diff --git a/services/spd/opteed/opteed.mk b/services/spd/opteed/opteed.mk
new file mode 100644
index 0000000..8057dcc
--- /dev/null
+++ b/services/spd/opteed/opteed.mk
@@ -0,0 +1,39 @@
+#
+# Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# Redistributions of source code must retain the above copyright notice, this
+# list of conditions and the following disclaimer.
+#
+# Redistributions in binary form must reproduce the above copyright notice,
+# this list of conditions and the following disclaimer in the documentation
+# and/or other materials provided with the distribution.
+#
+# Neither the name of ARM nor the names of its contributors may be used
+# to endorse or promote products derived from this software without specific
+# prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+OPTEED_DIR		:=	services/spd/opteed
+SPD_INCLUDES		:=
+
+SPD_SOURCES		:=	services/spd/opteed/opteed_common.c	\
+				services/spd/opteed/opteed_helpers.S	\
+				services/spd/opteed/opteed_main.c	\
+				services/spd/opteed/opteed_pm.c
+
+NEED_BL32		:=	yes
diff --git a/services/spd/opteed/opteed_common.c b/services/spd/opteed/opteed_common.c
new file mode 100644
index 0000000..2f20b7c
--- /dev/null
+++ b/services/spd/opteed/opteed_common.c
@@ -0,0 +1,128 @@
+/*
+ * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <arch_helpers.h>
+#include <assert.h>
+#include <bl_common.h>
+#include <context_mgmt.h>
+#include <string.h>
+#include "opteed_private.h"
+
+/*******************************************************************************
+ * Given a OPTEE entrypoint info pointer, entry point PC, register width,
+ * cpu id & pointer to a context data structure, this function will
+ * initialize OPTEE context and entry point info for OPTEE.
+ ******************************************************************************/
+void opteed_init_optee_ep_state(struct entry_point_info *optee_entry_point,
+				uint32_t rw, uint64_t pc,
+				optee_context_t *optee_ctx)
+{
+	uint32_t ep_attr;
+
+	/* Passing a NULL context is a critical programming error */
+	assert(optee_ctx);
+	assert(optee_entry_point);
+	assert(pc);
+
+	/* Associate this context with the cpu specified */
+	optee_ctx->mpidr = read_mpidr_el1();
+	optee_ctx->state = 0;
+	set_optee_pstate(optee_ctx->state, OPTEE_PSTATE_OFF);
+
+	cm_set_context(&optee_ctx->cpu_ctx, SECURE);
+
+	/* initialise an entrypoint to set up the CPU context */
+	ep_attr = SECURE | EP_ST_ENABLE;
+	if (read_sctlr_el3() & SCTLR_EE_BIT)
+		ep_attr |= EP_EE_BIG;
+	SET_PARAM_HEAD(optee_entry_point, PARAM_EP, VERSION_1, ep_attr);
+	optee_entry_point->pc = pc;
+	if (rw == OPTEE_AARCH64)
+		optee_entry_point->spsr = SPSR_64(MODE_EL1, MODE_SP_ELX,
+						  DISABLE_ALL_EXCEPTIONS);
+	else
+		optee_entry_point->spsr = SPSR_MODE32(MODE32_svc, SPSR_T_ARM,
+						      SPSR_E_LITTLE,
+						      DAIF_FIQ_BIT |
+							DAIF_IRQ_BIT |
+							DAIF_ABT_BIT);
+	memset(&optee_entry_point->args, 0, sizeof(optee_entry_point->args));
+}
+
+/*******************************************************************************
+ * This function takes an OPTEE context pointer and:
+ * 1. Applies the S-EL1 system register context from optee_ctx->cpu_ctx.
+ * 2. Saves the current C runtime state (callee saved registers) on the stack
+ *    frame and saves a reference to this state.
+ * 3. Calls el3_exit() so that the EL3 system and general purpose registers
+ *    from the optee_ctx->cpu_ctx are used to enter the OPTEE image.
+ ******************************************************************************/
+uint64_t opteed_synchronous_sp_entry(optee_context_t *optee_ctx)
+{
+	uint64_t rc;
+
+	assert(optee_ctx != NULL);
+	assert(optee_ctx->c_rt_ctx == 0);
+
+	/* Apply the Secure EL1 system register context and switch to it */
+	assert(cm_get_context(SECURE) == &optee_ctx->cpu_ctx);
+	cm_el1_sysregs_context_restore(SECURE);
+	cm_set_next_eret_context(SECURE);
+
+	rc = opteed_enter_sp(&optee_ctx->c_rt_ctx);
+#if DEBUG
+	optee_ctx->c_rt_ctx = 0;
+#endif
+
+	return rc;
+}
+
+
+/*******************************************************************************
+ * This function takes an OPTEE context pointer and:
+ * 1. Saves the S-EL1 system register context tp optee_ctx->cpu_ctx.
+ * 2. Restores the current C runtime state (callee saved registers) from the
+ *    stack frame using the reference to this state saved in opteed_enter_sp().
+ * 3. It does not need to save any general purpose or EL3 system register state
+ *    as the generic smc entry routine should have saved those.
