Merge "morello: Add Morello platform documentation" into integration
diff --git a/fdts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi b/fdts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi
index 11e8f2b..c0fc1f7 100644
--- a/fdts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi
+++ b/fdts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi
@@ -1,24 +1,23 @@
// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
/*
* Copyright (C) 2018, STMicroelectronics - All Rights Reserved
- *
- * STM32MP157C DK1/DK2 BOARD configuration
- * 1x DDR3L 4Gb, 16-bit, 533MHz.
- * Reference used NT5CC256M16DP-DI from NANYA
+ */
+
+/*
+ * File generated by STMicroelectronics STM32CubeMX DDR Tool for MPUs
+ * DDR type: DDR3 / DDR3L
+ * DDR width: 16bits
+ * DDR density: 4Gb
+ * System frequency: 533000Khz
+ * Relaxed Timing Mode: false
+ * Address mapping type: RBC
*
- * DDR type / Platform DDR3/3L
- * freq 533MHz
- * width 16
- * datasheet 0 = MT41J256M16-187 / DDR3-1066 bin G
- * DDR density 4
- * timing mode optimized
- * Scheduling/QoS options : type = 2
- * address mapping : RBC
- * Tc > + 85C : N
+ * Save Date: 2020.02.20, save Time: 18:45:20
*/
-#define DDR_MEM_NAME "DDR3-1066/888 bin G 1x4Gb 533MHz v1.45"
-#define DDR_MEM_SPEED 533000
-#define DDR_MEM_SIZE 0x20000000
+
+#define DDR_MEM_NAME "DDR3-DDR3L 16bits 533000Khz"
+#define DDR_MEM_SPEED 533000
+#define DDR_MEM_SIZE 0x20000000
#define DDR_MSTR 0x00041401
#define DDR_MRCTRL0 0x00000010
@@ -50,15 +49,6 @@
#define DDR_DFIUPD1 0x00000000
#define DDR_DFIUPD2 0x00000000
#define DDR_DFIPHYMSTR 0x00000000
-#define DDR_ADDRMAP1 0x00070707
-#define DDR_ADDRMAP2 0x00000000
-#define DDR_ADDRMAP3 0x1F000000
-#define DDR_ADDRMAP4 0x00001F1F
-#define DDR_ADDRMAP5 0x06060606
-#define DDR_ADDRMAP6 0x0F060606
-#define DDR_ADDRMAP9 0x00000000
-#define DDR_ADDRMAP10 0x00000000
-#define DDR_ADDRMAP11 0x00000000
#define DDR_ODTCFG 0x06000600
#define DDR_ODTMAP 0x00000001
#define DDR_SCHED 0x00000C01
@@ -83,6 +73,15 @@
#define DDR_PCFGQOS1_1 0x00800040
#define DDR_PCFGWQOS0_1 0x01100C03
#define DDR_PCFGWQOS1_1 0x01000200
+#define DDR_ADDRMAP1 0x00070707
+#define DDR_ADDRMAP2 0x00000000
+#define DDR_ADDRMAP3 0x1F000000
+#define DDR_ADDRMAP4 0x00001F1F
+#define DDR_ADDRMAP5 0x06060606
+#define DDR_ADDRMAP6 0x0F060606
+#define DDR_ADDRMAP9 0x00000000
+#define DDR_ADDRMAP10 0x00000000
+#define DDR_ADDRMAP11 0x00000000
#define DDR_PGCR 0x01442E02
#define DDR_PTR0 0x0022AA5B
#define DDR_PTR1 0x04841104
diff --git a/fdts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi b/fdts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi
index 4b70b60..fc226d2 100644
--- a/fdts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi
+++ b/fdts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi
@@ -1,24 +1,23 @@
// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
/*
* Copyright (C) 2018, STMicroelectronics - All Rights Reserved
- *
- * STM32MP157C ED1 BOARD configuration
- * 2x DDR3L 4Gb each, 16-bit, 533MHz, Single Die Package in flyby topology.
- * Reference used NT5CC256M16DP-DI from NANYA
+ */
+
+/*
+ * File generated by STMicroelectronics STM32CubeMX DDR Tool for MPUs
+ * DDR type: DDR3 / DDR3L
+ * DDR width: 32bits
+ * DDR density: 8Gb
+ * System frequency: 533000Khz
+ * Relaxed Timing Mode: false
+ * Address mapping type: RBC
*
- * DDR type / Platform DDR3/3L
- * freq 533MHz
- * width 32
- * datasheet 0 = MT41J256M16-187 / DDR3-1066 bin G
- * DDR density 8
- * timing mode optimized
- * Scheduling/QoS options : type = 2
- * address mapping : RBC
- * Tc > + 85C : N
+ * Save Date: 2020.02.20, save Time: 18:49:33
*/
-#define DDR_MEM_NAME "DDR3-1066/888 bin G 2x4Gb 533MHz v1.45"
-#define DDR_MEM_SPEED 533000
-#define DDR_MEM_SIZE 0x40000000
+
+#define DDR_MEM_NAME "DDR3-DDR3L 32bits 533000Khz"
+#define DDR_MEM_SPEED 533000
+#define DDR_MEM_SIZE 0x40000000
#define DDR_MSTR 0x00040401
#define DDR_MRCTRL0 0x00000010
@@ -50,15 +49,6 @@
#define DDR_DFIUPD1 0x00000000
#define DDR_DFIUPD2 0x00000000
#define DDR_DFIPHYMSTR 0x00000000
-#define DDR_ADDRMAP1 0x00080808
-#define DDR_ADDRMAP2 0x00000000
-#define DDR_ADDRMAP3 0x00000000
-#define DDR_ADDRMAP4 0x00001F1F
-#define DDR_ADDRMAP5 0x07070707
-#define DDR_ADDRMAP6 0x0F070707
-#define DDR_ADDRMAP9 0x00000000
-#define DDR_ADDRMAP10 0x00000000
-#define DDR_ADDRMAP11 0x00000000
#define DDR_ODTCFG 0x06000600
#define DDR_ODTMAP 0x00000001
#define DDR_SCHED 0x00000C01
@@ -83,6 +73,15 @@
#define DDR_PCFGQOS1_1 0x00800040
#define DDR_PCFGWQOS0_1 0x01100C03
#define DDR_PCFGWQOS1_1 0x01000200
+#define DDR_ADDRMAP1 0x00080808
+#define DDR_ADDRMAP2 0x00000000
+#define DDR_ADDRMAP3 0x00000000
+#define DDR_ADDRMAP4 0x00001F1F
+#define DDR_ADDRMAP5 0x07070707
+#define DDR_ADDRMAP6 0x0F070707
+#define DDR_ADDRMAP9 0x00000000
+#define DDR_ADDRMAP10 0x00000000
+#define DDR_ADDRMAP11 0x00000000
#define DDR_PGCR 0x01442E02
#define DDR_PTR0 0x0022AA5B
#define DDR_PTR1 0x04841104
diff --git a/fdts/stm32mp15-pinctrl.dtsi b/fdts/stm32mp15-pinctrl.dtsi
new file mode 100644
index 0000000..d3d1744
--- /dev/null
+++ b/fdts/stm32mp15-pinctrl.dtsi
@@ -0,0 +1,292 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+
+&pinctrl {
+ fmc_pins_a: fmc-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
+ <STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */
+ <STM32_PINMUX('D', 11, AF12)>, /* FMC_A16_FMC_CLE */
+ <STM32_PINMUX('D', 12, AF12)>, /* FMC_A17_FMC_ALE */
+ <STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */
+ <STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */
+ <STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */
+ <STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */
+ <STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */
+ <STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */
+ <STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */
+ <STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */
+ <STM32_PINMUX('G', 9, AF12)>; /* FMC_NE2_FMC_NCE */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('D', 6, AF12)>; /* FMC_NWAIT */
+ bias-pull-up;
+ };
+ };
+
+ qspi_clk_pins_a: qspi-clk-0 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ };
+
+ qspi_bk1_pins_a: qspi-bk1-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
+ <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
+ <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
+ <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
+ bias-pull-up;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+ };
+
+ qspi_bk2_pins_a: qspi-bk2-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */
+ <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */
+ <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */
+ <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */
+ bias-pull-up;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+ };
+
+ rtc_out2_rmp_pins_a: rtc-out2-rmp-pins-0 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 8, ANALOG)>; /* RTC_OUT2_RMP */
+ };
+ };
+
+ sdmmc1_b4_pins_a: sdmmc1-b4-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+ <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+ slew-rate = <2>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ sdmmc1_dir_pins_a: sdmmc1-dir-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
+ <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
+ <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ pins2{
+ pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
+ bias-pull-up;
+ };
+ };
+
+ sdmmc2_b4_pins_a: sdmmc2-b4-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+ <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+ slew-rate = <2>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ };
+
+ sdmmc2_b4_pins_b: sdmmc2-b4-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+ <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+ slew-rate = <2>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ sdmmc2_d47_pins_a: sdmmc2-d47-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+ <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+ <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
+ <STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ };
+
+ uart4_pins_a: uart4-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+ bias-disable;
+ };
+ };
+
+ uart4_pins_b: uart4-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+ bias-disable;
+ };
+ };
+
+ uart7_pins_a: uart7-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART4_RX */
+ <STM32_PINMUX('E', 10, AF7)>, /* UART4_CTS */
+ <STM32_PINMUX('E', 9, AF7)>; /* UART4_RTS */
+ bias-disable;
+ };
+ };
+
+ uart7_pins_b: uart7-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('E', 8, AF7)>; /* USART7_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('E', 7, AF7)>; /* USART7_RX */
+ bias-disable;
+ };
+ };
+
+ usart2_pins_a: usart2-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('D', 5, AF7)>, /* USART2_TX */
+ <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('D', 6, AF7)>, /* USART2_RX */
+ <STM32_PINMUX('D', 3, AF7)>; /* USART2_CTS_NSS */
+ bias-disable;
+ };
+ };
+
+ usart3_pins_a: usart3-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+ <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
+ <STM32_PINMUX('I', 10, AF8)>; /* USART3_CTS_NSS */
+ bias-disable;
+ };
+ };
+
+ usart3_pins_b: usart3-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+ <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
+ <STM32_PINMUX('B', 13, AF7)>; /* USART3_CTS_NSS */
+ bias-disable;
+ };
+ };
+
+ usbotg_hs_pins_a: usbotg_hs-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 10, ANALOG)>; /* OTG_ID */
+ };
+ };
+
+ usbotg_fs_dp_dm_pins_a: usbotg-fs-dp-dm-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* OTG_FS_DM */
+ <STM32_PINMUX('A', 12, ANALOG)>; /* OTG_FS_DP */
