doc: Split the User Guide into multiple files
The User Guide document has grown organically over time and
now covers a wide range of topics, making it difficult to
skim read and extract information from. Currently, it covers
these topics and maybe a couple more:
- Requirements (hardware, tools, libs)
- Checking out the repo
- Basic build instructions
- A comprehensive list of build flags
- FIP packaging
- Building specifically for Juno
- Firmware update images
- EL3 payloads
- Preloaded BL33 boot flow
- Running on FVPs
- Running on Juno
I have separated these out into a few groups that become new
documents. Broadly speaking, build instructions for the tools,
for TF-A generally, and for specific scenarios are separated.
Content relating to specific platforms (Juno and the FVPs are
Arm-specific platforms, essentially) has been moved into the
documentation that is specific to those platforms, under
docs/plat/arm.
Change-Id: Ica87c52d8cd4f577332be0b0738998ea3ba3bbec
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
diff --git a/docs/plat/arm/arm-build-options.rst b/docs/plat/arm/arm-build-options.rst
new file mode 100644
index 0000000..d24ad23
--- /dev/null
+++ b/docs/plat/arm/arm-build-options.rst
@@ -0,0 +1,114 @@
+Arm Development Platform Build Options
+======================================
+
+Arm Platform Build Options
+--------------------------
+
+- ``ARM_BL31_IN_DRAM``: Boolean option to select loading of BL31 in TZC secured
+ DRAM. By default, BL31 is in the secure SRAM. Set this flag to 1 to load
+ BL31 in TZC secured DRAM. If TSP is present, then setting this option also
+ sets the TSP location to DRAM and ignores the ``ARM_TSP_RAM_LOCATION`` build
+ flag.
+
+- ``ARM_CONFIG_CNTACR``: boolean option to unlock access to the ``CNTBase<N>``
+ frame registers by setting the ``CNTCTLBase.CNTACR<N>`` register bits. The
+ frame number ``<N>`` is defined by ``PLAT_ARM_NSTIMER_FRAME_ID``, which
+ should match the frame used by the Non-Secure image (normally the Linux
+ kernel). Default is true (access to the frame is allowed).
+
+- ``ARM_DISABLE_TRUSTED_WDOG``: boolean option to disable the Trusted Watchdog.
+ By default, Arm platforms use a watchdog to trigger a system reset in case
+ an error is encountered during the boot process (for example, when an image
+ could not be loaded or authenticated). The watchdog is enabled in the early
+ platform setup hook at BL1 and disabled in the BL1 prepare exit hook. The
+ Trusted Watchdog may be disabled at build time for testing or development
+ purposes.
+
+- ``ARM_LINUX_KERNEL_AS_BL33``: The Linux kernel expects registers x0-x3 to
+ have specific values at boot. This boolean option allows the Trusted Firmware
+ to have a Linux kernel image as BL33 by preparing the registers to these
+ values before jumping to BL33. This option defaults to 0 (disabled). For
+ AArch64 ``RESET_TO_BL31`` and for AArch32 ``RESET_TO_SP_MIN`` must be 1 when
+ using it. If this option is set to 1, ``ARM_PRELOADED_DTB_BASE`` must be set
+ to the location of a device tree blob (DTB) already loaded in memory. The
+ Linux Image address must be specified using the ``PRELOADED_BL33_BASE``
+ option.
+
+- ``ARM_PLAT_MT``: This flag determines whether the Arm platform layer has to
+ cater for the multi-threading ``MT`` bit when accessing MPIDR. When this flag
+ is set, the functions which deal with MPIDR assume that the ``MT`` bit in
+ MPIDR is set and access the bit-fields in MPIDR accordingly. Default value of
+ this flag is 0. Note that this option is not used on FVP platforms.
+
+- ``ARM_RECOM_STATE_ID_ENC``: The PSCI1.0 specification recommends an encoding
+ for the construction of composite state-ID in the power-state parameter.
+ The existing PSCI clients currently do not support this encoding of
+ State-ID yet. Hence this flag is used to configure whether to use the
+ recommended State-ID encoding or not. The default value of this flag is 0,
+ in which case the platform is configured to expect NULL in the State-ID
+ field of power-state parameter.
+
+- ``ARM_ROTPK_LOCATION``: used when ``TRUSTED_BOARD_BOOT=1``. It specifies the
+ location of the ROTPK hash returned by the function ``plat_get_rotpk_info()``
+ for Arm platforms. Depending on the selected option, the proper private key
+ must be specified using the ``ROT_KEY`` option when building the Trusted
+ Firmware. This private key will be used by the certificate generation tool
+ to sign the BL2 and Trusted Key certificates. Available options for
+ ``ARM_ROTPK_LOCATION`` are:
+
+ - ``regs`` : return the ROTPK hash stored in the Trusted root-key storage
+ registers. The private key corresponding to this ROTPK hash is not
+ currently available.
+ - ``devel_rsa`` : return a development public key hash embedded in the BL1
+ and BL2 binaries. This hash has been obtained from the RSA public key
+ ``arm_rotpk_rsa.der``, located in ``plat/arm/board/common/rotpk``. To use
+ this option, ``arm_rotprivk_rsa.pem`` must be specified as ``ROT_KEY``
+ when creating the certificates.
+ - ``devel_ecdsa`` : return a development public key hash embedded in the BL1
+ and BL2 binaries. This hash has been obtained from the ECDSA public key
+ ``arm_rotpk_ecdsa.der``, located in ``plat/arm/board/common/rotpk``. To
+ use this option, ``arm_rotprivk_ecdsa.pem`` must be specified as
+ ``ROT_KEY`` when creating the certificates.
+
+- ``ARM_TSP_RAM_LOCATION``: location of the TSP binary. Options:
+
+ - ``tsram`` : Trusted SRAM (default option when TBB is not enabled)
+ - ``tdram`` : Trusted DRAM (if available)
+ - ``dram`` : Secure region in DRAM (default option when TBB is enabled,
+ configured by the TrustZone controller)
+
+- ``ARM_XLAT_TABLES_LIB_V1``: boolean option to compile TF-A with version 1
+ of the translation tables library instead of version 2. It is set to 0 by
+ default, which selects version 2.
+
+- ``ARM_CRYPTOCELL_INTEG`` : bool option to enable TF-A to invoke Arm®
+ TrustZone® CryptoCell functionality for Trusted Board Boot on capable Arm
+ platforms. If this option is specified, then the path to the CryptoCell
+ SBROM library must be specified via ``CCSBROM_LIB_PATH`` flag.
+
+For a better understanding of these options, the Arm development platform memory
+map is explained in the :ref:`Firmware Design`.
+
+.. _build_options_arm_css_platform:
+
+Arm CSS Platform-Specific Build Options
+---------------------------------------
+
+- ``CSS_DETECT_PRE_1_7_0_SCP``: Boolean flag to detect SCP version
+ incompatibility. Version 1.7.0 of the SCP firmware made a non-backwards
+ compatible change to the MTL protocol, used for AP/SCP communication.