+ ******************************************************************************/
+void opteed_synchronous_sp_exit(optee_context_t *optee_ctx, uint64_t ret)
+{
+	assert(optee_ctx != NULL);
+	/* Save the Secure EL1 system register context */
+	assert(cm_get_context(SECURE) == &optee_ctx->cpu_ctx);
+	cm_el1_sysregs_context_save(SECURE);
+
+	assert(optee_ctx->c_rt_ctx != 0);
+	opteed_exit_sp(optee_ctx->c_rt_ctx, ret);
+
+	/* Should never reach here */
+	assert(0);
+}
diff --git a/services/spd/opteed/opteed_helpers.S b/services/spd/opteed/opteed_helpers.S
new file mode 100644
index 0000000..ef59540
--- /dev/null
+++ b/services/spd/opteed/opteed_helpers.S
@@ -0,0 +1,101 @@
+/*
+ * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <asm_macros.S>
+#include "opteed_private.h"
+
+	.global	opteed_enter_sp
+	/* ---------------------------------------------
+	 * This function is called with SP_EL0 as stack.
+	 * Here we stash our EL3 callee-saved registers
+	 * on to the stack as a part of saving the C
+	 * runtime and enter the secure payload.
+	 * 'x0' contains a pointer to the memory where
+	 * the address of the C runtime context is to be
+	 * saved.
+	 * ---------------------------------------------
+	 */
+func opteed_enter_sp
+	/* Make space for the registers that we're going to save */
+	mov	x3, sp
+	str	x3, [x0, #0]
+	sub	sp, sp, #OPTEED_C_RT_CTX_SIZE
+
+	/* Save callee-saved registers on to the stack */
+	stp	x19, x20, [sp, #OPTEED_C_RT_CTX_X19]
+	stp	x21, x22, [sp, #OPTEED_C_RT_CTX_X21]
+	stp	x23, x24, [sp, #OPTEED_C_RT_CTX_X23]
+	stp	x25, x26, [sp, #OPTEED_C_RT_CTX_X25]
+	stp	x27, x28, [sp, #OPTEED_C_RT_CTX_X27]
+	stp	x29, x30, [sp, #OPTEED_C_RT_CTX_X29]
+
+	/* ---------------------------------------------
+	 * Everything is setup now. el3_exit() will
+	 * use the secure context to restore to the
+	 * general purpose and EL3 system registers to
+	 * ERET into OPTEE.
+	 * ---------------------------------------------
+	 */
+	b	el3_exit
+
+	/* ---------------------------------------------
+	 * This function is called 'x0' pointing to a C
+	 * runtime context saved in opteed_enter_sp().  It
+	 * restores the saved registers and jumps to
+	 * that runtime with 'x0' as the new sp. This
+	 * destroys the C runtime context that had been
+	 * built on the stack below the saved context by
+	 * the caller. Later the second parameter 'x1'
+	 * is passed as return value to the caller
+	 * ---------------------------------------------
+	 */
+	.global opteed_exit_sp
+func opteed_exit_sp
+	/* Restore the previous stack */
+	mov	sp, x0
+
+	/* Restore callee-saved registers on to the stack */
+	ldp	x19, x20, [x0, #(OPTEED_C_RT_CTX_X19 - OPTEED_C_RT_CTX_SIZE)]
+	ldp	x21, x22, [x0, #(OPTEED_C_RT_CTX_X21 - OPTEED_C_RT_CTX_SIZE)]
+	ldp	x23, x24, [x0, #(OPTEED_C_RT_CTX_X23 - OPTEED_C_RT_CTX_SIZE)]
+	ldp	x25, x26, [x0, #(OPTEED_C_RT_CTX_X25 - OPTEED_C_RT_CTX_SIZE)]
+	ldp	x27, x28, [x0, #(OPTEED_C_RT_CTX_X27 - OPTEED_C_RT_CTX_SIZE)]
+	ldp	x29, x30, [x0, #(OPTEED_C_RT_CTX_X29 - OPTEED_C_RT_CTX_SIZE)]
+
+	/* ---------------------------------------------
+	 * This should take us back to the instruction
+	 * after the call to the last opteed_enter_sp().
+	 * Place the second parameter to x0 so that the
+	 * caller will see it as a return value from the
+	 * original entry call
+	 * ---------------------------------------------
+	 */
+	mov	x0, x1
+	ret
diff --git a/services/spd/opteed/opteed_main.c b/services/spd/opteed/opteed_main.c
new file mode 100644
index 0000000..5c5144f
--- /dev/null
+++ b/services/spd/opteed/opteed_main.c
@@ -0,0 +1,435 @@
+/*
+ * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+
+/*******************************************************************************
+ * This is the Secure Payload Dispatcher (SPD). The dispatcher is meant to be a
+ * plug-in component to the Secure Monitor, registered as a runtime service. The
+ * SPD is expected to be a functional extension of the Secure Payload (SP) that
+ * executes in Secure EL1. The Secure Monitor will delegate all SMCs targeting
+ * the Trusted OS/Applications range to the dispatcher. The SPD will either
+ * handle the request locally or delegate it to the Secure Payload. It is also
+ * responsible for initialising and maintaining communication with the SP.
+ ******************************************************************************/
+#include <arch_helpers.h>
+#include <assert.h>
+#include <bl_common.h>
+#include <bl31.h>
+#include <context_mgmt.h>
+#include <debug.h>
+#include <errno.h>
+#include <platform.h>
+#include <runtime_svc.h>
+#include <stddef.h>
+#include <uuid.h>
+#include "opteed_private.h"
+#include "teesmc_opteed_macros.h"
+#include "teesmc_opteed.h"
+
+/*******************************************************************************
+ * Address of the entrypoint vector table in OPTEE. It is
+ * initialised once on the primary core after a cold boot.
