board/rdn2: add board support for rdn2 platform
Add the initial board support for RD-N2 platform.
Change-Id: I8325885bf248dd92191d6fc92a2da91c23118f8c
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
diff --git a/plat/arm/board/rdn2/fdts/rdn2_fw_config.dts b/plat/arm/board/rdn2/fdts/rdn2_fw_config.dts
new file mode 100644
index 0000000..9c9cefe
--- /dev/null
+++ b/plat/arm/board/rdn2/fdts/rdn2_fw_config.dts
@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <common/tbbr/tbbr_img_def.h>
+
+/dts-v1/;
+
+/ {
+ dtb-registry {
+ compatible = "fconf,dyn_cfg-dtb_registry";
+
+ tb_fw-config {
+ load-address = <0x0 0x4001300>;
+ max-size = <0x200>;
+ id = <TB_FW_CONFIG_ID>;
+ };
+
+ nt_fw-config {
+ load-address = <0x0 0xFEF00000>;
+ max-size = <0x0100000>;
+ id = <NT_FW_CONFIG_ID>;
+ };
+ };
+};
diff --git a/plat/arm/board/rdn2/fdts/rdn2_nt_fw_config.dts b/plat/arm/board/rdn2/fdts/rdn2_nt_fw_config.dts
new file mode 100644
index 0000000..bbc36fc
--- /dev/null
+++ b/plat/arm/board/rdn2/fdts/rdn2_nt_fw_config.dts
@@ -0,0 +1,22 @@
+/*
+ * Copyright (c) 2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/dts-v1/;
+/ {
+ /* compatible string */
+ compatible = "arm,rd-n2";
+
+ /*
+ * Place holder for system-id node with default values. The
+ * value of platform-id and config-id will be set to the
+ * correct values during the BL2 stage of boot.
+ */
+ system-id {
+ platform-id = <0x0>;
+ config-id = <0x0>;
+ multi-chip-mode = <0x0>;
+ };
+};
diff --git a/plat/arm/board/rdn2/fdts/rdn2_tb_fw_config.dts b/plat/arm/board/rdn2/fdts/rdn2_tb_fw_config.dts
new file mode 100644
index 0000000..49eda27
--- /dev/null
+++ b/plat/arm/board/rdn2/fdts/rdn2_tb_fw_config.dts
@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/dts-v1/;
+
+/ {
+ tb_fw-config {
+ compatible = "arm,tb_fw";
+
+ /* Disable authentication for development */
+ disable_auth = <0x0>;
+
+ /*
+ * The following two entries are placeholders for Mbed TLS
+ * heap information. The default values don't matter since
+ * they will be overwritten by BL1.
+ * In case of having shared Mbed TLS heap between BL1 and BL2,
+ * BL1 will populate these two properties with the respective
+ * info about the shared heap. This info will be available for
+ * BL2 in order to locate and re-use the heap.
+ */
+ mbedtls_heap_addr = <0x0 0x0>;
+ mbedtls_heap_size = <0x0>;
+ };
+};