fdts: n1sdp: DTS file for single-chip and multi-chip environment.
N1SDP supports both single-chip and multi-chip environment.
Added DTS file for both type of environment.
Enabled DTS files compilation for N1SDP platform.
Change-Id: I66af88dcfb841893eb6ed2ca18d3025de81236a0
Co-authored-by: Robin Murphy <Robin.Murphy@arm.com>
Co-authored-by: Sayanta Pattanayak <sayanta.pattanayak@arm.com>
Co-authored-by: Manoj Kumar <manoj.kumar3@arm.com>
Co-authored-by: Anurag Koul <anurag.koul@arm.com>
Signed-off-by: Sayanta Pattanayak <sayanta.pattanayak@arm.com>
diff --git a/fdts/n1sdp-multi-chip.dts b/fdts/n1sdp-multi-chip.dts
new file mode 100644
index 0000000..b58d9d8
--- /dev/null
+++ b/fdts/n1sdp-multi-chip.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: (GPL-2.0 or BSD-3-Clause)
+/*
+ * Copyright (c) 2019-2020, Arm Limited.
+ */
+
+#include "n1sdp-single-chip.dts"
+
+/ {
+ cpus {
+ cpu4@100000000 {
+ compatible = "arm,neoverse-n1";
+ reg = <0x1 0x0>;
+ device_type = "cpu";
+ enable-method = "psci";
+ numa-node-id = <1>;
+ };
+ cpu5@100000100 {
+ compatible = "arm,neoverse-n1";
+ reg = <0x1 0x00000100>;
+ device_type = "cpu";
+ enable-method = "psci";
+ numa-node-id = <1>;
+ };
+ cpu6@100010000 {
+ compatible = "arm,neoverse-n1";
+ reg = <0x1 0x00010000>;
+ device_type = "cpu";
+ enable-method = "psci";
+ numa-node-id = <1>;
+ };
+ cpu7@100010100 {
+ compatible = "arm,neoverse-n1";
+ reg = <0x1 0x00010100>;
+ device_type = "cpu";
+ enable-method = "psci";
+ numa-node-id = <1>;
+ };
+ };
+
+ /* Remote N1SDP board address is mapped at offset 4TB.
+ * First DRAM Bank of remote N1SDP board is mapped at 4TB + 2GB.
+ */
+ memory@40080000000 {
+ device_type = "memory";
+ reg = <0x00000400 0x80000000 0x0 0x80000000>,
+ <0x00000480 0x80000000 0x3 0x80000000>;
+ numa-node-id = <1>;
+ };
+
+ distance-map {
+ compatible = "numa-distance-map-v1";
+ distance-matrix = <0 0 10>,
+ <0 1 20>,
+ <1 1 10>;
+ };
+};
+
+&gic {
+ #redistributor-regions = <2>;
+ reg = <0x0 0x30000000 0 0x10000>, /* GICD */
+ <0x0 0x300c0000 0 0x80000>, /* GICR */
+ <0x400 0x300c0000 0 0x80000>; /* GICR */
+};
diff --git a/fdts/n1sdp-single-chip.dts b/fdts/n1sdp-single-chip.dts
new file mode 100644
index 0000000..bd48273
--- /dev/null
+++ b/fdts/n1sdp-single-chip.dts
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: (GPL-2.0 or BSD-3-Clause)
+/*
+ * Copyright (c) 2019-2020, Arm Limited.
+ */
+
+/dts-v1/;
+
+#include "n1sdp.dtsi"
+
+/ {
+ model = "Arm Neoverse N1 System Development Platform";
+ compatible = "arm,neoverse-n1-sdp", "arm,neoverse-n1-soc";
+
+ aliases {
+ serial0 = &soc_uart0;
+ };
+
+ chosen {
+ stdout-path = "soc_uart0:115200n8";
+ };
+
+ /* This configuration assumes that standard setup with two DIMM modules.
+ * In the first 2GB of DRAM bank the top 16MB are reserved by firmware as secure memory.
+ * This configuration assumes 16GB of total DRAM being populated.