+ ******************************************************************************/
+optee_vectors_t *optee_vectors;
+
+/*******************************************************************************
+ * Array to keep track of per-cpu OPTEE state
+ ******************************************************************************/
+optee_context_t opteed_sp_context[OPTEED_CORE_COUNT];
+uint32_t opteed_rw;
+
+
+
+static int32_t opteed_init(void);
+
+/*******************************************************************************
+ * This function is the handler registered for S-EL1 interrupts by the
+ * OPTEED. It validates the interrupt and upon success arranges entry into
+ * the OPTEE at 'optee_fiq_entry()' for handling the interrupt.
+ ******************************************************************************/
+static uint64_t opteed_sel1_interrupt_handler(uint32_t id,
+					    uint32_t flags,
+					    void *handle,
+					    void *cookie)
+{
+	uint32_t linear_id;
+	uint64_t mpidr;
+	optee_context_t *optee_ctx;
+
+	/* Check the security state when the exception was generated */
+	assert(get_interrupt_src_ss(flags) == NON_SECURE);
+
+#if IMF_READ_INTERRUPT_ID
+	/* Check the security status of the interrupt */
+	assert(plat_ic_get_interrupt_type(id) == INTR_TYPE_S_EL1);
+#endif
+
+	/* Sanity check the pointer to this cpu's context */
+	mpidr = read_mpidr();
+	assert(handle == cm_get_context(NON_SECURE));
+
+	/* Save the non-secure context before entering the OPTEE */
+	cm_el1_sysregs_context_save(NON_SECURE);
+
+	/* Get a reference to this cpu's OPTEE context */
+	linear_id = platform_get_core_pos(mpidr);
+	optee_ctx = &opteed_sp_context[linear_id];
+	assert(&optee_ctx->cpu_ctx == cm_get_context(SECURE));
+
+	cm_set_elr_el3(SECURE, (uint64_t)&optee_vectors->fiq_entry);
+	cm_el1_sysregs_context_restore(SECURE);
+	cm_set_next_eret_context(SECURE);
+
+	/*
+	 * Tell the OPTEE that it has to handle an FIQ (synchronously).
+	 * Also the instruction in normal world where the interrupt was
+	 * generated is passed for debugging purposes. It is safe to
+	 * retrieve this address from ELR_EL3 as the secure context will
+	 * not take effect until el3_exit().
+	 */
+	SMC_RET1(&optee_ctx->cpu_ctx, read_elr_el3());
+}
+
+/*******************************************************************************
+ * OPTEE Dispatcher setup. The OPTEED finds out the OPTEE entrypoint and type
+ * (aarch32/aarch64) if not already known and initialises the context for entry
+ * into OPTEE for its initialization.
+ ******************************************************************************/
+int32_t opteed_setup(void)
+{
+	entry_point_info_t *optee_ep_info;
+	uint64_t mpidr = read_mpidr();
+	uint32_t linear_id;
+
+	linear_id = platform_get_core_pos(mpidr);
+
+	/*
+	 * Get information about the Secure Payload (BL32) image. Its
+	 * absence is a critical failure.  TODO: Add support to
+	 * conditionally include the SPD service
+	 */
+	optee_ep_info = bl31_plat_get_next_image_ep_info(SECURE);
+	if (!optee_ep_info) {
+		WARN("No OPTEE provided by BL2 boot loader, Booting device"
+			" without OPTEE initialization. SMC`s destined for OPTEE"
+			" will return SMC_UNK\n");
+		return 1;
+	}
+
+	/*
+	 * If there's no valid entry point for SP, we return a non-zero value
+	 * signalling failure initializing the service. We bail out without
+	 * registering any handlers
+	 */
+	if (!optee_ep_info->pc)
+		return 1;
+
+	/*
+	 * We could inspect the SP image and determine it's execution
+	 * state i.e whether AArch32 or AArch64. Assuming it's AArch32
+	 * for the time being.
+	 */
+	opteed_rw = OPTEE_AARCH32;
+	opteed_init_optee_ep_state(optee_ep_info,
+				opteed_rw,
+				optee_ep_info->pc,
+				&opteed_sp_context[linear_id]);
+
+	/*
+	 * All OPTEED initialization done. Now register our init function with
+	 * BL31 for deferred invocation
+	 */
+	bl31_register_bl32_init(&opteed_init);
+
+	return 0;
+}
+
+/*******************************************************************************
+ * This function passes control to the OPTEE image (BL32) for the first time
+ * on the primary cpu after a cold boot. It assumes that a valid secure
+ * context has already been created by opteed_setup() which can be directly
+ * used.  It also assumes that a valid non-secure context has been
+ * initialised by PSCI so it does not need to save and restore any
+ * non-secure state. This function performs a synchronous entry into
+ * OPTEE. OPTEE passes control back to this routine through a SMC.
+ ******************************************************************************/
+static int32_t opteed_init(void)
+{
+	uint64_t mpidr = read_mpidr();
+	uint32_t linear_id = platform_get_core_pos(mpidr);
+	optee_context_t *optee_ctx = &opteed_sp_context[linear_id];
+	entry_point_info_t *optee_entry_point;
+	uint64_t rc;
+
+	/*
+	 * Get information about the OPTEE (BL32) image. Its
+	 * absence is a critical failure.