+ TF-A no longer supports earlier SCP versions. If this option is set to 1
+ then TF-A will detect if an earlier version is in use. Default is 1.
+
+- ``CSS_LOAD_SCP_IMAGES``: Boolean flag, which when set, adds SCP_BL2 and
+ SCP_BL2U to the FIP and FWU_FIP respectively, and enables them to be loaded
+ during boot. Default is 1.
+
+- ``CSS_USE_SCMI_SDS_DRIVER``: Boolean flag which selects SCMI/SDS drivers
+ instead of SCPI/BOM driver for communicating with the SCP during power
+ management operations and for SCP RAM Firmware transfer. If this option
+ is set to 1, then SCMI/SDS drivers will be used. Default is 0.
+
+--------------
+
+*Copyright (c) 2019, Arm Limited. All rights reserved.*
diff --git a/docs/plat/fvp_ve.rst b/docs/plat/arm/fvp-ve/index.rst
similarity index 96%
rename from docs/plat/fvp_ve.rst
rename to docs/plat/arm/fvp-ve/index.rst
index 6abf9e5..8ac0741 100644
--- a/docs/plat/fvp_ve.rst
+++ b/docs/plat/arm/fvp-ve/index.rst
@@ -78,3 +78,7 @@
-C motherboard.flashloader1.fname=<path_to_fip.bin> \
--data cluster.cpu0=<path_to_zImage>@0x80080000 \
--data cluster.cpu0=<path_to_ramdisk>@0x84000000
+
+--------------
+
+*Copyright (c) 2019, Arm Limited. All rights reserved.*
diff --git a/docs/plat/arm/fvp/index.rst b/docs/plat/arm/fvp/index.rst
new file mode 100644
index 0000000..b6396b9
--- /dev/null
+++ b/docs/plat/arm/fvp/index.rst
@@ -0,0 +1,637 @@
+Arm Fixed Virtual Platforms (FVP)
+=================================
+
+Fixed Virtual Platform (FVP) Support
+------------------------------------
+
+This section lists the supported Arm |FVP| platforms. Please refer to the FVP
+documentation for a detailed description of the model parameter options.
+
+The latest version of the AArch64 build of TF-A has been tested on the following
+Arm FVPs without shifted affinities, and that do not support threaded CPU cores
+(64-bit host machine only).
+
+.. note::
+ The FVP models used are Version 11.6 Build 45, unless otherwise stated.
+
+- ``FVP_Base_AEMv8A-AEMv8A``
+- ``FVP_Base_AEMv8A-AEMv8A-AEMv8A-AEMv8A-CCN502``
+- ``FVP_Base_RevC-2xAEMv8A``
+- ``FVP_Base_Cortex-A32x4``
+- ``FVP_Base_Cortex-A35x4``
+- ``FVP_Base_Cortex-A53x4``
+- ``FVP_Base_Cortex-A55x4+Cortex-A75x4``
+- ``FVP_Base_Cortex-A55x4``
+- ``FVP_Base_Cortex-A57x1-A53x1``
+- ``FVP_Base_Cortex-A57x2-A53x4``
+- ``FVP_Base_Cortex-A57x4-A53x4``
+- ``FVP_Base_Cortex-A57x4``
+- ``FVP_Base_Cortex-A72x4-A53x4``
+- ``FVP_Base_Cortex-A72x4``
+- ``FVP_Base_Cortex-A73x4-A53x4``
+- ``FVP_Base_Cortex-A73x4``
+- ``FVP_Base_Cortex-A75x4``
+- ``FVP_Base_Cortex-A76x4``
+- ``FVP_Base_Cortex-A76AEx4``
+- ``FVP_Base_Cortex-A76AEx8``
+- ``FVP_Base_Cortex-A77x4`` (Version 11.7 build 36)
+- ``FVP_Base_Neoverse-N1x4``
+- ``FVP_Base_Zeusx4``
+- ``FVP_CSS_SGI-575`` (Version 11.3 build 42)
+- ``FVP_CSS_SGM-775`` (Version 11.3 build 42)
+- ``FVP_RD_E1Edge`` (Version 11.3 build 42)
+- ``FVP_RD_N1Edge``
+- ``Foundation_Platform``
+
+The latest version of the AArch32 build of TF-A has been tested on the
+following Arm FVPs without shifted affinities, and that do not support threaded
+CPU cores (64-bit host machine only).
+
+- ``FVP_Base_AEMv8A-AEMv8A``
+- ``FVP_Base_Cortex-A32x4``
+
+.. note::
+ The ``FVP_Base_RevC-2xAEMv8A`` FVP only supports shifted affinities, which
+ is not compatible with legacy GIC configurations. Therefore this FVP does not
+ support these legacy GIC configurations.
+
+The *Foundation* and *Base* FVPs can be downloaded free of charge. See the `Arm
+FVP website`_. The Cortex-A models listed above are also available to download
+from `Arm's website`_.
+
+.. note::
+ The build numbers quoted above are those reported by launching the FVP
+ with the ``--version`` parameter.
+
+.. note::
+ Linaro provides a ramdisk image in prebuilt FVP configurations and full
+ file systems that can be downloaded separately. To run an FVP with a virtio
+ file system image an additional FVP configuration option
+ ``-C bp.virtioblockdevice.image_path="<path-to>/<file-system-image>`` can be
+ used.
+
+.. note::
+ The software will not work on Version 1.0 of the Foundation FVP.
+ The commands below would report an ``unhandled argument`` error in this case.
+
+.. note::
+ FVPs can be launched with ``--cadi-server`` option such that a
+ CADI-compliant debugger (for example, Arm DS-5) can connect to and control
+ its execution.
+
+.. warning::
+ Since FVP model Version 11.0 Build 11.0.34 and Version 8.5 Build 0.8.5202
+ the internal synchronisation timings changed compared to older versions of
+ the models. The models can be launched with ``-Q 100`` option if they are
+ required to match the run time characteristics of the older versions.
+
+All the above platforms have been tested with `Linaro Release 19.06`_.
+
+.. _build_options_arm_fvp_platform:
+
+Arm FVP Platform Specific Build Options
+---------------------------------------
+
+- ``FVP_CLUSTER_COUNT`` : Configures the cluster count to be used to
+ build the topology tree within TF-A. By default TF-A is configured for dual
+ cluster topology and this option can be used to override the default value.
+
+- ``FVP_INTERCONNECT_DRIVER``: Selects the interconnect driver to be built. The
+ default interconnect driver depends on the value of ``FVP_CLUSTER_COUNT`` as
+ explained in the options below:
+
+ - ``FVP_CCI`` : The CCI driver is selected. This is the default
+ if 0 < ``FVP_CLUSTER_COUNT`` <= 2.
+ - ``FVP_CCN`` : The CCN driver is selected. This is the default
+ if ``FVP_CLUSTER_COUNT`` > 2.
+
+- ``FVP_MAX_CPUS_PER_CLUSTER``: Sets the maximum number of CPUs implemented in
+ a single cluster. This option defaults to 4.
