Merge "Cortex_hercules: Add support for Hercules-AE" into integration
diff --git a/bl32/sp_min/aarch32/entrypoint.S b/bl32/sp_min/aarch32/entrypoint.S
index 2ffef6a..0a68475 100644
--- a/bl32/sp_min/aarch32/entrypoint.S
+++ b/bl32/sp_min/aarch32/entrypoint.S
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2019, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -183,15 +183,6 @@
stcopr r0, SCR
isb
- /*
- * Set PMCR.DP to 1 to prohibit cycle counting whilst in Secure Mode.
- * Also, the PMCR.LC field has an architecturally UNKNOWN value on reset
- * and so set to 1 as ARM has deprecated use of PMCR.LC=0.
- */
- ldcopr r0, PMCR
- orr r0, r0, #(PMCR_LC_BIT | PMCR_DP_BIT)
- stcopr r0, PMCR
-
ldr r0, [r2, #SMC_CTX_GPREG_R0] /* smc_fid */
/* Check whether an SMC64 is issued */
tst r0, #(FUNCID_CC_MASK << FUNCID_CC_SHIFT)
@@ -236,15 +227,6 @@
stcopr r0, SCR
isb
- /*
- * Set PMCR.DP to 1 to prohibit cycle counting whilst in Secure Mode.
- * Also, the PMCR.LC field has an architecturally UNKNOWN value on reset
- * and so set to 1 as ARM has deprecated use of PMCR.LC=0.
- */
- ldcopr r0, PMCR
- orr r0, r0, #(PMCR_LC_BIT | PMCR_DP_BIT)
- stcopr r0, PMCR
-
push {r2, r3}
bl sp_min_fiq
pop {r0, r3}
diff --git a/docs/getting_started/user-guide.rst b/docs/getting_started/user-guide.rst
index 44bfb7a..9c1c3a2 100644
--- a/docs/getting_started/user-guide.rst
+++ b/docs/getting_started/user-guide.rst
@@ -9,7 +9,7 @@
This document assumes that the reader has previous experience running a fully
bootable Linux software stack on Juno or FVP using the prebuilt binaries and
-filesystems provided by `Linaro`_. Further information may be found in the
+filesystems provided by Linaro. Further information may be found in the
`Linaro instructions`_. It also assumes that the user understands the role of
the different software components required to boot a Linux system:
@@ -48,15 +48,10 @@
sudo apt-get install device-tree-compiler build-essential gcc make git libssl-dev
-TF-A has been tested with Linaro Release 18.04.
-
Download and install the AArch32 (arm-eabi) or AArch64 little-endian
(aarch64-linux-gnu) GCC cross compiler. If you would like to use the latest
features available, download GCC 8.3-2019.03 compiler from
-`arm Developer page`_. Otherwise, the `Linaro Release Notes`_ documents which
-version of the compiler to use for a given Linaro Release. Also, these
-`Linaro instructions`_ provide further guidance and a script, which can be used
-to download Linaro deliverables automatically.
+`Arm Developer page`_.
Optionally, TF-A can be built using clang version 4.0 or newer or Arm
Compiler 6. See instructions below on how to switch the default compiler.
@@ -73,6 +68,10 @@
This tool can be found in most Linux distributions. Inkscape is needed to
generate the actual \*.png files.
+TF-A has been tested with pre-built binaries and file systems from
+`Linaro Release 19.06`_. Alternatively, you can build the binaries from
+source using instructions provided at the `Arm Platforms User guide`_.
+
Getting the TF-A source code
----------------------------
@@ -127,7 +126,7 @@
-------------
- Before building TF-A, the environment variable ``CROSS_COMPILE`` must point
- to the Linaro cross compiler.
+ to the cross compiler.
For AArch64:
@@ -1401,7 +1400,7 @@
separately for AArch32.
- Before building BL32, the environment variable ``CROSS_COMPILE`` must point
- to the AArch32 Linaro cross compiler.
+ to the AArch32 cross compiler.
.. code:: shell
@@ -1422,7 +1421,7 @@
make realclean
- Before building BL1 and BL2, the environment variable ``CROSS_COMPILE``
- must point to the AArch64 Linaro cross compiler.
+ must point to the AArch64 cross compiler.
.. code:: shell
@@ -2154,11 +2153,9 @@
This version of TF-A has been tested on variants r0, r1 and r2 of Juno.
-To execute the software stack on Juno, the version of the Juno board recovery
-image indicated in the `Linaro Release Notes`_ must be installed. If you have an
-earlier version installed or are unsure which version is installed, please
-re-install the recovery image by following the
-`Instructions for using Linaro's deliverables on Juno`_.
+To execute the software stack on Juno, installing the latest Arm Platforms
+software deliverables is recommended. Please install the deliverables by
+following the `Instructions for using Linaro's deliverables on Juno`_.