+	 */
+	optee_entry_point = bl31_plat_get_next_image_ep_info(SECURE);
+	assert(optee_entry_point);
+
+	cm_init_context(mpidr, optee_entry_point);
+
+	/*
+	 * Arrange for an entry into OPTEE. It will be returned via
+	 * OPTEE_ENTRY_DONE case
+	 */
+	rc = opteed_synchronous_sp_entry(optee_ctx);
+	assert(rc != 0);
+
+	return rc;
+}
+
+
+/*******************************************************************************
+ * This function is responsible for handling all SMCs in the Trusted OS/App
+ * range from the non-secure state as defined in the SMC Calling Convention
+ * Document. It is also responsible for communicating with the Secure
+ * payload to delegate work and return results back to the non-secure
+ * state. Lastly it will also return any information that OPTEE needs to do
+ * the work assigned to it.
+ ******************************************************************************/
+uint64_t opteed_smc_handler(uint32_t smc_fid,
+			 uint64_t x1,
+			 uint64_t x2,
+			 uint64_t x3,
+			 uint64_t x4,
+			 void *cookie,
+			 void *handle,
+			 uint64_t flags)
+{
+	cpu_context_t *ns_cpu_context;
+	unsigned long mpidr = read_mpidr();
+	uint32_t linear_id = platform_get_core_pos(mpidr);
+	optee_context_t *optee_ctx = &opteed_sp_context[linear_id];
+	uint64_t rc;
+
+	/*
+	 * Determine which security state this SMC originated from
+	 */
+
+	if (is_caller_non_secure(flags)) {
+		/*
+		 * This is a fresh request from the non-secure client.
+		 * The parameters are in x1 and x2. Figure out which
+		 * registers need to be preserved, save the non-secure
+		 * state and send the request to the secure payload.
+		 */
+		assert(handle == cm_get_context(NON_SECURE));
+
+		cm_el1_sysregs_context_save(NON_SECURE);
+
+		/*
+		 * We are done stashing the non-secure context. Ask the
+		 * OPTEE to do the work now.
+		 */
+
+		/*
+		 * Verify if there is a valid context to use, copy the
+		 * operation type and parameters to the secure context
+		 * and jump to the fast smc entry point in the secure
+		 * payload. Entry into S-EL1 will take place upon exit
+		 * from this function.
+		 */
+		assert(&optee_ctx->cpu_ctx == cm_get_context(SECURE));
+
+		/* Set appropriate entry for SMC.
+		 * We expect OPTEE to manage the PSTATE.I and PSTATE.F
+		 * flags as appropriate.
+		 */
+		if (GET_SMC_TYPE(smc_fid) == SMC_TYPE_FAST) {
+			cm_set_elr_el3(SECURE, (uint64_t)
+					&optee_vectors->fast_smc_entry);
+		} else {
+			cm_set_elr_el3(SECURE, (uint64_t)
+					&optee_vectors->std_smc_entry);
+		}
+
+		cm_el1_sysregs_context_restore(SECURE);
+		cm_set_next_eret_context(SECURE);
+
+		/* Propagate hypervisor client ID */
+		write_ctx_reg(get_gpregs_ctx(&optee_ctx->cpu_ctx),
+			      CTX_GPREG_X7,
+			      read_ctx_reg(get_gpregs_ctx(handle),
+					   CTX_GPREG_X7));
+
+		SMC_RET4(&optee_ctx->cpu_ctx, smc_fid, x1, x2, x3);
+	}
+
+	/*
+	 * Returning from OPTEE
+	 */
+
+	switch (smc_fid) {
+	/*
+	 * OPTEE has finished initialising itself after a cold boot
+	 */
+	case TEESMC_OPTEED_RETURN_ENTRY_DONE:
+		/*
+		 * Stash the OPTEE entry points information. This is done
+		 * only once on the primary cpu
+		 */
+		assert(optee_vectors == NULL);
+		optee_vectors = (optee_vectors_t *) x1;
+
+		if (optee_vectors) {
+			set_optee_pstate(optee_ctx->state, OPTEE_PSTATE_ON);
+
+			/*
+			 * OPTEE has been successfully initialized.
+			 * Register power management hooks with PSCI
+			 */
+			psci_register_spd_pm_hook(&opteed_pm);
+
+			/*
+			 * Register an interrupt handler for S-EL1 interrupts
+			 * when generated during code executing in the
+			 * non-secure state.
+			 */
+			flags = 0;
+			set_interrupt_rm_flag(flags, NON_SECURE);
+			rc = register_interrupt_type_handler(INTR_TYPE_S_EL1,
+						opteed_sel1_interrupt_handler,
+						flags);
+			if (rc)
+				panic();
+		}
+
+		/*
+		 * OPTEE reports completion. The OPTEED must have initiated
+		 * the original request through a synchronous entry into
+		 * OPTEE. Jump back to the original C runtime context.
+		 */
+		opteed_synchronous_sp_exit(optee_ctx, x1);
+
+
+	/*
+	 * These function IDs is used only by OP-TEE to indicate it has
+	 * finished:
+	 * 1. turning itself on in response to an earlier psci
+	 *    cpu_on request
+	 * 2. resuming itself after an earlier psci cpu_suspend
+	 *    request.
+	 */
+	case TEESMC_OPTEED_RETURN_ON_DONE:
+	case TEESMC_OPTEED_RETURN_RESUME_DONE:
+
+
+	/*
+	 * These function IDs is used only by the SP to indicate it has
+	 * finished:
+	 * 1. suspending itself after an earlier psci cpu_suspend
+	 *    request.