+
+- ``FVP_MAX_PE_PER_CPU``: Sets the maximum number of PEs implemented on any CPU
+ in the system. This option defaults to 1. Note that the build option
+ ``ARM_PLAT_MT`` doesn't have any effect on FVP platforms.
+
+- ``FVP_USE_GIC_DRIVER`` : Selects the GIC driver to be built. Options:
+
+ - ``FVP_GIC600`` : The GIC600 implementation of GICv3 is selected
+ - ``FVP_GICV2`` : The GICv2 only driver is selected
+ - ``FVP_GICV3`` : The GICv3 only driver is selected (default option)
+
+- ``FVP_USE_SP804_TIMER`` : Use the SP804 timer instead of the Generic Timer
+ for functions that wait for an arbitrary time length (udelay and mdelay).
+ The default value is 0.
+
+- ``FVP_HW_CONFIG_DTS`` : Specify the path to the DTS file to be compiled
+ to DTB and packaged in FIP as the HW_CONFIG. See :ref:`Firmware Design` for
+ details on HW_CONFIG. By default, this is initialized to a sensible DTS
+ file in ``fdts/`` folder depending on other build options. But some cases,
+ like shifted affinity format for MPIDR, cannot be detected at build time
+ and this option is needed to specify the appropriate DTS file.
+
+- ``FVP_HW_CONFIG`` : Specify the path to the HW_CONFIG blob to be packaged in
+ FIP. See :ref:`Firmware Design` for details on HW_CONFIG. This option is
+ similar to the ``FVP_HW_CONFIG_DTS`` option, but it directly specifies the
+ HW_CONFIG blob instead of the DTS file. This option is useful to override
+ the default HW_CONFIG selected by the build system.
+
+Booting Firmware Update images
+------------------------------
+
+When Firmware Update (FWU) is enabled there are at least 2 new images
+that have to be loaded, the Non-Secure FWU ROM (NS-BL1U), and the
+FWU FIP.
+
+The additional fip images must be loaded with:
+
+::
+
+ --data cluster0.cpu0="<path_to>/ns_bl1u.bin"@0x0beb8000 [ns_bl1u_base_address]
+ --data cluster0.cpu0="<path_to>/fwu_fip.bin"@0x08400000 [ns_bl2u_base_address]
+
+The address ns_bl1u_base_address is the value of NS_BL1U_BASE.
+In the same way, the address ns_bl2u_base_address is the value of
+NS_BL2U_BASE.
+
+Booting an EL3 payload
+----------------------
+
+The EL3 payloads boot flow requires the CPU's mailbox to be cleared at reset for
+the secondary CPUs holding pen to work properly. Unfortunately, its reset value
+is undefined on the FVP platform and the FVP platform code doesn't clear it.
+Therefore, one must modify the way the model is normally invoked in order to
+clear the mailbox at start-up.
+
+One way to do that is to create an 8-byte file containing all zero bytes using
+the following command:
+
+.. code:: shell
+
+ dd if=/dev/zero of=mailbox.dat bs=1 count=8
+
+and pre-load it into the FVP memory at the mailbox address (i.e. ``0x04000000``)
+using the following model parameters:
+
+::
+
+ --data cluster0.cpu0=mailbox.dat@0x04000000 [Base FVPs]
+ --data=mailbox.dat@0x04000000 [Foundation FVP]
+
+To provide the model with the EL3 payload image, the following methods may be
+used:
+
+#. If the EL3 payload is able to execute in place, it may be programmed into
+ flash memory. On Base Cortex and AEM FVPs, the following model parameter
+ loads it at the base address of the NOR FLASH1 (the NOR FLASH0 is already
+ used for the FIP):
+
+ ::
+
+ -C bp.flashloader1.fname="<path-to>/<el3-payload>"
+
+ On Foundation FVP, there is no flash loader component and the EL3 payload
+ may be programmed anywhere in flash using method 3 below.
+
+#. When using the ``SPIN_ON_BL1_EXIT=1`` loading method, the following DS-5
+ command may be used to load the EL3 payload ELF image over JTAG:
+
+ ::
+
+ load <path-to>/el3-payload.elf
+
+#. The EL3 payload may be pre-loaded in volatile memory using the following
+ model parameters:
+
+ ::
+
+ --data cluster0.cpu0="<path-to>/el3-payload>"@address [Base FVPs]
+ --data="<path-to>/<el3-payload>"@address [Foundation FVP]
+
+ The address provided to the FVP must match the ``EL3_PAYLOAD_BASE`` address
+ used when building TF-A.
+
+Booting a preloaded kernel image (Base FVP)
+-------------------------------------------
+
+The following example uses a simplified boot flow by directly jumping from the
+TF-A to the Linux kernel, which will use a ramdisk as filesystem. This can be
+useful if both the kernel and the device tree blob (DTB) are already present in
+memory (like in FVP).
+
+For example, if the kernel is loaded at ``0x80080000`` and the DTB is loaded at
+address ``0x82000000``, the firmware can be built like this:
+
+.. code:: shell
+
+ CROSS_COMPILE=aarch64-linux-gnu- \
+ make PLAT=fvp DEBUG=1 \
+ RESET_TO_BL31=1 \
+ ARM_LINUX_KERNEL_AS_BL33=1 \
+ PRELOADED_BL33_BASE=0x80080000 \
+ ARM_PRELOADED_DTB_BASE=0x82000000 \
+ all fip
+
+Now, it is needed to modify the DTB so that the kernel knows the address of the
+ramdisk. The following script generates a patched DTB from the provided one,
+assuming that the ramdisk is loaded at address ``0x84000000``. Note that this
+script assumes that the user is using a ramdisk image prepared for U-Boot, like
+the ones provided by Linaro. If using a ramdisk without this header,the ``0x40``
+offset in ``INITRD_START`` has to be removed.
