feat(nuvoton): added support for npcm845x chip
Initial version
Signed-off-by: Margarita Glushkin <rutigl@gmail.com>
Change-Id: If433d325a90b519ae5f02411865bffd368ff2824
diff --git a/include/drivers/nuvoton/npcm845x/npcm845x_clock.h b/include/drivers/nuvoton/npcm845x/npcm845x_clock.h
new file mode 100644
index 0000000..3c457d7
--- /dev/null
+++ b/include/drivers/nuvoton/npcm845x/npcm845x_clock.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2017-2023 Nuvoton Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __ARBEL_CLOCK_H_
+#define __ARBEL_CLOCK_H_
+
+struct clk_ctl {
+ unsigned int clken1;
+ unsigned int clksel;
+ unsigned int clkdiv1;
+ unsigned int pllcon0;
+ unsigned int pllcon1;
+ unsigned int swrstr;
+ unsigned char res1[0x8];
+ unsigned int ipsrst1;
+ unsigned int ipsrst2;
+ unsigned int clken2;
+ unsigned int clkdiv2;
+ unsigned int clken3;
+ unsigned int ipsrst3;
+ unsigned int wd0rcr;
+ unsigned int wd1rcr;
+ unsigned int wd2rcr;
+ unsigned int swrstc1;
+ unsigned int swrstc2;
+ unsigned int swrstc3;
+ unsigned int tiprstc;
+ unsigned int pllcon2;
+ unsigned int clkdiv3;
+ unsigned int corstc;
+ unsigned int pllcong;
+ unsigned int ahbckfi;
+ unsigned int seccnt;
+ unsigned int cntr25m;
+ unsigned int clken4;
+ unsigned int ipsrst4;
+ unsigned int busto;
+ unsigned int clkdiv4;
+ unsigned int wd0rcrb;
+ unsigned int wd1rcrb;
+ unsigned int wd2rcrb;
+ unsigned int swrstc1b;
+ unsigned int swrstc2b;
+ unsigned int swrstc3b;
+ unsigned int tiprstcb;
+ unsigned int corstcb;
+ unsigned int ipsrstdis1;
+ unsigned int ipsrstdis2;
+ unsigned int ipsrstdis3;
+ unsigned int ipsrstdis4;
+ unsigned char res2[0x10];
+ unsigned int thrtl_cnt;
+};
+
+#endif /* __ARBEL_CLOCK_H_ */
diff --git a/include/drivers/nuvoton/npcm845x/npcm845x_gcr.h b/include/drivers/nuvoton/npcm845x/npcm845x_gcr.h
new file mode 100644
index 0000000..b9f3048
--- /dev/null
+++ b/include/drivers/nuvoton/npcm845x/npcm845x_gcr.h
@@ -0,0 +1,127 @@
+/*
+ * Copyright (C) 2022-2023 Nuvoton Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __NPCM845x_GCR_H_
+#define __NPCM845x_GCR_H_
+
+struct npcm845x_gcr {
+ unsigned int pdid;
+ unsigned int pwron;
+ unsigned int swstrps;
+ unsigned int rsvd1[2];
+ unsigned int miscpe;
+ unsigned int spldcnt;
+ unsigned int rsvd2[1];
+ unsigned int flockr2;
+ unsigned int flockr3;
+ unsigned int rsvd3[3];
+ unsigned int a35_mode;
+ unsigned int spswc;
+ unsigned int intcr;
+ unsigned int intsr;
+ unsigned int obscr1;
+ unsigned int obsdr1;
+ unsigned int rsvd4[1];
+ unsigned int hifcr;
+ unsigned int rsvd5[3];
+ unsigned int intcr2;
+ unsigned int rsvd6[1];
+ unsigned int srcnt;
+ unsigned int ressr;
+ unsigned int rlockr1;
+ unsigned int flockr1;
+ unsigned int dscnt;
+ unsigned int mdlr;
+ unsigned int scrpad_c;
+ unsigned int scrpad_b;
+ unsigned int rsvd7[4];
+ unsigned int daclvlr;
+ unsigned int intcr3;
+ unsigned int pcirctl;
+ unsigned int rsvd8[2];
+ unsigned int vsintr;
+ unsigned int rsvd9[1];
+ unsigned int sd2sur1;
+ unsigned int sd2sur2;
+ unsigned int sd2irv3;
+ unsigned int intcr4;
+ unsigned int obscr2;
+ unsigned int obsdr2;
+ unsigned int rsvd10[5];
+ unsigned int i2csegsel;
+ unsigned int i2csegctl;
+ unsigned int vsrcr;
+ unsigned int mlockr;
+ unsigned int rsvd11[8];
+ unsigned int etsr;
+ unsigned int dft1r;
+ unsigned int dft2r;
+ unsigned int dft3r;
+ unsigned int edffsr;
+ unsigned int rsvd12[1];
+ unsigned int intcrpce3;
+ unsigned int intcrpce2;
+ unsigned int intcrpce0;
+ unsigned int intcrpce1;
+ unsigned int dactest;
+ unsigned int scrpad;
+ unsigned int usb1phyctl;
+ unsigned int usb2phyctl;
+ unsigned int usb3phyctl;
+ unsigned int intsr2;
+ unsigned int intcrpce2b;
+ unsigned int intcrpce0b;
+ unsigned int intcrpce1b;
+ unsigned int intcrpce3b;
+ unsigned int rsvd13[4];
+ unsigned int intcrpce2c;
+ unsigned int intcrpce0c;
+ unsigned int intcrpce1c;
+ unsigned int intcrpce3c;
+ unsigned int rsvd14[40];
+ unsigned int sd2irv4;
+ unsigned int sd2irv5;
+ unsigned int sd2irv6;
+ unsigned int sd2irv7;
+ unsigned int sd2irv8;
+ unsigned int sd2irv9;
+ unsigned int sd2irv10;
+ unsigned int sd2irv11;
+ unsigned int rsvd15[8];
+ unsigned int mfsel1;
+ unsigned int mfsel2;
+ unsigned int mfsel3;
+ unsigned int mfsel4;
+ unsigned int mfsel5;
+ unsigned int mfsel6;
+ unsigned int mfsel7;
+ unsigned int rsvd16[1];
+ unsigned int mfsel_lk1;
+ unsigned int mfsel_lk2;
+ unsigned int mfsel_lk3;
+ unsigned int mfsel_lk4;
+ unsigned int mfsel_lk5;
+ unsigned int mfsel_lk6;
+ unsigned int mfsel_lk7;
+ unsigned int rsvd17[1];
+ unsigned int mfsel_set1;
+ unsigned int mfsel_set2;
+ unsigned int mfsel_set3;
+ unsigned int mfsel_set4;
+ unsigned int mfsel_set5;
+ unsigned int mfsel_set6;
+ unsigned int mfsel_set7;
+ unsigned int rsvd18[1];
+ unsigned int mfsel_clr1;
+ unsigned int mfsel_clr2;
+ unsigned int mfsel_clr3;
+ unsigned int mfsel_clr4;
+ unsigned int mfsel_clr5;
+ unsigned int mfsel_clr6;
+ unsigned int mfsel_clr7;
+};
+
+#endif
diff --git a/include/drivers/nuvoton/npcm845x/npcm845x_lpuart.h b/include/drivers/nuvoton/npcm845x/npcm845x_lpuart.h
new file mode 100644
index 0000000..8962b90
--- /dev/null
+++ b/include/drivers/nuvoton/npcm845x/npcm845x_lpuart.h
@@ -0,0 +1,230 @@
+/*
+ * Copyright (c) 2015-2023, ARM Limited and Contributors. All rights reserved.
+ *
+ * Copyright (C) 2022-2023 Nuvoton Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __ASM_ARCH_UART_H_
+#define __ASM_ARCH_UART_H_
+
+#ifndef __ASSEMBLY__
+
+struct npcmX50_uart {
+ union {
+ unsigned int rbr;
+ unsigned int thr;
+ unsigned int dll;
+ };
+ union {
+ unsigned int ier;
+ unsigned int dlm;
+ };
+ union {
+ unsigned int iir;
+ unsigned int fcr;
+ };
+ unsigned int lcr;
+ unsigned int mcr;
+ unsigned int lsr;
+ unsigned int msr;
+ unsigned int tor;
+};
+
+typedef enum {
+ /*
+ * UART0 is a general UART block without modem-I/O-control
+ * connection to external signals.
