plat: imx8m: Move the gpc hw reg to a separate header file
Although the GPC provides the similar functions for all the
i.MX8M SoC family, the HW register offset and bit defines
still have some slight difference, so move the hw reg
offset & most of the bitfield defines in 'gpc_reg.h' that
is specific to each SoC.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I291c435fe98c2f6e6ff8fe0c715ff3a83daa6a0f
diff --git a/plat/imx/imx8m/imx8mq/include/gpc_reg.h b/plat/imx/imx8m/imx8mq/include/gpc_reg.h
new file mode 100644
index 0000000..9f472d6
--- /dev/null
+++ b/plat/imx/imx8m/imx8mq/include/gpc_reg.h
@@ -0,0 +1,87 @@
+/*
+ * Copyright 2020 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef GPC_REG_H
+#define GPC_REG_H
+
+#define LPCR_A53_BSC 0x0
+#define LPCR_A53_BSC2 0x108
+#define LPCR_A53_AD 0x4
+#define LPCR_M4 0x8
+#define SLPCR 0x14
+#define MST_CPU_MAPPING 0x18
+#define MLPCR 0x20
+#define PGC_ACK_SEL_A53 0x24
+#define IMR1_CORE0_A53 0x30
+#define IMR1_CORE1_A53 0x40
+#define IMR1_CORE2_A53 0x1C0
+#define IMR1_CORE3_A53 0x1D0
+#define IMR1_CORE0_M4 0x50
+#define SLT0_CFG 0xB0
+#define GPC_PU_PWRHSK 0x1FC
+#define PGC_CPU_0_1_MAPPING 0xEC
+#define CPU_PGC_UP_TRG 0xF0
+#define PU_PGC_UP_TRG 0xF8
+#define CPU_PGC_DN_TRG 0xFC
+#define PU_PGC_DN_TRG 0x104
+#define LPS_CPU1 0x114
+#define A53_CORE0_PGC 0x800
+#define A53_PLAT_PGC 0x900
+#define PLAT_PGC_PCR 0x900
+#define NOC_PGC_PCR 0xa40
+#define PGC_SCU_TIMING 0x910
+
+#define MASK_DSM_TRIGGER_A53 BIT(31)
+#define IRQ_SRC_A53_WUP BIT(30)
+#define IRQ_SRC_A53_WUP_SHIFT 30
+#define IRQ_SRC_C1 BIT(29)
+#define IRQ_SRC_C0 BIT(28)
+#define IRQ_SRC_C3 BIT(23)
+#define IRQ_SRC_C2 BIT(22)
+#define CPU_CLOCK_ON_LPM BIT(14)
+#define A53_CLK_ON_LPM BIT(14)
+#define MASTER0_LPM_HSK BIT(6)
+#define MASTER1_LPM_HSK BIT(7)
+#define MASTER2_LPM_HSK BIT(8)
+
+#define L2PGE BIT(31)
+#define EN_L2_WFI_PDN BIT(5)
+#define EN_PLAT_PDN BIT(4)
+
+#define SLPCR_EN_DSM BIT(31)
+#define SLPCR_RBC_EN BIT(30)
+#define SLPCR_A53_FASTWUP_STOP_MODE BIT(17)
+#define SLPCR_A53_FASTWUP_WAIT_MODE BIT(16)
+#define SLPCR_VSTBY BIT(2)
+#define SLPCR_SBYOS BIT(1)
+#define SLPCR_BYPASS_PMIC_READY BIT(0)
+#define SLPCR_RBC_COUNT_SHIFT 24
+#define SLPCR_STBY_COUNT_SHFT 3
+
+#define A53_DUMMY_PDN_ACK BIT(15)
+#define A53_DUMMY_PUP_ACK BIT(31)
+#define A53_PLAT_PDN_ACK BIT(2)
+#define A53_PLAT_PUP_ACK BIT(18)
+#define NOC_PDN_SLT_CTRL BIT(10)
+#define NOC_PUP_SLT_CTRL BIT(11)
+#define NOC_PGC_PDN_ACK BIT(3)
+#define NOC_PGC_PUP_ACK BIT(19)
+
+#define DDRMIX_PWR_REQ BIT(5)
+#define DDRMIX_ADB400_SYNC BIT(1)
+#define DDRMIX_ADB400_ACK BIT(18)
+#define DDRMIX_PGC 0xd40
+
+#define PLAT_PUP_SLT_CTRL BIT(9)
+#define PLAT_PDN_SLT_CTRL BIT(8)
+
+#define SLT_PLAT_PDN BIT(8)
+#define SLT_PLAT_PUP BIT(9)
+
+#define MASTER1_MAPPING BIT(1)
+#define MASTER2_MAPPING BIT(2)
+
+#endif /* GPC_REG_H */