Merge pull request #575 from soby-mathew/sm/new_tzc_driver
Refactor the TZC driver and add DMC-500 driver
diff --git a/drivers/arm/tzc/tzc400.c b/drivers/arm/tzc/tzc400.c
new file mode 100644
index 0000000..ee6bf8d
--- /dev/null
+++ b/drivers/arm/tzc/tzc400.c
@@ -0,0 +1,259 @@
+/*
+ * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <assert.h>
+#include <debug.h>
+#include <mmio.h>
+#include <stddef.h>
+#include <tzc400.h>
+#include "tzc_common_private.c"
+
+/*
+ * Macros which will be used by common core functions.
+ */
+#define TZC_400_REGION_BASE_LOW_0_OFFSET 0x100
+#define TZC_400_REGION_BASE_HIGH_0_OFFSET 0x104
+#define TZC_400_REGION_TOP_LOW_0_OFFSET 0x108
+#define TZC_400_REGION_TOP_HIGH_0_OFFSET 0x10c
+#define TZC_400_REGION_ATTR_0_OFFSET 0x110
+#define TZC_400_REGION_ID_ACCESS_0_OFFSET 0x114
+
+/*
+ * Implementation defined values used to validate inputs later.
+ * Filters : max of 4 ; 0 to 3
+ * Regions : max of 9 ; 0 to 8
+ * Address width : Values between 32 to 64
+ */
+typedef struct tzc400_instance {
+ uintptr_t base;
+ uint8_t addr_width;
+ uint8_t num_filters;
+ uint8_t num_regions;
+} tzc400_instance_t;
+
+tzc400_instance_t tzc400;
+
+static inline unsigned int _tzc400_read_build_config(uintptr_t base)
+{
+ return mmio_read_32(base + BUILD_CONFIG_OFF);
+}
+
+static inline unsigned int _tzc400_read_gate_keeper(uintptr_t base)
+{
+ return mmio_read_32(base + GATE_KEEPER_OFF);
+}
+
+static inline void _tzc400_write_gate_keeper(uintptr_t base, unsigned int val)
+{
+ mmio_write_32(base + GATE_KEEPER_OFF, val);
+}
+
+/*
+ * Get the open status information for all filter units.
+ */
+#define get_gate_keeper_os(base) ((_tzc400_read_gate_keeper(base) >> \
+ GATE_KEEPER_OS_SHIFT) & \
+ GATE_KEEPER_OS_MASK)
+
+
+/* Define common core functions used across different TZC peripherals. */
+DEFINE_TZC_COMMON_WRITE_ACTION(400, 400)
+DEFINE_TZC_COMMON_WRITE_REGION_BASE(400, 400)
+DEFINE_TZC_COMMON_WRITE_REGION_TOP(400, 400)
+DEFINE_TZC_COMMON_WRITE_REGION_ATTRIBUTES(400, 400)
+DEFINE_TZC_COMMON_WRITE_REGION_ID_ACCESS(400, 400)
+DEFINE_TZC_COMMON_CONFIGURE_REGION0(400)
+DEFINE_TZC_COMMON_CONFIGURE_REGION(400)
+
+static unsigned int _tzc400_get_gate_keeper(uintptr_t base,
+ unsigned int filter)
+{
+ unsigned int open_status;
+
+ open_status = get_gate_keeper_os(base);
+
+ return (open_status >> filter) & GATE_KEEPER_FILTER_MASK;
+}
+
+/* This function is not MP safe. */
+static void _tzc400_set_gate_keeper(uintptr_t base,
+ unsigned int filter,
+ int val)
+{
+ unsigned int open_status;
+
+ /* Upper half is current state. Lower half is requested state. */
+ open_status = get_gate_keeper_os(base);
+
+ if (val)
+ open_status |= (1 << filter);
+ else
+ open_status &= ~(1 << filter);
+
+ _tzc400_write_gate_keeper(base, (open_status & GATE_KEEPER_OR_MASK) <<
+ GATE_KEEPER_OR_SHIFT);
+
+ /* Wait here until we see the change reflected in the TZC status. */
+ while ((get_gate_keeper_os(base)) != open_status)
+ ;
+}
+
+void tzc400_set_action(tzc_action_t action)
+{
+ assert(tzc400.base);
+ assert(action <= TZC_ACTION_ERR_INT);
+
+ /*
+ * - Currently no handler is provided to trap an error via interrupt
+ * or exception.
+ * - The interrupt action has not been tested.
+ */
+ _tzc400_write_action(tzc400.base, action);
+}
+
+void tzc400_init(uintptr_t base)
+{
+#if DEBUG
+ unsigned int tzc400_id;
+#endif
+ unsigned int tzc400_build;
+
+ assert(base);
+ tzc400.base = base;
+
+#if DEBUG
+ tzc400_id = _tzc_read_peripheral_id(base);
+ if (tzc400_id != TZC_400_PERIPHERAL_ID) {
+ ERROR("TZC-400 : Wrong device ID (0x%x).\n", tzc400_id);
+ panic();
+ }
+#endif
+
+ /* Save values we will use later. */
+ tzc400_build = _tzc400_read_build_config(tzc400.base);
+ tzc400.num_filters = ((tzc400_build >> BUILD_CONFIG_NF_SHIFT) &
+ BUILD_CONFIG_NF_MASK) + 1;
+ tzc400.addr_width = ((tzc400_build >> BUILD_CONFIG_AW_SHIFT) &
+ BUILD_CONFIG_AW_MASK) + 1;
+ tzc400.num_regions = ((tzc400_build >> BUILD_CONFIG_NR_SHIFT) &
+ BUILD_CONFIG_NR_MASK) + 1;
+}
+
+/*
+ * `tzc400_configure_region0` is used to program region 0 into the TrustZone
+ * controller. Region 0 covers the whole address space that is not mapped
+ * to any other region, and is enabled on all filters; this cannot be
+ * changed. This function only changes the access permissions.
+ */
+void tzc400_configure_region0(tzc_region_attributes_t sec_attr,
+ unsigned int ns_device_access)
+{
+ assert(tzc400.base);
+ assert(sec_attr <= TZC_REGION_S_RDWR);
+
+ _tzc400_configure_region0(tzc400.base, sec_attr, ns_device_access);
+}
+
+/*
+ * `tzc400_configure_region` is used to program regions into the TrustZone
+ * controller. A region can be associated with more than one filter. The
+ * associated filters are passed in as a bitmap (bit0 = filter0).
+ * NOTE:
+ * Region 0 is special; it is preferable to use tzc400_configure_region0
+ * for this region (see comment for that function).
+ */
+void tzc400_configure_region(unsigned int filters,
+ int region,
+ uintptr_t region_base,
+ uintptr_t region_top,
+ tzc_region_attributes_t sec_attr,
+ unsigned int nsaid_permissions)
+{
+ assert(tzc400.base);
+
+ /* Do range checks on filters and regions. */
+ assert(((filters >> tzc400.num_filters) == 0) &&
+ (region >= 0) && (region < tzc400.num_regions));
+
+ /*
+ * Do address range check based on TZC configuration. A 64bit address is
+ * the max and expected case.
+ */
+ assert(((region_top <= (UINT64_MAX >> (64 - tzc400.addr_width))) &&
+ (region_base < region_top)));
+
+ /* region_base and (region_top + 1) must be 4KB aligned */
+ assert(((region_base | (region_top + 1)) & (4096 - 1)) == 0);
+
+ assert(sec_attr <= TZC_REGION_S_RDWR);
+
+ _tzc400_configure_region(tzc400.base, filters, region, region_base,
+ region_top,
+ sec_attr, nsaid_permissions);
+}
+
+void tzc400_enable_filters(void)
+{
+ unsigned int state;
+ unsigned int filter;
+
+ assert(tzc400.base);
+
+ for (filter = 0; filter < tzc400.num_filters; filter++) {
+ state = _tzc400_get_gate_keeper(tzc400.base, filter);
+ if (state) {
+ /* The TZC filter is already configured. Changing the
+ * programmer's view in an active system can cause
+ * unpredictable behavior therefore panic for now rather
+ * than try to determine whether this is safe in this
+ * instance. See:
+ * http://infocenter.arm.com/help/index.jsp?\
+ * topic=/com.arm.doc.ddi0504c/CJHHECBF.html */
+ ERROR("TZC-400 : Filter %d Gatekeeper already"
+ " enabled.\n", filter);
+ panic();
+ }
+ _tzc400_set_gate_keeper(tzc400.base, filter, 1);
+ }
+}
+
+void tzc400_disable_filters(void)
+{
+ unsigned int filter;
+
+ assert(tzc400.base);
+
+ /*
+ * We don't do the same state check as above as the Gatekeepers are
+ * disabled after reset.