+ */
+ UART0_DEV = 0,
+ /*
+ * UART1-3 are each a general UART with modem-I/O-control
+ * connection to external signals.
+ */
+ UART1_DEV,
+ UART2_DEV,
+ UART3_DEV,
+} UART_DEV_T;
+
+typedef enum {
+ /*
+ * 0 0 0: Mode 1:
+ * HSP1 connected to SI2,
+ * HSP2 connected to UART2,
+ * UART1 snoops HSP1,
+ * UART3 snoops SI2
+ */
+ UART_MUX_MODE1 = 0,
+ /*
+ * 0 0 1: Mode 2:
+ * HSP1 connected to UART1,
+ * HSP2 connected to SI2,
+ * UART2 snoops HSP2,
+ * UART3 snoops SI2
+ */
+ UART_MUX_MODE2,
+ /*
+ * 0 1 0: Mode 3:
+ * HSP1 connected to UART1,
+ * HSP2 connected to UART2,
+ * UART3 connected to SI2
+ */
+ UART_MUX_MODE3,
+ /*
+ * 0 1 1: Mode 4:
+ * HSP1 connected to SI1,
+ * HSP2 connected to SI2,
+ * UART1 snoops SI1,
+ * UART3 snoops SI2,
+ * UART2 snoops HSP1 (default)
+ */
+ UART_MUX_MODE4,
+ /*
+ * 1 0 0: Mode 5:
+ * HSP1 connected to SI1,
+ * HSP2 connected to UART2,
+ * UART1 snoops HSP1,
+ * UART3 snoops SI1
+ */
+ UART_MUX_MODE5,
+ /*
+ * 1 0 1: Mode 6:
+ * HSP1 connected to SI1,
+ * HSP2 connected to SI2,
+ * UART1 snoops SI1,
+ * UART3 snoops SI2,
+ * UART2 snoops HSP2
+ */
+ UART_MUX_MODE6,
+ /*
+ * 1 1 0: Mode 7:
+ * HSP1 connected to SI1,
+ * HSP2 connected to UART2,
+ * UART1 snoops HSP1,
+ * UART3 connected to SI2
+ */
+ UART_MUX_MODE7,
+ /* Skip UART mode configuration. */
+ UART_MUX_RESERVED,
+ /*
+ * A SW option to allow config of UART
+ * without touching the UART mux.
+ */
+ UART_MUX_SKIP_CONFIG
+} UART_MUX_T;
+
+/*---------------------------------------------------------------------------*/
+/* Common baudrate definitions */
+/*---------------------------------------------------------------------------*/
+typedef enum {
+ UART_BAUDRATE_110 = 110,
+ UART_BAUDRATE_300 = 300,
+ UART_BAUDRATE_600 = 600,
+ UART_BAUDRATE_1200 = 1200,
+ UART_BAUDRATE_2400 = 2400,
+ UART_BAUDRATE_4800 = 4800,
+ UART_BAUDRATE_9600 = 9600,
+ UART_BAUDRATE_14400 = 14400,
+ UART_BAUDRATE_19200 = 19200,
+ UART_BAUDRATE_38400 = 38400,
+ UART_BAUDRATE_57600 = 57600,
+ UART_BAUDRATE_115200 = 115200,
+ UART_BAUDRATE_230400 = 230400,
+ UART_BAUDRATE_380400 = 380400,
+ UART_BAUDRATE_460800 = 460800,
+} UART_BAUDRATE_T;
+
+/*---------------------------------------------------------------------------*/
+/* UART parity types */
+/*---------------------------------------------------------------------------*/
+typedef enum {
+ UART_PARITY_NONE = 0,
+ UART_PARITY_EVEN,
+ UART_PARITY_ODD,
+} UART_PARITY_T;
+
+/*---------------------------------------------------------------------------*/
+/* Uart stop bits */
+/*---------------------------------------------------------------------------*/
+typedef enum {
+ UART_STOPBIT_1 = 0x00,
+ UART_STOPBIT_DYNAMIC,
+} UART_STOPBIT_T;
+
+enum FCR_RFITL_TYPE {
+ FCR_RFITL_1B = 0x0,
+ FCR_RFITL_4B = 0x4,
+ FCR_RFITL_8B = 0x8,
+ FCR_RFITL_14B = 0xC,
+};
+
+enum LCR_WLS_TYPE {
+ LCR_WLS_5bit = 0x0,
+ LCR_WLS_6bit = 0x1,
+ LCR_WLS_7bit = 0x2,
+ LCR_WLS_8bit = 0x3,
+};
+
+#define IER_DBGACK (1 << 4)
+#define IER_MSIE (1 << 3)
+#define IER_RLSE (1 << 2)
+#define IER_THREIE (1 << 1)
+#define IER_RDAIE (1 << 0)
+
+#define IIR_FMES (1 << 7)
+#define IIR_RFTLS (1 << 5)
+#define IIR_DMS (1 << 4)
+#define IIR_IID (1 << 1)
+#define IIR_NIP (1 << 0)
+
+#define FCR_RFITL_1B (0 << 4)
+#define FCR_RFITL_4B (4 << 4)
+#define FCR_RFITL_8B (8 << 4)
+#define FCR_RFITL_14B (12 << 4)
+#define FCR_DMS (1 << 3)
+#define FCR_TFR (1 << 2)
+#define FCR_RFR (1 << 1)
+#define FCR_FME (1 << 0)
+
+#define LCR_DLAB (1 << 7)
+#define LCR_BCB (1 << 6)
+#define LCR_SPE (1 << 5)
+#define LCR_EPS (1 << 4)
+#define LCR_PBE (1 << 3)
+#define LCR_NSB (1 << 2)
+#define LCR_WLS_8b (3 << 0)
+#define LCR_WLS_7b (2 << 0)
+#define LCR_WLS_6b (1 << 0)
+#define LCR_WLS_5b (0 << 0)
+
+#define MCR_LBME (1 << 4)
+#define MCR_OUT2 (1 << 3)
+#define MCR_RTS (1 << 1)
+#define MCR_DTR (1 << 0)
+
+#define LSR_ERR_RX (1 << 7)
+#define LSR_TE (1 << 6)
+#define LSR_THRE (1 << 5)
+#define LSR_BII (1 << 4)
+#define LSR_FEI (1 << 3)
+#define LSR_PEI (1 << 2)
+#define LSR_OEI (1 << 1)
+#define LSR_RFDR (1 << 0)
+
+#define MSR_DCD (1 << 7)
+#define MSR_RI (1 << 6)
+#define MSR_DSR (1 << 5)
+#define MSR_CTS (1 << 4)
+#define MSR_DDCD (1 << 3)
+#define MSR_DRI (1 << 2)
+#define MSR_DDSR (1 << 1)
+#define MSR_DCTS (1 << 0)
+
+#endif /* __ASSEMBLY__ */
+
+uintptr_t npcm845x_get_base_uart(UART_DEV_T dev);
+void CLK_ResetUART(void);
+int UART_Init(UART_DEV_T devNum, UART_BAUDRATE_T baudRate);
+
+#endif /* __ASM_ARCH_UART_H_ */
diff --git a/include/plat/nuvoton/common/npcm845x_arm_def.h b/include/plat/nuvoton/common/npcm845x_arm_def.h
new file mode 100644
index 0000000..faddb88
--- /dev/null
+++ b/include/plat/nuvoton/common/npcm845x_arm_def.h
@@ -0,0 +1,576 @@
+/*
+ * Copyright (c) 2015-2023, ARM Limited and Contributors. All rights reserved.
+ *
+ * Copyright (C) 2017-2023 Nuvoton Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef NPCM845x_ARM_DEF_H
+#define NPCM845x_ARM_DEF_H
+
+#include <arch.h>
+#include <common/interrupt_props.h>
+#include <common/tbbr/tbbr_img_def.h>
+#include <drivers/arm/gic_common.h>
+#include <lib/utils_def.h>
+#include <lib/xlat_tables/xlat_tables_defs.h>
+#include <plat/arm/common/smccc_def.h>
+#include <plat/common/common_def.h>
+
+/* This flag will add zones to the MMU so that it will be possible to debug */
+#ifdef NPCM845X_DEBUG
+#define ALLOW_DEBUG_MMU
+#undef ALLOW_DEBUG_MMU
+#endif /* NPCM845X_DEBUG */
+
+#undef CONFIG_TARGET_ARBEL_PALLADIUM
+/******************************************************************************
+ * Definitions common to all ARM standard platforms
+ *****************************************************************************/
+
+/*
+ * Root of trust key hash lengths
+ */
+#define ARM_ROTPK_HEADER_LEN 19
+#define ARM_ROTPK_HASH_LEN 32
+
+/* Special value used to verify platform parameters from BL2 to BL31 */
+#define ARM_BL31_PLAT_PARAM_VAL ULL(0x0f1e2d3c4b5a6978)
+
+/* No need for system because we have only one cluster */
+#define ARM_SYSTEM_COUNT U(0)
+
+#define ARM_CACHE_WRITEBACK_SHIFT 6
+
+/*
+ * Macros mapping the MPIDR Affinity levels to ARM Platform Power levels.
