diff --git a/include/drivers/st/stm32_uart.h b/include/drivers/st/stm32_uart.h
new file mode 100644
index 0000000..212968f
--- /dev/null
+++ b/include/drivers/st/stm32_uart.h
@@ -0,0 +1,170 @@
+/*
+ * Copyright (c) 2021, STMicroelectronics - All Rights Reserved
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef STM32_UART_H
+#define STM32_UART_H
+
+/* UART word length */
+#define STM32_UART_WORDLENGTH_7B		USART_CR1_M1
+#define STM32_UART_WORDLENGTH_8B		0x00000000U
+#define STM32_UART_WORDLENGTH_9B		USART_CR1_M0
+
+/* UART number of stop bits */
+#define STM32_UART_STOPBITS_0_5			USART_CR2_STOP_0
+#define STM32_UART_STOPBITS_1			0x00000000U
+#define STM32_UART_STOPBITS_1_5			(USART_CR2_STOP_0 | USART_CR2_STOP_1)
+#define STM32_UART_STOPBITS_2			USART_CR2_STOP_1
+
+/* UART parity */
+#define STM32_UART_PARITY_NONE			0x00000000U
+#define STM32_UART_PARITY_EVEN			USART_CR1_PCE
+#define STM32_UART_PARITY_ODD			(USART_CR1_PCE | USART_CR1_PS)
+
+/* UART transfer mode */
+#define STM32_UART_MODE_RX			USART_CR1_RE
+#define STM32_UART_MODE_TX			USART_CR1_TE
+#define STM32_UART_MODE_TX_RX			(USART_CR1_TE | USART_CR1_RE)
+
+/* UART hardware flow control */
+#define STM32_UART_HWCONTROL_NONE		0x00000000U
+#define STM32_UART_HWCONTROL_RTS		USART_CR3_RTSE
+#define STM32_UART_HWCONTROL_CTS		USART_CR3_CTSE
+#define STM32_UART_HWCONTROL_RTS_CTS		(USART_CR3_RTSE | USART_CR3_CTSE)
+
+/* UART over sampling */
+#define STM32_UART_OVERSAMPLING_16		0x00000000U
+#define STM32_UART_OVERSAMPLING_8		USART_CR1_OVER8
+
+/* UART prescaler */
+#define STM32_UART_PRESCALER_DIV1		0x00000000U
+#define STM32_UART_PRESCALER_DIV2		0x00000001U
+#define STM32_UART_PRESCALER_DIV4		0x00000002U
+#define STM32_UART_PRESCALER_DIV6		0x00000003U
+#define STM32_UART_PRESCALER_DIV8		0x00000004U
+#define STM32_UART_PRESCALER_DIV10		0x00000005U
+#define STM32_UART_PRESCALER_DIV12		0x00000006U
+#define STM32_UART_PRESCALER_DIV16		0x00000007U
+#define STM32_UART_PRESCALER_DIV32		0x00000008U
+#define STM32_UART_PRESCALER_DIV64		0x00000009U
+#define STM32_UART_PRESCALER_DIV128		0x0000000AU
+#define STM32_UART_PRESCALER_DIV256		0x0000000BU
+#define STM32_UART_PRESCALER_NB			0x0000000CU
+
+/* UART fifo mode */
+#define STM32_UART_FIFOMODE_EN			USART_CR1_FIFOEN
+#define STM32_UART_FIFOMODE_DIS			0x00000000U
+
+/* UART TXFIFO threshold level */
+#define STM32_UART_TXFIFO_THRESHOLD_1EIGHTHFULL		0x00000000U
+#define STM32_UART_TXFIFO_THRESHOLD_1QUARTERFUL		USART_CR3_TXFTCFG_0
+#define STM32_UART_TXFIFO_THRESHOLD_HALFFULL		USART_CR3_TXFTCFG_1
+#define STM32_UART_TXFIFO_THRESHOLD_3QUARTERSFULL	(USART_CR3_TXFTCFG_0 | USART_CR3_TXFTCFG_1)
+#define STM32_UART_TXFIFO_THRESHOLD_7EIGHTHFULL		USART_CR3_TXFTCFG_2
+#define STM32_UART_TXFIFO_THRESHOLD_EMPTY		(USART_CR3_TXFTCFG_2 | USART_CR3_TXFTCFG_0)
+
+/* UART RXFIFO threshold level */
+#define STM32_UART_RXFIFO_THRESHOLD_1EIGHTHFULL		0x00000000U
+#define STM32_UART_RXFIFO_THRESHOLD_1QUARTERFULL	USART_CR3_RXFTCFG_0
+#define STM32_UART_RXFIFO_THRESHOLD_HALFFULL		USART_CR3_RXFTCFG_1
+#define STM32_UART_RXFIFO_THRESHOLD_3QUARTERSFULL	(USART_CR3_RXFTCFG_0 | USART_CR3_RXFTCFG_1)
+#define STM32_UART_RXFIFO_THRESHOLD_7EIGHTHFULL		USART_CR3_RXFTCFG_2
+#define STM32_UART_RXFIFO_THRESHOLD_FULL		(USART_CR3_RXFTCFG_2 | USART_CR3_RXFTCFG_0)
+
+struct stm32_uart_init_s {
+	uint32_t baud_rate;		/*
+					 * Configures the UART communication
+					 * baud rate.
