Merge changes I6b4a4d22,I06bde289,I86e39481,I7ea9b75c into integration
* changes:
feat(stm32mp1-fdts): use /omit-if-no-ref/ for pins nodes
feat(st): mandate dtc version 1.4.7
refactor(st): move mbedtls config files
refactor(st): add common mk files
diff --git a/fdts/stm32mp13-bl2.dtsi b/fdts/stm32mp13-bl2.dtsi
index 836e9ae..06db796 100644
--- a/fdts/stm32mp13-bl2.dtsi
+++ b/fdts/stm32mp13-bl2.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
- * Copyright (C) STMicroelectronics 2022 - All Rights Reserved
+ * Copyright (c) 2022-2023, STMicroelectronics - All Rights Reserved
*/
/ {
@@ -32,13 +32,6 @@
#if !STM32MP_USB_PROGRAMMER
/delete-node/ usbphyc@5a006000;
#endif
-
- pinctrl@50002000 {
-#if !STM32MP_EMMC && !STM32MP_SDMMC
- /delete-node/ sdmmc1-b4-0;
- /delete-node/ sdmmc2-b4-0;
-#endif
- };
};
/*
diff --git a/fdts/stm32mp13-pinctrl.dtsi b/fdts/stm32mp13-pinctrl.dtsi
index 879da9c..0129372 100644
--- a/fdts/stm32mp13-pinctrl.dtsi
+++ b/fdts/stm32mp13-pinctrl.dtsi
@@ -1,12 +1,12 @@
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
- * Copyright (C) STMicroelectronics 2022 - All Rights Reserved
+ * Copyright (c) 2022-2023, STMicroelectronics - All Rights Reserved
* Author: Alexandre Torgue <alexandre.torgue@foss.st.com>
*/
#include <dt-bindings/pinctrl/stm32-pinfunc.h>
&pinctrl {
- i2c4_pins_a: i2c4-0 {
+ /omit-if-no-ref/ i2c4_pins_a: i2c4-0 {
pins {
pinmux = <STM32_PINMUX('E', 15, AF6)>, /* I2C4_SCL */
<STM32_PINMUX('B', 9, AF6)>; /* I2C4_SDA */
@@ -16,7 +16,7 @@
};
};
- sdmmc1_b4_pins_a: sdmmc1-b4-0 {
+ /omit-if-no-ref/ sdmmc1_b4_pins_a: sdmmc1-b4-0 {
pins {
pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
<STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
@@ -29,7 +29,7 @@
};
};
- sdmmc1_clk_pins_a: sdmmc1-clk-0 {
+ /omit-if-no-ref/ sdmmc1_clk_pins_a: sdmmc1-clk-0 {
pins {
pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
slew-rate = <1>;
@@ -38,7 +38,7 @@
};
};
- sdmmc2_b4_pins_a: sdmmc2-b4-0 {
+ /omit-if-no-ref/ sdmmc2_b4_pins_a: sdmmc2-b4-0 {
pins {
pinmux = <STM32_PINMUX('B', 14, AF10)>, /* SDMMC2_D0 */
<STM32_PINMUX('B', 15, AF10)>, /* SDMMC2_D1 */
@@ -51,7 +51,7 @@
};
};
- sdmmc2_clk_pins_a: sdmmc2-clk-0 {
+ /omit-if-no-ref/ sdmmc2_clk_pins_a: sdmmc2-clk-0 {
pins {
pinmux = <STM32_PINMUX('E', 3, AF10)>; /* SDMMC2_CK */
slew-rate = <1>;
@@ -60,7 +60,7 @@
};
};
- uart4_pins_a: uart4-0 {
+ /omit-if-no-ref/ uart4_pins_a: uart4-0 {
pins1 {
pinmux = <STM32_PINMUX('D', 6, AF8)>; /* UART4_TX */
bias-disable;
@@ -73,7 +73,7 @@
};
};
- usart1_pins_a: usart1-0 {
+ /omit-if-no-ref/ usart1_pins_a: usart1-0 {
pins1 {
pinmux = <STM32_PINMUX('C', 0, AF7)>, /* USART1_TX */
<STM32_PINMUX('C', 2, AF7)>; /* USART1_RTS */
@@ -88,7 +88,7 @@
};
};
- uart8_pins_a: uart8-0 {
+ /omit-if-no-ref/ uart8_pins_a: uart8-0 {
pins1 {
pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */
bias-disable;
diff --git a/fdts/stm32mp15-bl2.dtsi b/fdts/stm32mp15-bl2.dtsi
index 5489a62..f956b05 100644
--- a/fdts/stm32mp15-bl2.dtsi
+++ b/fdts/stm32mp15-bl2.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
- * Copyright (C) STMicroelectronics 2020-2022 - All Rights Reserved
+ * Copyright (c) 2020-2023, STMicroelectronics - All Rights Reserved
*/
/ {
@@ -45,28 +45,6 @@
/delete-node/ stgen@5c008000;
/delete-node/ i2c@5c009000;
/delete-node/ tamp@5c00a000;
-
- pinctrl@50002000 {
-#if !STM32MP_RAW_NAND
- /delete-node/ fmc-0;
-#endif
-#if !STM32MP_SPI_NAND && !STM32MP_SPI_NOR
- /delete-node/ qspi-clk-0;
- /delete-node/ qspi-bk1-0;
- /delete-node/ qspi-bk2-0;
-#endif
-#if !STM32MP_EMMC && !STM32MP_SDMMC
- /delete-node/ sdmmc1-b4-0;
- /delete-node/ sdmmc1-dir-0;
- /delete-node/ sdmmc2-b4-0;
- /delete-node/ sdmmc2-b4-1;
- /delete-node/ sdmmc2-d47-0;
-#endif
-#if !STM32MP_USB_PROGRAMMER
- /delete-node/ usbotg_hs-0;
- /delete-node/ usbotg-fs-dp-dm-0;
-#endif
- };
};
/*
diff --git a/fdts/stm32mp15-bl32.dtsi b/fdts/stm32mp15-bl32.dtsi
index 31b24f6..c5a815e 100644
--- a/fdts/stm32mp15-bl32.dtsi
+++ b/fdts/stm32mp15-bl32.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
- * Copyright (C) STMicroelectronics 2020-2021 - All Rights Reserved
+ * Copyright (c) 2020-2023, STMicroelectronics - All Rights Reserved
*/
/ {
@@ -26,21 +26,5 @@
/delete-node/ spi@5c001000;
/delete-node/ stgen@5c008000;
/delete-node/ i2c@5c009000;
-
- pinctrl@50002000 {
- /delete-node/ fmc-0;
- /delete-node/ qspi-clk-0;
- /delete-node/ qspi-bk1-0;
- /delete-node/ qspi-bk2-0;
- /delete-node/ sdmmc1-b4-0;
- /delete-node/ sdmmc1-dir-0;