+	 * 2. turning itself off in response to an earlier psci
+	 *    cpu_off request.
+	 */
+	case TEESMC_OPTEED_RETURN_OFF_DONE:
+	case TEESMC_OPTEED_RETURN_SUSPEND_DONE:
+	case TEESMC_OPTEED_RETURN_SYSTEM_OFF_DONE:
+	case TEESMC_OPTEED_RETURN_SYSTEM_RESET_DONE:
+
+		/*
+		 * OPTEE reports completion. The OPTEED must have initiated the
+		 * original request through a synchronous entry into OPTEE.
+		 * Jump back to the original C runtime context, and pass x1 as
+		 * return value to the caller
+		 */
+		opteed_synchronous_sp_exit(optee_ctx, x1);
+
+	/*
+	 * OPTEE is returning from a call or being preempted from a call, in
+	 * either case execution should resume in the normal world.
+	 */
+	case TEESMC_OPTEED_RETURN_CALL_DONE:
+		/*
+		 * This is the result from the secure client of an
+		 * earlier request. The results are in x0-x3. Copy it
+		 * into the non-secure context, save the secure state
+		 * and return to the non-secure state.
+		 */
+		assert(handle == cm_get_context(SECURE));
+		cm_el1_sysregs_context_save(SECURE);
+
+		/* Get a reference to the non-secure context */
+		ns_cpu_context = cm_get_context(NON_SECURE);
+		assert(ns_cpu_context);
+
+		/* Restore non-secure state */
+		cm_el1_sysregs_context_restore(NON_SECURE);
+		cm_set_next_eret_context(NON_SECURE);
+
+		SMC_RET4(ns_cpu_context, x1, x2, x3, x4);
+
+	/*
+	 * OPTEE has finished handling a S-EL1 FIQ interrupt. Execution
+	 * should resume in the normal world.
+	 */
+	case TEESMC_OPTEED_RETURN_FIQ_DONE:
+		/* Get a reference to the non-secure context */
+		ns_cpu_context = cm_get_context(NON_SECURE);
+		assert(ns_cpu_context);
+
+		/*
+		 * Restore non-secure state. There is no need to save the
+		 * secure system register context since OPTEE was supposed
+		 * to preserve it during S-EL1 interrupt handling.
+		 */
+		cm_el1_sysregs_context_restore(NON_SECURE);
+		cm_set_next_eret_context(NON_SECURE);
+
+		SMC_RET0((uint64_t) ns_cpu_context);
+
+	default:
+		panic();
+	}
+}
+
+/* Define an OPTEED runtime service descriptor for fast SMC calls */
+DECLARE_RT_SVC(
+	opteed_fast,
+
+	OEN_TOS_START,
+	OEN_TOS_END,
+	SMC_TYPE_FAST,
+	opteed_setup,
+	opteed_smc_handler
+);
+
+/* Define an OPTEED runtime service descriptor for standard SMC calls */
+DECLARE_RT_SVC(
+	opteed_std,
+
+	OEN_TOS_START,
+	OEN_TOS_END,
+	SMC_TYPE_STD,
+	NULL,
+	opteed_smc_handler
+);
diff --git a/services/spd/opteed/opteed_pm.c b/services/spd/opteed/opteed_pm.c
new file mode 100644
index 0000000..552d7a0
--- /dev/null
+++ b/services/spd/opteed/opteed_pm.c
@@ -0,0 +1,252 @@
+/*
+ * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <arch_helpers.h>
+#include <assert.h>
+#include <bl_common.h>
+#include <context_mgmt.h>
+#include <debug.h>
+#include <platform.h>
+#include "opteed_private.h"
+
+/*******************************************************************************
+ * The target cpu is being turned on. Allow the OPTEED/OPTEE to perform any
+ * actions needed. Nothing at the moment.
+ ******************************************************************************/
+static void opteed_cpu_on_handler(uint64_t target_cpu)
+{
+}
+
+/*******************************************************************************
+ * This cpu is being turned off. Allow the OPTEED/OPTEE to perform any actions
+ * needed
+ ******************************************************************************/
+static int32_t opteed_cpu_off_handler(uint64_t cookie)
+{
+	int32_t rc = 0;
+	uint64_t mpidr = read_mpidr();
+	uint32_t linear_id = platform_get_core_pos(mpidr);
+	optee_context_t *optee_ctx = &opteed_sp_context[linear_id];
+
+	assert(optee_vectors);
+	assert(get_optee_pstate(optee_ctx->state) == OPTEE_PSTATE_ON);
+
+	/* Program the entry point and enter OPTEE */
+	cm_set_elr_el3(SECURE, (uint64_t) &optee_vectors->cpu_off_entry);
+	rc = opteed_synchronous_sp_entry(optee_ctx);
+
+	/*
+	 * Read the response from OPTEE. A non-zero return means that
+	 * something went wrong while communicating with OPTEE.
+	 */
+	if (rc != 0)
+		panic();
+
+	/*
+	 * Reset OPTEE's context for a fresh start when this cpu is turned on
+	 * subsequently.
+	 */
+	set_optee_pstate(optee_ctx->state, OPTEE_PSTATE_OFF);
+
+	 return 0;
+}
+
+/*******************************************************************************
+ * This cpu is being suspended. S-EL1 state must have been saved in the
+ * resident cpu (mpidr format) if it is a UP/UP migratable OPTEE.