+ * The power levels have a 1:1 mapping with the MPIDR affinity levels.
+ */
+/* In NPCM845x - refers to cores */
+#define ARM_PWR_LVL0 MPIDR_AFFLVL0
+
+/* In NPCM845x - refers to cluster */
+#define ARM_PWR_LVL1 MPIDR_AFFLVL1
+
+/* No need for additional settings because the platform doesn't have system */
+
+/*
+ * Macros for local power states in ARM platforms encoded by State-ID field
+ * within the power-state parameter.
+ */
+#define NPCM845x_PLAT_PRIMARY_CPU U(0x0)
+#define NPCM845x_CLUSTER_COUNT U(1)
+
+#ifdef SECONDARY_BRINGUP
+#define NPCM845x_MAX_CPU_PER_CLUSTER U(2)
+#define NPCM845x_PLATFORM_CORE_COUNT U(2)
+#define NPCM845x_PLATFORM_CLUSTER0_CORE_COUNT U(2)
+#else
+#define NPCM845x_MAX_CPU_PER_CLUSTER U(4)
+#define NPCM845x_PLATFORM_CORE_COUNT U(4)
+#define NPCM845x_PLATFORM_CLUSTER0_CORE_COUNT U(4)
+#endif /* SECONDARY_BRINGUP */
+
+#define NPCM845x_SYSTEM_COUNT U(0)
+
+/* Memory mapping for NPCM845x */
+#define NPCM845x_REG_BASE 0xf0000000
+#define NPCM845x_REG_SIZE 0x0ff16000
+
+/*
+ * DRAM
+ * 0x3fffffff +-------------+
+ * | BL33 | (non-secure)
+ * 0x06200000 +-------------+
+ * | BL32 SHARED | (non-secure)
+ * 0x06000000 +-------------+
+ * | BL32 | (secure)
+ * 0x02100000 +-------------+
+ * | BL31 | (secure)
+ * 0x02000000 +-------------+
+ * | | (non-secure)
+ * 0x00000000 +-------------+
+ *
+ * Trusted ROM
+ * 0xfff50000 +-------------+
+ * | BL1 (ro) |
+ * 0xfff40000 +-------------+
+ */
+
+#define ARM_DRAM1_BASE ULL(0x00000000)
+#ifndef CONFIG_TARGET_ARBEL_PALLADIUM
+/*
+ * Although npcm845x is 4G,
+ * consider only 2G Trusted Firmware memory allocation
+ */
+#define ARM_DRAM1_SIZE ULL(0x37000000)
+#else
+#define ARM_DRAM1_SIZE ULL(0x10000000)
+#define ARM_DRAM1_END (ARM_DRAM1_BASE + ARM_DRAM1_SIZE - 1U)
+#endif /* CONFIG_TARGET_ARBEL_PALLADIUM */
+
+/*
+ * The top 16MB of DRAM1 is configured as secure access only using the TZC
+ * - SCP TZC DRAM: If present, DRAM reserved for SCP use
+ * - AP TZC DRAM: The remaining TZC secured DRAM reserved for AP use
+ */
+
+/* Check for redundancy */
+#ifdef NPCM845X_DEBUG
+#define PLAT_ARM_NS_IMAGE_BASE 0x0
+#endif /* NPCM845X_DEBUG */
+
+#define ARM_TZC_DRAM1_SIZE UL(0x01000000)
+#define ARM_SCP_TZC_DRAM1_SIZE PLAT_ARM_SCP_TZC_DRAM1_SIZE
+#define ARM_SCP_TZC_DRAM1_END (ARM_SCP_TZC_DRAM1_BASE + \
+ ARM_SCP_TZC_DRAM1_SIZE - 1U)
+
+/*
+ * Define a 2MB region within the TZC secured DRAM for use by EL3 runtime
+ * firmware. This region is meant to be NOLOAD and will not be zero
+ * initialized. Data sections with the attribute `arm_el3_tzc_dram`
+ * will be placed here.
+ *
+ * NPCM845x - Currently the platform doesn't have EL3 implementation
+ * on secured DRAM.
+ */
+#define ARM_EL3_TZC_DRAM1_BASE (ARM_SCP_TZC_DRAM1_BASE - \
+ ARM_EL3_TZC_DRAM1_SIZE)
+#define ARM_EL3_TZC_DRAM1_SIZE UL(0x00200000) /* 2 MB */
+#define ARM_EL3_TZC_DRAM1_END (ARM_EL3_TZC_DRAM1_BASE + \
+ ARM_EL3_TZC_DRAM1_SIZE - 1U)
+
+#define ARM_AP_TZC_DRAM1_BASE 0x02100000
+#define ARM_AP_TZC_DRAM1_SIZE (ARM_TZC_DRAM1_SIZE - \
+ (ARM_SCP_TZC_DRAM1_SIZE + \
+ ARM_EL3_TZC_DRAM1_SIZE))
+#define ARM_AP_TZC_DRAM1_END (ARM_AP_TZC_DRAM1_BASE + \
+ ARM_AP_TZC_DRAM1_SIZE - 1U)
+
+/* Define the Access permissions for Secure peripherals to NS_DRAM */
+#if ARM_CRYPTOCELL_INTEG
+/*
+ * Allow Secure peripheral to read NS DRAM when integrated with CryptoCell.
+ * This is required by CryptoCell to authenticate BL33 which is loaded
+ * into the Non Secure DDR.
+ */
+#define ARM_TZC_NS_DRAM_S_ACCESS TZC_REGION_S_RD
+#else
+#define ARM_TZC_NS_DRAM_S_ACCESS TZC_REGION_S_NONE
+#endif /* ARM_CRYPTOCELL_INTEG */
+
+#ifdef SPD_opteed
+/*
+ * BL2 needs to map 4MB at the end of TZC_DRAM1 in order to
+ * load/authenticate the trusted os extra image. The first 512KB of
+ * TZC_DRAM1 are reserved for trusted os (OPTEE). The extra image loading
+ * for OPTEE is paged image which only include the paging part using
+ * virtual memory but without "init" data. OPTEE will copy the "init" data
+ * (from pager image) to the first 512KB of TZC_DRAM, and then copy the
+ * extra image behind the "init" data.
+ */
+#define TSP_SEC_MEM_BASE ARM_AP_TZC_DRAM1_BASE
+#define TSP_SEC_MEM_SIZE ARM_AP_TZC_DRAM1_SIZE
+#define BL32_BASE ARM_AP_TZC_DRAM1_BASE
+#define BL32_LIMIT (ARM_AP_TZC_DRAM1_BASE + \
+ ARM_AP_TZC_DRAM1_SIZE)
+
+#define ARM_OPTEE_PAGEABLE_LOAD_BASE ( \
+ ARM_AP_TZC_DRAM1_BASE + ARM_AP_TZC_DRAM1_SIZE - \
+ ARM_OPTEE_PAGEABLE_LOAD_SIZE)
+#define ARM_OPTEE_PAGEABLE_LOAD_SIZE UL(0x400000)
+#define ARM_OPTEE_PAGEABLE_LOAD_MEM MAP_REGION_FLAT( \
+ ARM_OPTEE_PAGEABLE_LOAD_BASE, \
+ ARM_OPTEE_PAGEABLE_LOAD_SIZE, \
+ MT_MEMORY | MT_RW | MT_SECURE)
+
+/*
+ * Map the memory for the OP-TEE core (also known as OP-TEE pager
+ * when paging support is enabled).