+
+.. code:: bash
+
+ #!/bin/bash
+
+ # Path to the input DTB
+ KERNEL_DTB=<path-to>/<fdt>
+ # Path to the output DTB
+ PATCHED_KERNEL_DTB=<path-to>/<patched-fdt>
+ # Base address of the ramdisk
+ INITRD_BASE=0x84000000
+ # Path to the ramdisk
+ INITRD=<path-to>/<ramdisk.img>
+
+ # Skip uboot header (64 bytes)
+ INITRD_START=$(printf "0x%x" $((${INITRD_BASE} + 0x40)) )
+ INITRD_SIZE=$(stat -Lc %s ${INITRD})
+ INITRD_END=$(printf "0x%x" $((${INITRD_BASE} + ${INITRD_SIZE})) )
+
+ CHOSEN_NODE=$(echo \
+ "/ { \
+ chosen { \
+ linux,initrd-start = <${INITRD_START}>; \
+ linux,initrd-end = <${INITRD_END}>; \
+ }; \
+ };")
+
+ echo $(dtc -O dts -I dtb ${KERNEL_DTB}) ${CHOSEN_NODE} | \
+ dtc -O dtb -o ${PATCHED_KERNEL_DTB} -
+
+And the FVP binary can be run with the following command:
+
+.. code:: shell
+
+ <path-to>/FVP_Base_AEMv8A-AEMv8A \
+ -C pctl.startup=0.0.0.0 \
+ -C bp.secure_memory=1 \
+ -C cluster0.NUM_CORES=4 \
+ -C cluster1.NUM_CORES=4 \
+ -C cache_state_modelled=1 \
+ -C cluster0.cpu0.RVBAR=0x04020000 \
+ -C cluster0.cpu1.RVBAR=0x04020000 \
+ -C cluster0.cpu2.RVBAR=0x04020000 \
+ -C cluster0.cpu3.RVBAR=0x04020000 \
+ -C cluster1.cpu0.RVBAR=0x04020000 \
+ -C cluster1.cpu1.RVBAR=0x04020000 \
+ -C cluster1.cpu2.RVBAR=0x04020000 \
+ -C cluster1.cpu3.RVBAR=0x04020000 \
+ --data cluster0.cpu0="<path-to>/bl31.bin"@0x04020000 \
+ --data cluster0.cpu0="<path-to>/<patched-fdt>"@0x82000000 \
+ --data cluster0.cpu0="<path-to>/<kernel-binary>"@0x80080000 \
+ --data cluster0.cpu0="<path-to>/<ramdisk.img>"@0x84000000
+
+Obtaining the Flattened Device Trees
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Depending on the FVP configuration and Linux configuration used, different
+FDT files are required. FDT source files for the Foundation and Base FVPs can
+be found in the TF-A source directory under ``fdts/``. The Foundation FVP has
+a subset of the Base FVP components. For example, the Foundation FVP lacks
+CLCD and MMC support, and has only one CPU cluster.
+
+.. note::
+ It is not recommended to use the FDTs built along the kernel because not
+ all FDTs are available from there.
+
+The dynamic configuration capability is enabled in the firmware for FVPs.
+This means that the firmware can authenticate and load the FDT if present in
+FIP. A default FDT is packaged into FIP during the build based on
+the build configuration. This can be overridden by using the ``FVP_HW_CONFIG``
+or ``FVP_HW_CONFIG_DTS`` build options (refer to
+:ref:`build_options_arm_fvp_platform` for details on the options).
+
+- ``fvp-base-gicv2-psci.dts``
+
+ For use with models such as the Cortex-A57-A53 Base FVPs without shifted
+ affinities and with Base memory map configuration.
+
+- ``fvp-base-gicv2-psci-aarch32.dts``
+
+ For use with models such as the Cortex-A32 Base FVPs without shifted
+ affinities and running Linux in AArch32 state with Base memory map
+ configuration.
+
+- ``fvp-base-gicv3-psci.dts``
+
+ For use with models such as the Cortex-A57-A53 Base FVPs without shifted
+ affinities and with Base memory map configuration and Linux GICv3 support.
+
+- ``fvp-base-gicv3-psci-1t.dts``
+
+ For use with models such as the AEMv8-RevC Base FVP with shifted affinities,
+ single threaded CPUs, Base memory map configuration and Linux GICv3 support.
+
+- ``fvp-base-gicv3-psci-dynamiq.dts``
+
+ For use with models as the Cortex-A55-A75 Base FVPs with shifted affinities,
+ single cluster, single threaded CPUs, Base memory map configuration and Linux
+ GICv3 support.
+
+- ``fvp-base-gicv3-psci-aarch32.dts``
+
+ For use with models such as the Cortex-A32 Base FVPs without shifted
+ affinities and running Linux in AArch32 state with Base memory map
+ configuration and Linux GICv3 support.
+
+- ``fvp-foundation-gicv2-psci.dts``
+
+ For use with Foundation FVP with Base memory map configuration.
+
+- ``fvp-foundation-gicv3-psci.dts``
+
+ (Default) For use with Foundation FVP with Base memory map configuration
+ and Linux GICv3 support.
+
+
+Running on the Foundation FVP with reset to BL1 entrypoint
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The following ``Foundation_Platform`` parameters should be used to boot Linux with
+4 CPUs using the AArch64 build of TF-A.
+
+.. code:: shell
+
+ <path-to>/Foundation_Platform \
+ --cores=4 \
+ --arm-v8.0 \
+ --secure-memory \
+ --visualization \
+ --gicv3 \
+ --data="<path-to>/<bl1-binary>"@0x0 \
+ --data="<path-to>/<FIP-binary>"@0x08000000 \
+ --data="<path-to>/<kernel-binary>"@0x80080000 \
+ --data="<path-to>/<ramdisk-binary>"@0x84000000
+
+Notes:
+
+- BL1 is loaded at the start of the Trusted ROM.
+- The Firmware Image Package is loaded at the start of NOR FLASH0.
+- The firmware loads the FDT packaged in FIP to the DRAM. The FDT load address
+ is specified via the ``hw_config_addr`` property in `TB_FW_CONFIG for FVP`_.
+- The default use-case for the Foundation FVP is to use the ``--gicv3`` option
+ and enable the GICv3 device in the model. Note that without this option,
+ the Foundation FVP defaults to legacy (Versatile Express) memory map which
+ is not supported by TF-A.
+- In order for TF-A to run correctly on the Foundation FVP, the architecture
+ versions must match. The Foundation FVP defaults to the highest v8.x
+ version it supports but the default build for TF-A is for v8.0. To avoid
+ issues either start the Foundation FVP to use v8.0 architecture using the
+ ``--arm-v8.0`` option, or build TF-A with an appropriate value for
+ ``ARM_ARCH_MINOR``.
+
+Running on the AEMv8 Base FVP with reset to BL1 entrypoint
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The following ``FVP_Base_RevC-2xAEMv8A`` parameters should be used to boot Linux
+with 8 CPUs using the AArch64 build of TF-A.
+
+.. code:: shell
+
+ <path-to>/FVP_Base_RevC-2xAEMv8A \
+ -C pctl.startup=0.0.0.0 \
+ -C bp.secure_memory=1 \
+ -C bp.tzc_400.diagnostics=1 \
+ -C cluster0.NUM_CORES=4 \
+ -C cluster1.NUM_CORES=4 \
+ -C cache_state_modelled=1 \
+ -C bp.secureflashloader.fname="<path-to>/<bl1-binary>" \
+ -C bp.flashloader0.fname="<path-to>/<FIP-binary>" \
+ --data cluster0.cpu0="<path-to>/<kernel-binary>"@0x80080000 \
+ --data cluster0.cpu0="<path-to>/<ramdisk>"@0x84000000
+
+.. note::
+ The ``FVP_Base_RevC-2xAEMv8A`` has shifted affinities and requires
+ a specific DTS for all the CPUs to be loaded.
+
+Running on the AEMv8 Base FVP (AArch32) with reset to BL1 entrypoint
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The following ``FVP_Base_AEMv8A-AEMv8A`` parameters should be used to boot Linux
+with 8 CPUs using the AArch32 build of TF-A.