- /delete-node/ sdmmc2-b4-0;
- /delete-node/ sdmmc2-b4-1;
- /delete-node/ sdmmc2-d47-0;
- /delete-node/ sdmmc2-d47-1;
- /delete-node/ sdmmc2-d47-3;
- /delete-node/ usbotg_hs-0;
- /delete-node/ usbotg-fs-dp-dm-0;
- };
};
};
diff --git a/fdts/stm32mp15-pinctrl.dtsi b/fdts/stm32mp15-pinctrl.dtsi
index 7d2be0b..8dc00fe 100644
--- a/fdts/stm32mp15-pinctrl.dtsi
+++ b/fdts/stm32mp15-pinctrl.dtsi
@@ -1,12 +1,12 @@
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
- * Copyright (c) 2017-2021, STMicroelectronics - All Rights Reserved
+ * Copyright (c) 2017-2023, STMicroelectronics - All Rights Reserved
* Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
*/
#include <dt-bindings/pinctrl/stm32-pinfunc.h>
&pinctrl {
- fmc_pins_a: fmc-0 {
+ /omit-if-no-ref/ fmc_pins_a: fmc-0 {
pins1 {
pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
<STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */
@@ -31,7 +31,7 @@
};
};
- i2c2_pins_a: i2c2-0 {
+ /omit-if-no-ref/ i2c2_pins_a: i2c2-0 {
pins {
pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */
<STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
@@ -41,7 +41,7 @@
};
};
- qspi_clk_pins_a: qspi-clk-0 {
+ /omit-if-no-ref/ qspi_clk_pins_a: qspi-clk-0 {
pins {
pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */
bias-disable;
@@ -50,7 +50,7 @@
};
};
- qspi_bk1_pins_a: qspi-bk1-0 {
+ /omit-if-no-ref/ qspi_bk1_pins_a: qspi-bk1-0 {
pins1 {
pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
<STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
@@ -68,7 +68,7 @@
};
};
- qspi_bk2_pins_a: qspi-bk2-0 {
+ /omit-if-no-ref/ qspi_bk2_pins_a: qspi-bk2-0 {
pins1 {
pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */
<STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */
@@ -86,7 +86,7 @@
};
};
- sdmmc1_b4_pins_a: sdmmc1-b4-0 {
+ /omit-if-no-ref/ sdmmc1_b4_pins_a: sdmmc1-b4-0 {
pins1 {
pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
<STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
@@ -105,7 +105,7 @@
};
};
- sdmmc1_dir_pins_a: sdmmc1-dir-0 {
+ /omit-if-no-ref/ sdmmc1_dir_pins_a: sdmmc1-dir-0 {
pins1 {
pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
<STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
@@ -120,7 +120,7 @@
};
};
- sdmmc1_dir_pins_b: sdmmc1-dir-1 {
+ /omit-if-no-ref/ sdmmc1_dir_pins_b: sdmmc1-dir-1 {
pins1 {
pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
<STM32_PINMUX('E', 14, AF11)>, /* SDMMC1_D123DIR */
@@ -135,7 +135,7 @@
};
};
- sdmmc2_b4_pins_a: sdmmc2-b4-0 {
+ /omit-if-no-ref/ sdmmc2_b4_pins_a: sdmmc2-b4-0 {
pins1 {
pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
<STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
@@ -154,7 +154,7 @@
};
};
- sdmmc2_b4_pins_b: sdmmc2-b4-1 {
+ /omit-if-no-ref/ sdmmc2_b4_pins_b: sdmmc2-b4-1 {
pins1 {
pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
<STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
@@ -173,7 +173,7 @@
};
};
- sdmmc2_d47_pins_a: sdmmc2-d47-0 {
+ /omit-if-no-ref/ sdmmc2_d47_pins_a: sdmmc2-d47-0 {
pins {
pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
<STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
@@ -185,7 +185,7 @@
};
};
- sdmmc2_d47_pins_b: sdmmc2-d47-1 {
+ /omit-if-no-ref/ sdmmc2_d47_pins_b: sdmmc2-d47-1 {
pins {
pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
<STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
@@ -197,7 +197,7 @@
};
};
- sdmmc2_d47_pins_c: sdmmc2-d47-2 {
+ /omit-if-no-ref/ sdmmc2_d47_pins_c: sdmmc2-d47-2 {
pins {
pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
<STM32_PINMUX('A', 15, AF9)>, /* SDMMC2_D5 */
@@ -209,7 +209,7 @@
};
};
- sdmmc2_d47_pins_d: sdmmc2-d47-3 {
+ /omit-if-no-ref/ sdmmc2_d47_pins_d: sdmmc2-d47-3 {
pins {
pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
<STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
@@ -218,7 +218,7 @@
};
};
- uart4_pins_a: uart4-0 {
+ /omit-if-no-ref/ uart4_pins_a: uart4-0 {
pins1 {
pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
bias-disable;
@@ -231,7 +231,7 @@
};
};
- uart4_pins_b: uart4-1 {
+ /omit-if-no-ref/ uart4_pins_b: uart4-1 {
pins1 {
pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */
bias-disable;
@@ -244,7 +244,7 @@
};
};
- uart7_pins_a: uart7-0 {
+ /omit-if-no-ref/ uart7_pins_a: uart7-0 {
pins1 {
pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART7_TX */
bias-disable;
@@ -259,7 +259,7 @@
};
};
- uart7_pins_b: uart7-1 {
+ /omit-if-no-ref/ uart7_pins_b: uart7-1 {