+ */
+#define ARM_MAP_OPTEE_CORE_MEM MAP_REGION_FLAT( \
+ BL32_BASE, BL32_LIMIT - BL32_BASE, \
+ MT_MEMORY | MT_RW | MT_SECURE)
+#endif /* SPD_opteed */
+
+#define ARM_NS_DRAM1_BASE ARM_DRAM1_BASE
+#define ARM_NS_DRAM1_SIZE (ARM_DRAM1_SIZE - \
+ ARM_TZC_DRAM1_SIZE)
+#define ARM_NS_DRAM1_END (ARM_NS_DRAM1_BASE + \
+ ARM_NS_DRAM1_SIZE - 1U)
+
+/* The platform doesn't use DRAM2 but it has to have a value for calculation */
+#define ARM_DRAM2_BASE 0 /* PLAT_ARM_DRAM_BASE */
+#define ARM_DRAM2_SIZE 1 /* PLAT_ARM_DRAM_SIZE */
+#define ARM_DRAM2_END (ARM_DRAM2_BASE + ARM_DRAM2_SIZE - 1U)
+
+#define FIRST_EXT_INTERRUPT_NUM U(32)
+#define ARM_IRQ_SEC_PHY_TIMER (U(29) + FIRST_EXT_INTERRUPT_NUM)
+
+#define ARM_IRQ_SEC_SGI_0 8
+#define ARM_IRQ_SEC_SGI_1 9
+#define ARM_IRQ_SEC_SGI_2 10
+#define ARM_IRQ_SEC_SGI_3 11
+#define ARM_IRQ_SEC_SGI_4 12
+#define ARM_IRQ_SEC_SGI_5 13
+#define ARM_IRQ_SEC_SGI_6 14
+#define ARM_IRQ_SEC_SGI_7 15
+
+/*
+ * Define a list of Group 1 Secure and Group 0 interrupt properties
+ * as per GICv3 terminology. On a GICv2 system or mode,
+ * the lists will be merged and treated as Group 0 interrupts.
+ */
+#define ARM_G1S_IRQ_PROPS(grp) \
+ INTR_PROP_DESC(ARM_IRQ_SEC_PHY_TIMER, \
+ GIC_HIGHEST_SEC_PRIORITY, (grp), GIC_INTR_CFG_LEVEL), \
+ INTR_PROP_DESC(ARM_IRQ_SEC_SGI_1, \
+ GIC_HIGHEST_SEC_PRIORITY, (grp), GIC_INTR_CFG_EDGE), \
+ INTR_PROP_DESC(ARM_IRQ_SEC_SGI_2, \
+ GIC_HIGHEST_SEC_PRIORITY, (grp), GIC_INTR_CFG_EDGE), \
+ INTR_PROP_DESC(ARM_IRQ_SEC_SGI_3, \
+ GIC_HIGHEST_SEC_PRIORITY, (grp), GIC_INTR_CFG_EDGE), \
+ INTR_PROP_DESC(ARM_IRQ_SEC_SGI_4, \
+ GIC_HIGHEST_SEC_PRIORITY, (grp), GIC_INTR_CFG_EDGE), \
+ INTR_PROP_DESC(ARM_IRQ_SEC_SGI_5, \
+ GIC_HIGHEST_SEC_PRIORITY, (grp), GIC_INTR_CFG_EDGE), \
+ INTR_PROP_DESC(ARM_IRQ_SEC_SGI_7, \
+ GIC_HIGHEST_SEC_PRIORITY, (grp), GIC_INTR_CFG_EDGE)
+
+#define ARM_G0_IRQ_PROPS(grp) \
+ INTR_PROP_DESC(ARM_IRQ_SEC_SGI_0, \
+ PLAT_SDEI_NORMAL_PRI, (grp), GIC_INTR_CFG_EDGE), \
+ INTR_PROP_DESC(ARM_IRQ_SEC_SGI_6, \
+ GIC_HIGHEST_SEC_PRIORITY, (grp), GIC_INTR_CFG_EDGE)
+
+#define ARM_MAP_SHARED_RAM MAP_REGION_FLAT( \
+ ARM_SHARED_RAM_BASE, ARM_SHARED_RAM_SIZE, \
+ MT_DEVICE | MT_RW | MT_SECURE)
+
+#ifdef ALLOW_DEBUG_MMU
+/* In order to be able to debug,
+ * the platform needs to add BL33 and BL32 to MMU as well.
+ */
+#define ARM_MAP_NS_DRAM1 MAP_REGION_FLAT( \
+ ARM_NS_DRAM1_BASE, ARM_NS_DRAM1_SIZE, \
+ MT_MEMORY | MT_RW | MT_NS)
+
+#ifdef BL32_BASE
+#define ARM_MAP_BL32_CORE_MEM MAP_REGION_FLAT( \
+ BL32_BASE, BL32_LIMIT - BL32_BASE, \
+ MT_MEMORY | MT_RW | MT_SECURE)
+#endif /* BL32_BASE */
+
+#ifdef NPCM845X_DEBUG
+#define ARM_MAP_SEC_BB_MEM MAP_REGION_FLAT( \
+ 0xFFFB0000, 0x20000, \
+ MT_MEMORY | MT_RW | MT_NS)
+#endif /* NPCM845X_DEBUG */
+#endif /* BL32_BASE */
+
+#define ARM_MAP_DRAM2 MAP_REGION_FLAT( \
+ ARM_DRAM2_BASE, ARM_DRAM2_SIZE, \
+ MT_MEMORY | MT_RW | MT_NS)
+
+#define ARM_MAP_TSP_SEC_MEM MAP_REGION_FLAT( \
+ TSP_SEC_MEM_BASE, TSP_SEC_MEM_SIZE, \
+ MT_MEMORY | MT_RW | MT_SECURE)
+
+#if ARM_BL31_IN_DRAM
+#define ARM_MAP_BL31_SEC_DRAM MAP_REGION_FLAT( \
+ BL31_BASE, PLAT_ARM_MAX_BL31_SIZE, \
+ MT_MEMORY | MT_RW | MT_SECURE)
+#endif /* ARM_BL31_IN_DRAM */
+
+/* Currently the platform doesn't have EL3 implementation on secured DRAM. */
+#define ARM_MAP_EL3_TZC_DRAM MAP_REGION_FLAT( \
+ ARM_EL3_TZC_DRAM1_BASE, \
+ ARM_EL3_TZC_DRAM1_SIZE, \
+ MT_MEMORY | MT_RW | MT_SECURE)
+
+#if defined(SPD_spmd)
+#define ARM_MAP_TRUSTED_DRAM MAP_REGION_FLAT( \
+ PLAT_ARM_TRUSTED_DRAM_BASE, \
+ PLAT_ARM_TRUSTED_DRAM_SIZE, \
+ MT_MEMORY | MT_RW | MT_SECURE)
+#endif /* SPD_spmd */
+
+/*
+ * Mapping for the BL1 RW region. This mapping is needed by BL2
+ * in order to share the Mbed TLS heap. Since the heap is allocated
+ * inside BL1, it resides in the BL1 RW region. Hence, BL2 needs access
+ * to the BL1 RW region in order to be able to access the heap.
+ */
+#define ARM_MAP_BL1_RW MAP_REGION_FLAT( \
+ BL1_RW_BASE, BL1_RW_LIMIT - BL1_RW_BASE, \
+ MT_MEMORY | MT_RW | EL3_PAS)
+
+/*
+ * If SEPARATE_CODE_AND_RODATA=1 the platform will define a region
+ * for each section, otherwise one region containing both sections
+ * is defined.