+
+.. code:: shell
+
+ <path-to>/FVP_Base_AEMv8A-AEMv8A \
+ -C pctl.startup=0.0.0.0 \
+ -C bp.secure_memory=1 \
+ -C bp.tzc_400.diagnostics=1 \
+ -C cluster0.NUM_CORES=4 \
+ -C cluster1.NUM_CORES=4 \
+ -C cache_state_modelled=1 \
+ -C cluster0.cpu0.CONFIG64=0 \
+ -C cluster0.cpu1.CONFIG64=0 \
+ -C cluster0.cpu2.CONFIG64=0 \
+ -C cluster0.cpu3.CONFIG64=0 \
+ -C cluster1.cpu0.CONFIG64=0 \
+ -C cluster1.cpu1.CONFIG64=0 \
+ -C cluster1.cpu2.CONFIG64=0 \
+ -C cluster1.cpu3.CONFIG64=0 \
+ -C bp.secureflashloader.fname="<path-to>/<bl1-binary>" \
+ -C bp.flashloader0.fname="<path-to>/<FIP-binary>" \
+ --data cluster0.cpu0="<path-to>/<kernel-binary>"@0x80080000 \
+ --data cluster0.cpu0="<path-to>/<ramdisk>"@0x84000000
+
+Running on the Cortex-A57-A53 Base FVP with reset to BL1 entrypoint
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The following ``FVP_Base_Cortex-A57x4-A53x4`` model parameters should be used to
+boot Linux with 8 CPUs using the AArch64 build of TF-A.
+
+.. code:: shell
+
+ <path-to>/FVP_Base_Cortex-A57x4-A53x4 \
+ -C pctl.startup=0.0.0.0 \
+ -C bp.secure_memory=1 \
+ -C bp.tzc_400.diagnostics=1 \
+ -C cache_state_modelled=1 \
+ -C bp.secureflashloader.fname="<path-to>/<bl1-binary>" \
+ -C bp.flashloader0.fname="<path-to>/<FIP-binary>" \
+ --data cluster0.cpu0="<path-to>/<kernel-binary>"@0x80080000 \
+ --data cluster0.cpu0="<path-to>/<ramdisk>"@0x84000000
+
+Running on the Cortex-A32 Base FVP (AArch32) with reset to BL1 entrypoint
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The following ``FVP_Base_Cortex-A32x4`` model parameters should be used to
+boot Linux with 4 CPUs using the AArch32 build of TF-A.
+
+.. code:: shell
+
+ <path-to>/FVP_Base_Cortex-A32x4 \
+ -C pctl.startup=0.0.0.0 \
+ -C bp.secure_memory=1 \
+ -C bp.tzc_400.diagnostics=1 \
+ -C cache_state_modelled=1 \
+ -C bp.secureflashloader.fname="<path-to>/<bl1-binary>" \
+ -C bp.flashloader0.fname="<path-to>/<FIP-binary>" \
+ --data cluster0.cpu0="<path-to>/<kernel-binary>"@0x80080000 \
+ --data cluster0.cpu0="<path-to>/<ramdisk>"@0x84000000
+
+
+Running on the AEMv8 Base FVP with reset to BL31 entrypoint
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The following ``FVP_Base_RevC-2xAEMv8A`` parameters should be used to boot Linux
+with 8 CPUs using the AArch64 build of TF-A.
+
+.. code:: shell
+
+ <path-to>/FVP_Base_RevC-2xAEMv8A \
+ -C pctl.startup=0.0.0.0 \
+ -C bp.secure_memory=1 \
+ -C bp.tzc_400.diagnostics=1 \
+ -C cluster0.NUM_CORES=4 \
+ -C cluster1.NUM_CORES=4 \
+ -C cache_state_modelled=1 \
+ -C cluster0.cpu0.RVBAR=0x04010000 \
+ -C cluster0.cpu1.RVBAR=0x04010000 \
+ -C cluster0.cpu2.RVBAR=0x04010000 \
+ -C cluster0.cpu3.RVBAR=0x04010000 \
+ -C cluster1.cpu0.RVBAR=0x04010000 \
+ -C cluster1.cpu1.RVBAR=0x04010000 \
+ -C cluster1.cpu2.RVBAR=0x04010000 \
+ -C cluster1.cpu3.RVBAR=0x04010000 \
+ --data cluster0.cpu0="<path-to>/<bl31-binary>"@0x04010000 \
+ --data cluster0.cpu0="<path-to>/<bl32-binary>"@0xff000000 \
+ --data cluster0.cpu0="<path-to>/<bl33-binary>"@0x88000000 \
+ --data cluster0.cpu0="<path-to>/<fdt>"@0x82000000 \
+ --data cluster0.cpu0="<path-to>/<kernel-binary>"@0x80080000 \
+ --data cluster0.cpu0="<path-to>/<ramdisk>"@0x84000000
+
+Notes:
+
+- If Position Independent Executable (PIE) support is enabled for BL31
+ in this config, it can be loaded at any valid address for execution.
+
+- Since a FIP is not loaded when using BL31 as reset entrypoint, the
+ ``--data="<path-to><bl31|bl32|bl33-binary>"@<base-address-of-binary>``
+ parameter is needed to load the individual bootloader images in memory.
+ BL32 image is only needed if BL31 has been built to expect a Secure-EL1
+ Payload. For the same reason, the FDT needs to be compiled from the DT source
+ and loaded via the ``--data cluster0.cpu0="<path-to>/<fdt>"@0x82000000``
+ parameter.
+
+- The ``FVP_Base_RevC-2xAEMv8A`` has shifted affinities and requires a
+ specific DTS for all the CPUs to be loaded.
+
+- The ``-C cluster<X>.cpu<Y>.RVBAR=@<base-address-of-bl31>`` parameter, where
+ X and Y are the cluster and CPU numbers respectively, is used to set the
+ reset vector for each core.
+
+- Changing the default value of ``ARM_TSP_RAM_LOCATION`` will also require
+ changing the value of
+ ``--data="<path-to><bl32-binary>"@<base-address-of-bl32>`` to the new value of
+ ``BL32_BASE``.
+
+
+Running on the AEMv8 Base FVP (AArch32) with reset to SP_MIN entrypoint
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The following ``FVP_Base_AEMv8A-AEMv8A`` parameters should be used to boot Linux
+with 8 CPUs using the AArch32 build of TF-A.