+ */
+ for (filter = 0; filter < tzc400.num_filters; filter++)
+ _tzc400_set_gate_keeper(tzc400.base, filter, 0);
+}
diff --git a/drivers/arm/tzc/tzc_common_private.c b/drivers/arm/tzc/tzc_common_private.c
new file mode 100644
index 0000000..f570daf
--- /dev/null
+++ b/drivers/arm/tzc/tzc_common_private.c
@@ -0,0 +1,202 @@
+/*
+ * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <mmio.h>
+#include <tzc_common.h>
+
+#define DEFINE_TZC_COMMON_WRITE_ACTION(fn_name, macro_name) \
+ static inline void _tzc##fn_name##_write_action( \
+ uintptr_t base, \
+ tzc_action_t action) \
+ { \
+ mmio_write_32(base + TZC_##macro_name##_ACTION_OFF, \
+ action); \
+ }
+
+#define DEFINE_TZC_COMMON_WRITE_REGION_BASE(fn_name, macro_name) \
+ static inline void _tzc##fn_name##_write_region_base( \
+ uintptr_t base, \
+ int region_no, \
+ uintptr_t region_base) \
+ { \
+ mmio_write_32(base + \
+ TZC_REGION_OFFSET( \
+ TZC_##macro_name##_REGION_SIZE, \
+ region_no) + \
+ TZC_##macro_name##_REGION_BASE_LOW_0_OFFSET, \
+ (unsigned int)region_base); \
+ mmio_write_32(base + \
+ TZC_REGION_OFFSET( \
+ TZC_##macro_name##_REGION_SIZE, \
+ region_no) + \
+ TZC_##macro_name##_REGION_BASE_HIGH_0_OFFSET, \
+ (unsigned int)(region_base >> 32)); \
+ }
+
+#define DEFINE_TZC_COMMON_WRITE_REGION_TOP(fn_name, macro_name) \
+ static inline void _tzc##fn_name##_write_region_top( \
+ uintptr_t base, \
+ int region_no, \
+ uintptr_t region_top) \
+ { \
+ mmio_write_32(base + \
+ TZC_REGION_OFFSET \
+ (TZC_##macro_name##_REGION_SIZE, \
+ region_no) + \
+ TZC_##macro_name##_REGION_TOP_LOW_0_OFFSET, \
+ (unsigned int)region_top); \
+ mmio_write_32(base + \
+ TZC_REGION_OFFSET( \
+ TZC_##macro_name##_REGION_SIZE, \
+ region_no) + \
+ TZC_##macro_name##_REGION_TOP_HIGH_0_OFFSET, \
+ (unsigned int)(region_top >> 32)); \
+ }
+
+#define DEFINE_TZC_COMMON_WRITE_REGION_ATTRIBUTES(fn_name, macro_name) \
+ static inline void _tzc##fn_name##_write_region_attributes( \
+ uintptr_t base, \
+ int region_no, \
+ unsigned int attr) \
+ { \
+ mmio_write_32(base + \
+ TZC_REGION_OFFSET( \
+ TZC_##macro_name##_REGION_SIZE, \
+ region_no) + \
+ TZC_##macro_name##_REGION_ATTR_0_OFFSET, \
+ attr); \
+ }
+
+#define DEFINE_TZC_COMMON_WRITE_REGION_ID_ACCESS(fn_name, macro_name) \
+ static inline void _tzc##fn_name##_write_region_id_access( \
+ uintptr_t base, \
+ int region_no, \
+ unsigned int val) \
+ { \
+ mmio_write_32(base + \
+ TZC_REGION_OFFSET( \
+ TZC_##macro_name##_REGION_SIZE, \
+ region_no) + \
+ TZC_##macro_name##_REGION_ID_ACCESS_0_OFFSET, \
+ val); \
+ }
+
+/*
+ * It is used to program region 0 ATTRIBUTES and ACCESS register.
+ */
+#define DEFINE_TZC_COMMON_CONFIGURE_REGION0(fn_name) \
+ void _tzc##fn_name##_configure_region0(uintptr_t base, \
+ tzc_region_attributes_t sec_attr, \
+ unsigned int ns_device_access) \
+ { \
+ assert(base); \
+ VERBOSE("TrustZone : Configuring region 0 " \
+ "(TZC Interface Base=%p sec_attr=0x%x," \
+ " ns_devs=0x%x)\n", (void *)base, \
+ sec_attr, ns_device_access); \
+ \
+ /* Set secure attributes on region 0 */ \
+ _tzc##fn_name##_write_region_attributes(base, 0, \
+ sec_attr << TZC_REGION_ATTR_SEC_SHIFT); \
+ \
+ /***************************************************/ \
+ /* Specify which non-secure devices have permission*/ \
+ /* to access region 0. */ \
+ /***************************************************/ \
+ _tzc##fn_name##_write_region_id_access(base, \
+ 0, \
+ ns_device_access); \
+ }
+
+/*
+ * It is used to program a region from 1 to 8 in the TrustZone controller.
+ * NOTE:
+ * Region 0 is special; it is preferable to use
+ * ##fn_name##_configure_region0 for this region (see comment for
+ * that function).
+ */
+#define DEFINE_TZC_COMMON_CONFIGURE_REGION(fn_name) \
+ void _tzc##fn_name##_configure_region(uintptr_t base, \
+ unsigned int filters, \
+ int region_no, \
+ uintptr_t region_base, \
+ uintptr_t region_top, \
+ tzc_region_attributes_t sec_attr, \
+ unsigned int nsaid_permissions) \
+ { \
+ assert(base); \
+ VERBOSE("TrustZone : Configuring region " \
+ "(TZC Interface Base: %p, region_no = %d)" \
+ "...\n", (void *)base, region_no); \
+ VERBOSE("TrustZone : ... base = %p, top = %p," \
+ "\n", (void *)region_base, (void *)region_top);\
+ VERBOSE("TrustZone : ... sec_attr = 0x%x," \
+ " ns_devs = 0x%x)\n", \
+ sec_attr, nsaid_permissions); \
+ \
+ /***************************************************/ \
+ /* Inputs look ok, start programming registers. */ \
+ /* All the address registers are 32 bits wide and */ \
+ /* have a LOW and HIGH */ \
+ /* component used to construct an address up to a */ \
+ /* 64bit. */ \
+ /***************************************************/ \
+ _tzc##fn_name##_write_region_base(base, \
+ region_no, region_base); \
+ _tzc##fn_name##_write_region_top(base, \
+ region_no, region_top); \
+ \
+ /* Enable filter to the region and set secure attributes */\
+ _tzc##fn_name##_write_region_attributes(base, \
+ region_no, \
+ (sec_attr << TZC_REGION_ATTR_SEC_SHIFT) |\
+ (filters << TZC_REGION_ATTR_F_EN_SHIFT));\
+ \
+ /***************************************************/ \
+ /* Specify which non-secure devices have permission*/ \
+ /* to access this region. */ \
+ /***************************************************/ \
+ _tzc##fn_name##_write_region_id_access(base, \
+ region_no, \
+ nsaid_permissions); \
+ }
+
+#if DEBUG
+static unsigned int _tzc_read_peripheral_id(uintptr_t base)
+{
+ unsigned int id;
+
+ id = mmio_read_32(base + PID0_OFF);
+ /* Masks DESC part in PID1 */
+ id |= ((mmio_read_32(base + PID1_OFF) & 0xF) << 8);
+
+ return id;
+}
+#endif
diff --git a/drivers/arm/tzc/tzc_dmc500.c b/drivers/arm/tzc/tzc_dmc500.c
new file mode 100644
index 0000000..16a53a4
--- /dev/null
+++ b/drivers/arm/tzc/tzc_dmc500.c
@@ -0,0 +1,299 @@
+/*
+ * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <assert.h>
+#include <debug.h>
+#include <mmio.h>
+#include <tzc_dmc500.h>
+#include "tzc_common.h"
+#include "tzc_common_private.c"
+
+/*
+ * Macros which will be used by common core functions.
+ */
+#define TZC_DMC500_REGION_BASE_LOW_0_OFFSET 0x054
+#define TZC_DMC500_REGION_BASE_HIGH_0_OFFSET 0x058
+#define TZC_DMC500_REGION_TOP_LOW_0_OFFSET 0x05C
+#define TZC_DMC500_REGION_TOP_HIGH_0_OFFSET 0x060
+#define TZC_DMC500_REGION_ATTR_0_OFFSET 0x064
+#define TZC_DMC500_REGION_ID_ACCESS_0_OFFSET 0x068
+
+#define TZC_DMC500_ACTION_OFF 0x50
+
+/* Pointer to the tzc_dmc500_driver_data structure populated by the platform */
+static const tzc_dmc500_driver_data_t *g_driver_data;
+
+#define verify_region_attr(region, attr) \
+ ((g_conf_regions[(region)].sec_attr == \
+ ((attr) >> TZC_REGION_ATTR_SEC_SHIFT)) \
+ && ((attr) & (0x1 << TZC_REGION_ATTR_F_EN_SHIFT)))
+
+/*
+ * Structure for configured regions attributes in DMC500.
+ */
+typedef struct tzc_dmc500_regions {
+ tzc_region_attributes_t sec_attr;
+ int is_enabled;
+} tzc_dmc500_regions_t;
+
+/*
+ * Array storing the attributes of the configured regions. This array
+ * will be used by the `tzc_dmc500_verify_complete` to verify the flush
+ * completion.