+ ******************************************************************************/
+static void opteed_cpu_suspend_handler(uint64_t power_state)
+{
+	int32_t rc = 0;
+	uint64_t mpidr = read_mpidr();
+	uint32_t linear_id = platform_get_core_pos(mpidr);
+	optee_context_t *optee_ctx = &opteed_sp_context[linear_id];
+
+	assert(optee_vectors);
+	assert(get_optee_pstate(optee_ctx->state) == OPTEE_PSTATE_ON);
+
+	/* Program the entry point, power_state parameter and enter OPTEE */
+	write_ctx_reg(get_gpregs_ctx(&optee_ctx->cpu_ctx),
+		      CTX_GPREG_X0,
+		      power_state);
+	cm_set_elr_el3(SECURE, (uint64_t) &optee_vectors->cpu_suspend_entry);
+	rc = opteed_synchronous_sp_entry(optee_ctx);
+
+	/*
+	 * Read the response from OPTEE. A non-zero return means that
+	 * something went wrong while communicating with OPTEE.
+	 */
+	if (rc != 0)
+		panic();
+
+	/* Update its context to reflect the state OPTEE is in */
+	set_optee_pstate(optee_ctx->state, OPTEE_PSTATE_SUSPEND);
+}
+
+/*******************************************************************************
+ * This cpu has been turned on. Enter OPTEE to initialise S-EL1 and other bits
+ * before passing control back to the Secure Monitor. Entry in S-El1 is done
+ * after initialising minimal architectural state that guarantees safe
+ * execution.
+ ******************************************************************************/
+static void opteed_cpu_on_finish_handler(uint64_t cookie)
+{
+	int32_t rc = 0;
+	uint64_t mpidr = read_mpidr();
+	uint32_t linear_id = platform_get_core_pos(mpidr);
+	optee_context_t *optee_ctx = &opteed_sp_context[linear_id];
+	entry_point_info_t optee_on_entrypoint;
+
+	assert(optee_vectors);
+	assert(get_optee_pstate(optee_ctx->state) == OPTEE_PSTATE_OFF);
+
+	opteed_init_optee_ep_state(&optee_on_entrypoint, opteed_rw,
+				(uint64_t)&optee_vectors->cpu_on_entry,
+				optee_ctx);
+
+	/* Initialise this cpu's secure context */
+	cm_init_context(mpidr, &optee_on_entrypoint);
+
+	/* Enter OPTEE */
+	rc = opteed_synchronous_sp_entry(optee_ctx);
+
+	/*
+	 * Read the response from OPTEE. A non-zero return means that
+	 * something went wrong while communicating with OPTEE.
+	 */
+	if (rc != 0)
+		panic();
+
+	/* Update its context to reflect the state OPTEE is in */
+	set_optee_pstate(optee_ctx->state, OPTEE_PSTATE_ON);
+}
+
+/*******************************************************************************
+ * This cpu has resumed from suspend. The OPTEED saved the OPTEE context when it
+ * completed the preceding suspend call. Use that context to program an entry
+ * into OPTEE to allow it to do any remaining book keeping
+ ******************************************************************************/
+static void opteed_cpu_suspend_finish_handler(uint64_t suspend_level)
+{
+	int32_t rc = 0;
+	uint64_t mpidr = read_mpidr();
+	uint32_t linear_id = platform_get_core_pos(mpidr);
+	optee_context_t *optee_ctx = &opteed_sp_context[linear_id];
+
+	assert(optee_vectors);
+	assert(get_optee_pstate(optee_ctx->state) == OPTEE_PSTATE_SUSPEND);
+
+	/* Program the entry point, suspend_level and enter the SP */
+	write_ctx_reg(get_gpregs_ctx(&optee_ctx->cpu_ctx),
+		      CTX_GPREG_X0,
+		      suspend_level);
+	cm_set_elr_el3(SECURE, (uint64_t) &optee_vectors->cpu_resume_entry);
+	rc = opteed_synchronous_sp_entry(optee_ctx);
+
+	/*
+	 * Read the response from OPTEE. A non-zero return means that
+	 * something went wrong while communicating with OPTEE.
+	 */
+	if (rc != 0)
+		panic();
+
+	/* Update its context to reflect the state OPTEE is in */
+	set_optee_pstate(optee_ctx->state, OPTEE_PSTATE_ON);
+}
+
+/*******************************************************************************
+ * Return the type of OPTEE the OPTEED is dealing with. Report the current
+ * resident cpu (mpidr format) if it is a UP/UP migratable OPTEE.
+ ******************************************************************************/
+static int32_t opteed_cpu_migrate_info(uint64_t *resident_cpu)
+{
+	return OPTEE_MIGRATE_INFO;
+}
+
+/*******************************************************************************
+ * System is about to be switched off. Allow the OPTEED/OPTEE to perform
+ * any actions needed.
+ ******************************************************************************/
+static void opteed_system_off(void)
+{
+	uint64_t mpidr = read_mpidr();
+	uint32_t linear_id = platform_get_core_pos(mpidr);
+	optee_context_t *optee_ctx = &opteed_sp_context[linear_id];
+
+	assert(optee_vectors);
+	assert(get_optee_pstate(optee_ctx->state) == OPTEE_PSTATE_ON);
+
+	/* Program the entry point */
+	cm_set_elr_el3(SECURE, (uint64_t) &optee_vectors->system_off_entry);
+
+	/* Enter OPTEE. We do not care about the return value because we
+	 * must continue the shutdown anyway */
+	opteed_synchronous_sp_entry(optee_ctx);
+}
+
+/*******************************************************************************
+ * System is about to be reset. Allow the OPTEED/OPTEE to perform
+ * any actions needed.