pins1 {
pinmux = <STM32_PINMUX('F', 7, AF7)>; /* UART7_TX */
bias-disable;
@@ -272,7 +272,7 @@
};
};
- uart7_pins_c: uart7-2 {
+ /omit-if-no-ref/ uart7_pins_c: uart7-2 {
pins1 {
pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART7_TX */
bias-disable;
@@ -285,7 +285,7 @@
};
};
- uart8_pins_a: uart8-0 {
+ /omit-if-no-ref/ uart8_pins_a: uart8-0 {
pins1 {
pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */
bias-disable;
@@ -298,7 +298,7 @@
};
};
- usart2_pins_a: usart2-0 {
+ /omit-if-no-ref/ usart2_pins_a: usart2-0 {
pins1 {
pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */
<STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
@@ -313,7 +313,7 @@
};
};
- usart2_pins_b: usart2-1 {
+ /omit-if-no-ref/ usart2_pins_b: usart2-1 {
pins1 {
pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */
<STM32_PINMUX('A', 1, AF7)>; /* USART2_RTS */
@@ -328,7 +328,7 @@
};
};
- usart2_pins_c: usart2-2 {
+ /omit-if-no-ref/ usart2_pins_c: usart2-2 {
pins1 {
pinmux = <STM32_PINMUX('D', 5, AF7)>, /* USART2_TX */
<STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
@@ -343,7 +343,7 @@
};
};
- usart3_pins_a: usart3-0 {
+ /omit-if-no-ref/ usart3_pins_a: usart3-0 {
pins1 {
pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */
bias-disable;
@@ -356,7 +356,7 @@
};
};
- usart3_pins_b: usart3-1 {
+ /omit-if-no-ref/ usart3_pins_b: usart3-1 {
pins1 {
pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
<STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
@@ -371,7 +371,7 @@
};
};
- usart3_pins_c: usart3-2 {
+ /omit-if-no-ref/ usart3_pins_c: usart3-2 {
pins1 {
pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
<STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
@@ -386,13 +386,13 @@
};
};
- usbotg_hs_pins_a: usbotg-hs-0 {
+ /omit-if-no-ref/ usbotg_hs_pins_a: usbotg-hs-0 {
pins {
pinmux = <STM32_PINMUX('A', 10, ANALOG)>; /* OTG_ID */
};
};
- usbotg_fs_dp_dm_pins_a: usbotg-fs-dp-dm-0 {
+ /omit-if-no-ref/ usbotg_fs_dp_dm_pins_a: usbotg-fs-dp-dm-0 {
pins {
pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* OTG_FS_DM */
<STM32_PINMUX('A', 12, ANALOG)>; /* OTG_FS_DP */
@@ -401,7 +401,7 @@
};
&pinctrl_z {
- i2c4_pins_a: i2c4-0 {
+ /omit-if-no-ref/ i2c4_pins_a: i2c4-0 {
pins {
pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */
<STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */
diff --git a/plat/st/common/common.mk b/plat/st/common/common.mk
new file mode 100644
index 0000000..f69c901
--- /dev/null
+++ b/plat/st/common/common.mk
@@ -0,0 +1,257 @@
+#
+# Copyright (c) 2023, STMicroelectronics - All Rights Reserved
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+RESET_TO_BL2 := 1
+
+STM32MP_EARLY_CONSOLE ?= 0
+STM32MP_RECONFIGURE_CONSOLE ?= 0
+STM32MP_UART_BAUDRATE ?= 115200
+
+TRUSTED_BOARD_BOOT ?= 0
+STM32MP_USE_EXTERNAL_HEAP ?= 0
+
+# Use secure library from the ROM code for authentication
+STM32MP_CRYPTO_ROM_LIB ?= 0
+
+# Please don't increment this value without good understanding of
+# the monotonic counter
+STM32_TF_VERSION ?= 0
+
+# Enable dynamic memory mapping
+PLAT_XLAT_TABLES_DYNAMIC := 1
+
+# STM32 image header binary type for BL2
+STM32_HEADER_BL2_BINARY_TYPE := 0x10
+
+TF_CFLAGS += -Wsign-compare
+TF_CFLAGS += -Wformat-signedness
+
+# Boot devices
+STM32MP_EMMC ?= 0
+STM32MP_SDMMC ?= 0
+STM32MP_RAW_NAND ?= 0
+STM32MP_SPI_NAND ?= 0
+STM32MP_SPI_NOR ?= 0
+
+# Put both BL2 and FIP in eMMC boot partition
+STM32MP_EMMC_BOOT ?= 0
+
+# Serial boot devices
+STM32MP_UART_PROGRAMMER ?= 0
+STM32MP_USB_PROGRAMMER ?= 0
+
+$(eval DTC_V = $(shell $(DTC) -v | awk '{print $$NF}'))
+$(eval DTC_VERSION = $(shell printf "%d" $(shell echo ${DTC_V} | cut -d- -f1 | sed "s/\./0/g" | grep -o "[0-9]*")))
+DTC_CPPFLAGS += ${INCLUDES}
+DTC_FLAGS += -Wno-unit_address_vs_reg
+ifeq ($(shell test $(DTC_VERSION) -ge 10601; echo $$?),0)
+DTC_FLAGS += -Wno-interrupt_provider
+endif
+
+# Macros and rules to build TF binary
+STM32_TF_ELF_LDFLAGS := --hash-style=gnu --as-needed
+STM32_TF_LINKERFILE := ${BUILD_PLAT}/${PLAT}.ld
+
+ASFLAGS += -DBL2_BIN_PATH=\"${BUILD_PLAT}/bl2.bin\"
+
+# Variables for use with stm32image
+STM32IMAGEPATH ?= tools/stm32image
+STM32IMAGE ?= ${STM32IMAGEPATH}/stm32image${BIN_EXT}
+STM32IMAGE_SRC := ${STM32IMAGEPATH}/stm32image.c
+STM32_DEPS += ${STM32IMAGE}
+
+FIP_DEPS += dtbs
+STM32MP_HW_CONFIG := ${BL33_CFG}
+
+# Add the HW_CONFIG to FIP and specify the same to certtool
+$(eval $(call TOOL_ADD_PAYLOAD,${STM32MP_HW_CONFIG},--hw-config))
+