+ */
+static tzc_dmc500_regions_t g_conf_regions[MAX_REGION_VAL + 1];
+
+/* Helper Macros for making the code readable */
+#define DMC_INST_BASE_ADDR(instance) (g_driver_data->dmc_base[instance])
+#define DMC_INST_SI_BASE(instance, interface) \
+ (DMC_INST_BASE_ADDR(instance) + IFACE_OFFSET(interface))
+
+DEFINE_TZC_COMMON_WRITE_ACTION(_dmc500, DMC500)
+DEFINE_TZC_COMMON_WRITE_REGION_BASE(_dmc500, DMC500)
+DEFINE_TZC_COMMON_WRITE_REGION_TOP(_dmc500, DMC500)
+DEFINE_TZC_COMMON_WRITE_REGION_ATTRIBUTES(_dmc500, DMC500)
+DEFINE_TZC_COMMON_WRITE_REGION_ID_ACCESS(_dmc500, DMC500)
+
+DEFINE_TZC_COMMON_CONFIGURE_REGION0(_dmc500)
+DEFINE_TZC_COMMON_CONFIGURE_REGION(_dmc500)
+
+static inline unsigned int _tzc_dmc500_read_region_attr_0(
+ uintptr_t dmc_si_base,
+ int region_no)
+{
+ return mmio_read_32(dmc_si_base +
+ TZC_REGION_OFFSET(TZC_DMC500_REGION_SIZE, region_no) +
+ TZC_DMC500_REGION_ATTR_0_OFFSET);
+}
+
+static inline void _tzc_dmc500_write_flush_control(uintptr_t dmc_si_base)
+{
+ mmio_write_32(dmc_si_base + SI_FLUSH_CTRL_OFFSET, 1);
+}
+
+/*
+ * Sets the Flush controls for all the DMC Instances and System Interfaces.
+ * This initiates the flush of configuration settings from the shadow
+ * registers to the actual configuration register. The caller should poll
+ * changed register to confirm update.
+ */
+void tzc_dmc500_config_complete(void)
+{
+ int dmc_inst, sys_if;
+
+ assert(g_driver_data);
+
+ for (dmc_inst = 0; dmc_inst < g_driver_data->dmc_count; dmc_inst++) {
+ assert(DMC_INST_BASE_ADDR(dmc_inst));
+ for (sys_if = 0; sys_if < MAX_SYS_IF_COUNT; sys_if++)
+ _tzc_dmc500_write_flush_control(
+ DMC_INST_SI_BASE(dmc_inst, sys_if));
+ }
+}
+
+/*
+ * This function reads back the secure attributes from the configuration
+ * register for each DMC Instance and System Interface and compares it with
+ * the configured value. The successful verification of the region attributes
+ * confirms that the flush operation has completed.
+ * If the verification fails, the caller is expected to invoke this API again
+ * till it succeeds.
+ * Returns 0 on success and 1 on failure.
+ */
+int tzc_dmc500_verify_complete(void)
+{
+ int dmc_inst, sys_if, region_no;
+ unsigned int attr;
+
+ assert(g_driver_data);
+ /* Region 0 must be configured */
+ assert(g_conf_regions[0].is_enabled);
+
+ /* Iterate over all configured regions */
+ for (region_no = 0; region_no <= MAX_REGION_VAL; region_no++) {
+ if (!g_conf_regions[region_no].is_enabled)
+ continue;
+ for (dmc_inst = 0; dmc_inst < g_driver_data->dmc_count;
+ dmc_inst++) {
+ assert(DMC_INST_BASE_ADDR(dmc_inst));
+ for (sys_if = 0; sys_if < MAX_SYS_IF_COUNT;
+ sys_if++) {
+ attr = _tzc_dmc500_read_region_attr_0(
+ DMC_INST_SI_BASE(dmc_inst, sys_if),
+ region_no);
+ VERBOSE("Verifying DMC500 region:%d"
+ " dmc_inst:%d sys_if:%d attr:%x\n",
+ region_no, dmc_inst, sys_if, attr);
+ if (!verify_region_attr(region_no, attr))
+ return 1;
+ }
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * `tzc_dmc500_configure_region0` is used to program region 0 in both the
+ * system interfaces of all the DMC-500 instances. Region 0 covers the whole
+ * address space that is not mapped to any other region for a system interface,
+ * and is always enabled; this cannot be changed. This function only changes
+ * the access permissions.
+ */
+void tzc_dmc500_configure_region0(tzc_region_attributes_t sec_attr,
+ unsigned int nsaid_permissions)
+{
+ int dmc_inst, sys_if;
+
+ /* Assert if DMC-500 is not initialized */
+ assert(g_driver_data);
+
+ /* Configure region_0 in all DMC instances */
+ for (dmc_inst = 0; dmc_inst < g_driver_data->dmc_count; dmc_inst++) {
+ assert(DMC_INST_BASE_ADDR(dmc_inst));
+ for (sys_if = 0; sys_if < MAX_SYS_IF_COUNT; sys_if++)
+ _tzc_dmc500_configure_region0(
+ DMC_INST_SI_BASE(dmc_inst, sys_if),
+ sec_attr, nsaid_permissions);
+ }
+
+ g_conf_regions[0].sec_attr = sec_attr;
+ g_conf_regions[0].is_enabled = 1;
+}
+
+/*
+ * `tzc_dmc500_configure_region` is used to program a region into all system
+ * interfaces of all the DMC instances.
+ * NOTE:
+ * Region 0 is special; it is preferable to use tzc_dmc500_configure_region0
+ * for this region (see comment for that function).
+ */
+void tzc_dmc500_configure_region(int region_no,
+ uintptr_t region_base,
+ uintptr_t region_top,
+ tzc_region_attributes_t sec_attr,
+ unsigned int nsaid_permissions)
+{
+ int dmc_inst, sys_if;
+
+ assert(g_driver_data);
+ /* Do range checks on regions. */
+ assert(region_no >= 0 && region_no <= MAX_REGION_VAL);
+
+ /*
+ * Do address range check based on DMC-TZ configuration. A 43bit address
+ * is the max and expected case.
+ */
+ assert(((region_top <= (UINT64_MAX >> (64 - 43))) &&
+ (region_base < region_top)));
+
+ /* region_base and (region_top + 1) must be 4KB aligned */
+ assert(((region_base | (region_top + 1)) & (4096 - 1)) == 0);
+
+ for (dmc_inst = 0; dmc_inst < g_driver_data->dmc_count; dmc_inst++) {
+ assert(DMC_INST_BASE_ADDR(dmc_inst));
+ for (sys_if = 0; sys_if < MAX_SYS_IF_COUNT; sys_if++)
+ _tzc_dmc500_configure_region(
+ DMC_INST_SI_BASE(dmc_inst, sys_if),
+ TZC_DMC500_REGION_ATTR_F_EN_MASK,
+ region_no, region_base, region_top,
+ sec_attr, nsaid_permissions);
+ }
+
+ g_conf_regions[region_no].sec_attr = sec_attr;
+ g_conf_regions[region_no].is_enabled = 1;
+}
+
+/* Sets the action value for all the DMC instances */
+void tzc_dmc500_set_action(tzc_action_t action)
+{
+ int dmc_inst;
+
+ assert(g_driver_data);
+
+ for (dmc_inst = 0; dmc_inst < g_driver_data->dmc_count; dmc_inst++) {
+ assert(DMC_INST_BASE_ADDR(dmc_inst));
+ /*
+ * - Currently no handler is provided to trap an error via
+ * interrupt or exception.
+ * - The interrupt action has not been tested.
+ */
+ _tzc_dmc500_write_action(DMC_INST_BASE_ADDR(dmc_inst), action);
+ }
+}
+
+/*
+ * A DMC-500 instance must be present at each base address provided by the
+ * platform. It also expects platform to pass at least one instance of
+ * DMC-500.
+ */
+static void validate_plat_driver_data(
+ const tzc_dmc500_driver_data_t *plat_driver_data)
+{
+#if DEBUG
+ int i;
+ unsigned int dmc_id;
+ uintptr_t dmc_base;
+
+ assert(plat_driver_data);
+ assert(plat_driver_data->dmc_count > 0 &&
+ (plat_driver_data->dmc_count <= MAX_DMC_COUNT));
+
+ for (i = 0; i < plat_driver_data->dmc_count; i++) {
+ dmc_base = plat_driver_data->dmc_base[i];
+ assert(dmc_base);
+
+ dmc_id = _tzc_read_peripheral_id(dmc_base);
+ assert(dmc_id == DMC500_PERIPHERAL_ID);
+ }
+#endif /* DEBUG */
+}
+
+
+/*
+ * Initializes the base address and count of DMC instances.
+ *
+ * Note : Only pointer to plat_driver_data is saved, so it is caller's
+ * responsibility to keep it valid until the driver is used.
+ */
+void tzc_dmc500_driver_init(const tzc_dmc500_driver_data_t *plat_driver_data)
+{
+ /* Check valid pointer is passed */
+ assert(plat_driver_data);
+
+ /*
+ * NOTE: This driver expects the DMC-500 controller is already in
+ * READY state. Hence, it uses the reconfiguration method for
+ * programming TrustZone regions
+ */
+ /* Validates the information passed by platform */
+ validate_plat_driver_data(plat_driver_data);
+ g_driver_data = plat_driver_data;
+}
diff --git a/drivers/arm/tzc400/tzc400.c b/drivers/arm/tzc400/tzc400.c
index 7194443..97adf81 100644
--- a/drivers/arm/tzc400/tzc400.c
+++ b/drivers/arm/tzc400/tzc400.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2014-2015, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2014-2016, ARM Limited and Contributors. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
@@ -28,313 +28,8 @@
* POSSIBILITY OF SUCH DAMAGE.
*/
-#include <assert.h>
-#include <debug.h>
-#include <mmio.h>
-#include <stddef.h>
-#include <tzc400.h>
-
-/*
- * Implementation defined values used to validate inputs later.