+ */
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000 0x0 0x7f000000>,
+ <0x00000080 0x80000000 0x3 0x80000000>;
+ numa-node-id = <0>;
+ };
+
+ soc_refclk60mhz: refclk60mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <60000000>;
+ clock-output-names = "iofpga_clk";
+ };
+
+ soc_hdlcdclk: hdlcdclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <23750000>;
+ clock-output-names = "hdlcdclk";
+ };
+
+ hdlcd: hdlcd@1c050000 {
+ compatible = "arm,hdlcd";
+ reg = <0 0x1c050000 0 0x1000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_hdlcdclk>;
+ clock-names = "pxlclk";
+
+ port {
+ hdlcd0_output: endpoint {
+ remote-endpoint = <&tda998x_0_input>;
+ };
+ };
+ };
+
+ i2c@1c0f0000 {
+ compatible = "arm,versatile-i2c";
+ reg = <0x0 0x1c0f0000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ i2c-sda-hold-time-ns = <500>;
+ clocks = <&soc_refclk60mhz>;
+
+ hdmi-transmitter@70 {
+ compatible = "nxp,tda998x";
+ reg = <0x70>;
+ port {
+ tda998x_0_input: endpoint {
+ remote-endpoint = <&hdlcd0_output>;
+ };
+ };
+ };
+ };
+};
+
+&pcie_ctlr {
+ status = "okay";
+};
+
+&ccix_pcie_ctlr {
+ status = "okay";
+};
+
+&soc_uart0 {
+ status = "okay";
+};
diff --git a/fdts/n1sdp.dtsi b/fdts/n1sdp.dtsi
new file mode 100644
index 0000000..88f8734
--- /dev/null
+++ b/fdts/n1sdp.dtsi
@@ -0,0 +1,210 @@
+// SPDX-License-Identifier: (GPL-2.0 or BSD-3-Clause)
+/*
+ * Copyright (c) 2019-2020, Arm Limited.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu0@0 {
+ compatible = "arm,neoverse-n1";
+ reg = <0x0 0x0>;
+ device_type = "cpu";
+ enable-method = "psci";
+ numa-node-id = <0>;
+ };
+ cpu1@100 {
+ compatible = "arm,neoverse-n1";
+ reg = <0x0 0x100>;
+ device_type = "cpu";
+ enable-method = "psci";
+ numa-node-id = <0>;
+ };
+ cpu2@10000 {
+ compatible = "arm,neoverse-n1";
+ reg = <0x0 0x10000>;
+ device_type = "cpu";
+ enable-method = "psci";
+ numa-node-id = <0>;
+ };
+ cpu3@10100 {
+ compatible = "arm,neoverse-n1";
+ reg = <0x0 0x10100>;
+ device_type = "cpu";
+ enable-method = "psci";
+ numa-node-id = <0>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ spe-pmu {
+ compatible = "arm,statistical-profiling-extension-v1";
+ interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ soc_refclk100mhz: refclk100mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "apb_pclk";
+ };
+
+ soc_uartclk: uartclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ clock-output-names = "uartclk";
+ };
+
+ soc {
+ compatible = "arm,neoverse-n1-soc", "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gic: interrupt-controller@30000000 {
+ compatible = "arm,gic-v3";
+ #address-cells = <2>;
+ #interrupt-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ interrupt-controller;
+ reg = <0x0 0x30000000 0 0x10000>, /* GICD */
+ <0x0 0x300c0000 0 0x80000>; /* GICR */
+
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+ its1: its@30040000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x0 0x30040000 0x0 0x20000>;
+ };
+
+ its2: its@30060000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x0 0x30060000 0x0 0x20000>;
+ };
+
+ its_ccix: its@30080000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x0 0x30080000 0x0 0x20000>;
+ };
+
+ its_pcie: its@300a0000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x0 0x300a0000 0x0 0x20000>;
+ };
+ };
+
+ smmu_ccix: iommu@4f000000 {
+ compatible = "arm,smmu-v3";
+ reg = <0 0x4f000000 0 0x40000>;
+ interrupts = <GIC_SPI 228 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 229 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 230 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "eventq", "cmdq-sync", "gerror";
+ msi-parent = <&its1 0>;
+ #iommu-cells = <1>;
+ dma-coherent;
+ };
+
+ smmu_pcie: iommu@4f400000 {
+ compatible = "arm,smmu-v3";
+ reg = <0 0x4f400000 0 0x40000>;
+ interrupts = <GIC_SPI 235 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 237 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "eventq", "cmdq-sync", "gerror";
+ msi-parent = <&its2 0>;
+ #iommu-cells = <1>;
+ dma-coherent;
+ };
+
+ pcie_ctlr: pcie@70000000 {
+ compatible = "arm,n1sdp-pcie";
+ device_type = "pci";
+ reg = <0 0x70000000 0 0x1200000>;
+ bus-range = <0 17>;
+ linux,pci-domain = <0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ dma-coherent;
+ ranges = <0x01000000 0x00 0x00000000 0x00 0x75200000 0x00 0x00010000>,
+ <0x02000000 0x00 0x71200000 0x00 0x71200000 0x00 0x04000000>,
+ <0x42000000 0x09 0x00000000 0x09 0x00000000 0x20 0x00000000>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &gic 0 0 0 169 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &gic 0 0 0 170 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &gic 0 0 0 171 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &gic 0 0 0 172 IRQ_TYPE_LEVEL_HIGH>;
+ msi-map = <0 &its_pcie 0 0x10000>;
+ iommu-map = <0 &smmu_pcie 0 0x10000>;
+ status = "disabled";
+ };
+
+ ccix_pcie_ctlr: pcie@68000000 {
+ compatible = "arm,n1sdp-pcie";
+ device_type = "pci";
+ reg = <0 0x68000000 0 0x1200000>;
+ bus-range = <0 17>;
+ linux,pci-domain = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ dma-coherent;
+ ranges = <0x01000000 0x00 0x00000000 0x00 0x6d200000 0x00 0x00010000>,
+ <0x02000000 0x00 0x69200000 0x00 0x69200000 0x00 0x04000000>,
+ <0x42000000 0x29 0x00000000 0x29 0x00000000 0x20 0x00000000>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &gic 0 0 0 201 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &gic 0 0 0 202 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &gic 0 0 0 203 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &gic 0 0 0 204 IRQ_TYPE_LEVEL_HIGH>;
+ msi-map = <0 &its_ccix 0 0x10000>;
+ iommu-map = <0 &smmu_ccix 0 0x10000>;
+ status = "disabled";
+ };
+
+ soc_uart0: serial@2a400000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0x2a400000 0x0 0x1000>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_uartclk>, <&soc_refclk100mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+ };
+};
diff --git a/plat/arm/board/n1sdp/platform.mk b/plat/arm/board/n1sdp/platform.mk
index 0bd3a21..4b621e3 100644
--- a/plat/arm/board/n1sdp/platform.mk
+++ b/plat/arm/board/n1sdp/platform.mk
@@ -38,6 +38,8 @@
${N1SDP_BASE}/n1sdp_security.c \
drivers/arm/css/sds/sds.c
+FDT_SOURCES += fdts/${PLAT}-single-chip.dts \
+ fdts/${PLAT}-multi-chip.dts
# TF-A not required to load the SCP Images
override CSS_LOAD_SCP_IMAGES := 0