Remove duplicated definitions of linker symbols
Many parts of the code were duplicating symbols that are defined in
include/common/bl_common.h. It is better to only use the definitions in
this header.
As all the symbols refer to virtual addresses, they have to be
uintptr_t, not unsigned long. This has also been fixed in bl_common.h.
Change-Id: I204081af78326ced03fb05f69846f229d324c711
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
diff --git a/plat/hisilicon/poplar/bl2_plat_setup.c b/plat/hisilicon/poplar/bl2_plat_setup.c
index ff8e107..11403b0 100644
--- a/plat/hisilicon/poplar/bl2_plat_setup.c
+++ b/plat/hisilicon/poplar/bl2_plat_setup.c
@@ -24,14 +24,6 @@
#include "hi3798cv200.h"
#include "plat_private.h"
-/* Memory ranges for code and read only data sections */
-#define BL2_RO_BASE (unsigned long)(&__RO_START__)
-#define BL2_RO_LIMIT (unsigned long)(&__RO_END__)
-
-/* Memory ranges for coherent memory section */
-#define BL2_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
-#define BL2_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)
-
static meminfo_t bl2_tzram_layout __aligned(CACHE_WRITEBACK_GRANULE);
static console_pl011_t console;
@@ -206,10 +198,10 @@
{
plat_configure_mmu_el1(bl2_tzram_layout.total_base,
bl2_tzram_layout.total_size,
- BL2_RO_BASE,
- BL2_RO_LIMIT,
- BL2_COHERENT_RAM_BASE,
- BL2_COHERENT_RAM_LIMIT);
+ BL_CODE_BASE,
+ BL_CODE_END,
+ BL_COHERENT_RAM_BASE,
+ BL_COHERENT_RAM_END);
}
void bl2_platform_setup(void)
diff --git a/plat/hisilicon/poplar/bl31_plat_setup.c b/plat/hisilicon/poplar/bl31_plat_setup.c
index 69911e8..f81078f 100644
--- a/plat/hisilicon/poplar/bl31_plat_setup.c
+++ b/plat/hisilicon/poplar/bl31_plat_setup.c
@@ -25,14 +25,6 @@
#include "hi3798cv200.h"
#include "plat_private.h"
-/* Memory ranges for code and RO data sections */
-#define BL31_RO_BASE (unsigned long)(&__RO_START__)
-#define BL31_RO_LIMIT (unsigned long)(&__RO_END__)
-
-/* Memory ranges for coherent memory section */
-#define BL31_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
-#define BL31_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)
-
#define TZPC_SEC_ATTR_CTRL_VALUE (0x9DB98D45)
static entry_point_info_t bl32_image_ep_info;
@@ -133,10 +125,10 @@
{
plat_configure_mmu_el3(BL31_BASE,
(BL31_LIMIT - BL31_BASE),
- BL31_RO_BASE,
- BL31_RO_LIMIT,
- BL31_COHERENT_RAM_BASE,
- BL31_COHERENT_RAM_LIMIT);
+ BL_CODE_BASE,
+ BL_CODE_END,
+ BL_COHERENT_RAM_BASE,
+ BL_COHERENT_RAM_END);
INFO("Boot BL33 from 0x%lx for %lu Bytes\n",
bl33_image_ep_info.pc, bl33_image_ep_info.args.arg2);