- * Filters : max of 4 ; 0 to 3
- * Regions : max of 9 ; 0 to 8
- * Address width : Values between 32 to 64
- */
-typedef struct tzc_instance {
- uintptr_t base;
- uint8_t addr_width;
- uint8_t num_filters;
- uint8_t num_regions;
-} tzc_instance_t;
-
-tzc_instance_t tzc;
-
-
-static inline uint32_t tzc_read_build_config(uintptr_t base)
-{
- return mmio_read_32(base + BUILD_CONFIG_OFF);
-}
-
-static inline uint32_t tzc_read_gate_keeper(uintptr_t base)
-{
- return mmio_read_32(base + GATE_KEEPER_OFF);
-}
-
-static inline void tzc_write_gate_keeper(uintptr_t base, uint32_t val)
-{
- mmio_write_32(base + GATE_KEEPER_OFF, val);
-}
-
-static inline void tzc_write_action(uintptr_t base, tzc_action_t action)
-{
- mmio_write_32(base + ACTION_OFF, action);
-}
-
-static inline void tzc_write_region_base_low(uintptr_t base,
- uint32_t region,
- uint32_t val)
-{
- mmio_write_32(base + REGION_BASE_LOW_OFF +
- REGION_NUM_OFF(region), val);
-}
-
-static inline void tzc_write_region_base_high(uintptr_t base,
- uint32_t region,
- uint32_t val)
-{
- mmio_write_32(base + REGION_BASE_HIGH_OFF +
- REGION_NUM_OFF(region), val);
-}
-
-static inline void tzc_write_region_top_low(uintptr_t base,
- uint32_t region,
- uint32_t val)
-{
- mmio_write_32(base + REGION_TOP_LOW_OFF +
- REGION_NUM_OFF(region), val);
-}
-
-static inline void tzc_write_region_top_high(uintptr_t base,
- uint32_t region,
- uint32_t val)
-{
- mmio_write_32(base + REGION_TOP_HIGH_OFF +
- REGION_NUM_OFF(region), val);
-}
-
-static inline void tzc_write_region_attributes(uintptr_t base,
- uint32_t region,
- uint32_t val)
-{
- mmio_write_32(base + REGION_ATTRIBUTES_OFF +
- REGION_NUM_OFF(region), val);
-}
-
-static inline void tzc_write_region_id_access(uintptr_t base,
- uint32_t region,
- uint32_t val)
-{
- mmio_write_32(base + REGION_ID_ACCESS_OFF +
- REGION_NUM_OFF(region), val);
-}
-
-static unsigned int tzc_read_peripheral_id(uintptr_t base)
-{
- unsigned int id;
-
- id = mmio_read_8(base + PID0_OFF);
- /* Masks jep106_id_3_0 part in PID1 */
- id |= ((mmio_read_8(base + PID1_OFF) & 0xF) << 8);
-
- return id;
-}
-
-static uint32_t tzc_get_gate_keeper(uintptr_t base, uint8_t filter)
-{
- uint32_t tmp;
-
- tmp = (tzc_read_gate_keeper(base) >> GATE_KEEPER_OS_SHIFT) &
- GATE_KEEPER_OS_MASK;
-
- return (tmp >> filter) & GATE_KEEPER_FILTER_MASK;
-}
-
-/* This function is not MP safe. */
-static void tzc_set_gate_keeper(uintptr_t base, uint8_t filter, uint32_t val)
-{
- uint32_t tmp;
-
- /* Upper half is current state. Lower half is requested state. */
- tmp = (tzc_read_gate_keeper(base) >> GATE_KEEPER_OS_SHIFT) &
- GATE_KEEPER_OS_MASK;
-
- if (val)
- tmp |= (1 << filter);
- else
- tmp &= ~(1 << filter);
-
- tzc_write_gate_keeper(base, (tmp & GATE_KEEPER_OR_MASK) <<
- GATE_KEEPER_OR_SHIFT);
-
- /* Wait here until we see the change reflected in the TZC status. */
- while (((tzc_read_gate_keeper(base) >> GATE_KEEPER_OS_SHIFT) &
- GATE_KEEPER_OS_MASK) != tmp)
- ;
-}
-
-
-void tzc_init(uintptr_t base)
-{
- unsigned int tzc_id;
- unsigned int tzc_build;
-
- assert(base);
-
- tzc.base = base;
-
- /*
- * We expect to see a tzc400. Check peripheral ID.
- */
- tzc_id = tzc_read_peripheral_id(tzc.base);
- if (tzc_id != TZC400_PERIPHERAL_ID) {
- ERROR("TZC : Wrong device ID (0x%x).\n", tzc_id);
- panic();
- }
-
- /* Save values we will use later. */
- tzc_build = tzc_read_build_config(tzc.base);
- tzc.num_filters = ((tzc_build >> BUILD_CONFIG_NF_SHIFT) &
- BUILD_CONFIG_NF_MASK) + 1;
- tzc.addr_width = ((tzc_build >> BUILD_CONFIG_AW_SHIFT) &
- BUILD_CONFIG_AW_MASK) + 1;
- tzc.num_regions = ((tzc_build >> BUILD_CONFIG_NR_SHIFT) &
- BUILD_CONFIG_NR_MASK) + 1;
-}
-
-/*
- * `tzc_configure_region0` is used to program region 0 into the TrustZone
- * controller. Region 0 covers the whole address space that is not mapped
- * to any other region, and is enabled on all filters; this cannot be
- * changed. This function only changes the access permissions.
- */
-void tzc_configure_region0(tzc_region_attributes_t sec_attr,
- uint32_t ns_device_access)
-{
- assert(tzc.base);
-
- VERBOSE("TZC : Configuring region 0 (sec_attr=0x%x, ns_devs=0x%x)\n",
- sec_attr, ns_device_access);
-
- assert(sec_attr <= TZC_REGION_S_RDWR);
-
- /* Set secure attributes on region 0 */
- tzc_write_region_attributes(tzc.base, 0,
- sec_attr << REG_ATTR_SEC_SHIFT);
-
- /*
- * Specify which non-secure devices have permission to access
- * region 0.
- */
- tzc_write_region_id_access(tzc.base, 0, ns_device_access);
-}
-
-
-/*
- * `tzc_configure_region` is used to program regions into the TrustZone
- * controller. A region can be associated with more than one filter. The
- * associated filters are passed in as a bitmap (bit0 = filter0).
- * NOTE:
- * Region 0 is special; it is preferable to use tzc_configure_region0
- * for this region (see comment for that function).
- */
-void tzc_configure_region(uint32_t filters,
- uint8_t region,
- uint64_t region_base,
- uint64_t region_top,
- tzc_region_attributes_t sec_attr,
- uint32_t ns_device_access)
-{
- assert(tzc.base);
-
- VERBOSE("TZC : Configuring region (filters=0x%x, region=%d, ...\n",
- filters, region);
- VERBOSE("TZC : ... base=0x%lx, top=0x%lx, ...\n",
- region_base, region_top);
- VERBOSE("TZC : ... sec_attr=0x%x, ns_devs=0x%x)\n",
- sec_attr, ns_device_access);
-
- /* Do range checks on filters and regions. */
- assert(((filters >> tzc.num_filters) == 0) &&
- (region < tzc.num_regions));
-
- /*
- * Do address range check based on TZC configuration. A 64bit address is
- * the max and expected case.
- */
- assert(((region_top <= (UINT64_MAX >> (64 - tzc.addr_width))) &&
- (region_base < region_top)));
-
- /* region_base and (region_top + 1) must be 4KB aligned */
- assert(((region_base | (region_top + 1)) & (4096 - 1)) == 0);
-
- assert(sec_attr <= TZC_REGION_S_RDWR);
-
- /*
- * Inputs look ok, start programming registers.
- * All the address registers are 32 bits wide and have a LOW and HIGH
- * component used to construct a up to a 64bit address.
- */
- tzc_write_region_base_low(tzc.base, region,
- (uint32_t)(region_base));
- tzc_write_region_base_high(tzc.base, region,
- (uint32_t)(region_base >> 32));
-
- tzc_write_region_top_low(tzc.base, region,
- (uint32_t)(region_top));
- tzc_write_region_top_high(tzc.base, region,
- (uint32_t)(region_top >> 32));
-
- /* Assign the region to a filter and set secure attributes */
- tzc_write_region_attributes(tzc.base, region,
- (sec_attr << REG_ATTR_SEC_SHIFT) | filters);
-
- /*
- * Specify which non-secure devices have permission to access this
- * region.
- */
- tzc_write_region_id_access(tzc.base, region, ns_device_access);
-}
-
-
-void tzc_set_action(tzc_action_t action)
-{
- assert(tzc.base);
-
- /*
- * - Currently no handler is provided to trap an error via interrupt
- * or exception.
- * - The interrupt action has not been tested.
- */
- tzc_write_action(tzc.base, action);
-}
-
-
-void tzc_enable_filters(void)
-{
- uint32_t state;
- uint32_t filter;
-
- assert(tzc.base);
-
- for (filter = 0; filter < tzc.num_filters; filter++) {
- state = tzc_get_gate_keeper(tzc.base, filter);
- if (state) {
- /* The TZC filter is already configured. Changing the
- * programmer's view in an active system can cause
- * unpredictable behavior therefore panic for now rather
- * than try to determine whether this is safe in this
- * instance. See:
- * http://infocenter.arm.com/help/index.jsp?\
- * topic=/com.arm.doc.ddi0504c/CJHHECBF.html */
- ERROR("TZC : Filter %d Gatekeeper already enabled.\n",
- filter);
- panic();
- }
- tzc_set_gate_keeper(tzc.base, filter, 1);
- }
-}
-
-
-void tzc_disable_filters(void)
-{
- uint32_t filter;
-
- assert(tzc.base);
-
- /*
- * We don't do the same state check as above as the Gatekeepers are
- * disabled after reset.