+
+.. code:: shell
+
+ <path-to>/FVP_Base_AEMv8A-AEMv8A \
+ -C pctl.startup=0.0.0.0 \
+ -C bp.secure_memory=1 \
+ -C bp.tzc_400.diagnostics=1 \
+ -C cluster0.NUM_CORES=4 \
+ -C cluster1.NUM_CORES=4 \
+ -C cache_state_modelled=1 \
+ -C cluster0.cpu0.CONFIG64=0 \
+ -C cluster0.cpu1.CONFIG64=0 \
+ -C cluster0.cpu2.CONFIG64=0 \
+ -C cluster0.cpu3.CONFIG64=0 \
+ -C cluster1.cpu0.CONFIG64=0 \
+ -C cluster1.cpu1.CONFIG64=0 \
+ -C cluster1.cpu2.CONFIG64=0 \
+ -C cluster1.cpu3.CONFIG64=0 \
+ -C cluster0.cpu0.RVBAR=0x04002000 \
+ -C cluster0.cpu1.RVBAR=0x04002000 \
+ -C cluster0.cpu2.RVBAR=0x04002000 \
+ -C cluster0.cpu3.RVBAR=0x04002000 \
+ -C cluster1.cpu0.RVBAR=0x04002000 \
+ -C cluster1.cpu1.RVBAR=0x04002000 \
+ -C cluster1.cpu2.RVBAR=0x04002000 \
+ -C cluster1.cpu3.RVBAR=0x04002000 \
+ --data cluster0.cpu0="<path-to>/<bl32-binary>"@0x04002000 \
+ --data cluster0.cpu0="<path-to>/<bl33-binary>"@0x88000000 \
+ --data cluster0.cpu0="<path-to>/<fdt>"@0x82000000 \
+ --data cluster0.cpu0="<path-to>/<kernel-binary>"@0x80080000 \
+ --data cluster0.cpu0="<path-to>/<ramdisk>"@0x84000000
+
+.. note::
+ The load address of ``<bl32-binary>`` depends on the value ``BL32_BASE``.
+ It should match the address programmed into the RVBAR register as well.
+
+Running on the Cortex-A57-A53 Base FVP with reset to BL31 entrypoint
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The following ``FVP_Base_Cortex-A57x4-A53x4`` model parameters should be used to
+boot Linux with 8 CPUs using the AArch64 build of TF-A.
+
+.. code:: shell
+
+ <path-to>/FVP_Base_Cortex-A57x4-A53x4 \
+ -C pctl.startup=0.0.0.0 \
+ -C bp.secure_memory=1 \
+ -C bp.tzc_400.diagnostics=1 \
+ -C cache_state_modelled=1 \
+ -C cluster0.cpu0.RVBARADDR=0x04010000 \
+ -C cluster0.cpu1.RVBARADDR=0x04010000 \
+ -C cluster0.cpu2.RVBARADDR=0x04010000 \
+ -C cluster0.cpu3.RVBARADDR=0x04010000 \
+ -C cluster1.cpu0.RVBARADDR=0x04010000 \
+ -C cluster1.cpu1.RVBARADDR=0x04010000 \
+ -C cluster1.cpu2.RVBARADDR=0x04010000 \
+ -C cluster1.cpu3.RVBARADDR=0x04010000 \
+ --data cluster0.cpu0="<path-to>/<bl31-binary>"@0x04010000 \
+ --data cluster0.cpu0="<path-to>/<bl32-binary>"@0xff000000 \
+ --data cluster0.cpu0="<path-to>/<bl33-binary>"@0x88000000 \
+ --data cluster0.cpu0="<path-to>/<fdt>"@0x82000000 \
+ --data cluster0.cpu0="<path-to>/<kernel-binary>"@0x80080000 \
+ --data cluster0.cpu0="<path-to>/<ramdisk>"@0x84000000
+
+Running on the Cortex-A32 Base FVP (AArch32) with reset to SP_MIN entrypoint
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The following ``FVP_Base_Cortex-A32x4`` model parameters should be used to
+boot Linux with 4 CPUs using the AArch32 build of TF-A.
+
+.. code:: shell
+
+ <path-to>/FVP_Base_Cortex-A32x4 \
+ -C pctl.startup=0.0.0.0 \
+ -C bp.secure_memory=1 \
+ -C bp.tzc_400.diagnostics=1 \
+ -C cache_state_modelled=1 \
+ -C cluster0.cpu0.RVBARADDR=0x04002000 \
+ -C cluster0.cpu1.RVBARADDR=0x04002000 \
+ -C cluster0.cpu2.RVBARADDR=0x04002000 \
+ -C cluster0.cpu3.RVBARADDR=0x04002000 \
+ --data cluster0.cpu0="<path-to>/<bl32-binary>"@0x04002000 \
+ --data cluster0.cpu0="<path-to>/<bl33-binary>"@0x88000000 \
+ --data cluster0.cpu0="<path-to>/<fdt>"@0x82000000 \
+ --data cluster0.cpu0="<path-to>/<kernel-binary>"@0x80080000 \
+ --data cluster0.cpu0="<path-to>/<ramdisk>"@0x84000000
+
+--------------
+
+*Copyright (c) 2019, Arm Limited. All rights reserved.*
+
+.. _TB_FW_CONFIG for FVP: ../plat/arm/board/fvp/fdts/fvp_tb_fw_config.dts
+.. _Arm's website: `FVP models`_
+.. _FVP models: https://developer.arm.com/products/system-design/fixed-virtual-platforms
+.. _Linaro Release 19.06: http://releases.linaro.org/members/arm/platforms/19.06
+.. _Arm FVP website: https://developer.arm.com/products/system-design/fixed-virtual-platforms
diff --git a/docs/plat/arm/index.rst b/docs/plat/arm/index.rst
new file mode 100644
index 0000000..e26f75e
--- /dev/null
+++ b/docs/plat/arm/index.rst
@@ -0,0 +1,19 @@
+Arm Development Platforms
+=========================
+
+.. toctree::
+ :maxdepth: 1
+ :caption: Contents
+
+ juno/index
+ fvp/index
+ fvp-ve/index
+ arm-build-options
+
+This chapter holds documentation related to Arm's development platforms,
+including both software models (FVPs) and hardware development boards
+such as Juno.
+
+--------------
+
+*Copyright (c) 2019, Arm Limited. All rights reserved.*
diff --git a/docs/plat/arm/juno/index.rst b/docs/plat/arm/juno/index.rst
new file mode 100644
index 0000000..6429ede
--- /dev/null
+++ b/docs/plat/arm/juno/index.rst
@@ -0,0 +1,246 @@
+Arm Juno Development Platform
+=============================
+
+Platform-specific build options
+-------------------------------
+
+- ``JUNO_TZMP1`` : Boolean option to configure Juno to be used for TrustZone
+ Media Protection (TZ-MP1). Default value of this flag is 0.
+
+Running software on Juno
+------------------------
+
+This version of TF-A has been tested on variants r0, r1 and r2 of Juno.
+
+To execute the software stack on Juno, the version of the Juno board recovery
+image indicated in the `Linaro Release Notes`_ must be installed. If you have an
+earlier version installed or are unsure which version is installed, please
+re-install the recovery image by following the
+`Instructions for using Linaro's deliverables on Juno`_.
+
+Preparing TF-A images
+---------------------
+
+After building TF-A, the files ``bl1.bin`` and ``fip.bin`` need copying to the
+``SOFTWARE/`` directory of the Juno SD card.
+
+Creating a Firmware Image Package (FIP)
+---------------------------------------
+
+This section provides Juno and FVP specific instructions to build Trusted
+Firmware, obtain the additional required firmware, and pack it all together in
+a single FIP binary. It assumes that a Linaro release has been installed.
+
+.. note::
+ Pre-built binaries for AArch32 are available from Linaro Release 16.12
+ onwards. Before that release, pre-built binaries are only available for
+ AArch64.