+ };
+ };
+};
+
+&pinctrl_z {
+ i2c4_pins_a: i2c4-0 {
+ pins {
+ pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */
+ <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+};
diff --git a/fdts/stm32mp151.dtsi b/fdts/stm32mp151.dtsi
new file mode 100644
index 0000000..2eb4a39
--- /dev/null
+++ b/fdts/stm32mp151.dtsi
@@ -0,0 +1,612 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/stm32mp1-clks.h>
+#include <dt-bindings/reset/stm32mp1-resets.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ intc: interrupt-controller@a0021000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0xa0021000 0x1000>,
+ <0xa0022000 0x2000>;
+ };
+
+ clocks {
+ clk_hse: clk-hse {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ clk_hsi: clk-hsi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <64000000>;
+ };
+
+ clk_lse: clk-lse {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ clk_lsi: clk-lsi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
+ };
+
+ clk_csi: clk-csi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <4000000>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&intc>;
+ ranges;
+
+ timers12: timer@40006000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40006000 0x400>;
+ clocks = <&rcc TIM12_K>;
+ clock-names = "int";
+ status = "disabled";
+ };
+
+ usart2: serial@4000e000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x4000e000 0x400>;
+ interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART2_K>;
+ resets = <&rcc USART2_R>;
+ status = "disabled";
+ };
+
+ usart3: serial@4000f000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x4000f000 0x400>;
+ interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART3_K>;
+ resets = <&rcc USART3_R>;
+ status = "disabled";
+ };
+
+ uart4: serial@40010000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40010000 0x400>;
+ interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART4_K>;
+ resets = <&rcc UART4_R>;
+ wakeup-source;
+ status = "disabled";
+ };
+
+ uart5: serial@40011000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40011000 0x400>;
+ interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART5_K>;
+ resets = <&rcc UART5_R>;
+ status = "disabled";
+ };
+
+ uart7: serial@40018000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40018000 0x400>;
+ interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART7_K>;
+ resets = <&rcc UART7_R>;
+ status = "disabled";
+ };
+
+ uart8: serial@40019000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40019000 0x400>;
+ interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART8_K>;
+ resets = <&rcc UART8_R>;
+ status = "disabled";
+ };
+
+ usart6: serial@44003000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x44003000 0x400>;
+ interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART6_K>;
+ resets = <&rcc USART6_R>;
+ status = "disabled";
+ };
+
+ timers15: timer@44006000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x44006000 0x400>;
+ clocks = <&rcc TIM15_K>;
+ clock-names = "int";
+ status = "disabled";
+ };
+
+ usbotg_hs: usb-otg@49000000 {
+ compatible = "st,stm32mp1-hsotg", "snps,dwc2";
+ reg = <0x49000000 0x10000>;
+ clocks = <&rcc USBO_K>;
+ clock-names = "otg";
+ resets = <&rcc USBO_R>;
+ reset-names = "dwc2";
+ interrupts-extended = <&exti 44 IRQ_TYPE_LEVEL_HIGH>;
+ g-rx-fifo-size = <512>;
+ g-np-tx-fifo-size = <32>;
+ g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
+ dr_mode = "otg";
+ usb33d-supply = <&usb33>;
+ status = "disabled";
+ };
+
+ rcc: rcc@50000000 {
+ compatible = "st,stm32mp1-rcc", "syscon";
+ reg = <0x50000000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ secure-interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+ secure-interrupt-names = "wakeup";
+ };
+
+ pwr_regulators: pwr@50001000 {
+ compatible = "st,stm32mp1,pwr-reg";
+ reg = <0x50001000 0x10>;
+ st,tzcr = <&rcc 0x0 0x1>;
+
+ reg11: reg11 {
+ regulator-name = "reg11";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ reg18: reg18 {
+ regulator-name = "reg18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ usb33: usb33 {
+ regulator-name = "usb33";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+
+ pwr_mcu: pwr_mcu@50001014 {
+ compatible = "st,stm32mp151-pwr-mcu", "syscon";
+ reg = <0x50001014 0x4>;
+ };
+
+ pwr_irq: pwr@50001020 {
+ compatible = "st,stm32mp1-pwr";
+ reg = <0x50001020 0x100>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+
+ exti: interrupt-controller@5000d000 {
+ compatible = "st,stm32mp1-exti", "syscon";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x5000d000 0x400>;
+
+ /* exti_pwr is an extra interrupt controller used for
+ * EXTI 55 to 60. It's mapped on pwr interrupt
+ * controller.
+ */
+ exti_pwr: exti-pwr {
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&pwr_irq>;
+ st,irq-number = <6>;
+ };
+ };
+
+ syscfg: syscon@50020000 {
+ compatible = "st,stm32mp157-syscfg", "syscon";
+ reg = <0x50020000 0x400>;
+ clocks = <&rcc SYSCFG>;
+ };
+
+ hash1: hash@54002000 {
+ compatible = "st,stm32f756-hash";
+ reg = <0x54002000 0x400>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc HASH1>;
+ resets = <&rcc HASH1_R>;
+ status = "disabled";
+ };
+
+ rng1: rng@54003000 {
+ compatible = "st,stm32-rng";
+ reg = <0x54003000 0x400>;
+ clocks = <&rcc RNG1_K>;
+ resets = <&rcc RNG1_R>;
+ status = "disabled";
+ };
+
+ fmc: nand-controller@58002000 {
+ compatible = "st,stm32mp15-fmc2";
+ reg = <0x58002000 0x1000>,
+ <0x80000000 0x1000>,
+ <0x88010000 0x1000>,
+ <0x88020000 0x1000>,
+ <0x81000000 0x1000>,
+ <0x89010000 0x1000>,
+ <0x89020000 0x1000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc FMC_K>;
+ resets = <&rcc FMC_R>;
+ status = "disabled";
+ };
+
+ qspi: spi@58003000 {
+ compatible = "st,stm32f469-qspi";
+ reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
+ reg-names = "qspi", "qspi_mm";
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc QSPI_K>;
+ resets = <&rcc QSPI_R>;
+ status = "disabled";
+ };
+
+ sdmmc1: sdmmc@58005000 {
+ compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x00253180>;
+ reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&rcc SDMMC1_K>;
+ clock-names = "apb_pclk";
+ resets = <&rcc SDMMC1_R>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <120000000>;
+ status = "disabled";
+ };
+
+ sdmmc2: sdmmc@58007000 {
+ compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x00253180>;
+ reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&rcc SDMMC2_K>;
+ clock-names = "apb_pclk";
+ resets = <&rcc SDMMC2_R>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <120000000>;
+ status = "disabled";
+ };
+
+ iwdg2: watchdog@5a002000 {
+ compatible = "st,stm32mp1-iwdg";
+ reg = <0x5a002000 0x400>;
+ secure-interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc IWDG2>, <&rcc CK_LSI>;
+ clock-names = "pclk", "lsi";
+ status = "disabled";
+ };
+
+ usbphyc: usbphyc@5a006000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <0>;
+ compatible = "st,stm32mp1-usbphyc";
+ reg = <0x5a006000 0x1000>;
+ clocks = <&rcc USBPHY_K>;
+ resets = <&rcc USBPHY_R>;
+ vdda1v1-supply = <®11>;
+ vdda1v8-supply = <®18>;
+ status = "disabled";
+
+ usbphyc_port0: usb-phy@0 {
+ #phy-cells = <0>;
+ reg = <0>;
+ };
+
+ usbphyc_port1: usb-phy@1 {
+ #phy-cells = <1>;
+ reg = <1>;
+ };
+ };
+
+ usart1: serial@5c000000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x5c000000 0x400>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART1_K>;
+ resets = <&rcc USART1_R>;
+ status = "disabled";
+ };
+
+ spi6: spi@5c001000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32h7-spi";
+ reg = <0x5c001000 0x400>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SPI6_K>;
+ resets = <&rcc SPI6_R>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@5c002000 {
+ compatible = "st,stm32mp15-i2c";
+ reg = <0x5c002000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts-extended = <&exti 24 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C4_K>;
+ resets = <&rcc I2C4_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ st,syscfg-fmp = <&syscfg 0x4 0x8>;
+ wakeup-source;
+ status = "disabled";
+ };
+
+ iwdg1: watchdog@5c003000 {
+ compatible = "st,stm32mp1-iwdg";
+ reg = <0x5C003000 0x400>;
+ interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc IWDG1>, <&rcc CK_LSI>;
+ clock-names = "pclk", "lsi";
+ status = "disabled";
+ };
+
+ rtc: rtc@5c004000 {
+ compatible = "st,stm32mp1-rtc";
+ reg = <0x5c004000 0x400>;
+ clocks = <&rcc RTCAPB>, <&rcc RTC>;
+ clock-names = "pclk", "rtc_ck";
+ interrupts-extended = <&exti 19 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ bsec: nvmem@5c005000 {
+ compatible = "st,stm32mp15-bsec";
+ reg = <0x5c005000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ts_cal1: calib@5c {
+ reg = <0x5c 0x2>;
+ };
+ ts_cal2: calib@5e {
+ reg = <0x5e 0x2>;
+ };
+ };
+
+ etzpc: etzpc@5c007000 {
+ compatible = "st,stm32-etzpc";
+ reg = <0x5C007000 0x400>;
+ clocks = <&rcc TZPC>;
+ status = "disabled";
+ secure-status = "okay";
+ };
+
+ stgen: stgen@5c008000 {
+ compatible = "st,stm32-stgen";
+ reg = <0x5C008000 0x1000>;
+ };
+
+ i2c6: i2c@5c009000 {
+ compatible = "st,stm32mp15-i2c";
+ reg = <0x5c009000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts-extended = <&exti 54 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C6_K>;
+ resets = <&rcc I2C6_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ st,syscfg-fmp = <&syscfg 0x4 0x20>;
+ wakeup-source;
+ status = "disabled";
+ };
+
+ tamp: tamp@5c00a000 {
+ compatible = "st,stm32-tamp", "simple-bus", "syscon", "simple-mfd";
+ reg = <0x5c00a000 0x400>;
+ secure-interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc RTCAPB>;
+ };
+
+ /*
+ * Break node order to solve dependency probe issue between
+ * pinctrl and exti.