+# Add the build options to pack Trusted OS Extra1 and Trusted OS Extra2 images
+# in the FIP if the platform requires.
+ifneq ($(BL32_EXTRA1),)
+$(eval $(call TOOL_ADD_IMG,BL32_EXTRA1,--tos-fw-extra1,,$(ENCRYPT_BL32)))
+endif
+ifneq ($(BL32_EXTRA2),)
+$(eval $(call TOOL_ADD_IMG,BL32_EXTRA2,--tos-fw-extra2,,$(ENCRYPT_BL32)))
+endif
+
+# Enable flags for C files
+$(eval $(call assert_booleans,\
+ $(sort \
+ PLAT_XLAT_TABLES_DYNAMIC \
+ STM32MP_EARLY_CONSOLE \
+ STM32MP_EMMC \
+ STM32MP_EMMC_BOOT \
+ STM32MP_RAW_NAND \
+ STM32MP_RECONFIGURE_CONSOLE \
+ STM32MP_SDMMC \
+ STM32MP_SPI_NAND \
+ STM32MP_SPI_NOR \
+ STM32MP_UART_PROGRAMMER \
+ STM32MP_USB_PROGRAMMER \
+)))
+
+$(eval $(call assert_numerics,\
+ $(sort \
+ STM32_TF_VERSION \
+ STM32MP_UART_BAUDRATE \
+)))
+
+$(eval $(call add_defines,\
+ $(sort \
+ PLAT_XLAT_TABLES_DYNAMIC \
+ STM32_TF_VERSION \
+ STM32MP_EARLY_CONSOLE \
+ STM32MP_EMMC \
+ STM32MP_EMMC_BOOT \
+ STM32MP_RAW_NAND \
+ STM32MP_RECONFIGURE_CONSOLE \
+ STM32MP_SDMMC \
+ STM32MP_SPI_NAND \
+ STM32MP_SPI_NOR \
+ STM32MP_UART_BAUDRATE \
+ STM32MP_UART_PROGRAMMER \
+ STM32MP_USB_PROGRAMMER \
+)))
+
+# Include paths and source files
+PLAT_INCLUDES += -Iplat/st/common/include/
+
+include lib/fconf/fconf.mk
+include lib/libfdt/libfdt.mk
+include lib/zlib/zlib.mk
+
+PLAT_BL_COMMON_SOURCES += common/uuid.c \
+ plat/st/common/stm32mp_common.c
+
+
+include lib/xlat_tables_v2/xlat_tables.mk
+PLAT_BL_COMMON_SOURCES += ${XLAT_TABLES_LIB_SRCS}
+
+PLAT_BL_COMMON_SOURCES += drivers/clk/clk.c \
+ drivers/delay_timer/delay_timer.c \
+ drivers/delay_timer/generic_delay_timer.c \
+ drivers/st/clk/stm32mp_clkfunc.c \
+ drivers/st/ddr/stm32mp_ddr.c \
+ drivers/st/gpio/stm32_gpio.c \
+ drivers/st/regulator/regulator_core.c \
+ drivers/st/regulator/regulator_fixed.c \
+ plat/st/common/stm32mp_dt.c
+
+BL2_SOURCES += ${FCONF_SOURCES} ${FCONF_DYN_SOURCES}
+BL2_SOURCES += $(ZLIB_SOURCES)
+
+BL2_SOURCES += drivers/io/io_fip.c \
+ plat/st/common/bl2_io_storage.c \
+ plat/st/common/stm32mp_fconf_io.c
+
+BL2_SOURCES += drivers/io/io_block.c \
+ drivers/io/io_mtd.c \
+ drivers/io/io_storage.c
+
+ifneq (${DECRYPTION_SUPPORT},none)
+BL2_SOURCES += drivers/io/io_encrypted.c
+endif
+
+ifeq (${TRUSTED_BOARD_BOOT},1)
+AUTH_SOURCES := drivers/auth/auth_mod.c \
+ drivers/auth/crypto_mod.c \
+ drivers/auth/img_parser_mod.c
+
+ifeq (${GENERATE_COT},1)
+TFW_NVCTR_VAL := 0
+NTFW_NVCTR_VAL := 0
+KEY_SIZE :=
+KEY_ALG := ecdsa
+HASH_ALG := sha256
+
+ifeq (${SAVE_KEYS},1)
+TRUSTED_WORLD_KEY ?= ${BUILD_PLAT}/trusted.pem
+NON_TRUSTED_WORLD_KEY ?= ${BUILD_PLAT}/non-trusted.pem
+BL32_KEY ?= ${BUILD_PLAT}/trusted_os.pem
+BL33_KEY ?= ${BUILD_PLAT}/non-trusted_os.pem
+endif
+
+endif
+TF_MBEDTLS_KEY_ALG := ecdsa
+
+ifneq (${MBEDTLS_DIR},)
+MBEDTLS_MAJOR=$(shell grep -hP "define MBEDTLS_VERSION_MAJOR" \
+${MBEDTLS_DIR}/include/mbedtls/*.h | grep -oe '\([0-9.]*\)')
+
+ifeq (${MBEDTLS_MAJOR}, 2)
+MBEDTLS_CONFIG_FILE ?= "<stm32mp_mbedtls_config-2.h>"
+endif
+
+ifeq (${MBEDTLS_MAJOR}, 3)
+MBEDTLS_CONFIG_FILE ?= "<stm32mp_mbedtls_config-3.h>"
+endif
+endif
+
+include drivers/auth/mbedtls/mbedtls_x509.mk
+
+COT_DESC_IN_DTB := 1
+AUTH_SOURCES += lib/fconf/fconf_cot_getter.c \
+ lib/fconf/fconf_tbbr_getter.c \
+ plat/st/common/stm32mp_crypto_lib.c
+
+BL2_SOURCES += $(AUTH_SOURCES) \
+ plat/st/common/stm32mp_trusted_boot.c
+endif
+
+ifneq ($(filter 1,${STM32MP_EMMC} ${STM32MP_SDMMC}),)
+BL2_SOURCES += drivers/mmc/mmc.c \
+ drivers/partition/gpt.c \
+ drivers/partition/partition.c
+endif
+
+ifneq ($(filter 1,${STM32MP_SPI_NAND} ${STM32MP_SPI_NOR}),)
+BL2_SOURCES += drivers/mtd/spi-mem/spi_mem.c
+endif
+
+ifeq (${STM32MP_RAW_NAND},1)
+$(eval $(call add_define_val,NAND_ONFI_DETECT,1))
+BL2_SOURCES += drivers/mtd/nand/raw_nand.c
+endif
+
+ifeq (${STM32MP_SPI_NAND},1)
+BL2_SOURCES += drivers/mtd/nand/spi_nand.c
+endif
+
+ifeq (${STM32MP_SPI_NOR},1)
+ifneq (${STM32MP_FORCE_MTD_START_OFFSET},)
+$(eval $(call add_define_val,STM32MP_NOR_FIP_OFFSET,${STM32MP_FORCE_MTD_START_OFFSET}))
+endif
+BL2_SOURCES += drivers/mtd/nor/spi_nor.c
+endif
+
+ifneq ($(filter 1,${STM32MP_RAW_NAND} ${STM32MP_SPI_NAND}),)
+ifneq (${STM32MP_FORCE_MTD_START_OFFSET},)
+$(eval $(call add_define_val,STM32MP_NAND_FIP_OFFSET,${STM32MP_FORCE_MTD_START_OFFSET}))
+endif
+BL2_SOURCES += drivers/mtd/nand/core.c
+endif
+
+ifneq ($(filter 1,${STM32MP_UART_PROGRAMMER} ${STM32MP_USB_PROGRAMMER}),)
+BL2_SOURCES += drivers/io/io_memmap.c
+endif
+
+ifeq (${STM32MP_UART_PROGRAMMER},1)