+ ******************************************************************************/
+static void opteed_system_reset(void)
+{
+	uint64_t mpidr = read_mpidr();
+	uint32_t linear_id = platform_get_core_pos(mpidr);
+	optee_context_t *optee_ctx = &opteed_sp_context[linear_id];
+
+	assert(optee_vectors);
+	assert(get_optee_pstate(optee_ctx->state) == OPTEE_PSTATE_ON);
+
+	/* Program the entry point */
+	cm_set_elr_el3(SECURE, (uint64_t) &optee_vectors->system_reset_entry);
+
+	/* Enter OPTEE. We do not care about the return value because we
+	 * must continue the reset anyway */
+	opteed_synchronous_sp_entry(optee_ctx);
+}
+
+
+/*******************************************************************************
+ * Structure populated by the OPTEE Dispatcher to be given a chance to
+ * perform any OPTEE bookkeeping before PSCI executes a power mgmt.
+ * operation.
+ ******************************************************************************/
+const spd_pm_ops_t opteed_pm = {
+	.svc_on = opteed_cpu_on_handler,
+	.svc_off = opteed_cpu_off_handler,
+	.svc_suspend = opteed_cpu_suspend_handler,
+	.svc_on_finish = opteed_cpu_on_finish_handler,
+	.svc_suspend_finish = opteed_cpu_suspend_finish_handler,
+	.svc_migrate = NULL,
+	.svc_migrate_info = opteed_cpu_migrate_info,
+	.svc_system_off = opteed_system_off,
+	.svc_system_reset = opteed_system_reset,
+};
+
diff --git a/services/spd/opteed/opteed_private.h b/services/spd/opteed/opteed_private.h
new file mode 100644
index 0000000..357c2ec
--- /dev/null
+++ b/services/spd/opteed/opteed_private.h
@@ -0,0 +1,181 @@
+/*
+ * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __OPTEED_PRIVATE_H__
+#define __OPTEED_PRIVATE_H__
+
+#include <arch.h>
+#include <context.h>
+#include <interrupt_mgmt.h>
+#include <platform_def.h>
+#include <psci.h>
+
+/*******************************************************************************
+ * OPTEE PM state information e.g. OPTEE is suspended, uninitialised etc
+ * and macros to access the state information in the per-cpu 'state' flags
+ ******************************************************************************/
+#define OPTEE_PSTATE_OFF		0
+#define OPTEE_PSTATE_ON			1
+#define OPTEE_PSTATE_SUSPEND		2
+#define OPTEE_PSTATE_SHIFT		0
+#define OPTEE_PSTATE_MASK		0x3
+#define get_optee_pstate(state)	((state >> OPTEE_PSTATE_SHIFT) & \
+				 OPTEE_PSTATE_MASK)
+#define clr_optee_pstate(state)	(state &= ~(OPTEE_PSTATE_MASK \
+					    << OPTEE_PSTATE_SHIFT))
+#define set_optee_pstate(st, pst) do {					       \
+					clr_optee_pstate(st);		       \
+					st |= (pst & OPTEE_PSTATE_MASK) <<     \
+						OPTEE_PSTATE_SHIFT;	       \
+				} while (0)
+
+
+/*******************************************************************************
+ * OPTEE execution state information i.e. aarch32 or aarch64
+ ******************************************************************************/
+#define OPTEE_AARCH32		MODE_RW_32
+#define OPTEE_AARCH64		MODE_RW_64
+
+/*******************************************************************************
+ * The OPTEED should know the type of OPTEE
+ ******************************************************************************/
+#define OPTEE_TYPE_UP		PSCI_TOS_NOT_UP_MIG_CAP
+#define OPTEE_TYPE_UPM		PSCI_TOS_UP_MIG_CAP
+#define OPTEE_TYPE_MP		PSCI_TOS_NOT_PRESENT_MP
+
+/*******************************************************************************
+ * OPTEE migrate type information as known to the OPTEED. We assume that
+ * the OPTEED is dealing with an MP Secure Payload.
+ ******************************************************************************/
+#define OPTEE_MIGRATE_INFO		OPTEE_TYPE_MP
+
+/*******************************************************************************
+ * Number of cpus that the present on this platform. TODO: Rely on a topology
+ * tree to determine this in the future to avoid assumptions about mpidr
+ * allocation
+ ******************************************************************************/
+#define OPTEED_CORE_COUNT		PLATFORM_CORE_COUNT
+
+/*******************************************************************************
+ * Constants that allow assembler code to preserve callee-saved registers of the
+ * C runtime context while performing a security state switch.