+
+.. warning::
+ Follow the full instructions for one platform before switching to a
+ different one. Mixing instructions for different platforms may result in
+ corrupted binaries.
+
+.. warning::
+ The uboot image downloaded by the Linaro workspace script does not always
+ match the uboot image packaged as BL33 in the corresponding fip file. It is
+ recommended to use the version that is packaged in the fip file using the
+ instructions below.
+
+.. note::
+ For the FVP, the kernel FDT is packaged in FIP during build and loaded
+ by the firmware at runtime.
+
+#. Clean the working directory
+
+ .. code:: shell
+
+ make realclean
+
+#. Obtain SCP_BL2 (Juno) and BL33 (all platforms)
+
+ Use the fiptool to extract the SCP_BL2 and BL33 images from the FIP
+ package included in the Linaro release:
+
+ .. code:: shell
+
+ # Build the fiptool
+ make [DEBUG=1] [V=1] fiptool
+
+ # Unpack firmware images from Linaro FIP
+ ./tools/fiptool/fiptool unpack <path-to-linaro-release>/[SOFTWARE]/fip.bin
+
+ The unpack operation will result in a set of binary images extracted to the
+ current working directory. The SCP_BL2 image corresponds to
+ ``scp-fw.bin`` and BL33 corresponds to ``nt-fw.bin``.
+
+ .. note::
+ The fiptool will complain if the images to be unpacked already
+ exist in the current directory. If that is the case, either delete those
+ files or use the ``--force`` option to overwrite.
+
+ .. note::
+ For AArch32, the instructions below assume that nt-fw.bin is a
+ normal world boot loader that supports AArch32.
+
+#. Build TF-A images and create a new FIP for FVP
+
+ .. code:: shell
+
+ # AArch64
+ make PLAT=fvp BL33=nt-fw.bin all fip
+
+ # AArch32
+ make PLAT=fvp ARCH=aarch32 AARCH32_SP=sp_min BL33=nt-fw.bin all fip
+
+#. Build TF-A images and create a new FIP for Juno
+
+ For AArch64:
+
+ Building for AArch64 on Juno simply requires the addition of ``SCP_BL2``
+ as a build parameter.
+
+ .. code:: shell
+
+ make PLAT=juno BL33=nt-fw.bin SCP_BL2=scp-fw.bin all fip
+
+ For AArch32:
+
+ Hardware restrictions on Juno prevent cold reset into AArch32 execution mode,
+ therefore BL1 and BL2 must be compiled for AArch64, and BL32 is compiled
+ separately for AArch32.
+
+ - Before building BL32, the environment variable ``CROSS_COMPILE`` must point
+ to the AArch32 Linaro cross compiler.
+
+ .. code:: shell
+
+ export CROSS_COMPILE=<path-to-aarch32-gcc>/bin/arm-linux-gnueabihf-
+
+ - Build BL32 in AArch32.
+
+ .. code:: shell
+
+ make ARCH=aarch32 PLAT=juno AARCH32_SP=sp_min \
+ RESET_TO_SP_MIN=1 JUNO_AARCH32_EL3_RUNTIME=1 bl32
+
+ - Save ``bl32.bin`` to a temporary location and clean the build products.
+
+ ::
+
+ cp <path-to-build>/bl32.bin <path-to-temporary>
+ make realclean
+
+ - Before building BL1 and BL2, the environment variable ``CROSS_COMPILE``
+ must point to the AArch64 Linaro cross compiler.
+
+ .. code:: shell
+
+ export CROSS_COMPILE=<path-to-aarch64-gcc>/bin/aarch64-linux-gnu-
+
+ - The following parameters should be used to build BL1 and BL2 in AArch64
+ and point to the BL32 file.
+
+ .. code:: shell
+
+ make ARCH=aarch64 PLAT=juno JUNO_AARCH32_EL3_RUNTIME=1 \
+ BL33=nt-fw.bin SCP_BL2=scp-fw.bin \
+ BL32=<path-to-temporary>/bl32.bin all fip
+
+The resulting BL1 and FIP images may be found in:
+
+::
+
+ # Juno
+ ./build/juno/release/bl1.bin
+ ./build/juno/release/fip.bin
+
+ # FVP
+ ./build/fvp/release/bl1.bin
+ ./build/fvp/release/fip.bin
+
+
+Booting Firmware Update images
+------------------------------
+
+The new images must be programmed in flash memory by adding
+an entry in the ``SITE1/HBI0262x/images.txt`` configuration file
+on the Juno SD card (where ``x`` depends on the revision of the Juno board).
+Refer to the `Juno Getting Started Guide`_, section 2.3 "Flash memory
+programming" for more information. User should ensure these do not
+overlap with any other entries in the file.
+
+::
+
+ NOR10UPDATE: AUTO ;Image Update:NONE/AUTO/FORCE
+ NOR10ADDRESS: 0x00400000 ;Image Flash Address [ns_bl2u_base_address]
+ NOR10FILE: \SOFTWARE\fwu_fip.bin ;Image File Name
+ NOR10LOAD: 00000000 ;Image Load Address
+ NOR10ENTRY: 00000000 ;Image Entry Point
+
+ NOR11UPDATE: AUTO ;Image Update:NONE/AUTO/FORCE
+ NOR11ADDRESS: 0x03EB8000 ;Image Flash Address [ns_bl1u_base_address]
+ NOR11FILE: \SOFTWARE\ns_bl1u.bin ;Image File Name
+ NOR11LOAD: 00000000 ;Image Load Address
+
+The address ns_bl1u_base_address is the value of NS_BL1U_BASE - 0x8000000.
+In the same way, the address ns_bl2u_base_address is the value of
+NS_BL2U_BASE - 0x8000000.
+
+.. _plat_juno_booting_el3_payload:
+
+Booting an EL3 payload
+----------------------
+
+If the EL3 payload is able to execute in place, it may be programmed in flash
+memory by adding an entry in the ``SITE1/HBI0262x/images.txt`` configuration file
+on the Juno SD card (where ``x`` depends on the revision of the Juno board).
+Refer to the `Juno Getting Started Guide`_, section 2.3 "Flash memory
+programming" for more information.
+
+Alternatively, the same DS-5 command mentioned in the FVP section above can
+be used to load the EL3 payload's ELF file over JTAG on Juno.
+
+For more information on EL3 payloads in general, see
+:ref:`alt_boot_flows_el3_payload`.
+
+Booting a preloaded kernel image
+--------------------------------
+
+The Trusted Firmware must be compiled in a similar way as for FVP explained
+above. The process to load binaries to memory is the one explained in
+`plat_juno_booting_el3_payload`_.
+
+Testing System Suspend
+----------------------
+
+The SYSTEM SUSPEND is a PSCI API which can be used to implement system suspend
+to RAM. For more details refer to section 5.16 of `PSCI`_. To test system suspend
+on Juno, at the linux shell prompt, issue the following command:
+
+.. code:: shell
+
+ echo +10 > /sys/class/rtc/rtc0/wakealarm
+ echo -n mem > /sys/power/state
+
+The Juno board should suspend to RAM and then wakeup after 10 seconds due to
+wakeup interrupt from RTC.