- */
- for (filter = 0; filter < tzc.num_filters; filter++)
- tzc_set_gate_keeper(tzc.base, filter, 0);
-}
+#if ERROR_DEPRECATED
+#error "Using deprecated TZC-400 source file"
+#else
+#include "../tzc/tzc400.c"
+#endif /* ERROR_DEPRECATED */
diff --git a/include/drivers/arm/tzc400.h b/include/drivers/arm/tzc400.h
index f8e1664..3085688 100644
--- a/include/drivers/arm/tzc400.h
+++ b/include/drivers/arm/tzc400.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2014-2015, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2014-2016, ARM Limited and Contributors. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
@@ -31,178 +31,179 @@
#ifndef __TZC400_H__
#define __TZC400_H__
+#include <tzc_common.h>
-#define BUILD_CONFIG_OFF 0x000
-#define ACTION_OFF 0x004
-#define GATE_KEEPER_OFF 0x008
-#define SPECULATION_CTRL_OFF 0x00c
-#define INT_STATUS 0x010
-#define INT_CLEAR 0x014
+#define BUILD_CONFIG_OFF 0x000
+#define GATE_KEEPER_OFF 0x008
+#define SPECULATION_CTRL_OFF 0x00c
+#define INT_STATUS 0x010
+#define INT_CLEAR 0x014
-#define FAIL_ADDRESS_LOW_OFF 0x020
-#define FAIL_ADDRESS_HIGH_OFF 0x024
-#define FAIL_CONTROL_OFF 0x028
-#define FAIL_ID 0x02c
+#define FAIL_ADDRESS_LOW_OFF 0x020
+#define FAIL_ADDRESS_HIGH_OFF 0x024
+#define FAIL_CONTROL_OFF 0x028
+#define FAIL_ID 0x02c
-#define REGION_BASE_LOW_OFF 0x100
-#define REGION_BASE_HIGH_OFF 0x104
-#define REGION_TOP_LOW_OFF 0x108
-#define REGION_TOP_HIGH_OFF 0x10c
-#define REGION_ATTRIBUTES_OFF 0x110
-#define REGION_ID_ACCESS_OFF 0x114
-#define REGION_NUM_OFF(region) (0x20 * region)
+/* ID registers not common across different varieties of TZC */
+#define PID5 0xFD4
+#define PID6 0xFD8
+#define PID7 0xFDC
-/* ID Registers */
-#define PID0_OFF 0xfe0
-#define PID1_OFF 0xfe4
-#define PID2_OFF 0xfe8
-#define PID3_OFF 0xfec
-#define PID4_OFF 0xfd0
-#define PID5_OFF 0xfd4
-#define PID6_OFF 0xfd8
-#define PID7_OFF 0xfdc
-#define CID0_OFF 0xff0
-#define CID1_OFF 0xff4
-#define CID2_OFF 0xff8
-#define CID3_OFF 0xffc
-
-#define BUILD_CONFIG_NF_SHIFT 24
-#define BUILD_CONFIG_NF_MASK 0x3
-#define BUILD_CONFIG_AW_SHIFT 8
-#define BUILD_CONFIG_AW_MASK 0x3f
-#define BUILD_CONFIG_NR_SHIFT 0
-#define BUILD_CONFIG_NR_MASK 0x1f
-
-/* Not describing the case where regions 1 to 8 overlap */
-#define ACTION_RV_SHIFT 0
-#define ACTION_RV_MASK 0x3
-#define ACTION_RV_LOWOK 0x0
-#define ACTION_RV_LOWERR 0x1
-#define ACTION_RV_HIGHOK 0x2
-#define ACTION_RV_HIGHERR 0x3
+#define BUILD_CONFIG_NF_SHIFT 24
+#define BUILD_CONFIG_NF_MASK 0x3
+#define BUILD_CONFIG_AW_SHIFT 8
+#define BUILD_CONFIG_AW_MASK 0x3f
+#define BUILD_CONFIG_NR_SHIFT 0
+#define BUILD_CONFIG_NR_MASK 0x1f
/*
* Number of gate keepers is implementation defined. But we know the max for
* this device is 4. Get implementation details from BUILD_CONFIG.
*/
-#define GATE_KEEPER_OS_SHIFT 16
-#define GATE_KEEPER_OS_MASK 0xf
-#define GATE_KEEPER_OR_SHIFT 0
-#define GATE_KEEPER_OR_MASK 0xf
-#define GATE_KEEPER_FILTER_MASK 0x1
+#define GATE_KEEPER_OS_SHIFT 16
+#define GATE_KEEPER_OS_MASK 0xf
+#define GATE_KEEPER_OR_SHIFT 0
+#define GATE_KEEPER_OR_MASK 0xf
+#define GATE_KEEPER_FILTER_MASK 0x1
/* Speculation is enabled by default. */
-#define SPECULATION_CTRL_WRITE_DISABLE (1 << 1)
-#define SPECULATION_CTRL_READ_DISABLE (1 << 0)
+#define SPECULATION_CTRL_WRITE_DISABLE (1 << 1)
+#define SPECULATION_CTRL_READ_DISABLE (1 << 0)
/* Max number of filters allowed is 4. */
-#define INT_STATUS_OVERLAP_SHIFT 16
-#define INT_STATUS_OVERLAP_MASK 0xf
-#define INT_STATUS_OVERRUN_SHIFT 8
-#define INT_STATUS_OVERRUN_MASK 0xf
-#define INT_STATUS_STATUS_SHIFT 0
-#define INT_STATUS_STATUS_MASK 0xf
+#define INT_STATUS_OVERLAP_SHIFT 16
+#define INT_STATUS_OVERLAP_MASK 0xf
+#define INT_STATUS_OVERRUN_SHIFT 8
+#define INT_STATUS_OVERRUN_MASK 0xf
+#define INT_STATUS_STATUS_SHIFT 0
+#define INT_STATUS_STATUS_MASK 0xf
-#define INT_CLEAR_CLEAR_SHIFT 0
-#define INT_CLEAR_CLEAR_MASK 0xf
+#define INT_CLEAR_CLEAR_SHIFT 0
+#define INT_CLEAR_CLEAR_MASK 0xf
-#define FAIL_CONTROL_DIR_SHIFT (1 << 24)
-#define FAIL_CONTROL_DIR_READ 0x0
-#define FAIL_CONTROL_DIR_WRITE 0x1
-#define FAIL_CONTROL_NS_SHIFT (1 << 21)
-#define FAIL_CONTROL_NS_SECURE 0x0
-#define FAIL_CONTROL_NS_NONSECURE 0x1
-#define FAIL_CONTROL_PRIV_SHIFT (1 << 20)
-#define FAIL_CONTROL_PRIV_PRIV 0x0
-#define FAIL_CONTROL_PRIV_UNPRIV 0x1
+#define FAIL_CONTROL_DIR_SHIFT (1 << 24)
+#define FAIL_CONTROL_DIR_READ 0x0
+#define FAIL_CONTROL_DIR_WRITE 0x1
+#define FAIL_CONTROL_NS_SHIFT (1 << 21)
+#define FAIL_CONTROL_NS_SECURE 0x0
+#define FAIL_CONTROL_NS_NONSECURE 0x1
+#define FAIL_CONTROL_PRIV_SHIFT (1 << 20)
+#define FAIL_CONTROL_PRIV_PRIV 0x0
+#define FAIL_CONTROL_PRIV_UNPRIV 0x1
/*
* FAIL_ID_ID_MASK depends on AID_WIDTH which is platform specific.
* Platform should provide the value on initialisation.
*/
-#define FAIL_ID_VNET_SHIFT 24
-#define FAIL_ID_VNET_MASK 0xf
-#define FAIL_ID_ID_SHIFT 0
-
-/* Used along with 'tzc_region_attributes_t' below */
-#define REG_ATTR_SEC_SHIFT 30
-#define REG_ATTR_F_EN_SHIFT 0
-#define REG_ATTR_F_EN_MASK 0xf
-#define REG_ATTR_FILTER_BIT(x) ((1 << x) << REG_ATTR_F_EN_SHIFT)
-#define REG_ATTR_FILTER_BIT_ALL (REG_ATTR_F_EN_MASK << \
- REG_ATTR_F_EN_SHIFT)
+#define FAIL_ID_VNET_SHIFT 24
+#define FAIL_ID_VNET_MASK 0xf
+#define FAIL_ID_ID_SHIFT 0
-#define REGION_ID_ACCESS_NSAID_WR_EN_SHIFT 16
-#define REGION_ID_ACCESS_NSAID_RD_EN_SHIFT 0
-#define REGION_ID_ACCESS_NSAID_ID_MASK 0xf
+#define TZC_400_PERIPHERAL_ID 0x460
+/* Filter enable bits in a TZC */
+#define TZC_400_REGION_ATTR_F_EN_MASK 0xf
+#define TZC_400_REGION_ATTR_FILTER_BIT(x) ((1 << x) \
+ << TZC_REGION_ATTR_F_EN_SHIFT)
+#define TZC_400_REGION_ATTR_FILTER_BIT_ALL \
+ (TZC_400_REGION_ATTR_F_EN_MASK << \
+ TZC_REGION_ATTR_F_EN_SHIFT)
-/* Macros for setting Region ID access permissions based on NSAID */
-#define TZC_REGION_ACCESS_RD(id) \
- ((1 << (id & REGION_ID_ACCESS_NSAID_ID_MASK)) << \
- REGION_ID_ACCESS_NSAID_RD_EN_SHIFT)
-#define TZC_REGION_ACCESS_WR(id) \
- ((1 << (id & REGION_ID_ACCESS_NSAID_ID_MASK)) << \
- REGION_ID_ACCESS_NSAID_WR_EN_SHIFT)
-#define TZC_REGION_ACCESS_RDWR(id) \
- (TZC_REGION_ACCESS_RD(id) | TZC_REGION_ACCESS_WR(id))
-
-/* Consist of part_number_1 and part_number_0 */
-#define TZC400_PERIPHERAL_ID 0x0460
-
+/*
+ * Define some macros for backward compatibility with existing tzc400 clients.
