Merge "refactor(plat/marvell): move doc platform build options into own subsections" into integration
diff --git a/docs/plat/marvell/armada/build.rst b/docs/plat/marvell/armada/build.rst
index 09b4fa4..ca84be6 100644
--- a/docs/plat/marvell/armada/build.rst
+++ b/docs/plat/marvell/armada/build.rst
@@ -98,34 +98,10 @@
There is no reason to enable this feature if OP-TEE OS built with CFG_WITH_PAGER=n.
Only set LLC_SRAM=1 if OP-TEE OS is built with CFG_WITH_PAGER=y.
-- CM3_SYSTEM_RESET
-
- For Armada37x0 only, when ``CM3_SYSTEM_RESET=1``, the Cortex-M3 secure coprocessor will
- be used for system reset.
- TF-A will send command 0x0009 with a magic value via the rWTM mailbox interface to the
- Cortex-M3 secure coprocessor.
- The firmware running in the coprocessor must either implement this functionality or
- ignore the 0x0009 command (which is true for the firmware from A3700-utils-marvell
- repository). If this option is enabled but the firmware does not support this command,
- an error message will be printed prior trying to reboot via the usual way.
-
- This option is needed on Turris MOX as a workaround to a HW bug which causes reset to
- sometime hang the board.
-
-- A3720_DB_PM_WAKEUP_SRC
-
- For Armada 3720 Develpment Board only, when ``A3720_DB_PM_WAKEUP_SRC=1``,
- TF-A will setup PM wake up src configuration. This option is disabled by default.
-
- MARVELL_SECURE_BOOT
Build trusted(=1)/non trusted(=0) image, default is non trusted.
-
-- BLE_PATH
-
- Points to BLE (Binary ROM extension) sources folder.
- Only required for A7K/8K/CN913x builds.
- The parameter is optional, its default value is ``plat/marvell/armada/a8k/common/ble``.
+ This parameter is used only for ``mrvl_flash`` and ``mrvl_uart`` targets.
- MV_DDR_PATH
@@ -140,6 +116,9 @@
Do not remove any parts of git checkout becuase build process and other
applications need them for correct building and version determination.
+
+CN913x specific build options:
+
- CP_NUM
Total amount of CPs (South Bridge) connected to AP. When the parameter is omitted,
@@ -148,9 +127,43 @@
family (PLAT=t9130), which can have external CPs connected to the MCI ports. Valid
values with CP_NUM are in a range of 1 to 3.
+
+A7K/8K/CN913x specific build options:
+
+- BLE_PATH
+
+ Points to BLE (Binary ROM extension) sources folder.
+ The parameter is optional, its default value is ``plat/marvell/armada/a8k/common/ble``
+ which uses TF-A in-tree BLE implementation.
+
+
+Armada37x0 specific build options:
+
+- CM3_SYSTEM_RESET
+
+ When ``CM3_SYSTEM_RESET=1``, the Cortex-M3 secure coprocessor will be used for system reset.
+
+ TF-A will send command 0x0009 with a magic value via the rWTM mailbox interface to the
+ Cortex-M3 secure coprocessor.
+ The firmware running in the coprocessor must either implement this functionality or
+ ignore the 0x0009 command (which is true for the firmware from A3700-utils-marvell
+ repository). If this option is enabled but the firmware does not support this command,
+ an error message will be printed prior trying to reboot via the usual way.
+
+ This option is needed on Turris MOX as a workaround to a HW bug which causes reset to
+ sometime hang the board.
+
+- A3720_DB_PM_WAKEUP_SRC
+
+ For Armada 3720 Development Board only, when ``A3720_DB_PM_WAKEUP_SRC=1``,
+ TF-A will setup PM wake up src configuration. This option is disabled by default.
+
+
+Armada37x0 specific build options for ``mrvl_flash`` and ``mrvl_uart`` targets:
+
- DDR_TOPOLOGY
- For Armada37x0 only, the DDR topology map index/name, default is 0.
+ The DDR topology map index/name, default is 0.
Supported Options:
- 0 - DDR3 1CS 512MB (DB-88F3720-DDR3-Modular, EspressoBin V3-V5)
@@ -165,7 +178,7 @@
- CLOCKSPRESET
- For Armada37x0 only, the clock tree configuration preset including CPU and DDR frequency,
+ The clock tree configuration preset including CPU and DDR frequency,
default is CPU_800_DDR_800.
- CPU_600_DDR_600 - CPU at 600 MHz, DDR at 600 MHz
@@ -182,7 +195,7 @@
- BOOTDEV
- For Armada37x0 only, the flash boot device, default is ``SPINOR``.
+ The flash boot device, default is ``SPINOR``.
Currently, Armada37x0 only supports ``SPINOR``, ``SPINAND``, ``EMMCNORM`` and ``SATA``:
@@ -201,7 +214,7 @@
- PARTNUM
- For Armada37x0 only, the boot partition number, default is 0.
+ The boot partition number, default is 0.
To boot from eMMC, the value should be aligned with the parameter in
U-Boot with name of ``CONFIG_SYS_MMC_ENV_PART``, whose value by default is
@@ -210,7 +223,7 @@
- WTMI_IMG
- For Armada37x0 only, the path of the binary can point to an image which
+ The path of the binary can point to an image which
does nothing, an image which supports EFUSE or a customized CM3 firmware
binary. The default image is ``fuse.bin`` that built from sources in WTP
folder, which is the next option. If the default image is OK, then this
@@ -233,8 +246,6 @@
- WTP
- For Armada37x0 only.
-
Specify path to the full checkout of Marvell A3700-utils-marvell git
repository. Checkout must contain also .git subdirectory because WTP
build process calls git commands.
@@ -247,7 +258,7 @@
- CRYPTOPP_PATH
- For Armada37x0 only, use this parameter to point to Crypto++ source code
+ Use this parameter to point to Crypto++ source code
directory. If this option is specified then Crypto++ source code in
CRYPTOPP_PATH directory will be automatically compiled. Crypto++ library
is required for building WTP image tool. Either CRYPTOPP_PATH or
@@ -255,12 +266,12 @@
- CRYPTOPP_LIBDIR
- For Armada37x0 only, use this parameter to point to the directory with
+ Use this parameter to point to the directory with
compiled Crypto++ library. By default it points to the CRYPTOPP_PATH.
- CRYPTOPP_INCDIR
- For Armada37x0 only, use this parameter to point to the directory with
+ Use this parameter to point to the directory with
header files of Crypto++ library. By default it points to the CRYPTOPP_PATH.
@@ -356,8 +367,8 @@
Tools and external components installation
------------------------------------------
-Armada37x0 Builds require installation of 3 components
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Armada37x0 Builds require installation of additional components
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
(1) ARM cross compiler capable of building images for the service CPU (CM3).
This component is usually included in the Linux host packages.
@@ -390,6 +401,10 @@
https://github.com/weidai11/cryptopp.git
+(5) Optional CZ.NIC's Armada 3720 Secure Firmware:
+
+ https://gitlab.nic.cz/turris/mox-boot-builder.git
+
Armada70x0 and Armada80x0 Builds require installation of an additional component
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~