+ */
+ pinctrl: pin-controller@50002000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stm32mp157-pinctrl";
+ ranges = <0 0x50002000 0xa400>;
+ interrupt-parent = <&exti>;
+ st,syscfg = <&exti 0x60 0xff>;
+ pins-are-numbered;
+
+ gpioa: gpio@50002000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x0 0x400>;
+ clocks = <&rcc GPIOA>;
+ st,bank-name = "GPIOA";
+ status = "disabled";
+ };
+
+ gpiob: gpio@50003000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1000 0x400>;
+ clocks = <&rcc GPIOB>;
+ st,bank-name = "GPIOB";
+ status = "disabled";
+ };
+
+ gpioc: gpio@50004000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x2000 0x400>;
+ clocks = <&rcc GPIOC>;
+ st,bank-name = "GPIOC";
+ status = "disabled";
+ };
+
+ gpiod: gpio@50005000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x3000 0x400>;
+ clocks = <&rcc GPIOD>;
+ st,bank-name = "GPIOD";
+ status = "disabled";
+ };
+
+ gpioe: gpio@50006000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x4000 0x400>;
+ clocks = <&rcc GPIOE>;
+ st,bank-name = "GPIOE";
+ status = "disabled";
+ };
+
+ gpiof: gpio@50007000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x5000 0x400>;
+ clocks = <&rcc GPIOF>;
+ st,bank-name = "GPIOF";
+ status = "disabled";
+ };
+
+ gpiog: gpio@50008000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x6000 0x400>;
+ clocks = <&rcc GPIOG>;
+ st,bank-name = "GPIOG";
+ status = "disabled";
+ };
+
+ gpioh: gpio@50009000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x7000 0x400>;
+ clocks = <&rcc GPIOH>;
+ st,bank-name = "GPIOH";
+ status = "disabled";
+ };
+
+ gpioi: gpio@5000a000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x8000 0x400>;
+ clocks = <&rcc GPIOI>;
+ st,bank-name = "GPIOI";
+ status = "disabled";
+ };
+
+ gpioj: gpio@5000b000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x9000 0x400>;
+ clocks = <&rcc GPIOJ>;
+ st,bank-name = "GPIOJ";
+ status = "disabled";
+ };
+
+ gpiok: gpio@5000c000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0xa000 0x400>;
+ clocks = <&rcc GPIOK>;
+ st,bank-name = "GPIOK";
+ status = "disabled";
+ };
+ };
+
+ pinctrl_z: pin-controller-z@54004000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stm32mp157-z-pinctrl";
+ ranges = <0 0x54004000 0x400>;
+ pins-are-numbered;
+ interrupt-parent = <&exti>;
+ st,syscfg = <&exti 0x60 0xff>;
+
+ gpioz: gpio@54004000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0 0x400>;
+ clocks = <&rcc GPIOZ>;
+ st,bank-name = "GPIOZ";
+ st,bank-ioport = <11>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/fdts/stm32mp153.dtsi b/fdts/stm32mp153.dtsi
new file mode 100644
index 0000000..0a0bb8d
--- /dev/null
+++ b/fdts/stm32mp153.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#include "stm32mp151.dtsi"
+
+/ {
+ cpus {
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <1>;
+ clocks = <&rcc CK_MPU>;
+ clock-names = "cpu";
+ };
+ };
+};
diff --git a/fdts/stm32mp157-pinctrl.dtsi b/fdts/stm32mp157-pinctrl.dtsi
deleted file mode 100644
index 7fd902b..0000000
--- a/fdts/stm32mp157-pinctrl.dtsi
+++ /dev/null
@@ -1,373 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2017-2019 - All Rights Reserved
- * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
- */
-#include <dt-bindings/pinctrl/stm32-pinfunc.h>
-
-/ {
- soc {
- pinctrl: pin-controller@50002000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "st,stm32mp157-pinctrl";
- ranges = <0 0x50002000 0xa400>;
- pins-are-numbered;
-
- gpioa: gpio@50002000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x0 0x400>;
- clocks = <&rcc GPIOA>;
- st,bank-name = "GPIOA";
- status = "disabled";
- };
-
- gpiob: gpio@50003000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x1000 0x400>;
- clocks = <&rcc GPIOB>;
- st,bank-name = "GPIOB";
- status = "disabled";
- };
-
- gpioc: gpio@50004000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x2000 0x400>;
- clocks = <&rcc GPIOC>;
- st,bank-name = "GPIOC";
- status = "disabled";
- };
-
- gpiod: gpio@50005000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x3000 0x400>;
- clocks = <&rcc GPIOD>;
- st,bank-name = "GPIOD";
- status = "disabled";
- };
-
- gpioe: gpio@50006000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x4000 0x400>;
- clocks = <&rcc GPIOE>;
- st,bank-name = "GPIOE";
- status = "disabled";
- };
-
- gpiof: gpio@50007000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x5000 0x400>;
- clocks = <&rcc GPIOF>;
- st,bank-name = "GPIOF";
- status = "disabled";
- };
-
- gpiog: gpio@50008000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x6000 0x400>;
- clocks = <&rcc GPIOG>;
- st,bank-name = "GPIOG";
- status = "disabled";
- };
-
- gpioh: gpio@50009000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x7000 0x400>;
- clocks = <&rcc GPIOH>;
- st,bank-name = "GPIOH";
- status = "disabled";
- };
-
- gpioi: gpio@5000a000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x8000 0x400>;
- clocks = <&rcc GPIOI>;
- st,bank-name = "GPIOI";
- status = "disabled";
- };
-
- gpioj: gpio@5000b000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x9000 0x400>;
- clocks = <&rcc GPIOJ>;
- st,bank-name = "GPIOJ";
- status = "disabled";
- };
-
- gpiok: gpio@5000c000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0xa000 0x400>;
- clocks = <&rcc GPIOK>;
- st,bank-name = "GPIOK";
- status = "disabled";
- };
-
- fmc_pins_a: fmc-0 {
- pins1 {
- pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
- <STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */
- <STM32_PINMUX('D', 11, AF12)>, /* FMC_A16_FMC_CLE */
- <STM32_PINMUX('D', 12, AF12)>, /* FMC_A17_FMC_ALE */
- <STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */
- <STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */
- <STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */
- <STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */
- <STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */
- <STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */
- <STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */
- <STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */
- <STM32_PINMUX('G', 9, AF12)>; /* FMC_NE2_FMC_NCE */
- bias-disable;
- drive-push-pull;
- slew-rate = <1>;
- };
- pins2 {
- pinmux = <STM32_PINMUX('D', 6, AF12)>; /* FMC_NWAIT */
- bias-pull-up;
- };
- };
-
- qspi_bk1_pins_a: qspi-bk1-0 {
- pins1 {
- pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
- <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
- <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
- <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
- bias-disable;
- drive-push-pull;
- slew-rate = <1>;
- };
- pins2 {
- pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
- bias-pull-up;
- drive-push-pull;
- slew-rate = <1>;
- };
- };
-
- qspi_bk2_pins_a: qspi-bk2-0 {
- pins1 {
- pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */
- <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */
- <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */
- <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */
- bias-disable;
- drive-push-pull;
- slew-rate = <1>;
- };
- pins2 {
- pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */
- bias-pull-up;
- drive-push-pull;
- slew-rate = <1>;
- };
- };
-
- qspi_clk_pins_a: qspi-clk-0 {
- pins {
- pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */
- bias-disable;
- drive-push-pull;
- slew-rate = <3>;
- };
- };
-
- sdmmc1_b4_pins_a: sdmmc1-b4-0 {
- pins1 {
- pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
- <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
- <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
- <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
- <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
- slew-rate = <1>;
- drive-push-pull;
- bias-disable;
- };
- pins2 {
- pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
- slew-rate = <2>;
- drive-push-pull;
- bias-disable;
- };
- };
-