+BL2_SOURCES += plat/st/common/stm32cubeprogrammer_uart.c
+endif
+
+ifeq (${STM32MP_USB_PROGRAMMER},1)
+BL2_SOURCES += drivers/usb/usb_device.c \
+ plat/st/common/stm32cubeprogrammer_usb.c \
+ plat/st/common/usb_dfu.c
+endif
+
+BL2_SOURCES += drivers/st/ddr/stm32mp_ddr_test.c \
+ drivers/st/ddr/stm32mp_ram.c
+
+BL2_SOURCES += common/desc_image_load.c
+
+BL2_SOURCES += lib/optee/optee_utils.c
diff --git a/plat/st/common/common_rules.mk b/plat/st/common/common_rules.mk
new file mode 100644
index 0000000..fa48dfc
--- /dev/null
+++ b/plat/st/common/common_rules.mk
@@ -0,0 +1,79 @@
+#
+# Copyright (c) 2023, STMicroelectronics - All Rights Reserved
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# Compilation rules
+.PHONY: check_dtc_version stm32image clean_stm32image check_boot_device
+.SUFFIXES:
+
+all: check_dtc_version stm32image ${STM32_TF_STM32}
+
+distclean realclean clean: clean_stm32image
+
+bl2: check_boot_device
+
+check_boot_device:
+ @if [ ${STM32MP_EMMC} != 1 ] && \
+ [ ${STM32MP_SDMMC} != 1 ] && \
+ [ ${STM32MP_RAW_NAND} != 1 ] && \
+ [ ${STM32MP_SPI_NAND} != 1 ] && \
+ [ ${STM32MP_SPI_NOR} != 1 ] && \
+ [ ${STM32MP_UART_PROGRAMMER} != 1 ] && \
+ [ ${STM32MP_USB_PROGRAMMER} != 1 ]; then \
+ echo "No boot device driver is enabled"; \
+ false; \
+ fi
+
+stm32image: ${STM32IMAGE}
+
+${STM32IMAGE}: ${STM32IMAGE_SRC}
+ ${Q}${MAKE} CPPFLAGS="" --no-print-directory -C ${STM32IMAGEPATH}
+
+clean_stm32image:
+ ${Q}${MAKE} --no-print-directory -C ${STM32IMAGEPATH} clean
+
+check_dtc_version:
+ @if [ ${DTC_VERSION} -lt 10407 ]; then \
+ echo "dtc version too old (${DTC_V}), you need at least version 1.4.7"; \
+ false; \
+ fi
+
+# Create DTB file for BL2
+${BUILD_PLAT}/fdts/%-bl2.dts: fdts/%.dts fdts/${BL2_DTSI} | ${BUILD_PLAT} fdt_dirs
+ @echo '#include "$(patsubst fdts/%,%,$<)"' > $@
+ @echo '#include "${BL2_DTSI}"' >> $@
+
+${BUILD_PLAT}/fdts/%-bl2.dtb: ${BUILD_PLAT}/fdts/%-bl2.dts
+
+${BUILD_PLAT}/$(PLAT)-%.o: ${BUILD_PLAT}/fdts/%-bl2.dtb $(STM32_BINARY_MAPPING) bl2
+ @echo " AS $${PLAT}.S"
+ ${Q}${AS} ${ASFLAGS} ${TF_CFLAGS} \
+ -DDTB_BIN_PATH=\"$<\" \
+ -c $(word 2,$^) -o $@
+
+$(eval $(call MAKE_LD,${STM32_TF_LINKERFILE},$(STM32_LD_FILE),bl2))
+
+tf-a-%.elf: $(PLAT)-%.o ${STM32_TF_LINKERFILE}
+ @echo " LDS $<"
+ ${Q}${LD} -o $@ ${STM32_TF_ELF_LDFLAGS} -Map=$(@:.elf=.map) --script ${STM32_TF_LINKERFILE} $<
+
+tf-a-%.bin: tf-a-%.elf
+ ${Q}${OC} -O binary $< $@
+ @echo
+ @echo "Built $@ successfully"
+ @echo
+
+tf-a-%.stm32: tf-a-%.bin ${STM32_DEPS}
+ @echo
+ @echo "Generate $@"
+ $(eval LOADADDR = $(shell cat $(@:.stm32=.map) | grep RAM | awk '{print $$2}'))
+ $(eval ENTRY = $(shell cat $(@:.stm32=.map) | grep "__BL2_IMAGE_START" | awk '{print $$1}'))
+ ${Q}${STM32IMAGE} -s $< -d $@ \
+ -l $(LOADADDR) -e ${ENTRY} \
+ -v ${STM32_TF_VERSION} \
+ -m ${STM32_HEADER_VERSION_MAJOR} \
+ -n ${STM32_HEADER_VERSION_MINOR} \
+ -b ${STM32_HEADER_BL2_BINARY_TYPE}
+ @echo
diff --git a/plat/st/stm32mp1/include/stm32mp1_mbedtls_config-2.h b/plat/st/common/include/stm32mp_mbedtls_config-2.h
similarity index 96%
rename from plat/st/stm32mp1/include/stm32mp1_mbedtls_config-2.h
rename to plat/st/common/include/stm32mp_mbedtls_config-2.h
index 2f07621..66ff346 100644
--- a/plat/st/stm32mp1/include/stm32mp1_mbedtls_config-2.h
+++ b/plat/st/common/include/stm32mp_mbedtls_config-2.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2022, STMicroelectronics - All Rights Reserved
+ * Copyright (c) 2022-2023, STMicroelectronics - All Rights Reserved
*
* SPDX-License-Identifier: BSD-3-Clause
*/
diff --git a/plat/st/stm32mp1/include/stm32mp1_mbedtls_config-3.h b/plat/st/common/include/stm32mp_mbedtls_config-3.h
similarity index 96%
rename from plat/st/stm32mp1/include/stm32mp1_mbedtls_config-3.h
rename to plat/st/common/include/stm32mp_mbedtls_config-3.h
index d7dab1f..a812671 100644
--- a/plat/st/stm32mp1/include/stm32mp1_mbedtls_config-3.h
+++ b/plat/st/common/include/stm32mp_mbedtls_config-3.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2022, STMicroelectronics - All Rights Reserved
+ * Copyright (c) 2022-2023, STMicroelectronics - All Rights Reserved
*
* SPDX-License-Identifier: BSD-3-Clause
*/
diff --git a/plat/st/stm32mp1/platform.mk b/plat/st/stm32mp1/platform.mk
index cddc695..1d93983 100644
--- a/plat/st/stm32mp1/platform.mk
+++ b/plat/st/stm32mp1/platform.mk
@@ -4,28 +4,12 @@
# SPDX-License-Identifier: BSD-3-Clause
#
+include plat/st/common/common.mk
+
ARM_CORTEX_A7 := yes
ARM_WITH_NEON := yes
