AArch32: Add generic changes in BL2
This patch adds generic changes in BL2 to support AArch32 state.
New AArch32 specific assembly/C files are introduced and
some files are moved to AArch32/64 specific folders.
BL2 for AArch64 is refactored but functionally identical.
BL2 executes in Secure SVC mode in AArch32 state.
Change-Id: Ifaacbc2a91f8640876385b953adb24744d9dbde3
diff --git a/bl2/aarch32/bl2_entrypoint.S b/bl2/aarch32/bl2_entrypoint.S
new file mode 100644
index 0000000..6c620e2
--- /dev/null
+++ b/bl2/aarch32/bl2_entrypoint.S
@@ -0,0 +1,145 @@
+/*
+ * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+#include <bl_common.h>
+
+
+ .globl bl2_vector_table
+ .globl bl2_entrypoint
+
+
+vector_base bl2_vector_table
+ b bl2_entrypoint
+ b report_exception /* Undef */
+ b report_exception /* SVC call */
+ b report_exception /* Prefetch abort */
+ b report_exception /* Data abort */
+ b report_exception /* Reserved */
+ b report_exception /* IRQ */
+ b report_exception /* FIQ */
+
+
+func bl2_entrypoint
+ /*---------------------------------------------
+ * Save from r1 the extents of the trusted ram
+ * available to BL2 for future use.
+ * r0 is not currently used.
+ * ---------------------------------------------
+ */
+ mov r11, r1
+
+ /* ---------------------------------------------
+ * Set the exception vector to something sane.
+ * ---------------------------------------------
+ */
+ ldr r0, =bl2_vector_table
+ stcopr r0, VBAR
+ isb
+
+ /* -----------------------------------------------------
+ * Enable the instruction cache
+ * -----------------------------------------------------
+ */
+ ldcopr r0, SCTLR
+ orr r0, r0, #SCTLR_I_BIT
+ stcopr r0, SCTLR
+ isb
+
+ /* ---------------------------------------------
+ * Since BL2 executes after BL1, it is assumed
+ * here that BL1 has already has done the
+ * necessary register initializations.
+ * ---------------------------------------------
+ */
+
+ /* ---------------------------------------------
+ * Invalidate the RW memory used by the BL2
+ * image. This includes the data and NOBITS
+ * sections. This is done to safeguard against
+ * possible corruption of this memory by dirty
+ * cache lines in a system cache as a result of
+ * use by an earlier boot loader stage.
+ * ---------------------------------------------
+ */
+ ldr r0, =__RW_START__
+ ldr r1, =__RW_END__
+ sub r1, r1, r0
+ bl inv_dcache_range
+
+ /* ---------------------------------------------
+ * Zero out NOBITS sections. There are 2 of them:
+ * - the .bss section;
+ * - the coherent memory section.
+ * ---------------------------------------------
+ */
+ ldr r0, =__BSS_START__
+ ldr r1, =__BSS_SIZE__
+ bl zeromem
+
+#if USE_COHERENT_MEM
+ ldr r0, =__COHERENT_RAM_START__
+ ldr r1, =__COHERENT_RAM_UNALIGNED_SIZE__
+ bl zeromem
+#endif
+
+ /* --------------------------------------------
+ * Allocate a stack whose memory will be marked
+ * as Normal-IS-WBWA when the MMU is enabled.
+ * There is no risk of reading stale stack
+ * memory after enabling the MMU as only the
+ * primary cpu is running at the moment.
+ * --------------------------------------------
+ */
+ bl plat_set_my_stack
+
+ /* ---------------------------------------------
+ * Perform early platform setup & platform
+ * specific early arch. setup e.g. mmu setup
+ * ---------------------------------------------
+ */
+ mov r0, r11
+ bl bl2_early_platform_setup
+ bl bl2_plat_arch_setup
+
+ /* ---------------------------------------------
+ * Jump to main function.
+ * ---------------------------------------------
+ */
+ bl bl2_main
+
+ /* ---------------------------------------------
+ * Should never reach this point.
+ * ---------------------------------------------
+ */
+ bl plat_panic_handler
+
+endfunc bl2_entrypoint