := drivers/auth/auth_mod.c \
+ drivers/auth/crypto_mod.c \
+ drivers/auth/img_parser_mod.c \
+ lib/fconf/fconf_tbbr_getter.c
+
+# Include the selected chain of trust sources.
+ifeq (${COT},tbbr)
+AUTH_SOURCES += drivers/auth/tbbr/tbbr_cot_common.c
+BL1_SOURCES += drivers/auth/tbbr/tbbr_cot_bl1.c
+BL2_SOURCES += drivers/auth/tbbr/tbbr_cot_bl2.c
+else ifeq (${COT},dualroot)
+AUTH_SOURCES += drivers/auth/dualroot/cot.c
+else
+$(error Unknown chain of trust ${COT})
+endif
+
+BL1_SOURCES += ${AUTH_SOURCES} \
+ bl1/tbbr/tbbr_img_desc.c \
+ plat/arm/common/arm_bl1_fwu.c \
+ plat/common/tbbr/plat_tbbr.c
+
+BL2_SOURCES += ${AUTH_SOURCES} \
+ plat/common/tbbr/plat_tbbr.c
+
+$(eval $(call TOOL_ADD_IMG,ns_bl2u,--fwu,FWU_))
+
+# We expect to locate the *.mk files under the directories specified below
+ifeq (${ARM_CRYPTOCELL_INTEG},0)
+CRYPTO_LIB_MK := drivers/auth/mbedtls/mbedtls_crypto.mk
+else
+CRYPTO_LIB_MK := drivers/auth/cryptocell/cryptocell_crypto.mk
+endif
+
+IMG_PARSER_LIB_MK := drivers/auth/mbedtls/mbedtls_x509.mk
+
+$(info Including ${CRYPTO_LIB_MK})
+include ${CRYPTO_LIB_MK}
+
+$(info Including ${IMG_PARSER_LIB_MK})
+include ${IMG_PARSER_LIB_MK}
+endif
+
+ifeq (${RECLAIM_INIT_CODE}, 1)
+ifeq (${ARM_XLAT_TABLES_LIB_V1}, 1)
+$(error "To reclaim init code xlat tables v2 must be used")
+endif
+endif
+
+ifeq (${MEASURED_BOOT},1)
+MEASURED_BOOT_MK := drivers/measured_boot/measured_boot.mk
+$(info Including ${MEASURED_BOOT_MK})
+include ${MEASURED_BOOT_MK}
+endif
+
+ifeq (${EL3_EXCEPTION_HANDLING},1)
+BL31_SOURCES += plat/arm/common/aarch64/arm_ehf.c
+endif
+
+BL1_SOURCES :=
+BL2_SOURCES :=
+BL2U_SOURCES :=
+
+DEBUG_CONSOLE ?= 0
+$(eval $(call add_define,DEBUG_CONSOLE))
+
+$(eval $(call add_define,ARM_TSP_RAM_LOCATION_ID))
+