+ */
+#if !ERROR_DEPRECATED
+#define REG_ATTR_FILTER_BIT(x) ((1 << x) \
+ << TZC_REGION_ATTR_F_EN_SHIFT)
+#define REG_ATTR_FILTER_BIT_ALL (TZC_400_REGION_ATTR_F_EN_MASK << \
+ TZC_REGION_ATTR_F_EN_SHIFT)
+#endif /* __ERROR_DEPRECATED__ */
+/*
+ * All TZC region configuration registers are placed one after another. It
+ * depicts size of block of registers for programming each region.
+ */
+#define TZC_400_REGION_SIZE 0x20
+#define TZC_400_ACTION_OFF 0x4
#ifndef __ASSEMBLY__
+#include <cdefs.h>
#include <stdint.h>
/*******************************************************************************
* Function & variable prototypes
******************************************************************************/
+void tzc400_init(uintptr_t base);
+void tzc400_configure_region0(tzc_region_attributes_t sec_attr,
+ unsigned int ns_device_access);
+void tzc400_configure_region(unsigned int filters,
+ int region,
+ uintptr_t region_base,
+ uintptr_t region_top,
+ tzc_region_attributes_t sec_attr,
+ unsigned int ns_device_access);
+void tzc400_set_action(tzc_action_t action);
+void tzc400_enable_filters(void);
+void tzc400_disable_filters(void);
/*
- * What type of action is expected when an access violation occurs.
- * The memory requested is zeroed. But we can also raise and event to
- * let the system know it happened.
- * We can raise an interrupt(INT) and/or cause an exception(ERR).
- * TZC_ACTION_NONE - No interrupt, no Exception
- * TZC_ACTION_ERR - No interrupt, raise exception -> sync external
- * data abort
- * TZC_ACTION_INT - Raise interrupt, no exception
- * TZC_ACTION_ERR_INT - Raise interrupt, raise exception -> sync
- * external data abort
+ * Deprecated APIs
*/
-typedef enum {
- TZC_ACTION_NONE = 0,
- TZC_ACTION_ERR = 1,
- TZC_ACTION_INT = 2,
- TZC_ACTION_ERR_INT = (TZC_ACTION_ERR | TZC_ACTION_INT)
-} tzc_action_t;
-
-/*
- * Controls secure access to a region. If not enabled secure access is not
- * allowed to region.
- */
-typedef enum {
- TZC_REGION_S_NONE = 0,
- TZC_REGION_S_RD = 1,
- TZC_REGION_S_WR = 2,
- TZC_REGION_S_RDWR = (TZC_REGION_S_RD | TZC_REGION_S_WR)
-} tzc_region_attributes_t;
+static inline void tzc_init(uintptr_t base) __deprecated;
+static inline void tzc_configure_region0(
+ tzc_region_attributes_t sec_attr,
+ unsigned int ns_device_access) __deprecated;
+static inline void tzc_configure_region(
+ unsigned int filters,
+ int region,
+ uintptr_t region_base,
+ uintptr_t region_top,
+ tzc_region_attributes_t sec_attr,
+ unsigned int ns_device_access) __deprecated;
+static inline void tzc_set_action(tzc_action_t action) __deprecated;
+static inline void tzc_enable_filters(void) __deprecated;
+static inline void tzc_disable_filters(void) __deprecated;
+static inline void tzc_init(uintptr_t base)
+{
+ tzc400_init(base);
+}
-void tzc_init(uintptr_t base);
-void tzc_configure_region0(tzc_region_attributes_t sec_attr,
- uint32_t ns_device_access);
-void tzc_configure_region(uint32_t filters,
- uint8_t region,
- uint64_t region_base,
- uint64_t region_top,
+static inline void tzc_configure_region0(
tzc_region_attributes_t sec_attr,
- uint32_t ns_device_access);
-void tzc_enable_filters(void);
-void tzc_disable_filters(void);
-void tzc_set_action(tzc_action_t action);
+ unsigned int ns_device_access)
+{
+ tzc400_configure_region0(sec_attr, ns_device_access);
+}
+
+static inline void tzc_configure_region(
+ unsigned int filters,
+ int region,
+ uintptr_t region_base,
+ uintptr_t region_top,
+ tzc_region_attributes_t sec_attr,
+ unsigned int ns_device_access)
+{
+ tzc400_configure_region(filters, region, region_base,
+ region_top, sec_attr, ns_device_access);
+}
+
+static inline void tzc_set_action(tzc_action_t action)
+{
+ tzc400_set_action(action);
+}
+
+
+static inline void tzc_enable_filters(void)
+{
+ tzc400_enable_filters();
+}
+
+static inline void tzc_disable_filters(void)
+{
+ tzc400_disable_filters();
+}
#endif /* __ASSEMBLY__ */
diff --git a/include/drivers/arm/tzc_common.h b/include/drivers/arm/tzc_common.h
new file mode 100644
index 0000000..9b73c3f
--- /dev/null
+++ b/include/drivers/arm/tzc_common.h
@@ -0,0 +1,119 @@
+/*
+ * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __TZC_COMMON_H__
+#define __TZC_COMMON_H__
+
+/*
+ * Offset of core registers from the start of the base of configuration
+ * registers for each region.
+ */
+
+/* ID Registers */
+#define PID0_OFF 0xfe0
+#define PID1_OFF 0xfe4
+#define PID2_OFF 0xfe8
+#define PID3_OFF 0xfec
+#define PID4_OFF 0xfd0
+#define CID0_OFF 0xff0
+#define CID1_OFF 0xff4
+#define CID2_OFF 0xff8
+#define CID3_OFF 0xffc
+
+/* Bit positions of TZC_ACTION registers */
+#define TZC_ACTION_RV_SHIFT 0
+#define TZC_ACTION_RV_MASK 0x3
+#define TZC_ACTION_RV_LOWOK 0x0
+#define TZC_ACTION_RV_LOWERR 0x1
+#define TZC_ACTION_RV_HIGHOK 0x2
+#define TZC_ACTION_RV_HIGHERR 0x3
+
+/* Used along with 'tzc_region_attributes_t' below */
+#define TZC_REGION_ATTR_S_RD_SHIFT 30
+#define TZC_REGION_ATTR_S_WR_SHIFT 31
+#define TZC_REGION_ATTR_F_EN_SHIFT 0
+#define TZC_REGION_ATTR_SEC_SHIFT 30
+#define TZC_REGION_ATTR_S_RD_MASK 0x1
+#define TZC_REGION_ATTR_S_WR_MASK 0x1
+#define TZC_REGION_ATTR_SEC_MASK 0x3
+
+#define TZC_REGION_ACCESS_WR_EN_SHIFT 16
+#define TZC_REGION_ACCESS_RD_EN_SHIFT 0
+#define TZC_REGION_ACCESS_ID_MASK 0xf
+
+/* Macros for allowing Non-Secure access to a region based on NSAID */
+#define TZC_REGION_ACCESS_RD(nsaid) \
+ ((1 << (nsaid & TZC_REGION_ACCESS_ID_MASK)) << \
+ TZC_REGION_ACCESS_RD_EN_SHIFT)
+#define TZC_REGION_ACCESS_WR(nsaid) \
+ ((1 << (nsaid & TZC_REGION_ACCESS_ID_MASK)) << \
+ TZC_REGION_ACCESS_WR_EN_SHIFT)
+#define TZC_REGION_ACCESS_RDWR(nsaid) \
+ (TZC_REGION_ACCESS_RD(nsaid) | \
+ TZC_REGION_ACCESS_WR(nsaid))
+
+#ifndef __ASSEMBLY__
+
+/* Returns offset of registers to program for a given region no */
+#define TZC_REGION_OFFSET(region_size, region_no) \
+ ((region_size) * (region_no))
+
+/*
+ * What type of action is expected when an access violation occurs.
+ * The memory requested is returned as zero. But we can also raise an event to
+ * let the system know it happened.
+ * We can raise an interrupt(INT) and/or cause an exception(ERR).
+ * TZC_ACTION_NONE - No interrupt, no Exception
+ * TZC_ACTION_ERR - No interrupt, raise exception -> sync external
+ * data abort
+ * TZC_ACTION_INT - Raise interrupt, no exception
+ * TZC_ACTION_ERR_INT - Raise interrupt, raise exception -> sync
+ * external data abort
+ */
+typedef enum {
+ TZC_ACTION_NONE = 0,
+ TZC_ACTION_ERR = 1,
+ TZC_ACTION_INT = 2,
+ TZC_ACTION_ERR_INT = (TZC_ACTION_ERR | TZC_ACTION_INT)
+} tzc_action_t;
+
+/*
+ * Controls secure access to a region. If not enabled secure access is not
+ * allowed to region.