- sdmmc1_dir_pins_a: sdmmc1-dir-0 {
- pins1 {
- pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
- <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
- <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
- slew-rate = <1>;
- drive-push-pull;
- bias-pull-up;
- };
- pins2{
- pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
- bias-pull-up;
- };
- };
-
- sdmmc2_b4_pins_a: sdmmc2-b4-0 {
- pins1 {
- pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
- <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
- <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
- <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
- <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
- slew-rate = <1>;
- drive-push-pull;
- bias-pull-up;
- };
- pins2 {
- pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
- slew-rate = <2>;
- drive-push-pull;
- bias-pull-up;
- };
- };
-
- sdmmc2_d47_pins_a: sdmmc2-d47-0 {
- pins {
- pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
- <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
- <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
- <STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */
- slew-rate = <1>;
- drive-push-pull;
- bias-pull-up;
- };
- };
-
- uart4_pins_a: uart4-0 {
- pins1 {
- pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
- bias-disable;
- drive-push-pull;
- slew-rate = <0>;
- };
- pins2 {
- pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
- bias-disable;
- };
- };
-
- uart4_pins_b: uart4-1 {
- pins1 {
- pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */
- bias-disable;
- drive-push-pull;
- slew-rate = <0>;
- };
- pins2 {
- pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
- bias-disable;
- };
- };
-
- uart7_pins_a: uart7-0 {
- pins1 {
- pinmux = <STM32_PINMUX('E', 8, AF7)>; /* USART7_TX */
- bias-disable;
- drive-push-pull;
- slew-rate = <0>;
- };
- pins2 {
- pinmux = <STM32_PINMUX('E', 7, AF7)>; /* USART7_RX */
- bias-disable;
- };
- };
-
- usart3_pins_a: usart3-0 {
- pins1 {
- pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
- <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
- bias-disable;
- drive-push-pull;
- slew-rate = <0>;
- };
- pins2 {
- pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
- <STM32_PINMUX('I', 10, AF8)>; /* USART3_CTS_NSS */
- bias-disable;
- };
- };
-
- usart3_pins_b: usart3-1 {
- pins1 {
- pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
- <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
- bias-disable;
- drive-push-pull;
- slew-rate = <0>;
- };
- pins2 {
- pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
- <STM32_PINMUX('B', 13, AF7)>; /* USART3_CTS_NSS */
- bias-disable;
- };
- };
- };
-
- pinctrl_z: pin-controller-z@54004000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "st,stm32mp157-z-pinctrl";
- ranges = <0 0x54004000 0x400>;
- pins-are-numbered;
-
- gpioz: gpio@54004000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0 0x400>;
- clocks = <&rcc GPIOZ>;
- st,bank-name = "GPIOZ";
- st,bank-ioport = <11>;
- status = "disabled";
- };
-
- i2c4_pins_a: i2c4-0 {
- pins {
- pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */
- <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */
- bias-disable;
- drive-open-drain;
- slew-rate = <0>;
- };
- };
- };
- };
-};
diff --git a/fdts/stm32mp157.dtsi b/fdts/stm32mp157.dtsi
new file mode 100644
index 0000000..c834029
--- /dev/null
+++ b/fdts/stm32mp157.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#include "stm32mp153.dtsi"
diff --git a/fdts/stm32mp157a-avenger96.dts b/fdts/stm32mp157a-avenger96.dts
index 907940c..b967736 100644
--- a/fdts/stm32mp157a-avenger96.dts
+++ b/fdts/stm32mp157a-avenger96.dts
@@ -9,21 +9,30 @@
/dts-v1/;
-#include "stm32mp157c.dtsi"
-#include "stm32mp157cac-pinctrl.dtsi"
+#include "stm32mp157.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include <dt-bindings/clock/stm32mp1-clksrc.h>
+#include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi"
/ {
model = "Arrow Electronics STM32MP157A Avenger96 board";
- compatible = "st,stm32mp157a-avenger96", "st,stm32mp157";
+ compatible = "arrow,stm32mp157a-avenger96", "st,stm32mp157";
aliases {
+ mmc0 = &sdmmc1;
serial0 = &uart4;
+ serial1 = &uart7;
};
chosen {
stdout-path = "serial0:115200n8";
};
+ memory@c0000000 {
+ device_type = "memory";
+ reg = <0xc0000000 0x40000000>;
+ };
};
&i2c4 {
@@ -43,16 +52,17 @@
st,main-control-register = <0x04>;
st,vin-control-register = <0xc0>;
- st,usb-control-register = <0x20>;
+ st,usb-control-register = <0x30>;
regulators {
compatible = "st,stpmic1-regulators";
-
ldo1-supply = <&v3v3>;
ldo2-supply = <&v3v3>;
ldo3-supply = <&vdd_ddr>;
ldo5-supply = <&v3v3>;
ldo6-supply = <&v3v3>;
+ pwr_sw1-supply = <&bst_out>;
+ pwr_sw2-supply = <&bst_out>;
vddcore: buck1 {
regulator-name = "vddcore";
@@ -135,6 +145,19 @@
regulator-always-on;
regulator-over-current-protection;
};
+
+ bst_out: boost {
+ regulator-name = "bst_out";
+ };
+
+ vbus_otg: pwr_sw1 {
+ regulator-name = "vbus_otg";
+ };
+
+ vbus_sw: pwr_sw2 {
+ regulator-name = "vbus_sw";
+ regulator-active-discharge = <1>;
+ };
};
};
};
@@ -142,56 +165,14 @@
&iwdg2 {
timeout-sec = <32>;
status = "okay";
-};
-
-&rng1 {
- status = "okay";
-};
-
-&rtc {
- status = "okay";
-};
-
-&sdmmc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
- broken-cd;
- st,sig-dir;
- st,neg-edge;
- st,use-ckin;
- bus-width = <4>;
- vmmc-supply = <&vdda>;
- status = "okay";
-};
-
-&uart4 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart4_pins_b>;
- status = "okay";
+ secure-status = "okay";
};
-/* ATF Specific */
-#include <dt-bindings/clock/stm32mp1-clksrc.h>
-#include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi"
-#include "stm32mp157c-security.dtsi"
-
-/ {
- aliases {
- gpio0 = &gpioa;
- gpio1 = &gpiob;
- gpio2 = &gpioc;
- gpio3 = &gpiod;
- gpio4 = &gpioe;
- gpio5 = &gpiof;
- gpio6 = &gpiog;
- gpio7 = &gpioh;
- gpio8 = &gpioi;
- gpio25 = &gpioz;
- i2c3 = &i2c4;
- };
+&pwr_regulators {
+ vdd-supply = <&vdd>;
+ vdd_3v3_usbfs-supply = <&vdd_usb>;
};
-/* CLOCK init */
&rcc {
secure-status = "disabled";
st,clksrc = <
@@ -260,24 +241,67 @@
/* VCO = 1300.0 MHz => P = 650 (CPU) */
pll1: st,pll@0 {
- cfg = < 2 80 0 0 0 PQR(1,0,0) >;
- frac = < 0x800 >;
+ compatible = "st,stm32mp1-pll";
+ reg = <0>;
+ cfg = <2 80 0 0 0 PQR(1,0,0)>;
+ frac = <0x800>;
};
/* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
pll2: st,pll@1 {
- cfg = < 2 65 1 0 0 PQR(1,1,1) >;
- frac = < 0x1400 >;
+ compatible = "st,stm32mp1-pll";
+ reg = <1>;
+ cfg = <2 65 1 0 0 PQR(1,1,1)>;
+ frac = <0x1400>;
};
/* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
pll3: st,pll@2 {
- cfg = < 1 33 1 16 36 PQR(1,1,1) >;
- frac = < 0x1a04 >;
+ compatible = "st,stm32mp1-pll";
+ reg = <2>;
+ cfg = <1 33 1 16 36 PQR(1,1,1)>;
+ frac = <0x1a04>;
};
/* VCO = 480.0 MHz => P = 120, Q = 40, R = 96 */
pll4: st,pll@3 {
- cfg = < 1 39 3 11 4 PQR(1,1,1) >;
+ compatible = "st,stm32mp1-pll";
+ reg = <3>;
+ cfg = <1 39 3 11 4 PQR(1,1,1)>;
};
};
+
+&rng1 {
+ status = "okay";
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sdmmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
+ st,sig-dir;
+ st,neg-edge;
+ st,use-ckin;
+ bus-width = <4>;
+ vmmc-supply = <&vdd_sd>;
+ status = "okay";
+};
+
+&uart4 {
+ /* On Low speed expansion header */
+ label = "LS-UART1";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins_b>;
+ status = "okay";
+};
+
+&uart7 {
+ /* On Low speed expansion header */
+ label = "LS-UART0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart7_pins_a>;
+ status = "okay";
+};
diff --git a/fdts/stm32mp157a-dk1.dts b/fdts/stm32mp157a-dk1.dts
index 4ea83f7..a73bef8 100644
--- a/fdts/stm32mp157a-dk1.dts
+++ b/fdts/stm32mp157a-dk1.dts
@@ -1,13 +1,15 @@
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
- * Copyright (C) STMicroelectronics 2018-2019 - All Rights Reserved
- * Author: Alexandre Torgue <alexandre.torgue@st.com>.