+ */
+#if SEPARATE_CODE_AND_RODATA
+#define ARM_MAP_BL_RO MAP_REGION_FLAT( \
+ BL_CODE_BASE, BL_CODE_END - BL_CODE_BASE, \
+ MT_CODE | EL3_PAS), \
+ MAP_REGION_FLAT(BL_RO_DATA_BASE, \
+ BL_RO_DATA_END - BL_RO_DATA_BASE, \
+ MT_RO_DATA | EL3_PAS)
+#else
+#define ARM_MAP_BL_RO MAP_REGION_FLAT( \
+ BL_CODE_BASE, BL_CODE_END - BL_CODE_BASE, \
+ MT_CODE | EL3_PAS)
+#endif /* SEPARATE_CODE_AND_RODATA */
+
+#if USE_COHERENT_MEM
+#define ARM_MAP_BL_COHERENT_RAM MAP_REGION_FLAT( \
+ BL_COHERENT_RAM_BASE, \
+ BL_COHERENT_RAM_END - BL_COHERENT_RAM_BASE, \
+ MT_DEVICE | MT_RW | EL3_PAS)
+#endif /* USE_COHERENT_MEM */
+
+#if USE_ROMLIB
+#define ARM_MAP_ROMLIB_CODE MAP_REGION_FLAT( \
+ ROMLIB_RO_BASE, \
+ ROMLIB_RO_LIMIT - ROMLIB_RO_BASE, \
+ MT_CODE | MT_SECURE)
+
+#define ARM_MAP_ROMLIB_DATA MAP_REGION_FLAT( \
+ ROMLIB_RW_BASE, \
+ ROMLIB_RW_END - ROMLIB_RW_BASE, \
+ MT_MEMORY | MT_RW | MT_SECURE)
+#endif /* USE_ROMLIB */
+
+/*
+ * Map mem_protect flash region with read and write permissions
+ */
+#define ARM_V2M_MAP_MEM_PROTECT MAP_REGION_FLAT( \
+ PLAT_ARM_MEM_PROT_ADDR, \
+ V2M_FLASH_BLOCK_SIZE, \
+ MT_DEVICE | MT_RW | MT_SECURE)
+/*
+ * Map the region for device tree configuration with read and write permissions
+ */
+#define ARM_MAP_BL_CONFIG_REGION MAP_REGION_FLAT( \
+ ARM_BL_RAM_BASE, \
+ (ARM_FW_CONFIGS_LIMIT - ARM_BL_RAM_BASE), \
+ MT_MEMORY | MT_RW | MT_SECURE)
+
+/*
+ * The max number of regions like RO(code), coherent and data required by
+ * different BL stages which need to be mapped in the MMU.
+ */
+#define ARM_BL_REGIONS 10
+
+#define MAX_MMAP_REGIONS ( \
+ PLAT_ARM_MMAP_ENTRIES + ARM_BL_REGIONS)
+
+/* Memory mapped Generic timer interfaces */
+#define ARM_SYS_CNTCTL_BASE UL(0XF07FC000)
+
+#define ARM_CONSOLE_BAUDRATE 115200
+
+/*
+ * The TBBR document specifies a watchdog timeout of 256 seconds. SP805
+ * asserts reset after two consecutive countdowns (2 x 128 = 256 sec)
+ */
+#define ARM_TWDG_TIMEOUT_SEC 128
+#define ARM_TWDG_LOAD_VAL (ARM_SP805_TWDG_CLK_HZ * \
+ ARM_TWDG_TIMEOUT_SEC)
+
+/******************************************************************************
+ * Required platform porting definitions common to all ARM standard platforms
+ *****************************************************************************/
+
+/*
+ * Some data must be aligned on the biggest cache line size in the platform.
+ * This is known only to the platform as it might have a combination of
+ * integrated and external caches (64 on Arbel).
+ */
+#define CACHE_WRITEBACK_GRANULE (U(1) << ARM_CACHE_WRITEBACK_SHIFT)
+
+/*
+ * To enable FW_CONFIG to be loaded by BL1, define the corresponding base
+ * and limit. Leave enough space of BL2 meminfo.
+ */
+#define ARM_FW_CONFIG_BASE (ARM_BL_RAM_BASE + sizeof(meminfo_t))
+#define ARM_FW_CONFIG_LIMIT ( \
+ (ARM_BL_RAM_BASE + PAGE_SIZE) + (PAGE_SIZE / 2U))
+
+/*
+ * Boot parameters passed from BL2 to BL31/BL32 are stored here
+ */
+#define ARM_BL2_MEM_DESC_BASE (ARM_FW_CONFIG_LIMIT)
+#define ARM_BL2_MEM_DESC_LIMIT ( \
+ ARM_BL2_MEM_DESC_BASE + (PAGE_SIZE / 2U))
+
+/*
+ * Define limit of firmware configuration memory:
+ * ARM_FW_CONFIG + ARM_BL2_MEM_DESC memory
+ */
+#define ARM_FW_CONFIGS_LIMIT (ARM_BL_RAM_BASE + (PAGE_SIZE * 2))
+
+/*******************************************************************************
+ * BL1 specific defines.
+ * BL1 RW data is relocated from ROM to RAM at runtime so we need
+ * two sets of addresses.
+ ******************************************************************************/
+#define BL1_RO_BASE PLAT_ARM_TRUSTED_ROM_BASE
+#define BL1_RO_LIMIT (PLAT_ARM_TRUSTED_ROM_BASE + \
+ (PLAT_ARM_TRUSTED_ROM_SIZE - PLAT_ARM_MAX_ROMLIB_RO_SIZE))
+/*
+ * Put BL1 RW at the top of the Trusted SRAM.
+ */
+#define BL1_RW_BASE (ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE - \
+ (PLAT_ARM_MAX_BL1_RW_SIZE + PLAT_ARM_MAX_ROMLIB_RW_SIZE))
+#define BL1_RW_LIMIT (ARM_BL_RAM_BASE + \
+ (ARM_BL_RAM_SIZE - PLAT_ARM_MAX_ROMLIB_RW_SIZE))
+
+#define ROMLIB_RO_BASE BL1_RO_LIMIT
+#define ROMLIB_RO_LIMIT ( \
+ PLAT_ARM_TRUSTED_ROM_BASE + PLAT_ARM_TRUSTED_ROM_SIZE)
+
+#define ROMLIB_RW_BASE (BL1_RW_BASE + PLAT_ARM_MAX_BL1_RW_SIZE)
+#define ROMLIB_RW_END ( \
+ ROMLIB_RW_BASE + PLAT_ARM_MAX_ROMLIB_RW_SIZE)
+
+/******************************************************************************
+ * BL2 specific defines.
+ *****************************************************************************/
+#if BL2_AT_EL3
+/* Put BL2 towards the middle of the Trusted SRAM */
+#define BL2_BASE (ARM_TRUSTED_SRAM_BASE + \
+ PLAT_ARM_TRUSTED_SRAM_SIZE >> 1) + 0x2000)
+#define BL2_LIMIT (ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE)
+#else
+/*
+ * Put BL2 just below BL1.
+ */
+#define BL2_BASE (BL1_RW_BASE - PLAT_ARM_MAX_BL2_SIZE)
+#define BL2_LIMIT BL1_RW_BASE
+#endif /* BL2_AT_EL3 */
+
+/*******************************************************************************
+ * BL31 specific defines.
+ ******************************************************************************/
+#if ARM_BL31_IN_DRAM || SEPARATE_NOBITS_REGION
+/*
+ * Put BL31 at the bottom of TZC secured DRAM
+ */
+#define BL31_BASE ARM_AP_TZC_DRAM1_BASE
+#define BL31_LIMIT ( \
+ ARM_AP_TZC_DRAM1_BASE + PLAT_ARM_MAX_BL31_SIZE)
+
+/*
+ * For SEPARATE_NOBITS_REGION, BL31 PROGBITS are loaded in TZC secured DRAM.
+ * And BL31 NOBITS are loaded in Trusted SRAM such that BL2 is overwritten.
+ */
+#if SEPARATE_NOBITS_REGION
+#define BL31_NOBITS_BASE BL2_BASE
+#define BL31_NOBITS_LIMIT BL2_LIMIT
+#endif /* SEPARATE_NOBITS_REGION */
+#elif (RESET_TO_BL31)
+/* Ensure Position Independent support (PIE) is enabled for this config.*/
+#if !ENABLE_PIE
+#error "BL31 must be a PIE if RESET_TO_BL31=1."
+#endif /* !ENABLE_PIE */
+/*
+ * Since this is PIE, we can define BL31_BASE to 0x0 since this macro is solely
+ * used for building BL31 and not used for loading BL31.
+ */
+#define NEW_SRAM_ALLOCATION
+
+#ifdef NEW_SRAM_ALLOCATION
+ #define BL31_BASE 0x20001000
+#else
+ #define BL31_BASE 0x20001000
+#endif /* NEW_SRAM_ALLOCATION */
+
+#define BL31_LIMIT BL2_BASE /* PLAT_ARM_MAX_BL31_SIZE */
+#else
+/* Put BL31 below BL2 in the Trusted SRAM.*/
+#define BL31_BASE ((ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE) - \
+ PLAT_ARM_MAX_BL31_SIZE)
+#define BL31_PROGBITS_LIMIT BL2_BASE
+
+/*
+ * For BL2_AT_EL3 make sure the BL31 can grow up until BL2_BASE.