-RESET_TO_BL2 := 1
USE_COHERENT_MEM := 0
-STM32MP_EARLY_CONSOLE ?= 0
-STM32MP_RECONFIGURE_CONSOLE ?= 0
-STM32MP_UART_BAUDRATE ?= 115200
-
-TRUSTED_BOARD_BOOT ?= 0
-STM32MP_USE_EXTERNAL_HEAP ?= 0
-
-# Use secure library from the ROM code for authentication
-STM32MP_CRYPTO_ROM_LIB ?= 0
-
-# Please don't increment this value without good understanding of
-# the monotonic counter
-STM32_TF_VERSION ?= 0
-
-# Enable dynamic memory mapping
-PLAT_XLAT_TABLES_DYNAMIC := 1
-
# Default Device tree
DTB_FILE_NAME ?= stm32mp157c-ev1.dtb
@@ -89,17 +73,11 @@
endif
endif
-# STM32 image header binary type for BL2
-STM32_HEADER_BL2_BINARY_TYPE:= 0x10
-
ifeq ($(AARCH32_SP),sp_min)
# Disable Neon support: sp_min runtime may conflict with non-secure world
TF_CFLAGS += -mfloat-abi=soft
endif
-TF_CFLAGS += -Wsign-compare
-TF_CFLAGS += -Wformat-signedness
-
# Not needed for Cortex-A7
WORKAROUND_CVE_2017_5715:= 0
WORKAROUND_CVE_2022_23960:= 0
@@ -131,18 +109,6 @@
STM32_RNG_VER := 2
endif
-# Boot devices
-STM32MP_EMMC ?= 0
-STM32MP_SDMMC ?= 0
-STM32MP_RAW_NAND ?= 0
-STM32MP_SPI_NAND ?= 0
-STM32MP_SPI_NOR ?= 0
-STM32MP_EMMC_BOOT ?= 0
-
-# Serial boot devices
-STM32MP_USB_PROGRAMMER ?= 0
-STM32MP_UART_PROGRAMMER ?= 0
-
# Download load address for serial boot devices
DWL_BUFFER_BASE ?= 0xC7000000
@@ -157,35 +123,19 @@
BL32_DTSI := stm32mp15-bl32.dtsi
FDT_SOURCES += $(addprefix ${BUILD_PLAT}/fdts/, $(patsubst %.dtb,%-bl32.dts,$(DTB_FILE_NAME)))
endif
-endif
-
-$(eval DTC_V = $(shell $(DTC) -v | awk '{print $$NF}'))
-$(eval DTC_VERSION = $(shell printf "%d" $(shell echo ${DTC_V} | cut -d- -f1 | sed "s/\./0/g" | grep -o "[0-9]*")))
-DTC_CPPFLAGS += ${INCLUDES}
-DTC_FLAGS += -Wno-unit_address_vs_reg
-ifeq ($(shell test $(DTC_VERSION) -ge 10601; echo $$?),0)
-DTC_FLAGS += -Wno-interrupt_provider
endif
# Macros and rules to build TF binary
-STM32_TF_ELF_LDFLAGS := --hash-style=gnu --as-needed
STM32_TF_STM32 := $(addprefix ${BUILD_PLAT}/tf-a-, $(patsubst %.dtb,%.stm32,$(DTB_FILE_NAME)))
-STM32_TF_LINKERFILE := ${BUILD_PLAT}/stm32mp1.ld
+STM32_LD_FILE := plat/st/stm32mp1/stm32mp1.ld.S
+STM32_BINARY_MAPPING := plat/st/stm32mp1/stm32mp1.S
-ASFLAGS += -DBL2_BIN_PATH=\"${BUILD_PLAT}/bl2.bin\"
ifeq ($(AARCH32_SP),sp_min)
# BL32 is built only if using SP_MIN
BL32_DEP := bl32
ASFLAGS += -DBL32_BIN_PATH=\"${BUILD_PLAT}/bl32.bin\"
endif
-# Variables for use with stm32image
-STM32IMAGEPATH ?= tools/stm32image
-STM32IMAGE ?= ${STM32IMAGEPATH}/stm32image${BIN_EXT}
-STM32IMAGE_SRC := ${STM32IMAGEPATH}/stm32image.c
-
-FIP_DEPS += dtbs
-STM32MP_HW_CONFIG := ${BL33_CFG}
STM32MP_FW_CONFIG_NAME := $(patsubst %.dtb,%-fw-config.dtb,$(DTB_FILE_NAME))
STM32MP_FW_CONFIG := ${BUILD_PLAT}/fdts/$(STM32MP_FW_CONFIG_NAME)
ifneq (${AARCH32_SP},none)
@@ -193,8 +143,6 @@
endif
# Add the FW_CONFIG to FIP and specify the same to certtool
$(eval $(call TOOL_ADD_PAYLOAD,${STM32MP_FW_CONFIG},--fw-config))
-# Add the HW_CONFIG to FIP and specify the same to certtool
-$(eval $(call TOOL_ADD_PAYLOAD,${STM32MP_HW_CONFIG},--hw-config))
ifeq ($(GENERATE_COT),1)
STM32MP_CFG_CERT := $(BUILD_PLAT)/stm32mp_cfg_cert.crt
# Add the STM32MP_CFG_CERT to FIP and specify the same to certtool
@@ -203,15 +151,6 @@
ifeq ($(AARCH32_SP),sp_min)
STM32MP_TOS_FW_CONFIG := $(addprefix ${BUILD_PLAT}/fdts/, $(patsubst %.dtb,%-bl32.dtb,$(DTB_FILE_NAME)))
$(eval $(call TOOL_ADD_PAYLOAD,${STM32MP_TOS_FW_CONFIG},--tos-fw-config))
-else
-# Add the build options to pack Trusted OS Extra1 and Trusted OS Extra2 images
-# in the FIP if the platform requires.
-ifneq ($(BL32_EXTRA1),)
-$(eval $(call TOOL_ADD_IMG,BL32_EXTRA1,--tos-fw-extra1,,$(ENCRYPT_BL32)))
-endif
-ifneq ($(BL32_EXTRA2),)
-$(eval $(call TOOL_ADD_IMG,BL32_EXTRA2,--tos-fw-extra2,,$(ENCRYPT_BL32)))
-endif
endif
# Enable flags for C files
@@ -220,20 +159,9 @@
PKA_USE_BRAINPOOL_P256T1 \
PKA_USE_NIST_P256 \
PLAT_TBBR_IMG_DEF \
- PLAT_XLAT_TABLES_DYNAMIC \
STM32MP_CRYPTO_ROM_LIB \
STM32MP_DDR_32BIT_INTERFACE \
STM32MP_DDR_DUAL_AXI_PORT \
- STM32MP_EARLY_CONSOLE \
- STM32MP_EMMC \
- STM32MP_EMMC_BOOT \
- STM32MP_RAW_NAND \
- STM32MP_RECONFIGURE_CONSOLE \
- STM32MP_SDMMC \
- STM32MP_SPI_NAND \
- STM32MP_SPI_NOR \
- STM32MP_UART_PROGRAMMER \
- STM32MP_USB_PROGRAMMER \
STM32MP_USE_EXTERNAL_HEAP \
STM32MP13 \
STM32MP15 \
@@ -246,8 +174,6 @@
STM32_HEADER_VERSION_MAJOR \
STM32_RNG_VER \
STM32_TF_A_COPIES \
- STM32_TF_VERSION \
- STM32MP_UART_BAUDRATE \
)))
$(eval $(call add_defines,\
@@ -257,41 +183,22 @@
PKA_USE_NIST_P256 \
PLAT_PARTITION_MAX_ENTRIES \