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
*/
/dts-v1/;
-#include "stm32mp157c.dtsi"
-#include "stm32mp157cac-pinctrl.dtsi"
+#include "stm32mp157.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include "stm32mp15xx-dkx.dtsi"
/ {
model = "STMicroelectronics STM32MP157A-DK1 Discovery Board";
@@ -22,290 +24,4 @@
chosen {
stdout-path = "serial0:115200n8";
};
-
-};
-
-&clk_hse {
- st,digbypass;
-};
-
-&i2c4 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c4_pins_a>;
- i2c-scl-rising-time-ns = <185>;
- i2c-scl-falling-time-ns = <20>;
- status = "okay";
-
- pmic: stpmic@33 {
- compatible = "st,stpmic1";
- reg = <0x33>;
- interrupts-extended = <&exti_pwr 55 IRQ_TYPE_EDGE_FALLING>;
- interrupt-controller;
- #interrupt-cells = <2>;
- status = "okay";
-
- st,main-control-register = <0x04>;
- st,vin-control-register = <0xc0>;
- st,usb-control-register = <0x20>;
-
- regulators {
- compatible = "st,stpmic1-regulators";
-
- ldo1-supply = <&v3v3>;
- ldo3-supply = <&vdd_ddr>;
- ldo6-supply = <&v3v3>;
-
- vddcore: buck1 {
- regulator-name = "vddcore";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-initial-mode = <0>;
- regulator-over-current-protection;
- };
-
- vdd_ddr: buck2 {
- regulator-name = "vdd_ddr";
- regulator-min-microvolt = <1350000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-initial-mode = <0>;
- regulator-over-current-protection;
- };
-
- vdd: buck3 {
- regulator-name = "vdd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- st,mask-reset;
- regulator-initial-mode = <0>;
- regulator-over-current-protection;
- };
-
- v3v3: buck4 {
- regulator-name = "v3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-over-current-protection;
- regulator-initial-mode = <0>;
- };
-
- v1v8_audio: ldo1 {
- regulator-name = "v1v8_audio";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- v3v3_hdmi: ldo2 {
- regulator-name = "v3v3_hdmi";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vtt_ddr: ldo3 {
- regulator-name = "vtt_ddr";
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <750000>;
- regulator-always-on;
- regulator-over-current-protection;
- };
-
- vdd_usb: ldo4 {
- regulator-name = "vdd_usb";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vdda: ldo5 {
- regulator-name = "vdda";
- regulator-min-microvolt = <2900000>;
- regulator-max-microvolt = <2900000>;
- regulator-boot-on;
- };
-
- v1v2_hdmi: ldo6 {
- regulator-name = "v1v2_hdmi";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- };
-
- vref_ddr: vref_ddr {
- regulator-name = "vref_ddr";
- regulator-always-on;
- regulator-over-current-protection;
- };
- };
- };
-};
-
-&iwdg2 {
- timeout-sec = <32>;
- status = "okay";
-};
-
-&pwr {
- pwr-regulators {
- vdd-supply = <&vdd>;
- };
-};
-
-&rng1 {
- status = "okay";
-};
-
-&rtc {
- status = "okay";
-};
-
-&sdmmc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc1_b4_pins_a>;
- broken-cd;
- st,neg-edge;
- bus-width = <4>;
- vmmc-supply = <&v3v3>;
- status = "okay";
-};
-
-&uart4 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart4_pins_a>;
- status = "okay";
-};
-
-&uart7 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart7_pins_a>;
- status = "disabled";
-};
-
-&usart3 {
- pinctrl-names = "default";
- pinctrl-0 = <&usart3_pins_b>;
- status = "disabled";
-};
-
-/* ATF Specific */
-#include <dt-bindings/clock/stm32mp1-clksrc.h>
-#include "stm32mp15-ddr3-1x4Gb-1066-binG.dtsi"
-#include "stm32mp157c-security.dtsi"
-
-/ {
- aliases {
- gpio0 = &gpioa;
- gpio1 = &gpiob;
- gpio2 = &gpioc;
- gpio3 = &gpiod;
- gpio4 = &gpioe;
- gpio5 = &gpiof;
- gpio6 = &gpiog;
- gpio7 = &gpioh;
- gpio8 = &gpioi;
- gpio25 = &gpioz;
- i2c3 = &i2c4;
- };
-};
-
-/* CLOCK init */
-&rcc {
- secure-status = "disabled";
- st,clksrc = <
- CLK_MPU_PLL1P
- CLK_AXI_PLL2P
- CLK_MCU_PLL3P
- CLK_PLL12_HSE
- CLK_PLL3_HSE
- CLK_PLL4_HSE
- CLK_RTC_LSE
- CLK_MCO1_DISABLED
- CLK_MCO2_DISABLED
- >;
-
- st,clkdiv = <
- 1 /*MPU*/
- 0 /*AXI*/
- 0 /*MCU*/
- 1 /*APB1*/
- 1 /*APB2*/
- 1 /*APB3*/
- 1 /*APB4*/
- 2 /*APB5*/
- 23 /*RTC*/
- 0 /*MCO1*/
- 0 /*MCO2*/
- >;
-
- st,pkcs = <
- CLK_CKPER_HSE
- CLK_FMC_ACLK
- CLK_QSPI_ACLK
- CLK_ETH_DISABLED
- CLK_SDMMC12_PLL4P
- CLK_DSI_DSIPLL
- CLK_STGEN_HSE
- CLK_USBPHY_HSE
- CLK_SPI2S1_PLL3Q
- CLK_SPI2S23_PLL3Q
- CLK_SPI45_HSI
- CLK_SPI6_HSI
- CLK_I2C46_HSI
- CLK_SDMMC3_PLL4P
- CLK_USBO_USBPHY
- CLK_ADC_CKPER
- CLK_CEC_LSE
- CLK_I2C12_HSI
- CLK_I2C35_HSI
- CLK_UART1_HSI
- CLK_UART24_HSI
- CLK_UART35_HSI
- CLK_UART6_HSI
- CLK_UART78_HSI
- CLK_SPDIF_PLL4P
- CLK_FDCAN_PLL4R
- CLK_SAI1_PLL3Q
- CLK_SAI2_PLL3Q
- CLK_SAI3_PLL3Q
- CLK_SAI4_PLL3Q
- CLK_RNG1_LSI
- CLK_RNG2_LSI
- CLK_LPTIM1_PCLK1
- CLK_LPTIM23_PCLK3
- CLK_LPTIM45_LSE
- >;
-
- /* VCO = 1300.0 MHz => P = 650 (CPU) */
- pll1: st,pll@0 {
- cfg = < 2 80 0 0 0 PQR(1,0,0) >;
- frac = < 0x800 >;
- };
-
- /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
- pll2: st,pll@1 {
- cfg = < 2 65 1 0 0 PQR(1,1,1) >;
- frac = < 0x1400 >;
- };
-
- /* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
- pll3: st,pll@2 {
- cfg = < 1 33 1 16 36 PQR(1,1,1) >;
- frac = < 0x1a04 >;
- };
-
- /* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */
- pll4: st,pll@3 {
- cfg = < 3 98 5 7 7 PQR(1,1,1) >;
- };
-};
-
-&bsec {
- board_id: board_id@ec {
- reg = <0xec 0x4>;
- status = "okay";
- secure-status = "okay";
- };
};
diff --git a/fdts/stm32mp157c-dk2.dts b/fdts/stm32mp157c-dk2.dts
index fdcf4c8..be8300e 100644
--- a/fdts/stm32mp157c-dk2.dts
+++ b/fdts/stm32mp157c-dk2.dts
@@ -1,16 +1,33 @@
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
- * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
- * Author: Alexandre Torgue <alexandre.torgue@st.com>.
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
*/
/dts-v1/;
-#include "stm32mp157a-dk1.dts"
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include "stm32mp15xx-dkx.dtsi"
/ {
model = "STMicroelectronics STM32MP157C-DK2 Discovery Board";
compatible = "st,stm32mp157c-dk2", "st,stm32mp157";
+ aliases {
+ serial0 = &uart4;
+ serial1 = &usart3;
+ serial2 = &uart7;
+ serial3 = &usart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
};
+&cryp1 {
+ status = "okay";
+};
diff --git a/fdts/stm32mp157c-ed1.dts b/fdts/stm32mp157c-ed1.dts
index 7794925..615e2cc 100644
--- a/fdts/stm32mp157c-ed1.dts
+++ b/fdts/stm32mp157c-ed1.dts
@@ -5,8 +5,12 @@
*/
/dts-v1/;
-#include "stm32mp157c.dtsi"
-#include "stm32mp157caa-pinctrl.dtsi"
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/clock/stm32mp1-clksrc.h>
+#include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi"
/ {
model = "STMicroelectronics STM32MP157C eval daughter";
@@ -16,20 +20,47 @@
stdout-path = "serial0:115200n8";
};
+
+ memory@c0000000 {
+ device_type = "memory";
+ reg = <0xC0000000 0x40000000>;
+ };
+
aliases {
serial0 = &uart4;
};
};
+&bsec {
+ board_id: board_id@ec {
+ reg = <0xec 0x4>;
+ status = "okay";
+ secure-status = "okay";
+ };
+};
+
&clk_hse {
st,digbypass;
};
+&cpu0 {
+ cpu-supply = <&vddcore>;
+};
+
+&cpu1 {
+ cpu-supply = <&vddcore>;
+};
+
+&cryp1 {
+ status="okay";
+};
+
&i2c4 {
pinctrl-names = "default";
pinctrl-0 = <&i2c4_pins_a>;
i2c-scl-rising-time-ns = <185>;
i2c-scl-falling-time-ns = <20>;
+ clock-frequency = <400000>;
status = "okay";
pmic: stpmic@33 {
@@ -40,18 +71,15 @@
#interrupt-cells = <2>;
status = "okay";
- st,main-control-register = <0x04>;
- st,vin-control-register = <0xc0>;
- st,usb-control-register = <0x20>;
-
regulators {
compatible = "st,stpmic1-regulators";
-
ldo1-supply = <&v3v3>;
ldo2-supply = <&v3v3>;
ldo3-supply = <&vdd_ddr>;
ldo5-supply = <&v3v3>;
ldo6-supply = <&v3v3>;
+ pwr_sw1-supply = <&bst_out>;
+ pwr_sw2-supply = <&bst_out>;
vddcore: buck1 {
regulator-name = "vddcore";
@@ -112,8 +140,6 @@
vdd_usb: ldo4 {