+ * This is because in the BL2_AT_EL3 configuration, BL2 is always resident.
+ */
+#if BL2_AT_EL3
+#define BL31_LIMIT BL2_BASE
+#else
+#define BL31_LIMIT (ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE)
+#endif /* BL2_AT_EL3 */
+#endif /* ARM_BL31_IN_DRAM || SEPARATE_NOBITS_REGION */
+
+/*
+ * BL32 is mandatory in AArch32. In AArch64, undefine BL32_BASE if there is
+ * no SPD and no SPM-MM, as they are the only ones that can be used as BL32.
+ */
+#if defined(SPD_none) && !SPM_MM
+#undef BL32_BASE
+#endif /* SPD_none && !SPM_MM */
+
+/******************************************************************************
+ * FWU Images: NS_BL1U, BL2U & NS_BL2U defines.
+ *****************************************************************************/
+#define BL2U_BASE BL2_BASE
+#define BL2U_LIMIT BL2_LIMIT
+
+#define NS_BL2U_BASE ARM_NS_DRAM1_BASE
+#define NS_BL1U_BASE (PLAT_ARM_NVM_BASE + UL(0x03EB8000))
+
+/*
+ * ID of the secure physical generic timer interrupt used by the TSP.
+ */
+#define TSP_IRQ_SEC_PHY_TIMER ARM_IRQ_SEC_PHY_TIMER
+
+/*
+ * One cache line needed for bakery locks on ARM platforms
+ */
+#define PLAT_PERCPU_BAKERY_LOCK_SIZE (1 * CACHE_WRITEBACK_GRANULE)
+
+/* Priority levels for ARM platforms */
+#define PLAT_RAS_PRI 0x10
+#define PLAT_SDEI_CRITICAL_PRI 0x60
+#define PLAT_SDEI_NORMAL_PRI 0x70
+
+/* ARM platforms use 3 upper bits of secure interrupt priority */
+#define ARM_PRI_BITS 3
+
+/* SGI used for SDEI signalling */
+#define ARM_SDEI_SGI ARM_IRQ_SEC_SGI_0
+
+#if SDEI_IN_FCONF
+/* ARM SDEI dynamic private event max count */
+#define ARM_SDEI_DP_EVENT_MAX_CNT 3
+
+/* ARM SDEI dynamic shared event max count */
+#define ARM_SDEI_DS_EVENT_MAX_CNT 3
+#else
+/* ARM SDEI dynamic private event numbers */
+#define ARM_SDEI_DP_EVENT_0 1000
+#define ARM_SDEI_DP_EVENT_1 1001
+#define ARM_SDEI_DP_EVENT_2 1002
+
+/* ARM SDEI dynamic shared event numbers */
+#define ARM_SDEI_DS_EVENT_0 2000
+#define ARM_SDEI_DS_EVENT_1 2001
+#define ARM_SDEI_DS_EVENT_2 2002
+
+#define ARM_SDEI_PRIVATE_EVENTS \
+ SDEI_DEFINE_EVENT_0(ARM_SDEI_SGI), \
+ SDEI_PRIVATE_EVENT(ARM_SDEI_DP_EVENT_0, SDEI_DYN_IRQ, SDEI_MAPF_DYNAMIC), \
+ SDEI_PRIVATE_EVENT(ARM_SDEI_DP_EVENT_1, SDEI_DYN_IRQ, SDEI_MAPF_DYNAMIC), \
+ SDEI_PRIVATE_EVENT(ARM_SDEI_DP_EVENT_2, SDEI_DYN_IRQ, SDEI_MAPF_DYNAMIC)
+
+#define ARM_SDEI_SHARED_EVENTS \
+ SDEI_SHARED_EVENT(ARM_SDEI_DS_EVENT_0, SDEI_DYN_IRQ, SDEI_MAPF_DYNAMIC), \
+ SDEI_SHARED_EVENT(ARM_SDEI_DS_EVENT_1, SDEI_DYN_IRQ, SDEI_MAPF_DYNAMIC), \
+ SDEI_SHARED_EVENT(ARM_SDEI_DS_EVENT_2, SDEI_DYN_IRQ, SDEI_MAPF_DYNAMIC)
+#endif /* SDEI_IN_FCONF */
+
+#endif /* ARM_DEF_H */
diff --git a/include/plat/nuvoton/common/plat_macros.S b/include/plat/nuvoton/common/plat_macros.S
new file mode 100644
index 0000000..08f9feb
--- /dev/null
+++ b/include/plat/nuvoton/common/plat_macros.S
@@ -0,0 +1,47 @@
+/*
+ * Copyright (c) 2015-2023, ARM Limited and Contributors. All rights reserved.
+ *
+ * Copyright (c) 2017-2023 Nuvoton Technology Corp.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLAT_MACROS_S
+#define PLAT_MACROS_S
+
+#include <arm_macros.S>
+#include <cci_macros.S>
+#include <platform_def.h>
+
+/*
+ * The below macro prints out relevant GIC
+ * registers whenever an unhandled exception is
+ * taken in BL3-1.
+ * Clobbers: x0 - x10, x16, x17, sp
+ */
+.macro plat_print_gic_regs
+mov_imm x17, BASE_GICC_BASE
+mov_imm x16, BASE_GICD_BASE
+arm_print_gic_regs
+.endm
+
+/*
+ * the below macros print out relevant interconnect
+ * registers whenever an unhandled exception is
+ * taken in BL3-1
+ */
+.macro plat_print_interconnect_regs
+ /* TODO */
+.endm
+
+/*
+ * The below required platform porting macro
+ * prints out relevant platform registers
+ * whenever an unhandled exception is taken in
+ * BL31.
+ */
+.macro plat_crash_print_regs
+ /* TODO */
+.endm
+
+#endif /* PLAT_MACROS_S */
diff --git a/include/plat/nuvoton/common/plat_npcm845x.h b/include/plat/nuvoton/common/plat_npcm845x.h
new file mode 100644
index 0000000..d90952a
--- /dev/null
+++ b/include/plat/nuvoton/common/plat_npcm845x.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright (c) 2015-2023, ARM Limited and Contributors. All rights reserved.
+ *
+ * Copyright (c) 2017-2023 Nuvoton Technology Corp.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLAT_NPCM845X_H
+#define PLAT_NPCM845X_H
+
+#include <drivers/arm/gicv2.h>
+#include <lib/psci/psci.h>
+
+unsigned int plat_calc_core_pos(uint64_t mpidr);
+void npcm845x_mailbox_init(uintptr_t base_addr);
+void plat_gic_driver_init(void);
+void plat_gic_init(void);
+void plat_gic_cpuif_enable(void);
+void plat_gic_cpuif_disable(void);
+void plat_gic_pcpu_init(void);
+
+void __dead2 npcm845x_system_off(void);
+void __dead2 npcm845x_system_reset(void);
+void npcm845x_pwr_domain_on_finish(const psci_power_state_t *target_state);
+bool npcm845x_is_wakeup_src_irqsteer(void);
+void __dead2 npcm845x_pwr_down_wfi(const psci_power_state_t *target_state);
+void npcm845x_cpu_standby(plat_local_state_t cpu_state);
+int npcm845x_validate_ns_entrypoint(uintptr_t entrypoint);
+int npcm845x_pwr_domain_on(u_register_t mpidr);
+int npcm845x_validate_power_state(unsigned int power_state,
+ psci_power_state_t *req_state);
+
+#if !ARM_BL31_IN_DRAM
+void npcm845x_get_sys_suspend_power_state(psci_power_state_t *req_state);
+#endif
+
+void __dead2 npcm845x_pwr_domain_pwr_down_wfi(
+ const psci_power_state_t *target_state);
+void npcm845x_pwr_domain_suspend_finish(const psci_power_state_t *target_state);
+void npcm845x_pwr_domain_suspend(const psci_power_state_t *target_state);
+void npcm845x_pwr_domain_off(const psci_power_state_t *target_state);
+void __init npcm845x_bl31_plat_arch_setup(void);
+
+#endif /* PLAT_NPCM845X_H */
diff --git a/include/plat/nuvoton/npcm845x/platform_def.h b/include/plat/nuvoton/npcm845x/platform_def.h
new file mode 100644
index 0000000..09da36b
--- /dev/null
+++ b/include/plat/nuvoton/npcm845x/platform_def.h
@@ -0,0 +1,303 @@
+/*
+ * Copyright (c) 2015-2023, ARM Limited and Contributors. All rights reserved.