PLAT_TBBR_IMG_DEF \
- PLAT_XLAT_TABLES_DYNAMIC \
STM32_HASH_VER \
STM32_HEADER_VERSION_MAJOR \
STM32_RNG_VER \
STM32_TF_A_COPIES \
- STM32_TF_VERSION \
STM32MP_CRYPTO_ROM_LIB \
STM32MP_DDR_32BIT_INTERFACE \
STM32MP_DDR_DUAL_AXI_PORT \
- STM32MP_EARLY_CONSOLE \
- STM32MP_EMMC \
- STM32MP_EMMC_BOOT \
- STM32MP_RAW_NAND \
- STM32MP_RECONFIGURE_CONSOLE \
- STM32MP_SDMMC \
- STM32MP_SPI_NAND \
- STM32MP_SPI_NOR \
- STM32MP_UART_BAUDRATE \
- STM32MP_UART_PROGRAMMER \
- STM32MP_USB_PROGRAMMER \
STM32MP_USE_EXTERNAL_HEAP \
STM32MP13 \
STM32MP15 \
)))
# Include paths and source files
-PLAT_INCLUDES := -Iplat/st/common/include/
PLAT_INCLUDES += -Iplat/st/stm32mp1/include/
-include lib/fconf/fconf.mk
-include lib/libfdt/libfdt.mk
-
-PLAT_BL_COMMON_SOURCES := common/uuid.c \
- plat/st/common/stm32mp_common.c \
- plat/st/stm32mp1/stm32mp1_private.c
+PLAT_BL_COMMON_SOURCES += plat/st/stm32mp1/stm32mp1_private.c
PLAT_BL_COMMON_SOURCES += drivers/st/uart/aarch32/stm32_console.S
@@ -299,28 +206,16 @@
PLAT_BL_COMMON_SOURCES += plat/st/stm32mp1/stm32mp1_stack_protector.c
endif
-include lib/xlat_tables_v2/xlat_tables.mk
-PLAT_BL_COMMON_SOURCES += ${XLAT_TABLES_LIB_SRCS}
-
PLAT_BL_COMMON_SOURCES += lib/cpus/aarch32/cortex_a7.S
PLAT_BL_COMMON_SOURCES += drivers/arm/tzc/tzc400.c \
- drivers/clk/clk.c \
- drivers/delay_timer/delay_timer.c \
- drivers/delay_timer/generic_delay_timer.c \
drivers/st/bsec/bsec2.c \
- drivers/st/clk/stm32mp_clkfunc.c \
- drivers/st/ddr/stm32mp_ddr.c \
drivers/st/ddr/stm32mp1_ddr_helpers.c \
- drivers/st/gpio/stm32_gpio.c \
drivers/st/i2c/stm32_i2c.c \
drivers/st/iwdg/stm32_iwdg.c \
drivers/st/pmic/stm32mp_pmic.c \
drivers/st/pmic/stpmic1.c \
- drivers/st/regulator/regulator_core.c \
- drivers/st/regulator/regulator_fixed.c \
drivers/st/reset/stm32mp1_reset.c \
- plat/st/common/stm32mp_dt.c \
plat/st/stm32mp1/stm32mp1_dbgmcu.c \
plat/st/stm32mp1/stm32mp1_helper.S \
plat/st/stm32mp1/stm32mp1_syscfg.c
@@ -333,195 +228,54 @@
PLAT_BL_COMMON_SOURCES += drivers/st/clk/stm32mp1_clk.c
endif
-BL2_SOURCES += ${FCONF_SOURCES} ${FCONF_DYN_SOURCES}
-
-BL2_SOURCES += drivers/io/io_fip.c \
- plat/st/common/bl2_io_storage.c \
- plat/st/common/stm32mp_fconf_io.c \
- plat/st/stm32mp1/plat_bl2_mem_params_desc.c \
+BL2_SOURCES += plat/st/stm32mp1/plat_bl2_mem_params_desc.c \
plat/st/stm32mp1/stm32mp1_fconf_firewall.c
-include lib/zlib/zlib.mk
-
ifeq (${PSA_FWU_SUPPORT},1)
include drivers/fwu/fwu.mk
endif
-
-BL2_SOURCES += $(ZLIB_SOURCES)
-
-BL2_SOURCES += drivers/io/io_block.c \
- drivers/io/io_mtd.c \
- drivers/io/io_storage.c \
- drivers/st/crypto/stm32_hash.c \
+BL2_SOURCES += drivers/st/crypto/stm32_hash.c \
plat/st/stm32mp1/bl2_plat_setup.c
-ifneq (${DECRYPTION_SUPPORT},none)
-BL2_SOURCES += drivers/io/io_encrypted.c
-endif
-
ifeq (${TRUSTED_BOARD_BOOT},1)
-AUTH_SOURCES := drivers/auth/auth_mod.c \
- drivers/auth/crypto_mod.c \
- drivers/auth/img_parser_mod.c
-
-ifeq (${GENERATE_COT},1)
-TFW_NVCTR_VAL := 0
-NTFW_NVCTR_VAL := 0
-KEY_SIZE :=
-KEY_ALG := ecdsa
-HASH_ALG := sha256
-
-ifeq (${SAVE_KEYS},1)
-TRUSTED_WORLD_KEY ?= ${BUILD_PLAT}/trusted.pem
-NON_TRUSTED_WORLD_KEY ?= ${BUILD_PLAT}/non-trusted.pem
-BL32_KEY ?= ${BUILD_PLAT}/trusted_os.pem
-BL33_KEY ?= ${BUILD_PLAT}/non-trusted_os.pem
-endif
-
-endif
-TF_MBEDTLS_KEY_ALG := ecdsa
-
-ifneq (${MBEDTLS_DIR},)
-MBEDTLS_MAJOR=$(shell grep -hP "define MBEDTLS_VERSION_MAJOR" \
-${MBEDTLS_DIR}/include/mbedtls/*.h | grep -oe '\([0-9.]*\)')
-
-ifeq (${MBEDTLS_MAJOR}, 2)
-MBEDTLS_CONFIG_FILE ?= "<stm32mp1_mbedtls_config-2.h>"
-endif
-
-ifeq (${MBEDTLS_MAJOR}, 3)
-MBEDTLS_CONFIG_FILE ?= "<stm32mp1_mbedtls_config-3.h>"
-endif
-endif
-
-include drivers/auth/mbedtls/mbedtls_x509.mk
-
-COT_DESC_IN_DTB := 1
-AUTH_SOURCES += lib/fconf/fconf_cot_getter.c \
- lib/fconf/fconf_tbbr_getter.c \
- plat/st/common/stm32mp_crypto_lib.c
-
ifeq ($(STM32MP13),1)
-AUTH_SOURCES += drivers/st/crypto/stm32_pka.c
-AUTH_SOURCES += drivers/st/crypto/stm32_saes.c
+BL2_SOURCES += drivers/st/crypto/stm32_pka.c
+BL2_SOURCES += drivers/st/crypto/stm32_saes.c
endif
-
-BL2_SOURCES += $(AUTH_SOURCES) \
- plat/st/common/stm32mp_trusted_boot.c
endif
ifneq ($(filter 1,${STM32MP_EMMC} ${STM32MP_SDMMC}),)
-BL2_SOURCES += drivers/mmc/mmc.c \
- drivers/partition/gpt.c \
- drivers/partition/partition.c \
- drivers/st/mmc/stm32_sdmmc2.c
+BL2_SOURCES += drivers/st/mmc/stm32_sdmmc2.c
endif
ifeq (${STM32MP_RAW_NAND},1)
-$(eval $(call add_define_val,NAND_ONFI_DETECT,1))