regulator-name = "vdd_usb";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
};
vdd_sd: ldo5 {
@@ -132,92 +158,45 @@
vref_ddr: vref_ddr {
regulator-name = "vref_ddr";
regulator-always-on;
- regulator-over-current-protection;
};
- };
- };
-};
-
-&iwdg2 {
- timeout-sec = <32>;
- status = "okay";
-};
-&pwr {
- pwr-regulators {
- vdd-supply = <&vdd>;
- };
-};
+ bst_out: boost {
+ regulator-name = "bst_out";
+ };
-&rng1 {
- status = "okay";
-};
+ vbus_otg: pwr_sw1 {
+ regulator-name = "vbus_otg";
+ };
-&rtc {
- status = "okay";
-};
+ vbus_sw: pwr_sw2 {
+ regulator-name = "vbus_sw";
+ regulator-active-discharge = <1>;
+ };
+ };
-&sdmmc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
- broken-cd;
- st,sig-dir;
- st,neg-edge;
- st,use-ckin;
- bus-width = <4>;
- vmmc-supply = <&vdd_sd>;
- sd-uhs-sdr12;
- sd-uhs-sdr25;
- sd-uhs-sdr50;
- sd-uhs-ddr50;
- sd-uhs-sdr104;
- status = "okay";
-};
+ onkey {
+ compatible = "st,stpmic1-onkey";
+ power-off-time-sec = <10>;
+ status = "okay";
+ };
-&sdmmc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
- non-removable;
- no-sd;
- no-sdio;
- st,neg-edge;
- bus-width = <8>;
- vmmc-supply = <&v3v3>;
- vqmmc-supply = <&v3v3>;
- mmc-ddr-3_3v;
- status = "okay";
+ watchdog {
+ compatible = "st,stpmic1-wdt";
+ status = "disabled";
+ };
+ };
};
-&uart4 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart4_pins_a>;
+&iwdg2 {
+ timeout-sec = <32>;
status = "okay";
};
-/* ATF Specific */
-#include <dt-bindings/clock/stm32mp1-clksrc.h>
-#include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi"
-#include "stm32mp157c-security.dtsi"
-
-/ {
- aliases {
- gpio0 = &gpioa;
- gpio1 = &gpiob;
- gpio2 = &gpioc;
- gpio3 = &gpiod;
- gpio4 = &gpioe;
- gpio5 = &gpiof;
- gpio6 = &gpiog;
- gpio7 = &gpioh;
- gpio8 = &gpioi;
- gpio9 = &gpioj;
- gpio10 = &gpiok;
- gpio25 = &gpioz;
- i2c3 = &i2c4;
- };
+&pwr_regulators {
+ vdd-supply = <&vdd>;
+ vdd_3v3_usbfs-supply = <&vdd_usb>;
};
-/* CLOCK init */
&rcc {
secure-status = "disabled";
st,clksrc = <
@@ -308,10 +287,46 @@
};
};
-&bsec {
- board_id: board_id@ec {
- reg = <0xec 0x4>;
- status = "okay";
- secure-status = "okay";
- };
+&rng1 {
+ status = "okay";
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sdmmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
+ disable-wp;
+ st,sig-dir;
+ st,neg-edge;
+ st,use-ckin;
+ bus-width = <4>;
+ vmmc-supply = <&vdd_sd>;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-ddr50;
+ status = "okay";
+};
+
+&sdmmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
+ non-removable;
+ no-sd;
+ no-sdio;
+ st,neg-edge;
+ bus-width = <8>;
+ vmmc-supply = <&v3v3>;
+ vqmmc-supply = <&vdd>;
+ mmc-ddr-3_3v;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins_a>;
+ status = "okay";
};
diff --git a/fdts/stm32mp157c-security.dtsi b/fdts/stm32mp157c-security.dtsi
deleted file mode 100644
index 165ffa0..0000000
--- a/fdts/stm32mp157c-security.dtsi
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Copyright (c) 2017-2019, STMicroelectronics - All Rights Reserved
- *
- * SPDX-License-Identifier: GPL-2.0+ BSD-3-Clause
- */
-
-/ {
- soc {
- stgen: stgen@5c008000 {
- compatible = "st,stm32-stgen";
- reg = <0x5C008000 0x1000>;
- status = "okay";
- };
- };
-};
-
-&bsec {
- mac_addr: mac_addr@e4 {
- reg = <0xe4 0x6>;
- status = "okay";
- secure-status = "okay";
- };
- /* Spare field to align on 32-bit OTP granularity */
- spare_ns_ea: spare_ns_ea@ea {
- reg = <0xea 0x2>;
- status = "okay";
- secure-status = "okay";
- };
-};
-
-&hash1 {
- secure-status = "okay";
-};
-
-&sdmmc1 {
- compatible = "st,stm32-sdmmc2";
-};
-
-&sdmmc2 {
- compatible = "st,stm32-sdmmc2";
-};
diff --git a/fdts/stm32mp157c.dtsi b/fdts/stm32mp157c.dtsi
deleted file mode 100644
index 91b20fa..0000000
--- a/fdts/stm32mp157c.dtsi
+++ /dev/null
@@ -1,374 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2017-2019 - All Rights Reserved
- * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
- */
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/stm32mp1-clks.h>
-#include <dt-bindings/reset/stm32mp1-resets.h>
-
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
-
- intc: interrupt-controller@a0021000 {
- compatible = "arm,cortex-a7-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0xa0021000 0x1000>,
- <0xa0022000 0x2000>;
- };
-
- clocks {
- clk_hse: clk-hse {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- };
-
- clk_hsi: clk-hsi {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <64000000>;
- };
-
- clk_lse: clk-lse {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <32768>;
- };
-
- clk_lsi: clk-lsi {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <32000>;
- };
-
- clk_csi: clk-csi {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <4000000>;
- };
-
- clk_i2s_ckin: i2s_ckin {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <0>;
- };
-
- clk_dsi_phy: ck_dsi_phy {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <0>;
- };
- };
-
- soc {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-parent = <&intc>;
- ranges;
-
- timers12: timer@40006000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x40006000 0x400>;
- clocks = <&rcc TIM12_K>;
- clock-names = "int";
- status = "disabled";
- };
-
- usart2: serial@4000e000 {
- compatible = "st,stm32h7-uart";
- reg = <0x4000e000 0x400>;
- clocks = <&rcc USART2_K>;
- resets = <&rcc USART2_R>;
- status = "disabled";
- };
-
- usart3: serial@4000f000 {
- compatible = "st,stm32h7-uart";
- reg = <0x4000f000 0x400>;
- clocks = <&rcc USART3_K>;
- resets = <&rcc USART3_R>;
- status = "disabled";
- };
-
- uart4: serial@40010000 {
- compatible = "st,stm32h7-uart";
- reg = <0x40010000 0x400>;
- clocks = <&rcc UART4_K>;
- resets = <&rcc UART4_R>;
- status = "disabled";
- };
-
- uart5: serial@40011000 {
- compatible = "st,stm32h7-uart";
- reg = <0x40011000 0x400>;
- clocks = <&rcc UART5_K>;
- resets = <&rcc UART5_R>;
- status = "disabled";
- };
-
-
- uart7: serial@40018000 {
- compatible = "st,stm32h7-uart";
- reg = <0x40018000 0x400>;
- clocks = <&rcc UART7_K>;
- resets = <&rcc UART7_R>;
- status = "disabled";
- };
-
- uart8: serial@40019000 {
- compatible = "st,stm32h7-uart";
- reg = <0x40019000 0x400>;
- clocks = <&rcc UART8_K>;
- resets = <&rcc UART8_R>;
- status = "disabled";
- };
-
- usart6: serial@44003000 {
- compatible = "st,stm32h7-uart";
- reg = <0x44003000 0x400>;
- clocks = <&rcc USART6_K>;
- resets = <&rcc USART6_R>;
- status = "disabled";
- };
-
- timers15: timer@44006000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x44006000 0x400>;
- clocks = <&rcc TIM15_K>;
- clock-names = "int";
- status = "disabled";
- };
-
- sdmmc3: sdmmc@48004000 {
- compatible = "arm,pl18x", "arm,primecell";
- arm,primecell-periphid = <0x00253180>;
- reg = <0x48004000 0x400>, <0x48005000 0x400>;
- clocks = <&rcc SDMMC3_K>;
- clock-names = "apb_pclk";
- resets = <&rcc SDMMC3_R>;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- max-frequency = <120000000>;
- status = "disabled";
- };
-
- usbotg_hs: usb-otg@49000000 {
- compatible = "st,stm32mp1-hsotg", "snps,dwc2";
- reg = <0x49000000 0x10000>;
- clocks = <&rcc USBO_K>;
- clock-names = "otg";
- resets = <&rcc USBO_R>;
- reset-names = "dwc2";
- status = "disabled";
- };
-
- rcc: rcc@50000000 {
- compatible = "st,stm32mp1-rcc", "syscon";
- reg = <0x50000000 0x1000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- pwr: pwr@50001000 {
- compatible = "st,stm32mp1-pwr", "syscon", "simple-mfd";
- reg = <0x50001000 0x400>;
- };
-
- exti: interrupt-controller@5000d000 {
- compatible = "st,stm32mp1-exti", "syscon";
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x5000d000 0x400>;
-
- /* exti_pwr is an extra interrupt controller used for
- * EXTI 55 to 60. It's mapped on pwr interrupt
- * controller.