Preparing TF-A images
~~~~~~~~~~~~~~~~~~~~~
@@ -2193,11 +2190,11 @@
*Copyright (c) 2013-2019, Arm Limited and Contributors. All rights reserved.*
-.. _arm Developer page: https://developer.arm.com/open-source/gnu-toolchain/gnu-a/downloads
-.. _Linaro: `Linaro Release Notes`_
-.. _Linaro Release: `Linaro Release Notes`_
-.. _Linaro Release Notes: https://community.arm.com/dev-platforms/w/docs/226/old-release-notes
-.. _Linaro instructions: https://community.arm.com/dev-platforms/w/docs/304/arm-reference-platforms-deliverables
+.. _Arm Developer page: https://developer.arm.com/open-source/gnu-toolchain/gnu-a/downloads
+.. _Linaro Release: http://releases.linaro.org/members/arm/platforms
+.. _Linaro Release 19.06: http://releases.linaro.org/members/arm/platforms/19.06
+.. _Linaro instructions: https://git.linaro.org/landing-teams/working/arm/arm-reference-platforms.git/about
+.. _Arm Platforms User guide: https://git.linaro.org/landing-teams/working/arm/arm-reference-platforms.git/about/docs/user-guide.rst
.. _Instructions for using Linaro's deliverables on Juno: https://community.arm.com/dev-platforms/w/docs/303/juno
.. _Arm Platforms Portal: https://community.arm.com/dev-platforms/
.. _Development Studio 5 (DS-5): https://developer.arm.com/products/software-development-tools/ds-5-development-studio
diff --git a/include/arch/aarch32/arch.h b/include/arch/aarch32/arch.h
index 34036d7..2017548 100644
--- a/include/arch/aarch32/arch.h
+++ b/include/arch/aarch32/arch.h
@@ -162,6 +162,7 @@
#define SDCR_SPD_DISABLE U(0x2)
#define SDCR_SPD_ENABLE U(0x3)
#define SDCR_SCCD_BIT (U(1) << 23)
+#define SDCR_SPME_BIT (U(1) << 17)
#define SDCR_RESET_VAL U(0x0)
/* HSCTLR definitions */
@@ -243,6 +244,8 @@
#define VTTBR_BADDR_SHIFT U(0)
/* HDCR definitions */
+#define HDCR_HLP_BIT (U(1) << 26)
+#define HDCR_HPME_BIT (U(1) << 7)
#define HDCR_RESET_VAL U(0x0)
/* HSTR definitions */
@@ -419,8 +422,10 @@
#define PMCR_N_SHIFT U(11)
#define PMCR_N_MASK U(0x1f)
#define PMCR_N_BITS (PMCR_N_MASK << PMCR_N_SHIFT)
+#define PMCR_LP_BIT (U(1) << 7)
#define PMCR_LC_BIT (U(1) << 6)
#define PMCR_DP_BIT (U(1) << 5)
+#define PMCR_RESET_VAL U(0x0)
/*******************************************************************************
* Definitions of register offsets, fields and macros for CPU system
diff --git a/include/arch/aarch32/el3_common_macros.S b/include/arch/aarch32/el3_common_macros.S
index 0bd8978..c62d7d7 100644
--- a/include/arch/aarch32/el3_common_macros.S
+++ b/include/arch/aarch32/el3_common_macros.S
@@ -112,15 +112,41 @@
* SDCR.SPD: Disable AArch32 privileged debug. Debug exceptions from
* Secure EL1 are disabled.
*
- * SDCR: Set to one so that cycle counting by PMCCNTR is prohibited in
- * Secure state. This bit is RES0 in versions of the architecture
+ * SDCR.SCCD: Set to one so that cycle counting by PMCCNTR is prohibited
+ * in Secure state. This bit is RES0 in versions of the architecture
* earlier than ARMv8.5, setting it to 1 doesn't have any effect on
* them.
* ---------------------------------------------------------------------
*/
ldr r0, =(SDCR_RESET_VAL | SDCR_SPD(SDCR_SPD_DISABLE) | SDCR_SCCD_BIT)
stcopr r0, SDCR
+
+ /* ---------------------------------------------------------------------
+ * Initialise PMCR, setting all fields rather than relying
+ * on hw. Some fields are architecturally UNKNOWN on reset.
+ *
+ * PMCR.LP: Set to one so that event counter overflow, that
+ * is recorded in PMOVSCLR[0-30], occurs on the increment
+ * that changes PMEVCNTR<n>[63] from 1 to 0, when ARMv8.5-PMU
+ * is implemented. This bit is RES0 in versions of the architecture
+ * earlier than ARMv8.5, setting it to 1 doesn't have any effect
+ * on them.
+ * This bit is Reserved, UNK/SBZP in ARMv7.
+ *
+ * PMCR.LC: Set to one so that cycle counter overflow, that
+ * is recorded in PMOVSCLR[31], occurs on the increment
+ * that changes PMCCNTR[63] from 1 to 0.
+ * This bit is Reserved, UNK/SBZP in ARMv7.