-BL2_SOURCES += drivers/mtd/nand/raw_nand.c \
- drivers/st/fmc/stm32_fmc2_nand.c
-endif
-
-ifeq (${STM32MP_SPI_NAND},1)
-BL2_SOURCES += drivers/mtd/nand/spi_nand.c
+BL2_SOURCES += drivers/st/fmc/stm32_fmc2_nand.c
endif
-ifeq (${STM32MP_SPI_NOR},1)
-ifneq (${STM32MP_FORCE_MTD_START_OFFSET},)
-$(eval $(call add_define_val,STM32MP_NOR_FIP_OFFSET,${STM32MP_FORCE_MTD_START_OFFSET}))
-endif
-BL2_SOURCES += drivers/mtd/nor/spi_nor.c
-endif
-
ifneq ($(filter 1,${STM32MP_SPI_NAND} ${STM32MP_SPI_NOR}),)
-BL2_SOURCES += drivers/mtd/spi-mem/spi_mem.c \
- drivers/st/spi/stm32_qspi.c
-endif
-
-ifneq ($(filter 1,${STM32MP_RAW_NAND} ${STM32MP_SPI_NAND}),)
-ifneq (${STM32MP_FORCE_MTD_START_OFFSET},)
-$(eval $(call add_define_val,STM32MP_NAND_FIP_OFFSET,${STM32MP_FORCE_MTD_START_OFFSET}))
-endif
-BL2_SOURCES += drivers/mtd/nand/core.c
+BL2_SOURCES += drivers/st/spi/stm32_qspi.c
endif
ifneq ($(filter 1,${STM32MP_RAW_NAND} ${STM32MP_SPI_NAND} ${STM32MP_SPI_NOR}),)
BL2_SOURCES += plat/st/stm32mp1/stm32mp1_boot_device.c
endif
-ifneq ($(filter 1,${STM32MP_UART_PROGRAMMER} ${STM32MP_USB_PROGRAMMER}),)
-BL2_SOURCES += drivers/io/io_memmap.c
-endif
-
ifeq (${STM32MP_UART_PROGRAMMER},1)
-BL2_SOURCES += drivers/st/uart/stm32_uart.c \
- plat/st/common/stm32cubeprogrammer_uart.c
+BL2_SOURCES += drivers/st/uart/stm32_uart.c
endif
ifeq (${STM32MP_USB_PROGRAMMER},1)
#The DFU stack uses only one end point, reduce the USB stack footprint
$(eval $(call add_define_val,CONFIG_USBD_EP_NB,1U))
BL2_SOURCES += drivers/st/usb/stm32mp1_usb.c \
- drivers/usb/usb_device.c \
- plat/st/common/stm32cubeprogrammer_usb.c \
- plat/st/common/usb_dfu.c \
plat/st/stm32mp1/stm32mp1_usb_dfu.c
endif
-BL2_SOURCES += drivers/st/ddr/stm32mp_ddr_test.c \
- drivers/st/ddr/stm32mp_ram.c \
- drivers/st/ddr/stm32mp1_ddr.c \
+BL2_SOURCES += drivers/st/ddr/stm32mp1_ddr.c \
drivers/st/ddr/stm32mp1_ram.c
-BL2_SOURCES += common/desc_image_load.c \
- plat/st/stm32mp1/plat_image_load.c
-
-BL2_SOURCES += lib/optee/optee_utils.c
-
-# Compilation rules
-.PHONY: check_dtc_version stm32image clean_stm32image check_boot_device
-.SUFFIXES:
-
-all: check_dtc_version stm32image ${STM32_TF_STM32}
-
-distclean realclean clean: clean_stm32image
-
-bl2: check_boot_device
-
-check_boot_device:
- @if [ ${STM32MP_EMMC} != 1 ] && \
- [ ${STM32MP_SDMMC} != 1 ] && \
- [ ${STM32MP_RAW_NAND} != 1 ] && \
- [ ${STM32MP_SPI_NAND} != 1 ] && \
- [ ${STM32MP_SPI_NOR} != 1 ] && \
- [ ${STM32MP_UART_PROGRAMMER} != 1 ] && \
- [ ${STM32MP_USB_PROGRAMMER} != 1 ]; then \
- echo "No boot device driver is enabled"; \
- false; \
- fi
-
-stm32image: ${STM32IMAGE}
-
-${STM32IMAGE}: ${STM32IMAGE_SRC}
- ${Q}${MAKE} CPPFLAGS="" --no-print-directory -C ${STM32IMAGEPATH}
-
-clean_stm32image:
- ${Q}${MAKE} --no-print-directory -C ${STM32IMAGEPATH} clean
-
-check_dtc_version:
- @if [ ${DTC_VERSION} -lt 10404 ]; then \
- echo "dtc version too old (${DTC_V}), you need at least version 1.4.4"; \
- false; \
- fi
-
-# Create DTB file for BL2
-${BUILD_PLAT}/fdts/%-bl2.dts: fdts/%.dts fdts/${BL2_DTSI} | ${BUILD_PLAT} fdt_dirs
- @echo '#include "$(patsubst fdts/%,%,$<)"' > $@
- @echo '#include "${BL2_DTSI}"' >> $@
-
-${BUILD_PLAT}/fdts/%-bl2.dtb: ${BUILD_PLAT}/fdts/%-bl2.dts
+BL2_SOURCES += plat/st/stm32mp1/plat_image_load.c
ifeq ($(AARCH32_SP),sp_min)
# Create DTB file for BL32
@@ -532,33 +286,4 @@
${BUILD_PLAT}/fdts/%-bl32.dtb: ${BUILD_PLAT}/fdts/%-bl32.dts
endif
-${BUILD_PLAT}/stm32mp1-%.o: ${BUILD_PLAT}/fdts/%-bl2.dtb plat/st/stm32mp1/stm32mp1.S bl2
- @echo " AS stm32mp1.S"
- ${Q}${AS} ${ASFLAGS} ${TF_CFLAGS} \
- -DDTB_BIN_PATH=\"$<\" \
- -c plat/st/stm32mp1/stm32mp1.S -o $@
-
-$(eval $(call MAKE_LD,${STM32_TF_LINKERFILE},plat/st/stm32mp1/stm32mp1.ld.S,bl2))
-
-tf-a-%.elf: stm32mp1-%.o ${STM32_TF_LINKERFILE}
- @echo " LDS $<"
- ${Q}${LD} -o $@ ${STM32_TF_ELF_LDFLAGS} -Map=$(@:.elf=.map) --script ${STM32_TF_LINKERFILE} $<
-
-tf-a-%.bin: tf-a-%.elf
- ${Q}${OC} -O binary $< $@
- @echo
- @echo "Built $@ successfully"
- @echo
-
-tf-a-%.stm32: ${STM32IMAGE} tf-a-%.bin
- @echo
- @echo "Generate $@"
- $(eval LOADADDR = $(shell cat $(@:.stm32=.map) | grep RAM | awk '{print $$2}'))
- $(eval ENTRY = $(shell cat $(@:.stm32=.map) | grep "__BL2_IMAGE_START" | awk '{print $$1}'))
- ${Q}${STM32IMAGE} -s $(word 2,$^) -d $@ \
- -l $(LOADADDR) -e ${ENTRY} \
- -v ${STM32_TF_VERSION} \
- -m ${STM32_HEADER_VERSION_MAJOR} \
- -n ${STM32_HEADER_VERSION_MINOR} \
- -b ${STM32_HEADER_BL2_BINARY_TYPE}
- @echo
+include plat/st/common/common_rules.mk