+					 */
+
+	uint32_t word_length;		/*
+					 * Specifies the number of data bits
+					 * transmitted or received in a frame.
+					 * This parameter can be a value of
+					 * @ref STM32_UART_WORDLENGTH_*.
+					 */
+
+	uint32_t stop_bits;		/*
+					 * Specifies the number of stop bits
+					 * transmitted. This parameter can be
+					 * a value of @ref STM32_UART_STOPBITS_*.
+					 */
+
+	uint32_t parity;		/*
+					 * Specifies the parity mode.
+					 * This parameter can be a value of
+					 * @ref STM32_UART_PARITY_*.
+					 */
+
+	uint32_t mode;			/*
+					 * Specifies whether the receive or
+					 * transmit mode is enabled or
+					 * disabled. This parameter can be a
+					 * value of @ref @ref STM32_UART_MODE_*.
+					 */
+
+	uint32_t hw_flow_control;	/*
+					 * Specifies whether the hardware flow
+					 * control mode is enabled or
+					 * disabled. This parameter can be a
+					 * value of @ref STM32_UARTHWCONTROL_*.
+					 */
+
+	uint32_t over_sampling;		/*
+					 * Specifies whether the over sampling
+					 * 8 is enabled or disabled.
+					 * This parameter can be a value of
+					 * @ref STM32_UART_OVERSAMPLING_*.
+					 */
+
+	uint32_t one_bit_sampling;	/*
+					 * Specifies whether a single sample
+					 * or three samples' majority vote is
+					 * selected. This parameter can be 0
+					 * or USART_CR3_ONEBIT.
+					 */
+
+	uint32_t prescaler;		/*
+					 * Specifies the prescaler value used
+					 * to divide the UART clock source.
+					 * This parameter can be a value of
+					 * @ref STM32_UART_PRESCALER_*.
+					 */
+
+	uint32_t fifo_mode;		/*
+					 * Specifies if the FIFO mode will be
+					 * used. This parameter can be a value
+					 * of @ref STM32_UART_FIFOMODE_*.
+					 */
+
+	uint32_t tx_fifo_threshold;	/*
+					 * Specifies the TXFIFO threshold
+					 * level. This parameter can be a
+					 * value of @ref
+					 * STM32_UART_TXFIFO_THRESHOLD_*.
+					 */
+
+	uint32_t rx_fifo_threshold;	/*
+					 * Specifies the RXFIFO threshold
+					 * level. This parameter can be a
+					 * value of @ref
+					 * STM32_UART_RXFIFO_THRESHOLD_*.
+					 */
+};
+
+struct stm32_uart_handle_s {
+	uint32_t base;
+	uint32_t rdr_mask;
+};
+
+int stm32_uart_init(struct stm32_uart_handle_s *huart,
+		    uintptr_t base_addr,
+		    const struct stm32_uart_init_s *init);
+void stm32_uart_stop(uintptr_t base_addr);
+int stm32_uart_putc(struct stm32_uart_handle_s *huart, int c);
+int stm32_uart_flush(struct stm32_uart_handle_s *huart);
+int stm32_uart_getc(struct stm32_uart_handle_s *huart);
+
+#endif /* STM32_UART_H */