+ */
+typedef enum {
+ TZC_REGION_S_NONE = 0,
+ TZC_REGION_S_RD = 1,
+ TZC_REGION_S_WR = 2,
+ TZC_REGION_S_RDWR = (TZC_REGION_S_RD | TZC_REGION_S_WR)
+} tzc_region_attributes_t;
+
+#endif /* __ASSEMBLY__ */
+#endif /* __TZC_COMMON_H__ */
diff --git a/include/drivers/arm/tzc_dmc500.h b/include/drivers/arm/tzc_dmc500.h
new file mode 100644
index 0000000..70f8ad2
--- /dev/null
+++ b/include/drivers/arm/tzc_dmc500.h
@@ -0,0 +1,174 @@
+/*
+ * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __TZC_DMC500_H__
+#define __TZC_DMC500_H__
+
+#include <tzc_common.h>
+
+#define SI_STATUS_OFFSET 0x000
+#define SI_STATE_CTRL_OFFSET 0x030
+#define SI_FLUSH_CTRL_OFFSET 0x034
+#define SI_INT_CONTROL_OFFSET 0x048
+
+#define SI_INT_STATUS_OFFSET 0x004
+#define SI_TZ_FAIL_ADDRESS_LOW_OFFSET 0x008
+#define SI_TZ_FAIL_ADDRESS_HIGH_OFFSET 0x00c
+#define SI_FAIL_CONTROL_OFFSET 0x010
+#define SI_FAIL_ID_OFFSET 0x014
+#define SI_INT_CLR_OFFSET 0x04c
+
+/*
+ * DMC-500 has 2 system interfaces each having a similar set of regs
+ * to configure each interface.
+ */
+#define SI0_BASE 0x0000
+#define SI1_BASE 0x0200
+
+/* Bit positions of SIx_SI_STATUS */
+#define SI_EMPTY_SHIFT 0x01
+#define SI_STALL_ACK_SHIFT 0x00
+#define SI_EMPTY_MASK 0x01
+#define SI_STALL_ACK_MASK 0x01
+
+/* Bit positions of SIx_SI_INT_STATUS */
+#define PMU_REQ_INT_OVERFLOW_STATUS_SHIFT 18
+#define FAILED_ACCESS_INT_OVERFLOW_STATUS_SHIFT 16
+#define PMU_REQ_INT_STATUS_SHIFT 2
+#define FAILED_ACCESS_INT_INFO_TZ_OVERLAP_STATUS_SHIFT 1
+#define FAILED_ACCESS_INT_STATUS_SHIFT 0
+#define PMU_REQ_INT_OVERFLOW_STATUS_MASK 0x1
+#define FAILED_ACCESS_INT_OVERFLOW_STATUS_MASK 0x1
+#define PMU_REQ_INT_STATUS_MASK 0x1
+#define FAILED_ACCESS_INT_INFO_TZ_OVERLAP_STATUS_MASK 0x1
+#define FAILED_ACCESS_INT_STATUS_MASK 0x1
+
+/* Bit positions of SIx_TZ_FAIL_CONTROL */
+#define DIRECTION_SHIFT 24
+#define NON_SECURE_SHIFT 21
+#define PRIVILEGED_SHIFT 20
+#define FAILED_ACCESS_INT_INFO_RANK_MASKED_SHIFT 3
+#define FAILED_ACCESS_INT_INFO_UNMAPPED_SHIFT 2
+#define FAILED_ACCESS_INT_TZ_FAIL_SHIFT 0x1
+#define FAILED_ACCESS_INT_INFO_OUTSIDE_DEFAULT_SHIFT 0
+#define DIRECTION_MASK 0x1
+#define NON_SECURE_MASK 0x1
+#define PRIVILEGED_MASK 0x1
+#define FAILED_ACCESS_INT_INFO_RANK_MASKED_MASK 0x1
+#define FAILED_ACCESS_INT_INFO_UNMAPPED_MASK 0x1
+#define FAILED_ACCESS_INT_TZ_FAIL_MASK 1
+#define FAILED_ACCESS_INT_INFO_OUTSIDE_DEFAULT_MASK 0x1
+
+/* Bit positions of SIx_FAIL_STATUS */
+#define FAIL_ID_VNET_SHIFT 24
+#define FAIL_ID_ID_SHIFT 0
+#define FAIL_ID_VNET_MASK 0xf
+#define FAIL_ID_ID_MASK 0xffffff
+
+/* Bit positions of SIx_SI_STATE_CONTRL */
+#define SI_STALL_REQ_GO 0x0
+#define SI_STALL_REQ_STALL 0x1
+
+/* Bit positions of SIx_SI_FLUSH_CONTROL */
+#define SI_FLUSH_REQ_INACTIVE 0x0
+#define SI_FLUSH_REQ_ACTIVE 0x1
+#define SI_FLUSH_REQ_MASK 0x1
+
+/* Bit positions of SIx_SI_INT_CONTROL */
+#define PMU_REQ_INT_EN_SHIFT 2
+#define OVERLAP_DETECT_INT_EN_SHIFT 1
+#define FAILED_ACCESS_INT_EN_SHIFT 0
+#define PMU_REQ_INT_EN_MASK 0x1
+#define OVERLAP_DETECT_INT_EN_MASK 0x1
+#define FAILED_ACCESS_INT_EN_MASK 0x1
+#define PMU_REQ_INT_EN 0x1
+#define OVERLAP_DETECT_INT_EN 0x1
+#define FAILED_ACCESS_INT_EN 0x1
+
+/* Bit positions of SIx_SI_INT_CLR */
+#define PMU_REQ_OFLOW_CLR_SHIFT 18
+#define FAILED_ACCESS_OFLOW_CLR_SHIFT 16
+#define PMU_REQ_INT_CLR_SHIFT 2
+#define FAILED_ACCESS_INT_CLR_SHIFT 0
+#define PMU_REQ_OFLOW_CLR_MASK 0x1
+#define FAILED_ACCESS_OFLOW_CLR_MASK 0x1
+#define PMU_REQ_INT_CLR_MASK 0x1
+#define FAILED_ACCESS_INT_CLR_MASK 0x1
+#define PMU_REQ_OFLOW_CLR 0x1
+#define FAILED_ACCESS_OFLOW_CLR 0x1
+#define PMU_REQ_INT_CLR 0x1
+#define FAILED_ACCESS_INT_CLR 0x1
+
+/* Macro to get the correct base register for a system interface */
+#define IFACE_OFFSET(sys_if) ((sys_if) ? SI1_BASE : SI0_BASE)
+
+#define MAX_SYS_IF_COUNT 2
+#define MAX_REGION_VAL 8
+
+/* DMC-500 supports striping across a max of 4 DMC instances */
+#define MAX_DMC_COUNT 4
+
+/* Consist of part_number_1 and part_number_0 */
+#define DMC500_PERIPHERAL_ID 0x0450
+
+/* Filter enable bits in a TZC */
+#define TZC_DMC500_REGION_ATTR_F_EN_MASK 0x1
+
+/* Length of registers for configuring each region */
+#define TZC_DMC500_REGION_SIZE 0x018
+
+#ifndef __ASSEMBLY__
+
+#include <stdint.h>
+
+/*
+ * Contains the base addresses of all the DMC instances.
+ */
+typedef struct tzc_dmc500_driver_data {
+ uintptr_t dmc_base[MAX_DMC_COUNT];
+ int dmc_count;
+} tzc_dmc500_driver_data_t;
+
+void tzc_dmc500_driver_init(const tzc_dmc500_driver_data_t *plat_driver_data);
+void tzc_dmc500_configure_region0(tzc_region_attributes_t sec_attr,
+ unsigned int nsaid_permissions);
+void tzc_dmc500_configure_region(int region_no,
+ uintptr_t region_base,
+ uintptr_t region_top,
+ tzc_region_attributes_t sec_attr,
+ unsigned int nsaid_permissions);
+void tzc_dmc500_set_action(tzc_action_t action);
+void tzc_dmc500_config_complete(void);
+int tzc_dmc500_verify_complete(void);
+
+
+#endif /* __ASSEMBLY__ */
+#endif /* __TZC_DMC500_H__ */
+
diff --git a/include/plat/arm/common/plat_arm.h b/include/plat/arm/common/plat_arm.h
index e9eebaa..2fe0a69 100644
--- a/include/plat/arm/common/plat_arm.h
+++ b/include/plat/arm/common/plat_arm.h
@@ -130,7 +130,9 @@
void arm_io_setup(void);
/* Security utility functions */
-void arm_tzc_setup(void);
+void arm_tzc400_setup(void);
+struct tzc_dmc500_driver_data;
+void arm_tzc_dmc500_setup(struct tzc_dmc500_driver_data *plat_driver_data);
/* Systimer utility function */
void arm_configure_sys_timer(void);
diff --git a/include/plat/arm/css/common/css_def.h b/include/plat/arm/css/common/css_def.h
index f92126b..636daf2 100644
--- a/include/plat/arm/css/common/css_def.h
+++ b/include/plat/arm/css/common/css_def.h
@@ -143,7 +143,7 @@
#define PLAT_ARM_NS_IMAGE_OFFSET 0xE0000000
/* TZC related constants */
-#define PLAT_ARM_TZC_FILTERS REG_ATTR_FILTER_BIT_ALL
+#define PLAT_ARM_TZC_FILTERS TZC_400_REGION_ATTR_FILTER_BIT_ALL
/* Trusted mailbox base address common to all CSS */
#define PLAT_ARM_TRUSTED_MAILBOX_BASE ARM_TRUSTED_SRAM_BASE
diff --git a/plat/arm/board/fvp/fvp_security.c b/plat/arm/board/fvp/fvp_security.c
index 0cf8450..b1de977 100644
--- a/plat/arm/board/fvp/fvp_security.c
+++ b/plat/arm/board/fvp/fvp_security.c
@@ -46,5 +46,5 @@
*/
if (get_arm_config()->flags & ARM_CONFIG_HAS_TZC)
- arm_tzc_setup();
+ arm_tzc400_setup();
}
diff --git a/plat/arm/board/fvp/include/platform_def.h b/plat/arm/board/fvp/include/platform_def.h
index 3428cb5..ca8e35e 100644
--- a/plat/arm/board/fvp/include/platform_def.h
+++ b/plat/arm/board/fvp/include/platform_def.h
@@ -113,7 +113,7 @@
* would normally use the default ID so allow that too.
