diff --git a/plat/rpi/rpi5/platform.mk b/plat/rpi/rpi5/platform.mk
new file mode 100644
index 0000000..81b7ded
--- /dev/null
+++ b/plat/rpi/rpi5/platform.mk
@@ -0,0 +1,107 @@
+#
+# Copyright (c) 2015-2024, Arm Limited and Contributors. All rights reserved.
+# Copyright (c) 2024, Mario Bălănică <mariobalanica02@gmail.com>
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+include lib/xlat_tables_v2/xlat_tables.mk
+
+include drivers/arm/gic/v2/gicv2.mk
+
+PLAT_INCLUDES		:=	-Iplat/rpi/common/include			\
+				-Iplat/rpi/rpi5/include
+
+PLAT_BL_COMMON_SOURCES	:=	drivers/arm/pl011/aarch64/pl011_console.S 	\
+				plat/rpi/common/rpi3_common.c			\
+				plat/rpi/common/rpi3_console_pl011.c		\
+				${XLAT_TABLES_LIB_SRCS}
+
+BL31_SOURCES		+=	lib/cpus/aarch64/cortex_a76.S			\
+				plat/rpi/common/aarch64/plat_helpers.S		\
+				plat/rpi/common/aarch64/armstub8_header.S 	\
+				drivers/delay_timer/delay_timer.c		\
+				plat/common/plat_gicv2.c			\
+				plat/rpi/common/rpi4_bl31_setup.c		\
+				plat/rpi/rpi5/rpi5_setup.c			\
+				plat/rpi/common/rpi3_pm.c			\
+				plat/common/plat_psci_common.c			\
+				plat/rpi/common/rpi3_topology.c			\
+				${GICV2_SOURCES}
+
+# For now we only support BL31, using the kernel loaded by the GPU firmware.
+RESET_TO_BL31		:=	1
+
+# All CPUs enter armstub8.bin.
+COLD_BOOT_SINGLE_CPU	:=	0
+
+# Tune compiler for Cortex-A76
+ifeq ($(notdir $(CC)),armclang)
+    TF_CFLAGS_aarch64	+=	-mcpu=cortex-a76
+else ifneq ($(findstring clang,$(notdir $(CC))),)
+    TF_CFLAGS_aarch64	+=	-mcpu=cortex-a76
+else
+    TF_CFLAGS_aarch64	+=	-mtune=cortex-a76
+endif
+
+# Add support for platform supplied linker script for BL31 build
+$(eval $(call add_define,PLAT_EXTRA_LD_SCRIPT))
+
+# Enable all errata workarounds for Cortex-A76 r4p1
+ERRATA_A76_1946160		:= 1
+ERRATA_A76_2743102		:= 1
+
+# Add new default target when compiling this platform
+all: bl31
+
+# Build config flags
+# ------------------
+
+# Disable stack protector by default
+ENABLE_STACK_PROTECTOR	 	:= 0
+
+# Have different sections for code and rodata
+SEPARATE_CODE_AND_RODATA	:= 1
+
+# Hardware-managed coherency
+HW_ASSISTED_COHERENCY		:= 1
+USE_COHERENT_MEM		:= 0
+
+# Cortex-A76 is 64-bit only
+CTX_INCLUDE_AARCH32_REGS	:= 0
+
+# Platform build flags
+# --------------------
+
+# There is not much else than a Linux kernel to load at the moment.
+RPI3_DIRECT_LINUX_BOOT		:= 1
+
+# BL33 images can only be AArch64 on this platform.
+RPI3_BL33_IN_AARCH32		:= 0
+
+# UART to use at runtime. -1 means the runtime UART is disabled.
+# Any other value means the default UART will be used.
+RPI3_RUNTIME_UART		:= 0
+
+# Use normal memory mapping for ROM, FIP, SRAM and DRAM
+RPI3_USE_UEFI_MAP		:= 0
+
+# Process platform flags
+# ----------------------
+
+$(eval $(call add_define,RPI3_BL33_IN_AARCH32))
+$(eval $(call add_define,RPI3_DIRECT_LINUX_BOOT))
+ifdef RPI3_PRELOADED_DTB_BASE
+$(eval $(call add_define,RPI3_PRELOADED_DTB_BASE))
+endif
+$(eval $(call add_define,RPI3_RUNTIME_UART))
+$(eval $(call add_define,RPI3_USE_UEFI_MAP))
+
+ifeq (${ARCH},aarch32)
+  $(error Error: AArch32 not supported on rpi5)
+endif
+
+ifneq ($(ENABLE_STACK_PROTECTOR), 0)
+PLAT_BL_COMMON_SOURCES	+=	drivers/rpi3/rng/rpi3_rng.c		\
+				plat/rpi/common/rpi3_stack_protector.c
+endif