fix(drivers/marvell/comphy): change reg_set() / reg_set16() to update semantics
Currently reg_set() and reg_set16() are implemented via
mmio_clrsetbits_32(), meaning that first bits from mask are cleared,
then data bits are set.
But these function are used everywhere according to update semantics,
where only those bits that are in mask are allowed to be changed.
Example from phy-comphy-cp110.c
mask = HPIPE_RST_CLK_CTRL_PIPE_RST_MASK;
data = 0x1 << HPIPE_RST_CLK_CTRL_PIPE_RST_OFFSET;
/* Set PHY datapath width mode for V0 */
mask |= HPIPE_RST_CLK_CTRL_FIXED_PCLK_MASK;
data |= 0x0 << HPIPE_RST_CLK_CTRL_FIXED_PCLK_OFFSET;
/* Set Data bus width USB mode for V0 */
mask |= HPIPE_RST_CLK_CTRL_PIPE_WIDTH_MASK;
data |= 0x0 << HPIPE_RST_CLK_CTRL_PIPE_WIDTH_OFFSET;
/* Set CORE_CLK output frequency for 250Mhz */
mask |= HPIPE_RST_CLK_CTRL_CORE_FREQ_SEL_MASK;
data |= 0x0 << HPIPE_RST_CLK_CTRL_CORE_FREQ_SEL_OFFSET;
reg_set(hpipe_addr + HPIPE_RST_CLK_CTRL_REG, data, mask);
Change the implementation to update semantics by anding data with mask.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: Ic72a8f64916274e08baef0b3f4c44a4fa07c1a6c
1 file changed