+ *
+ * PMCR.DP: Set to one to prohibit cycle counting whilst in Secure mode.
+ * ---------------------------------------------------------------------
+ */
+ ldr r0, =(PMCR_RESET_VAL | PMCR_DP_BIT | PMCR_LC_BIT | \
+ PMCR_LP_BIT)
+#else
+ ldr r0, =(PMCR_RESET_VAL | PMCR_DP_BIT)
#endif
+ stcopr r0, PMCR
/*
* If Data Independent Timing (DIT) functionality is implemented,
diff --git a/include/arch/aarch32/smccc_macros.S b/include/arch/aarch32/smccc_macros.S
index 1fe6c64..4ec2292 100644
--- a/include/arch/aarch32/smccc_macros.S
+++ b/include/arch/aarch32/smccc_macros.S
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2019, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -58,7 +58,6 @@
stm r0!, {r2}
stcopr r4, SCR
- isb
#else
/* Save the banked registers including the current SPSR and LR */
mrs r4, sp_usr
@@ -85,10 +84,34 @@
/* lr_mon is already saved by caller */
ldcopr r4, SCR
+
+#if ARM_ARCH_MAJOR > 7
+ /*
+ * Check if earlier initialization of SDCR.SCCD to 1
+ * failed, meaning that ARMv8-PMU is not implemented,
+ * cycle counting is not disabled and PMCR should be
+ * saved in Non-secure context.
+ */
+ ldcopr r5, SDCR
+ tst r5, #SDCR_SCCD_BIT
+ bne 1f
+#endif
+ /* Secure Cycle Counter is not disabled */
#endif
- str r4, [sp, #SMC_CTX_SCR]
- ldcopr r4, PMCR
- str r4, [sp, #SMC_CTX_PMCR]
+ ldcopr r5, PMCR
+
+ /* Check caller's security state */
+ tst r4, #SCR_NS_BIT
+ beq 2f
+
+ /* Save PMCR if called from Non-secure state */
+ str r5, [sp, #SMC_CTX_PMCR]
+
+ /* Disable cycle counter when event counting is prohibited */
+2: orr r5, r5, #PMCR_DP_BIT
+ stcopr r5, PMCR
+ isb
+1: str r4, [sp, #SMC_CTX_SCR]
.endm
/*
@@ -114,11 +137,30 @@
isb
/*
+ * Restore PMCR when returning to Non-secure state
+ */
+ tst r1, #SCR_NS_BIT
+ beq 2f
+
+ /*
+ * Back to Non-secure state
+ */
+#if ARM_ARCH_MAJOR > 7
+ /*
+ * Check if earlier initialization SDCR.SCCD to 1
+ * failed, meaning that ARMv8-PMU is not implemented and
+ * PMCR should be restored from Non-secure context.
+ */
+ ldcopr r1, SDCR
+ tst r1, #SDCR_SCCD_BIT
+ bne 2f
+#endif
+ /*
* Restore the PMCR register.
*/
ldr r1, [r0, #SMC_CTX_PMCR]
stcopr r1, PMCR
-
+2:
/* Restore the banked registers including the current SPSR */
add r1, r0, #SMC_CTX_SP_USR
diff --git a/lib/el3_runtime/aarch32/context_mgmt.c b/lib/el3_runtime/aarch32/context_mgmt.c
index a4702fc..73d1e35 100644
--- a/lib/el3_runtime/aarch32/context_mgmt.c
+++ b/lib/el3_runtime/aarch32/context_mgmt.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2019, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -281,10 +281,28 @@
*
* HDCR.HPMN: Set to value of PMCR.N which is the
* architecturally-defined reset value.
+ *
+ * HDCR.HLP: Set to one so that event counter
+ * overflow, that is recorded in PMOVSCLR[0-30],
+ * occurs on the increment that changes
+ * PMEVCNTR<n>[63] from 1 to 0, when ARMv8.5-PMU is
+ * implemented. This bit is RES0 in versions of the
+ * architecture earlier than ARMv8.5, setting it to 1
+ * doesn't have any effect on them.
+ * This bit is Reserved, UNK/SBZP in ARMv7.
+ *
+ * HDCR.HPME: Set to zero to disable EL2 Event
+ * counters.
*/
- write_hdcr(HDCR_RESET_VAL |
- ((read_pmcr() & PMCR_N_BITS) >> PMCR_N_SHIFT));
-
+#if (ARM_ARCH_MAJOR > 7)
+ write_hdcr((HDCR_RESET_VAL | HDCR_HLP_BIT |
+ ((read_pmcr() & PMCR_N_BITS) >>
+ PMCR_N_SHIFT)) & ~HDCR_HPME_BIT);
+#else
+ write_hdcr((HDCR_RESET_VAL |
+ ((read_pmcr() & PMCR_N_BITS) >>
+ PMCR_N_SHIFT)) & ~HDCR_HPME_BIT);
+#endif
/*
* Set HSTR to its architectural reset value so that
* access to system registers in the cproc=1111