+ *
+ * Copyright (c) 2017-2023 Nuvoton Technology Corp.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLATFORM_DEF_H
+#define PLATFORM_DEF_H
+
+#include <arch.h>
+#include <common/interrupt_props.h>
+#include <common/tbbr/tbbr_img_def.h>
+#include <drivers/arm/gic_common.h>
+#include <lib/utils_def.h>
+#include <lib/xlat_tables/xlat_tables_defs.h>
+#include <npcm845x_arm_def.h>
+#include <plat/arm/common/smccc_def.h>
+#include <plat/common/common_def.h>
+
+#define VALUE_TO_STRING(x) #x
+#define VALUE(x) VALUE_TO_STRING(x)
+#define VAR_NAME_VALUE(var) #var "=" VALUE(var)
+
+#define PLATFORM_LINKER_FORMAT "elf64-littleaarch64"
+#define PLATFORM_LINKER_ARCH aarch64
+
+#define PLATFORM_STACK_SIZE 0x400
+
+#define PLATFORM_CORE_COUNT NPCM845x_PLATFORM_CORE_COUNT
+#define PLATFORM_CLUSTER_COUNT NPCM845x_CLUSTER_COUNT
+#define PLATFORM_MAX_CPU_PER_CLUSTER NPCM845x_MAX_CPU_PER_CLUSTER
+#define PLAT_PRIMARY_CPU NPCM845x_PLAT_PRIMARY_CPU
+#define PLATFORM_SYSTEM_COUNT NPCM845x_SYSTEM_COUNT
+
+/* Local power state for power domains in Run state. */
+#define PLAT_LOCAL_STATE_RUN U(0)
+/* Local power state for retention. Valid only for CPU power domains */
+#define PLAT_LOCAL_STATE_RET U(1)
+/*
+ * Local power state for OFF/power-down. Valid for CPU and cluster power
+ * domains.
+ */
+#define PLAT_LOCAL_STATE_OFF U(2)
+
+/*
+ * This macro defines the deepest power down states possible. Any state ID
+ * higher than this is invalid.
+ */
+#define PLAT_MAX_OFF_STATE PLAT_LOCAL_STATE_OFF
+#define PLAT_MAX_RET_STATE PLAT_LOCAL_STATE_RET
+
+#define PLAT_NUM_PWR_DOMAINS (PLATFORM_CLUSTER_COUNT + PLATFORM_CORE_COUNT)
+#define NPCM845x_MAX_PWR_LVL ARM_PWR_LVL1
+
+/*
+ * Macros used to parse state information from State-ID if it is using the
+ * recommended encoding for State-ID.
+ */
+#define PLAT_LOCAL_PSTATE_WIDTH 4
+#define PLAT_LOCAL_PSTATE_MASK ((1 << PLAT_LOCAL_PSTATE_WIDTH) - 1)
+
+/*
+ * Required ARM standard platform porting definitions
+ */
+#define PLAT_ARM_CLUSTER_COUNT PLATFORM_CLUSTER_COUNT
+
+#define PLAT_NUM_PWR_DOMAINS (PLATFORM_CLUSTER_COUNT + PLATFORM_CORE_COUNT)
+#define PLAT_MAX_PWR_LVL NPCM845x_MAX_PWR_LVL
+
+#define PLAT_LOCAL_PSTATE_WIDTH 4
+#define PLAT_LOCAL_PSTATE_MASK ((1 << PLAT_LOCAL_PSTATE_WIDTH) - 1)
+
+#ifdef BL32_BASE
+
+#ifndef CONFIG_TARGET_ARBEL_PALLADIUM
+#define PLAT_ARM_TRUSTED_DRAM_BASE BL32_BASE
+#else
+#define PLAT_ARM_TRUSTED_DRAM_BASE BL32_BASE
+#endif /* CONFIG_TARGET_ARBEL_PALLADIUM */
+
+#define PLAT_ARM_TRUSTED_DRAM_SIZE UL(0x02000000) /* 32 MB */
+#endif /* BL32_BASE */
+
+#define PWR_DOMAIN_AT_MAX_LVL U(1)
+
+#define PLAT_VIRT_ADDR_SPACE_SIZE (1ull << 32)
+#define PLAT_PHY_ADDR_SPACE_SIZE (1ull << 32)
+#define MAX_XLAT_TABLES 16
+#define PLAT_ARM_MMAP_ENTRIES 17
+
+#ifdef NPCM845X_DEBUG
+#define MAX_MMAP_REGIONS 8
+#define NPCM845X_TZ1_BASE 0xFFFB0000
+#endif /* NPCM845X_DEBUG */
+
+#define FIQ_SMP_CALL_SGI 10
+
+/* (0x00040000) 128 KB, the rest 128K if it is non secured */
+#define PLAT_ARM_TRUSTED_SRAM_SIZE UL(0x00020000)
+
+#define ARM_SHARED_RAM_SIZE UL(0x00001000) /* 4 KB */
+
+/* UL(0xfffCE000) add calc ARM_TRUSTED_SRAM_BASE */
+#define ARM_SHARED_RAM_BASE (BL31_BASE + 0x00020000 - ARM_SHARED_RAM_SIZE)
+
+/* The remaining Trusted SRAM is used to load the BL images */
+#define ARM_BL_RAM_BASE (ARM_SHARED_RAM_BASE + ARM_SHARED_RAM_SIZE)
+
+/*
+ * PLAT_ARM_TRUSTED_SRAM_SIZE is taken from platform_def.h 0x20000
+ * because only half is secured in this specific implementation
+ */
+#define ARM_BL_RAM_SIZE (PLAT_ARM_TRUSTED_SRAM_SIZE - ARM_SHARED_RAM_SIZE)
+
+#if RESET_TO_BL31
+/* Size of Trusted SRAM - the first 4KB of shared memory */
+#define PLAT_ARM_MAX_BL31_SIZE \
+ (PLAT_ARM_TRUSTED_SRAM_SIZE - ARM_SHARED_RAM_SIZE)
+#else
+/*
+ * Since BL31 NOBITS overlays BL2 and BL1-RW, PLAT_ARM_MAX_BL31_SIZE
+ * is calculated using the current BL31 PROGBITS debug size plus the sizes
+ * of BL2 and BL1-RW
+ */
+#define PLAT_ARM_MAX_BL31_SIZE \
+ (PLAT_ARM_TRUSTED_SRAM_SIZE - ARM_SHARED_RAM_SIZE)
+#endif /* RESET_TO_BL31 */
+/*
+ * Load address of BL33 for this platform port
+ */
+#define PLAT_ARM_NS_IMAGE_BASE (ARM_DRAM1_BASE + UL(0x6208000))
+
+#ifdef NPCM845X_DEBUG
+#define COUNTER_FREQUENCY 0x07735940 /* f/4 = 125MHz */
+#endif /* NPCM845X_DEBUG */
+
+#define COUNTER_FREQUENCY 0x0EE6B280 /* f/2 = 250MHz */
+#define PLAT_ARM_NSTIMER_FRAME_ID U(1)
+
+/* GIC parameters */
+
+/* Base compatible GIC memory map */
+#define NT_GIC_BASE (0xDFFF8000)
+#define BASE_GICD_BASE (NT_GIC_BASE + 0x1000)
+#define BASE_GICC_BASE (NT_GIC_BASE + 0x2000)
+#define BASE_GICR_BASE (NT_GIC_BASE + 0x200000)
+#define BASE_GICH_BASE (NT_GIC_BASE + 0x4000)
+#define BASE_GICV_BASE (NT_GIC_BASE + 0x6000)
+
+#define DEVICE1_BASE BASE_GICD_BASE
+#define DEVICE1_SIZE 0x7000
+
+#ifdef NPCM845X_DEBUG
+/* ((BASE_GICR_BASE - BASE_GICD_BASE) + (PLATFORM_CORE_COUNT * 0x20000)) */
+#define ARM_CPU_START_ADDRESS(m) UL(0xf0800e00 + 0x10 + m * 4)
+#endif /* NPCM845X_DEBUG */
+
+#define PLAT_REG_BASE NPCM845x_REG_BASE
+#define PLAT_REG_SIZE NPCM845x_REG_SIZE
+
+/* MMU entry for internal (register) space access */
+#define MAP_DEVICE0 \
+ MAP_REGION_FLAT(PLAT_REG_BASE, PLAT_REG_SIZE, MT_DEVICE | MT_RW | MT_NS)
+
+#define MAP_DEVICE1 \
+ MAP_REGION_FLAT(DEVICE1_BASE, DEVICE1_SIZE, \
+ MT_DEVICE | MT_RW | MT_SECURE)
+
+/*
+ * Define a list of Group 1 Secure and Group 0 interrupt properties
+ * as per GICv3 terminology. On a GICv2 system or mode,
+ * the lists will be merged and treated as Group 0 interrupts.