- */
- exti_pwr: exti-pwr {
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&pwr>;
- st,irq-number = <6>;
- };
- };
-
- syscfg: syscon@50020000 {
- compatible = "st,stm32mp157-syscfg", "syscon";
- reg = <0x50020000 0x400>;
- clocks = <&rcc SYSCFG>;
- };
-
- cryp1: cryp@54001000 {
- compatible = "st,stm32mp1-cryp";
- reg = <0x54001000 0x400>;
- interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc CRYP1>;
- resets = <&rcc CRYP1_R>;
- status = "disabled";
- };
-
- hash1: hash@54002000 {
- compatible = "st,stm32f756-hash";
- reg = <0x54002000 0x400>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc HASH1>;
- resets = <&rcc HASH1_R>;
- status = "disabled";
- };
-
- rng1: rng@54003000 {
- compatible = "st,stm32-rng";
- reg = <0x54003000 0x400>;
- clocks = <&rcc RNG1_K>;
- resets = <&rcc RNG1_R>;
- status = "disabled";
- };
-
- fmc: nand-controller@58002000 {
- compatible = "st,stm32mp15-fmc2";
- reg = <0x58002000 0x1000>,
- <0x80000000 0x1000>,
- <0x88010000 0x1000>,
- <0x88020000 0x1000>,
- <0x81000000 0x1000>,
- <0x89010000 0x1000>,
- <0x89020000 0x1000>;
- clocks = <&rcc FMC_K>;
- resets = <&rcc FMC_R>;
- status = "disabled";
- };
-
- qspi: qspi@58003000 {
- compatible = "st,stm32f469-qspi";
- reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
- reg-names = "qspi", "qspi_mm";
- clocks = <&rcc QSPI_K>;
- resets = <&rcc QSPI_R>;
- status = "disabled";
- };
-
- sdmmc1: sdmmc@58005000 {
- compatible = "arm,pl18x", "arm,primecell";
- arm,primecell-periphid = <0x00253180>;
- reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
- clocks = <&rcc SDMMC1_K>;
- clock-names = "apb_pclk";
- resets = <&rcc SDMMC1_R>;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- max-frequency = <120000000>;
- status = "disabled";
- };
-
- sdmmc2: sdmmc@58007000 {
- compatible = "arm,pl18x", "arm,primecell";
- arm,primecell-periphid = <0x00253180>;
- reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
- clocks = <&rcc SDMMC2_K>;
- clock-names = "apb_pclk";
- resets = <&rcc SDMMC2_R>;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- max-frequency = <120000000>;
- status = "disabled";
- };
-
- iwdg2: watchdog@5a002000 {
- compatible = "st,stm32mp1-iwdg";
- reg = <0x5a002000 0x400>;
- clocks = <&rcc IWDG2>, <&rcc CK_LSI>;
- clock-names = "pclk", "lsi";
- status = "disabled";
- };
-
- usart1: serial@5c000000 {
- compatible = "st,stm32h7-uart";
- reg = <0x5c000000 0x400>;
- interrupt-names = "event", "wakeup";
- interrupts-extended = <&intc GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
- <&exti 26 1>;
- clocks = <&rcc USART1_K>;
- resets = <&rcc USART1_R>;
- status = "disabled";
- };
-
- spi6: spi@5c001000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32h7-spi";
- reg = <0x5c001000 0x400>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc SPI6_K>;
- resets = <&rcc SPI6_R>;
- status = "disabled";
- };
-
- i2c4: i2c@5c002000 {
- compatible = "st,stm32f7-i2c";
- reg = <0x5c002000 0x400>;
- interrupt-names = "event", "error", "wakeup";
- interrupts-extended = <&intc GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
- <&intc GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
- <&exti 24 1>;
- clocks = <&rcc I2C4_K>;
- resets = <&rcc I2C4_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- rtc: rtc@5c004000 {
- compatible = "st,stm32mp1-rtc";
- reg = <0x5c004000 0x400>;
- clocks = <&rcc RTCAPB>, <&rcc RTC>;
- clock-names = "pclk", "rtc_ck";
- interrupts-extended = <&intc GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
- <&exti 19 1>;
- status = "disabled";
- };
-
- bsec: nvmem@5c005000 {
- compatible = "st,stm32mp15-bsec";
- reg = <0x5c005000 0x400>;
- #address-cells = <1>;
- #size-cells = <1>;
- ts_cal1: calib@5c {
- reg = <0x5c 0x2>;
- };
- ts_cal2: calib@5e {
- reg = <0x5e 0x2>;
- };
- };
-
- etzpc: etzpc@5c007000 {
- compatible = "st,stm32-etzpc";
- reg = <0x5C007000 0x400>;
- clocks = <&rcc TZPC>;
- status = "disabled";
- secure-status = "okay";
- };
-
- i2c6: i2c@5c009000 {
- compatible = "st,stm32f7-i2c";
- reg = <0x5c009000 0x400>;
- interrupt-names = "event", "error", "wakeup";
- interrupts-extended = <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
- <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
- <&exti 54 1>;
- clocks = <&rcc I2C6_K>;
- resets = <&rcc I2C6_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
- };
-};
diff --git a/fdts/stm32mp157caa-pinctrl.dtsi b/fdts/stm32mp157caa-pinctrl.dtsi
deleted file mode 100644
index 9b9cd08..0000000
--- a/fdts/stm32mp157caa-pinctrl.dtsi
+++ /dev/null
@@ -1,90 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
- * Author: Alexandre Torgue <alexandre.torgue@st.com>
- */
-
-#include "stm32mp157-pinctrl.dtsi"
-/ {
- soc {
- pinctrl: pin-controller@50002000 {
- st,package = <STM32MP157CAA>;
-
- gpioa: gpio@50002000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 0 16>;
- };
-
- gpiob: gpio@50003000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 16 16>;
- };
-
- gpioc: gpio@50004000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 32 16>;
- };
-
- gpiod: gpio@50005000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 48 16>;
- };
-
- gpioe: gpio@50006000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 64 16>;
- };
-
- gpiof: gpio@50007000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 80 16>;
- };
-
- gpiog: gpio@50008000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 96 16>;
- };
-
- gpioh: gpio@50009000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 112 16>;
- };
-
- gpioi: gpio@5000a000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 128 16>;
- };
-
- gpioj: gpio@5000b000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 144 16>;
- };
-
- gpiok: gpio@5000c000 {
- status = "okay";
- ngpios = <8>;
- gpio-ranges = <&pinctrl 0 160 8>;
- };
- };
-
- pinctrl_z: pin-controller-z@54004000 {
- st,package = <STM32MP157CAA>;
-
- gpioz: gpio@54004000 {
- status = "okay";
- ngpios = <8>;
- gpio-ranges = <&pinctrl_z 0 400 8>;
- };
- };
- };
-};
diff --git a/fdts/stm32mp157cac-pinctrl.dtsi b/fdts/stm32mp157cac-pinctrl.dtsi
deleted file mode 100644
index 777f991..0000000
--- a/fdts/stm32mp157cac-pinctrl.dtsi
+++ /dev/null
@@ -1,78 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
- * Author: Alexandre Torgue <alexandre.torgue@st.com>
- */
-
-#include "stm32mp157-pinctrl.dtsi"
-/ {
- soc {
- pinctrl: pin-controller@50002000 {
- st,package = <STM32MP157CAC>;
-
- gpioa: gpio@50002000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 0 16>;
- };
-
- gpiob: gpio@50003000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 16 16>;
- };
-
- gpioc: gpio@50004000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 32 16>;
- };
-
- gpiod: gpio@50005000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 48 16>;
- };
-
- gpioe: gpio@50006000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 64 16>;
- };
-
- gpiof: gpio@50007000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 80 16>;
- };
-
- gpiog: gpio@50008000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 96 16>;
- };
-
- gpioh: gpio@50009000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 112 16>;
- };
-
- gpioi: gpio@5000a000 {
- status = "okay";
- ngpios = <12>;
- gpio-ranges = <&pinctrl 0 128 12>;
- };
- };
-
- pinctrl_z: pin-controller-z@54004000 {
- st,package = <STM32MP157CAC>;
-
- gpioz: gpio@54004000 {
- status = "okay";
- ngpios = <8>;
- gpio-ranges = <&pinctrl_z 0 400 8>;
- };
- };
- };
-};
diff --git a/fdts/stm32mp15xc.dtsi b/fdts/stm32mp15xc.dtsi
new file mode 100644
index 0000000..b06a55a
--- /dev/null
+++ b/fdts/stm32mp15xc.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+/ {
+ soc {
+ cryp1: cryp@54001000 {
+ compatible = "st,stm32mp1-cryp";
+ reg = <0x54001000 0x400>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CRYP1>;
+ resets = <&rcc CRYP1_R>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/fdts/stm32mp15xx-dkx.dtsi b/fdts/stm32mp15xx-dkx.dtsi
new file mode 100644
index 0000000..52b914b
--- /dev/null
+++ b/fdts/stm32mp15xx-dkx.dtsi
@@ -0,0 +1,350 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#include <dt-bindings/clock/stm32mp1-clksrc.h>
+#include "stm32mp15-ddr3-1x4Gb-1066-binG.dtsi"
+
+/ {
+ memory@c0000000 {
+ device_type = "memory";
+ reg = <0xc0000000 0x20000000>;
+ };
+
+ vin: vin {
+ compatible = "regulator-fixed";
+ regulator-name = "vin";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+};
+
+&bsec {
+ board_id: board_id@ec {
+ reg = <0xec 0x4>;
+ st,non-secure-otp;
+ };
+};
+
+&clk_hse {
+ st,digbypass;
+};
+
+&cpu0{
+ cpu-supply = <&vddcore>;
+};
+
+&cpu1{
+ cpu-supply = <&vddcore>;
+};
+
+&hash1 {
+ status = "okay";
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins_a>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ pmic: stpmic@33 {
+ compatible = "st,stpmic1";
+ reg = <0x33>;
+ interrupts-extended = <&exti_pwr 55 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "okay";
+
+ regulators {
+ compatible = "st,stpmic1-regulators";
+ buck1-supply = <&vin>;
+ buck2-supply = <&vin>;
+ buck3-supply = <&vin>;
+ buck4-supply = <&vin>;
+ ldo1-supply = <&v3v3>;
+ ldo2-supply = <&vin>;
+ ldo3-supply = <&vdd_ddr>;
+ ldo4-supply = <&vin>;
+ ldo5-supply = <&vin>;
+ ldo6-supply = <&v3v3>;
+ vref_ddr-supply = <&vin>;
+ boost-supply = <&vin>;
+ pwr_sw1-supply = <&bst_out>;
+ pwr_sw2-supply = <&bst_out>;
+
+ vddcore: buck1 {
+ regulator-name = "vddcore";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd_ddr: buck2 {
+ regulator-name = "vdd_ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd: buck3 {
+ regulator-name = "vdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ st,mask-reset;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ v3v3: buck4 {
