docs(layerscape): add ls1046a soc and board support
Update document for nxp-layerscape to add ls1046a SoC and ls1046ardb,
ls1046afrwy board support.
Also update maintainer of ls1046a platforms.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I522f978bc93aa8d1f1d60fa8efef392b7d854df7
diff --git a/docs/about/maintainers.rst b/docs/about/maintainers.rst
index e0a7587..69aad08 100644
--- a/docs/about/maintainers.rst
+++ b/docs/about/maintainers.rst
@@ -561,6 +561,15 @@
:|F|: plat/nxp/soc-ls1043a
:|F|: plat/nxp/soc-ls1043a/ls1043ardb
+NXP SoC Part LS1046A and its platform port
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+:|M|: Jiafei Pan <jiafei.pan@nxp.com>
+:|G|: `JiafeiPan`_
+:|F|: plat/nxp/soc-ls1046a
+:|F|: plat/nxp/soc-ls1046a/ls1046ardb
+:|F|: plat/nxp/soc-ls1046a/ls1046afrwy
+:|F|: plat/nxp/soc-ls1046a/ls1046aqds
+
QEMU platform port
^^^^^^^^^^^^^^^^^^
:|M|: Jens Wiklander <jens.wiklander@linaro.org>
diff --git a/docs/plat/nxp/nxp-layerscape.rst b/docs/plat/nxp/nxp-layerscape.rst
index bae779c..6cbd7f9 100644
--- a/docs/plat/nxp/nxp-layerscape.rst
+++ b/docs/plat/nxp/nxp-layerscape.rst
@@ -93,6 +93,39 @@
Details about LS1043A RDB board can be found at `ls1043ardb`_.
+4. LS1046A
+
+- SoC Overview:
+
+The LS1046A is a cost-effective, power-efficient, and highly integrated
+system-on-chip (SoC) design that extends the reach of the NXP value-performance
+line of QorIQ communications processors. Featuring power-efficient 64-bit
+Arm Cortex-A72 cores with ECC-protected L1 and L2 cache memories for high
+reliability, running up to 1.8 GHz.
+
+Details about LS1043A can be found at `ls1046a`_.
+
+- LS1046ARDB Board:
+
+The LS1046A reference design board (RDB) is a high-performance computing,
+evaluation, and development platform that supports the Layerscape LS1046A
+architecture processor. The LS1046ARDB board supports the Layerscape LS1046A
+processor and is optimized to support the DDR4 memory and a full complement
+of high-speed SerDes ports.
+
+Details about LS1043A RDB board can be found at `ls1046ardb`_.
+
+- LS1046AFRWY Board:
+
+The LS1046A Freeway board (FRWY) is a high-performance computing, evaluation,
+and development platform that supports the LS1046A architecture processor
+capable of support more than 32,000 CoreMark performance. The FRWY-LS1046A
+board supports the LS1046A processor, onboard DDR4 memory, multiple Gigabit
+Ethernet, USB3.0 and M2_Type_E interfaces for Wi-Fi, FRWY-LS1046A-AC includes
+the Wi-Fi card.
+
+Details about LS1043A RDB board can be found at `ls1046afrwy`_.
+
Table of supported boot-modes by each platform & platform that needs FIP-DDR:
-----------------------------------------------------------------------------
@@ -107,6 +140,10 @@
+---------------------+-------+--------+-------+-------+-------+-------------+--------------+-----------------+
| ls1043ardb | yes | | yes | yes | | | | no |
+---------------------+-------+--------+-------+-------+-------+-------------+--------------+-----------------+
+| ls1046ardb | yes | yes | | | yes | | | no |
++---------------------+-------+--------+-------+-------+-------+-------------+--------------+-----------------+
+| ls1046afrwy | yes | yes | | | | | | no |
++---------------------+-------+--------+-------+-------+-------+-------------+--------------+-----------------+
Boot Sequence
@@ -275,32 +312,42 @@
Note: The size in the standard uboot commands for copy to nor, qspi, nand or sd
should be modified based on the binary size of the image to be copied.
+- Deploy ATF images on flexspi-Nor or QSPI flash Alt Bank from U-Boot prompt.
+
+ -- Commands to flash images for bl2_xxx.pbl and fip.bin
+
-- Deploy ATF images on flexspi-Nor flash Alt Bank from U-Boot prompt.
- -- Commands to flash images for bl2_xxx.pbl and fip.bin.
+ Notes: ls1028ardb has no flexspi-Nor Alt Bank, so use "sf probe 0:0" for current bank.
.. code:: shell
- tftp 82000000 $path/bl2_flexspi_nor.pbl;
- i2c mw 66 50 20;sf probe 0:0; sf erase 0 +$filesize; sf write 0x82000000 0x0 $filesize;
+ tftp 82000000 $path/bl2_xxx.pbl;
+
+ i2c mw 66 50 20;sf probe 0:1; sf erase 0 +$filesize; sf write 0x82000000 0x0 $filesize;
tftp 82000000 $path/fip.bin;
- i2c mw 66 50 20;sf probe 0:0; sf erase 0x100000 +$filesize; sf write 0x82000000 0x100000 $filesize;
+ i2c mw 66 50 20;sf probe 0:1; sf erase 0x100000 +$filesize; sf write 0x82000000 0x100000 $filesize;
-- Next step is valid for platform where FIP-DDR is needed.
.. code:: shell
tftp 82000000 $path/ddr_fip.bin;
- i2c mw 66 50 20;sf probe 0:0; sf erase 0x800000 +$filesize; sf write 0x82000000 0x800000 $filesize;
+ i2c mw 66 50 20;sf probe 0:1; sf erase 0x800000 +$filesize; sf write 0x82000000 0x800000 $filesize;
-- Then reset to alternate bank to boot up ATF.
- Command for lx2160A and ls1028a platforms:
+ Command for lx2160a and ls1028a platforms:
.. code:: shell
qixisreset altbank;
+ Command for ls1046a platforms:
+
+ .. code:: shell
+
+ cpld reset altbank;
+
- Deploy ATF images on SD/eMMC from U-Boot prompt.
-- file_size_in_block_sizeof_512 = (Size_of_bytes_tftp / 512)
@@ -329,7 +376,7 @@
qixisreset <sd or emmc>;
- Command for ls1043a platform:
+ Command for ls1043a and ls1046a platform:
.. code:: shell
@@ -395,4 +442,7 @@
.. _ls1028ardb: https://www.nxp.com/design/qoriq-developer-resources/layerscape-ls1028a-reference-design-board:LS1028ARDB
.. _ls1043a: https://www.nxp.com/products/processors-and-microcontrollers/arm-processors/layerscape-processors/layerscape-1043a-and-1023a-processors:LS1043A
.. _ls1043ardb: https://www.nxp.com/design/qoriq-developer-resources/layerscape-ls1043a-reference-design-board:LS1043A-RDB
+.. _ls1046a: https://www.nxp.com/products/processors-and-microcontrollers/arm-processors/layerscape-processors/layerscape-1046a-and-1026a-processors:LS1046A
+.. _ls1046ardb: https://www.nxp.com/design/qoriq-developer-resources/layerscape-ls1046a-reference-design-board:LS1046A-RDB
+.. _ls1046afrwy: https://www.nxp.com/design/qoriq-developer-resources/ls1046a-freeway-board:FRWY-LS1046A
.. _nxp-ls-tbbr.rst: ./nxp-ls-tbbr.rst