+ */
+#define PLAT_ARM_GICD_BASE BASE_GICD_BASE
+#define PLAT_ARM_GICC_BASE BASE_GICC_BASE
+
+#define PLAT_ARM_G1S_IRQ_PROPS(grp) \
+ INTR_PROP_DESC(ARM_IRQ_SEC_PHY_TIMER, GIC_HIGHEST_SEC_PRIORITY, grp, \
+ GIC_INTR_CFG_LEVEL), \
+ INTR_PROP_DESC(ARM_IRQ_SEC_SGI_0, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_EDGE), \
+ INTR_PROP_DESC(ARM_IRQ_SEC_SGI_1, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_EDGE), \
+ INTR_PROP_DESC(ARM_IRQ_SEC_SGI_2, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_EDGE), \
+ INTR_PROP_DESC(ARM_IRQ_SEC_SGI_3, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_EDGE), \
+ INTR_PROP_DESC(ARM_IRQ_SEC_SGI_4, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_EDGE), \
+ INTR_PROP_DESC(ARM_IRQ_SEC_SGI_5, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_EDGE), \
+ INTR_PROP_DESC(ARM_IRQ_SEC_SGI_6, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_EDGE), \
+ INTR_PROP_DESC(ARM_IRQ_SEC_SGI_7, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_EDGE)
+
+#define PLAT_ARM_G0_IRQ_PROPS(grp)
+
+/* Required for compilation: */
+
+/*
+ * PLAT_ARM_MAX_BL1_RW_SIZE is calculated using the current BL1 RW debug size
+ * plus a little space for growth.
+ */
+#define PLAT_ARM_MAX_BL1_RW_SIZE 0 /* UL(0xB000) */
+#if USE_ROMLIB
+#define PLAT_ARM_MAX_ROMLIB_RW_SIZE UL(0x1000)
+#define PLAT_ARM_MAX_ROMLIB_RO_SIZE UL(0xe000)
+#define FVP_BL2_ROMLIB_OPTIMIZATION UL(0x6000)
+#else
+#define PLAT_ARM_MAX_ROMLIB_RW_SIZE UL(0)
+#define PLAT_ARM_MAX_ROMLIB_RO_SIZE UL(0)
+#define FVP_BL2_ROMLIB_OPTIMIZATION UL(0)
+#endif /* USE_ROMLIB */
+
+/*
+ * PLAT_ARM_MAX_BL2_SIZE is calculated using the current BL2 debug size
+ * plus a little space for growth.
+ */
+#if TRUSTED_BOARD_BOOT
+#define PLAT_ARM_MAX_BL2_SIZE (UL(0x1D000) * FVP_BL2_ROMLIB_OPTIMIZATION)
+#else
+/* (UL(0x13000) - FVP_BL2_ROMLIB_OPTIMIZATION) */
+#define PLAT_ARM_MAX_BL2_SIZE 0
+#endif /* TRUSTED_BOARD_BOOT */
+
+#undef NPCM_PRINT_ONCE
+#ifdef NPCM_PRINT_ONCE
+#define PRINT_ONLY_ONCE
+#pragma message(VAR_NAME_VALUE(ARM_AP_TZC_DRAM1_BASE))
+#pragma message(VAR_NAME_VALUE(BL31_BASE))
+#pragma message(VAR_NAME_VALUE(BL31_LIMIT))
+#pragma message(VAR_NAME_VALUE(PLAT_ARM_MAX_BL31_SIZE))
+#pragma message(VAR_NAME_VALUE(BL32_BASE))
+#pragma message(VAR_NAME_VALUE(BL32_LIMIT))
+#pragma message(VAR_NAME_VALUE(PLAT_ARM_MAX_BL32_SIZE)
+#pragma message(VAR_NAME_VALUE(SPMD_SPM_AT_SEL2_KKO))
+#endif /* NPCM_PRINT_ONCE */
+
+#define MAX_IO_DEVICES 4
+#define MAX_IO_HANDLES 4
+
+#define PLAT_ARM_FIP_BASE 0x0
+#define PLAT_ARM_FIP_MAX_SIZE PLAT_ARM_MAX_BL31_SIZE
+
+#define PLAT_ARM_BOOT_UART_BASE 0xF0000000
+#define PLAT_ARM_BOOT_UART_CLK_IN_HZ 115200
+#define PLAT_ARM_RUN_UART_BASE 0xF0000000
+#define PLAT_ARM_RUN_UART_CLK_IN_HZ 115200
+#define PLAT_ARM_CRASH_UART_BASE 0xF0000000
+#define PLAT_ARM_CRASH_UART_CLK_IN_HZ 115200
+
+/*
+ * Mailbox to control the secondary cores.All secondary cores are held in a wait
+ * loop in cold boot. To release them perform the following steps (plus any
+ * additional barriers that may be needed):
+ *
+ * uint64_t *entrypoint = (uint64_t *)PLAT_NPCM_TM_ENTRYPOINT;
+ * *entrypoint = ADDRESS_TO_JUMP_TO;
+ *
+ * uint64_t *mbox_entry = (uint64_t *)PLAT_NPCM_TM_HOLD_BASE;
+ * mbox_entry[cpu_id] = PLAT_NPCM_TM_HOLD_BASE;
+ *
+ * sev();
+ */
+#define PLAT_NPCM_TRUSTED_MAILBOX_BASE ARM_SHARED_RAM_BASE
+
+/* The secure entry point to be used on warm reset by all CPUs. */
+#define PLAT_NPCM_TM_ENTRYPOINT PLAT_NPCM_TRUSTED_MAILBOX_BASE
+#define PLAT_NPCM_TM_ENTRYPOINT_SIZE ULL(8)
+
+/* Hold entries for each CPU. */
+#define PLAT_NPCM_TM_HOLD_BASE \
+ (PLAT_NPCM_TM_ENTRYPOINT + PLAT_NPCM_TM_ENTRYPOINT_SIZE)
+#define PLAT_NPCM_TM_HOLD_ENTRY_SIZE ULL(8)
+#define PLAT_NPCM_TM_HOLD_SIZE \
+ (PLAT_NPCM_TM_HOLD_ENTRY_SIZE * PLATFORM_CORE_COUNT)
+#define PLAT_NPCM_TRUSTED_NOTIFICATION_BASE \
+ (PLAT_NPCM_TM_ENTRYPOINT_SIZE + PLAT_NPCM_TM_HOLD_SIZE)
+
+#define PLAT_NPCM_TRUSTED_NOTIFICATION_ENTRY_SIZE ULL(8)
+
+#define PLAT_NPCM_TRUSTED_NOTIFICATION_SIZE \
+ (PLAT_NPCM_TRUSTED_NOTIFICATION_ENTRY_SIZE * PLATFORM_CORE_COUNT)
+
+#define PLAT_NPCM_TRUSTED_MAILBOX_SIZE \
+ (PLAT_NPCM_TM_ENTRYPOINT_SIZE + PLAT_NPCM_TM_HOLD_SIZE + \
+ PLAT_NPCM_TRUSTED_NOTIFICATION_ENTRY_SIZE)
+
+#define PLAT_NPCM_TM_HOLD_STATE_WAIT ULL(0)
+#define PLAT_NPCM_TM_HOLD_STATE_GO ULL(1)
+#define PLAT_NPCM_TM_HOLD_STATE_BSP_OFF ULL(2)
+
+#define PLAT_NPCM_TM_NOTIFICATION_START ULL(0xAA)
+#define PLAT_NPCM_TM_NOTIFICATION_BR ULL(0xCC)
+
+#ifdef NPCM845X_DEBUG
+#define PLAT_ARM_TRUSTED_MAILBOX_BASE 0xfffB0000
+#endif /* NPCM845X_DEBUG */
+
+#endif /* PLATFORM_DEF_H */