+ regulator-name = "v3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ regulator-initial-mode = <0>;
+ };
+
+ v1v8_audio: ldo1 {
+ regulator-name = "v1v8_audio";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ v3v3_hdmi: ldo2 {
+ regulator-name = "v3v3_hdmi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vtt_ddr: ldo3 {
+ regulator-name = "vtt_ddr";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <750000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ };
+
+ vdd_usb: ldo4 {
+ regulator-name = "vdd_usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdda: ldo5 {
+ regulator-name = "vdda";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-boot-on;
+ };
+
+ v1v2_hdmi: ldo6 {
+ regulator-name = "v1v2_hdmi";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ vref_ddr: vref_ddr {
+ regulator-name = "vref_ddr";
+ regulator-always-on;
+ regulator-over-current-protection;
+ };
+
+ bst_out: boost {
+ regulator-name = "bst_out";
+ };
+
+ vbus_otg: pwr_sw1 {
+ regulator-name = "vbus_otg";
+ };
+
+ vbus_sw: pwr_sw2 {
+ regulator-name = "vbus_sw";
+ regulator-active-discharge = <1>;
+ };
+ };
+ };
+};
+
+&iwdg2 {
+ timeout-sec = <32>;
+ status = "okay";
+ secure-status = "okay";
+};
+
+&pwr_regulators {
+ vdd-supply = <&vdd>;
+ vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&rcc {
+ secure-status = "disabled";
+ st,clksrc = <
+ CLK_MPU_PLL1P
+ CLK_AXI_PLL2P
+ CLK_MCU_PLL3P
+ CLK_PLL12_HSE
+ CLK_PLL3_HSE
+ CLK_PLL4_HSE
+ CLK_RTC_LSE
+ CLK_MCO1_DISABLED
+ CLK_MCO2_DISABLED
+ >;
+
+ st,clkdiv = <
+ 1 /*MPU*/
+ 0 /*AXI*/
+ 0 /*MCU*/
+ 1 /*APB1*/
+ 1 /*APB2*/
+ 1 /*APB3*/
+ 1 /*APB4*/
+ 2 /*APB5*/
+ 23 /*RTC*/
+ 0 /*MCO1*/
+ 0 /*MCO2*/
+ >;
+
+ st,pkcs = <
+ CLK_CKPER_HSE
+ CLK_FMC_ACLK
+ CLK_QSPI_ACLK
+ CLK_ETH_DISABLED
+ CLK_SDMMC12_PLL4P
+ CLK_DSI_DSIPLL
+ CLK_STGEN_HSE
+ CLK_USBPHY_HSE
+ CLK_SPI2S1_PLL3Q
+ CLK_SPI2S23_PLL3Q
+ CLK_SPI45_HSI
+ CLK_SPI6_HSI
+ CLK_I2C46_HSI
+ CLK_SDMMC3_PLL4P
+ CLK_USBO_USBPHY
+ CLK_ADC_CKPER
+ CLK_CEC_LSE
+ CLK_I2C12_HSI
+ CLK_I2C35_HSI
+ CLK_UART1_HSI
+ CLK_UART24_HSI
+ CLK_UART35_HSI
+ CLK_UART6_HSI
+ CLK_UART78_HSI
+ CLK_SPDIF_PLL4P
+ CLK_FDCAN_PLL4R
+ CLK_SAI1_PLL3Q
+ CLK_SAI2_PLL3Q
+ CLK_SAI3_PLL3Q
+ CLK_SAI4_PLL3Q
+ CLK_RNG1_LSI
+ CLK_RNG2_LSI
+ CLK_LPTIM1_PCLK1
+ CLK_LPTIM23_PCLK3
+ CLK_LPTIM45_LSE
+ >;
+
+ /* VCO = 1300.0 MHz => P = 650 (CPU) */
+ pll1: st,pll@0 {
+ compatible = "st,stm32mp1-pll";
+ reg = <0>;
+ cfg = < 2 80 0 0 0 PQR(1,0,0) >;
+ frac = < 0x800 >;
+ };
+
+ /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
+ pll2: st,pll@1 {
+ compatible = "st,stm32mp1-pll";
+ reg = <1>;
+ cfg = <2 65 1 0 0 PQR(1,1,1)>;
+ frac = <0x1400>;
+ };
+
+ /* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
+ pll3: st,pll@2 {
+ compatible = "st,stm32mp1-pll";
+ reg = <2>;
+ cfg = <1 33 1 16 36 PQR(1,1,1)>;
+ frac = <0x1a04>;
+ };
+
+ /* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */
+ pll4: st,pll@3 {
+ compatible = "st,stm32mp1-pll";
+ reg = <3>;
+ cfg = <3 98 5 7 7 PQR(1,1,1)>;
+ };
+};
+
+&rng1 {
+ status = "okay";
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sdmmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc1_b4_pins_a>;
+ disable-wp;
+ st,neg-edge;
+ bus-width = <4>;
+ vmmc-supply = <&v3v3>;
+ status = "okay";
+};
+
+&timers15 {
+ secure-status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins_a>;
+ status = "okay";
+};
+
+&uart7 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart7_pins_b>;
+ status = "disabled";
+};
+
+&usart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usart3_pins_b>;
+ uart-has-rtscts;
+ status = "disabled";
+};
+
+&usbotg_hs {
+ phys = <&usbphyc_port1 0>;
+ phy-names = "usb2-phy";
+ usb-role-switch;
+ status = "okay";
+};
+
+&usbphyc {
+ status = "okay";
+};
+
+&usbphyc_port0 {
+ phy-supply = <&vdd_usb>;
+};
+
+&usbphyc_port1 {
+ phy-supply = <&vdd_usb>;
+};
diff --git a/fdts/stm32mp15xxaa-pinctrl.dtsi b/fdts/stm32mp15xxaa-pinctrl.dtsi
new file mode 100644
index 0000000..64e566b
--- /dev/null
+++ b/fdts/stm32mp15xxaa-pinctrl.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com>
+ */
+
+&pinctrl {
+ st,package = <STM32MP_PKG_AA>;
+
+ gpioa: gpio@50002000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpiob: gpio@50003000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ gpioc: gpio@50004000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ gpiod: gpio@50005000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ gpioe: gpio@50006000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ gpiof: gpio@50007000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 80 16>;
+ };
+
+ gpiog: gpio@50008000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 96 16>;
+ };
+
+ gpioh: gpio@50009000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 112 16>;
+ };
+
+ gpioi: gpio@5000a000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 128 16>;
+ };
+
+ gpioj: gpio@5000b000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 144 16>;
+ };
+
+ gpiok: gpio@5000c000 {
+ status = "okay";
+ ngpios = <8>;
+ gpio-ranges = <&pinctrl 0 160 8>;
+ };
+};
+
+&pinctrl_z {
+ st,package = <STM32MP_PKG_AA>;
+
+ gpioz: gpio@54004000 {
+ status = "okay";
+ ngpios = <8>;
+ gpio-ranges = <&pinctrl_z 0 400 8>;
+ };
+};
diff --git a/fdts/stm32mp15xxab-pinctrl.dtsi b/fdts/stm32mp15xxab-pinctrl.dtsi
new file mode 100644
index 0000000..d29af89
--- /dev/null
+++ b/fdts/stm32mp15xxab-pinctrl.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com>
+ */
+
+&pinctrl {
+ st,package = <STM32MP_PKG_AB>;
+
+ gpioa: gpio@50002000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpiob: gpio@50003000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ gpioc: gpio@50004000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ gpiod: gpio@50005000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ gpioe: gpio@50006000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ gpiof: gpio@50007000 {
+ status = "okay";
+ ngpios = <6>;
+ gpio-ranges = <&pinctrl 6 86 6>;
+ };
+
+ gpiog: gpio@50008000 {
+ status = "okay";
+ ngpios = <10>;
+ gpio-ranges = <&pinctrl 6 102 10>;
+ };
+
+ gpioh: gpio@50009000 {
+ status = "okay";
+ ngpios = <2>;
+ gpio-ranges = <&pinctrl 0 112 2>;
+ };
+};
diff --git a/fdts/stm32mp15xxac-pinctrl.dtsi b/fdts/stm32mp15xxac-pinctrl.dtsi
new file mode 100644
index 0000000..5d8199f
--- /dev/null
+++ b/fdts/stm32mp15xxac-pinctrl.dtsi
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com>
+ */
+
+&pinctrl {
+ st,package = <STM32MP_PKG_AC>;
+
+ gpioa: gpio@50002000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpiob: gpio@50003000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ gpioc: gpio@50004000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ gpiod: gpio@50005000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ gpioe: gpio@50006000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ gpiof: gpio@50007000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 80 16>;
+ };
+
+ gpiog: gpio@50008000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 96 16>;
+ };
+
+ gpioh: gpio@50009000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 112 16>;
+ };
+
+ gpioi: gpio@5000a000 {
+ status = "okay";
+ ngpios = <12>;
+ gpio-ranges = <&pinctrl 0 128 12>;
+ };
+};
+
+&pinctrl_z {
+ st,package = <STM32MP_PKG_AC>;
+
+ gpioz: gpio@54004000 {
+ status = "okay";
+ ngpios = <8>;
+ gpio-ranges = <&pinctrl_z 0 400 8>;
+ };
+};
diff --git a/fdts/stm32mp15xxad-pinctrl.dtsi b/fdts/stm32mp15xxad-pinctrl.dtsi
new file mode 100644
index 0000000..023f540
--- /dev/null
+++ b/fdts/stm32mp15xxad-pinctrl.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com>
+ */
+
+&pinctrl {
+ st,package = <STM32MP_PKG_AD>;
+
+ gpioa: gpio@50002000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpiob: gpio@50003000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ gpioc: gpio@50004000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ gpiod: gpio@50005000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ gpioe: gpio@50006000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ gpiof: gpio@50007000 {
+ status = "okay";
+ ngpios = <6>;
+ gpio-ranges = <&pinctrl 6 86 6>;
+ };
+
+ gpiog: gpio@50008000 {
+ status = "okay";
+ ngpios = <10>;
+ gpio-ranges = <&pinctrl 6 102 10>;
+ };
+
+ gpioh: gpio@50009000 {
+ status = "okay";
+ ngpios = <2>;
+ gpio-ranges = <&pinctrl 0 112 2>;
+ };
+};
diff --git a/include/dt-bindings/pinctrl/stm32-pinfunc.h b/include/dt-bindings/pinctrl/stm32-pinfunc.h
index 7f6e4b9..1bc2c40 100644
--- a/include/dt-bindings/pinctrl/stm32-pinfunc.h
+++ b/include/dt-bindings/pinctrl/stm32-pinfunc.h
@@ -26,6 +26,7 @@
#define AF14 0xf
#define AF15 0x10
#define ANALOG 0x11
+#define RSVD 0x12
/* define Pins number*/
#define PIN_NO(port, line) (((port) - 'A') * 0x10 + (line))
@@ -33,9 +34,9 @@
#define STM32_PINMUX(port, line, mode) (((PIN_NO(port, line)) << 8) | (mode))
/* package information */
-#define STM32MP157CAA 0x1
-#define STM32MP157CAB 0x2
-#define STM32MP157CAC 0x4
-#define STM32MP157CAD 0x8
+#define STM32MP_PKG_AA 0x1
+#define STM32MP_PKG_AB 0x2
+#define STM32MP_PKG_AC 0x4
+#define STM32MP_PKG_AD 0x8
#endif /* _DT_BINDINGS_STM32_PINFUNC_H */
diff --git a/plat/st/stm32mp1/stm32mp1_def.h b/plat/st/stm32mp1/stm32mp1_def.h
index ea18a30..369ba69 100644
--- a/plat/st/stm32mp1/stm32mp1_def.h
+++ b/plat/st/stm32mp1/stm32mp1_def.h
@@ -513,7 +513,7 @@
******************************************************************************/
#define DT_BSEC_COMPAT "st,stm32mp15-bsec"
#define DT_IWDG_COMPAT "st,stm32mp1-iwdg"
-#define DT_PWR_COMPAT "st,stm32mp1-pwr"
+#define DT_PWR_COMPAT "st,stm32mp1,pwr-reg"
#define DT_RCC_CLK_COMPAT "st,stm32mp1-rcc"
#define DT_SYSCFG_COMPAT "st,stm32mp157-syscfg"