+
+Additional Resources
+--------------------
+
+Please visit the `Arm Platforms Portal`_ to get support and obtain any other Juno
+software information. Please also refer to the `Juno Getting Started Guide`_ to
+get more detailed information about the Juno Arm development platform and how to
+configure it.
+
+--------------
+
+*Copyright (c) 2019, Arm Limited. All rights reserved.*
+
+.. _Linaro Release Notes: https://community.arm.com/dev-platforms/w/docs/226/old-release-notes
+.. _Instructions for using Linaro's deliverables on Juno: https://community.arm.com/dev-platforms/w/docs/303/juno
+.. _Arm Platforms Portal: https://community.arm.com/dev-platforms/
+.. _Juno Getting Started Guide: http://infocenter.arm.com/help/topic/com.arm.doc.dui0928e/DUI0928E_juno_arm_development_platform_gsg.pdf
+.. _PSCI: http://infocenter.arm.com/help/topic/com.arm.doc.den0022d/Power_State_Coordination_Interface_PDD_v1_1_DEN0022D.pdf
+.. _Juno Arm Development Platform: http://www.arm.com/products/tools/development-boards/versatile-express/juno-arm-development-platform.php
diff --git a/docs/plat/index.rst b/docs/plat/index.rst
index 5495280..63d29a9 100644
--- a/docs/plat/index.rst
+++ b/docs/plat/index.rst
@@ -8,10 +8,10 @@
:hidden:
allwinner
+ arm/index
meson-gxbb
meson-gxl
meson-g12a
- fvp_ve
hikey
hikey960
intel-agilex
@@ -38,81 +38,19 @@
xilinx-zynqmp
This section provides a list of supported upstream *platform ports* and the
-documentation associated with them. The list of suported Arm |FVP| platforms is
-outlined in the following section.
+documentation associated with them.
.. note::
In addition to the platforms ports listed within the table of contents, there
are several additional platforms that are supported upstream but which do not
currently have associated documentation:
- - Arm Juno Software Development Platform. Various |AArch32| and |AArch64|
- builds of this release have been tested on r0, r1 and r2 variants of the
- `Juno Arm Development Platform`_.
- Arm Neoverse N1 System Development Platform (N1SDP)
- Arm Neoverse Reference Design N1 Edge (RD-N1-Edge) FVP
- Arm Neoverse Reference Design E1 Edge (RD-E1-Edge) FVP
- Arm SGI-575 and SGM-775
- MediaTek MT6795 and MT8173 SoCs
-Fixed Virtual Platform (FVP) Support
-------------------------------------
-
-The latest version of the AArch64 build of TF-A has been tested on the
-following Arm FVPs without shifted affinities, and that do not support threaded
-CPU cores (64-bit host machine only).
-
-.. note::
- The FVP models used are Version 11.6 Build 45, unless otherwise stated.
-
-- ``FVP_Base_AEMv8A-AEMv8A``
-- ``FVP_Base_AEMv8A-AEMv8A-AEMv8A-AEMv8A-CCN502``
-- ``FVP_Base_RevC-2xAEMv8A``
-- ``FVP_Base_Cortex-A32x4``
-- ``FVP_Base_Cortex-A35x4``
-- ``FVP_Base_Cortex-A53x4``
-- ``FVP_Base_Cortex-A55x4+Cortex-A75x4``
-- ``FVP_Base_Cortex-A55x4``
-- ``FVP_Base_Cortex-A57x1-A53x1``
-- ``FVP_Base_Cortex-A57x2-A53x4``
-- ``FVP_Base_Cortex-A57x4-A53x4``
-- ``FVP_Base_Cortex-A57x4``
-- ``FVP_Base_Cortex-A72x4-A53x4``
-- ``FVP_Base_Cortex-A72x4``
-- ``FVP_Base_Cortex-A73x4-A53x4``
-- ``FVP_Base_Cortex-A73x4``
-- ``FVP_Base_Cortex-A75x4``
-- ``FVP_Base_Cortex-A76x4``
-- ``FVP_Base_Cortex-A76AEx4`` (Tested with internal model)
-- ``FVP_Base_Cortex-A76AEx8`` (Tested with internal model)
-- ``FVP_Base_Cortex-A77x4`` (Version 11.7 build 36)
-- ``FVP_Base_Zeusx4``
-- ``FVP_Base_Neoverse-N1x4`` (Tested with internal model)
-- ``FVP_CSS_SGI-575`` (Version 11.3 build 42)
-- ``FVP_CSS_SGM-775`` (Version 11.3 build 42)
-- ``FVP_RD_E1Edge`` (Version 11.3 build 42)
-- ``FVP_RD_N1Edge`` (Version 11.3 build 42)
-- ``Foundation_Platform``
-
-The latest version of the AArch32 build of TF-A has been tested on the
-following Arm FVPs without shifted affinities, and that do not support threaded
-CPU cores (64-bit host machine only).
-
-- ``FVP_Base_AEMv8A-AEMv8A``
-- ``FVP_Base_Cortex-A32x4``
-
-.. note::
- The ``FVP_Base_RevC-2xAEMv8A`` FVP only supports shifted affinities.
-
-The *Foundation* and *Base* FVPs can be downloaded free of charge. See the
-`Arm FVP website`_.
-
-All the above platforms have been tested with `Linaro Release 19.06`_.
-
--------------
*Copyright (c) 2019, Arm Limited. All rights reserved.*
-
-.. _Juno Arm Development Platform: http://www.arm.com/products/tools/development-boards/versatile-express/juno-arm-development-platform.php
-.. _Arm FVP website: https://developer.arm.com/products/system-design/fixed-virtual-platforms
-.. _Linaro Release 19.06: http://releases.linaro.org/members/arm/platforms/19.06
diff --git a/docs/plat/marvell/build.rst b/docs/plat/marvell/build.rst
index c8923e4..c10bcff 100644
--- a/docs/plat/marvell/build.rst
+++ b/docs/plat/marvell/build.rst
@@ -194,8 +194,8 @@
can interrupt UART recovery process). This MACRO definition is set in
``plat/marvell/a8k/common/include/platform_def.h`` file.
-For more information about build options, please refer to section
-'Summary of build options' in the :ref:`User Guide`.
+For more information about build options, please refer to the
+:ref:`Build Options` document.
Build output
@@ -251,4 +251,3 @@
(use the "mv_ddr-armada-atf-mainline" branch):
https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git
-
diff --git a/docs/plat/socionext-uniphier.rst b/docs/plat/socionext-uniphier.rst
index 964dd1d..9288193 100644
--- a/docs/plat/socionext-uniphier.rst
+++ b/docs/plat/socionext-uniphier.rst
@@ -80,7 +80,8 @@
- Trusted Board Boot
`mbed TLS`_ is needed as the cryptographic and image parser modules.
- Refer to the :ref:`User Guide` for the appropriate version of mbed TLS.
+ Refer to the :ref:`Prerequisites` document for the appropriate version of
+ mbed TLS.
To enable TBB, add the following options to the build command::