*/
#define PLAT_ARM_TZC_BASE 0x2a4a0000
-#define PLAT_ARM_TZC_FILTERS REG_ATTR_FILTER_BIT(0)
+#define PLAT_ARM_TZC_FILTERS TZC_400_REGION_ATTR_FILTER_BIT(0)
#define PLAT_ARM_TZC_NS_DEV_ACCESS ( \
TZC_REGION_ACCESS_RDWR(FVP_NSAID_DEFAULT) | \
diff --git a/plat/arm/board/fvp/platform.mk b/plat/arm/board/fvp/platform.mk
index aad2e2e..afd939d 100644
--- a/plat/arm/board/fvp/platform.mk
+++ b/plat/arm/board/fvp/platform.mk
@@ -65,7 +65,7 @@
FVP_INTERCONNECT_SOURCES := drivers/arm/cci/cci.c \
plat/arm/common/arm_cci.c
-FVP_SECURITY_SOURCES := drivers/arm/tzc400/tzc400.c \
+FVP_SECURITY_SOURCES := drivers/arm/tzc/tzc400.c \
plat/arm/board/fvp/fvp_security.c \
plat/arm/common/arm_tzc400.c
diff --git a/plat/arm/board/juno/juno_security.c b/plat/arm/board/juno/juno_security.c
index f9386ca..202342a 100644
--- a/plat/arm/board/juno/juno_security.c
+++ b/plat/arm/board/juno/juno_security.c
@@ -65,7 +65,7 @@
void plat_arm_security_setup(void)
{
/* Initialize the TrustZone Controller */
- arm_tzc_setup();
+ arm_tzc400_setup();
/* Do ARM CSS internal NIC setup */
css_init_nic400();
/* Do ARM CSS SoC security setup */
diff --git a/plat/arm/board/juno/platform.mk b/plat/arm/board/juno/platform.mk
index 0a2244d..4fda4ca 100644
--- a/plat/arm/board/juno/platform.mk
+++ b/plat/arm/board/juno/platform.mk
@@ -37,7 +37,7 @@
JUNO_INTERCONNECT_SOURCES := drivers/arm/cci/cci.c \
plat/arm/common/arm_cci.c
-JUNO_SECURITY_SOURCES := drivers/arm/tzc400/tzc400.c \
+JUNO_SECURITY_SOURCES := drivers/arm/tzc/tzc400.c \
plat/arm/board/juno/juno_security.c \
plat/arm/common/arm_tzc400.c
diff --git a/plat/arm/common/arm_tzc400.c b/plat/arm/common/arm_tzc400.c
index 8b46aae..3962940 100644
--- a/plat/arm/common/arm_tzc400.c
+++ b/plat/arm/common/arm_tzc400.c
@@ -48,53 +48,53 @@
* When booting an EL3 payload, this is simplified: we configure region 0 with
* secure access only and do not enable any other region.
******************************************************************************/
-void arm_tzc_setup(void)
+void arm_tzc400_setup(void)
{
INFO("Configuring TrustZone Controller\n");
- tzc_init(PLAT_ARM_TZC_BASE);
+ tzc400_init(PLAT_ARM_TZC_BASE);
/* Disable filters. */
- tzc_disable_filters();
+ tzc400_disable_filters();
#ifndef EL3_PAYLOAD_BASE
/* Region 0 set to no access by default */
- tzc_configure_region0(TZC_REGION_S_NONE, 0);
+ tzc400_configure_region0(TZC_REGION_S_NONE, 0);
/* Region 1 set to cover Secure part of DRAM */
- tzc_configure_region(PLAT_ARM_TZC_FILTERS, 1,
+ tzc400_configure_region(PLAT_ARM_TZC_FILTERS, 1,
ARM_AP_TZC_DRAM1_BASE, ARM_AP_TZC_DRAM1_END,
TZC_REGION_S_RDWR,
0);
/* Region 2 set to cover Non-Secure access to 1st DRAM address range.
* Apply the same configuration to given filters in the TZC. */
- tzc_configure_region(PLAT_ARM_TZC_FILTERS, 2,
+ tzc400_configure_region(PLAT_ARM_TZC_FILTERS, 2,
ARM_NS_DRAM1_BASE, ARM_NS_DRAM1_END,
TZC_REGION_S_NONE,
PLAT_ARM_TZC_NS_DEV_ACCESS);
/* Region 3 set to cover Non-Secure access to 2nd DRAM address range */
- tzc_configure_region(PLAT_ARM_TZC_FILTERS, 3,
+ tzc400_configure_region(PLAT_ARM_TZC_FILTERS, 3,
ARM_DRAM2_BASE, ARM_DRAM2_END,
TZC_REGION_S_NONE,
PLAT_ARM_TZC_NS_DEV_ACCESS);
#else
/* Allow secure access only to DRAM for EL3 payloads. */
- tzc_configure_region0(TZC_REGION_S_RDWR, 0);
+ tzc400_configure_region0(TZC_REGION_S_RDWR, 0);
#endif /* EL3_PAYLOAD_BASE */
/*
* Raise an exception if a NS device tries to access secure memory
* TODO: Add interrupt handling support.
*/
- tzc_set_action(TZC_ACTION_ERR);
+ tzc400_set_action(TZC_ACTION_ERR);
/* Enable filters. */
- tzc_enable_filters();
+ tzc400_enable_filters();
}
void plat_arm_security_setup(void)
{
- arm_tzc_setup();
+ arm_tzc400_setup();
}
diff --git a/plat/arm/common/arm_tzc_dmc500.c b/plat/arm/common/arm_tzc_dmc500.c
new file mode 100644
index 0000000..f0ed9a6
--- /dev/null
+++ b/plat/arm/common/arm_tzc_dmc500.c
@@ -0,0 +1,100 @@
+/*
+ * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <arm_def.h>
+#include <assert.h>
+#include <debug.h>
+#include <platform_def.h>
+#include <tzc_dmc500.h>
+
+/*******************************************************************************
+ * Initialize the DMC500-TrustZone Controller for ARM standard platforms.
+ * Configure both the interfaces on Region 0 with no access, Region 1 with
+ * secure access only, and the remaining DRAM regions access from the
+ * given Non-Secure masters.
+ *
+ * When booting an EL3 payload, this is simplified: we configure region 0 with
+ * secure access only and do not enable any other region.
+ ******************************************************************************/
+void arm_tzc_dmc500_setup(tzc_dmc500_driver_data_t *plat_driver_data)
+{
+ assert(plat_driver_data);
+
+ INFO("Configuring DMC-500 TZ Settings\n");
+
+ tzc_dmc500_driver_init(plat_driver_data);
+
+#ifndef EL3_PAYLOAD_BASE
+ /* Region 0 set to no access by default */
+ tzc_dmc500_configure_region0(TZC_REGION_S_NONE, 0);
+
+ /* Region 1 set to cover Secure part of DRAM */
+ tzc_dmc500_configure_region(1, ARM_AP_TZC_DRAM1_BASE,
+ ARM_AP_TZC_DRAM1_END,
+ TZC_REGION_S_RDWR,
+ 0);
+
+ /* Region 2 set to cover Non-Secure access to 1st DRAM address range.*/
+ tzc_dmc500_configure_region(2,
+ ARM_NS_DRAM1_BASE,
+ ARM_NS_DRAM1_END,
+ TZC_REGION_S_NONE,
+ PLAT_ARM_TZC_NS_DEV_ACCESS);
+
+ /* Region 3 set to cover Non-Secure access to 2nd DRAM address range */
+ tzc_dmc500_configure_region(3,
+ ARM_DRAM2_BASE,
+ ARM_DRAM2_END,
+ TZC_REGION_S_NONE,
+ PLAT_ARM_TZC_NS_DEV_ACCESS);
+#else
+ /* Allow secure access only to DRAM for EL3 payloads */
+ tzc_dmc500_configure_region0(TZC_REGION_S_RDWR, 0);
+#endif
+ /*
+ * Raise an exception if a NS device tries to access secure memory
+ * TODO: Add interrupt handling support.
+ */
+ tzc_dmc500_set_action(TZC_ACTION_RV_LOWERR);
+
+ /*
+ * Flush the configuration settings to have an affect. Validate
+ * flush by checking FILTER_EN is set on region 1 attributes
+ * register.
+ */
+ tzc_dmc500_config_complete();
+
+ /*
+ * Wait for the flush to complete.
+ * TODO: Have a timeout for this loop
+ */
+ while (tzc_dmc500_verify_complete())
+ ;
+}