feat(st): update STM32MP DT files
This is an alignment with Linux DT files that have been merged in
stm32 tree [1], and will be in Linux 6.7.
The /omit-if-no-ref/ in overlay files are now removed, as already in
pinctrl files.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32.git
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Iab94b0ba7a4a0288ca53d1ae57ab590566967415
diff --git a/fdts/stm32mp131.dtsi b/fdts/stm32mp131.dtsi
index 2be39af..8bcf363 100644
--- a/fdts/stm32mp131.dtsi
+++ b/fdts/stm32mp131.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
- * Copyright (C) STMicroelectronics 2022 - All Rights Reserved
+ * Copyright (C) 2022-2023, STMicroelectronics - All Rights Reserved
* Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
*/
#include <dt-bindings/clock/stm32mp13-clks.h>
@@ -276,23 +276,20 @@
};
fmc: memory-controller@58002000 {
- #address-cells = <2>;
- #size-cells = <1>;
compatible = "st,stm32mp1-fmc2-ebi";
reg = <0x58002000 0x1000>;
- clocks = <&rcc FMC_K>;
- resets = <&rcc FMC_R>;
- status = "disabled";
-
ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
<1 0 0x64000000 0x04000000>, /* EBI CS 2 */
<2 0 0x68000000 0x04000000>, /* EBI CS 3 */
<3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
<4 0 0x80000000 0x10000000>; /* NAND */
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clocks = <&rcc FMC_K>;
+ resets = <&rcc FMC_R>;
+ status = "disabled";
nand-controller@4,0 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "st,stm32mp1-fmc2-nfc";
reg = <4 0x00000000 0x1000>,
<4 0x08010000 0x1000>,
@@ -300,6 +297,8 @@
<4 0x01000000 0x1000>,
<4 0x09010000 0x1000>,
<4 0x09020000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -341,7 +340,7 @@
status = "disabled";
};
- usbh_ohci: usbh-ohci@5800c000 {
+ usbh_ohci: usb@5800c000 {
compatible = "generic-ohci";
reg = <0x5800c000 0x1000>;
clocks = <&rcc USBH>;
@@ -350,7 +349,7 @@
status = "disabled";
};
- usbh_ehci: usbh-ehci@5800d000 {
+ usbh_ehci: usb@5800d000 {
compatible = "generic-ehci";
reg = <0x5800d000 0x1000>;
clocks = <&rcc USBH>;
@@ -424,7 +423,7 @@
cfg0_otp: cfg0_otp@0 {
reg = <0x0 0x2>;
};
- part_number_otp: part_number_otp@4 {
+ part_number_otp: part-number-otp@4 {
reg = <0x4 0x2>;
};
monotonic_otp: monotonic_otp@10 {
@@ -470,7 +469,6 @@
ranges = <0 0x50002000 0x8400>;
interrupt-parent = <&exti>;
st,syscfg = <&exti 0x60 0xff>;
- pins-are-numbered;
gpioa: gpio@50002000 {
gpio-controller;