+ ******************************************************************************/
+#define OPTEED_C_RT_CTX_X19		0x0
+#define OPTEED_C_RT_CTX_X20		0x8
+#define OPTEED_C_RT_CTX_X21		0x10
+#define OPTEED_C_RT_CTX_X22		0x18
+#define OPTEED_C_RT_CTX_X23		0x20
+#define OPTEED_C_RT_CTX_X24		0x28
+#define OPTEED_C_RT_CTX_X25		0x30
+#define OPTEED_C_RT_CTX_X26		0x38
+#define OPTEED_C_RT_CTX_X27		0x40
+#define OPTEED_C_RT_CTX_X28		0x48
+#define OPTEED_C_RT_CTX_X29		0x50
+#define OPTEED_C_RT_CTX_X30		0x58
+#define OPTEED_C_RT_CTX_SIZE		0x60
+#define OPTEED_C_RT_CTX_ENTRIES		(OPTEED_C_RT_CTX_SIZE >> DWORD_SHIFT)
+
+#ifndef __ASSEMBLY__
+
+#include <cassert.h>
+#include <stdint.h>
+
+typedef uint32_t optee_vector_isn_t;
+
+typedef struct optee_vectors {
+	optee_vector_isn_t std_smc_entry;
+	optee_vector_isn_t fast_smc_entry;
+	optee_vector_isn_t cpu_on_entry;
+	optee_vector_isn_t cpu_off_entry;
+	optee_vector_isn_t cpu_resume_entry;
+	optee_vector_isn_t cpu_suspend_entry;
+	optee_vector_isn_t fiq_entry;
+	optee_vector_isn_t system_off_entry;
+	optee_vector_isn_t system_reset_entry;
+} optee_vectors_t;
+
+/*
+ * The number of arguments to save during a SMC call for OPTEE.
+ * Currently only x1 and x2 are used by OPTEE.
+ */
+#define OPTEE_NUM_ARGS	0x2
+
+/* AArch64 callee saved general purpose register context structure. */
+DEFINE_REG_STRUCT(c_rt_regs, OPTEED_C_RT_CTX_ENTRIES);
+
+/*
+ * Compile time assertion to ensure that both the compiler and linker
+ * have the same double word aligned view of the size of the C runtime
+ * register context.
+ */
+CASSERT(OPTEED_C_RT_CTX_SIZE == sizeof(c_rt_regs_t),	\
+	assert_spd_c_rt_regs_size_mismatch);
+
+/*******************************************************************************
+ * Structure which helps the OPTEED to maintain the per-cpu state of OPTEE.
+ * 'state'          - collection of flags to track OPTEE state e.g. on/off
+ * 'mpidr'          - mpidr to associate a context with a cpu
+ * 'c_rt_ctx'       - stack address to restore C runtime context from after
+ *                    returning from a synchronous entry into OPTEE.
+ * 'cpu_ctx'        - space to maintain OPTEE architectural state
+ ******************************************************************************/
+typedef struct optee_context {
+	uint32_t state;
+	uint64_t mpidr;
+	uint64_t c_rt_ctx;
+	cpu_context_t cpu_ctx;
+} optee_context_t;
+
+/* OPTEED power management handlers */
+extern const spd_pm_ops_t opteed_pm;
+
+/*******************************************************************************
+ * Forward declarations
+ ******************************************************************************/
+struct optee_vectors;
+
+/*******************************************************************************
+ * Function & Data prototypes
+ ******************************************************************************/
+uint64_t opteed_enter_sp(uint64_t *c_rt_ctx);
+void __dead2 opteed_exit_sp(uint64_t c_rt_ctx, uint64_t ret);
+uint64_t opteed_synchronous_sp_entry(optee_context_t *optee_ctx);
+void __dead2 opteed_synchronous_sp_exit(optee_context_t *optee_ctx, uint64_t ret);
+void opteed_init_optee_ep_state(struct entry_point_info *optee_ep,
+				uint32_t rw,
+				uint64_t pc,
+				optee_context_t *optee_ctx);
+
+extern optee_context_t opteed_sp_context[OPTEED_CORE_COUNT];
+extern uint32_t opteed_rw;
+extern struct optee_vectors *optee_vectors;
+#endif /*__ASSEMBLY__*/
+
+#endif /* __OPTEED_PRIVATE_H__ */
diff --git a/services/spd/opteed/teesmc_opteed.h b/services/spd/opteed/teesmc_opteed.h
new file mode 100644
index 0000000..7968d1f
--- /dev/null
+++ b/services/spd/opteed/teesmc_opteed.h
@@ -0,0 +1,147 @@
+/*
+ * Copyright (c) 2014, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/* Copyright (c) 2014, Linaro Limited. All rights reserved. */
+
+#ifndef TEESMC_OPTEED_H
+#define TEESMC_OPTEED_H
+
+/*
+ * This file specify SMC function IDs used when returning from TEE to the
+ * secure monitor.
+ *
+ * All SMC Function IDs indicates SMC32 Calling Convention but will carry
+ * full 64 bit values in the argument registers if invoked from Aarch64
+ * mode. This violates the SMC Calling Convention, but since this
+ * convention only coveres API towards Normwal World it's something that
+ * only concerns the OP-TEE Dispatcher in ARM Trusted Firmware and OP-TEE
+ * OS at Secure EL1.
+ */
+
+/*
+ * Issued when returning from initial entry.
+ *
+ * Register usage:
+ * r0/x0	SMC Function ID, TEESMC_OPTEED_RETURN_ENTRY_DONE
+ * r1/x1	Pointer to entry vector
+ */
+#define TEESMC_OPTEED_FUNCID_RETURN_ENTRY_DONE		0
+#define TEESMC_OPTEED_RETURN_ENTRY_DONE \
+	TEESMC_OPTEED_RV(TEESMC_OPTEED_FUNCID_RETURN_ENTRY_DONE)
+
+
+
+/*
+ * Issued when returning from "cpu_on" vector
+ *
+ * Register usage:
+ * r0/x0	SMC Function ID, TEESMC_OPTEED_RETURN_ON_DONE
+ * r1/x1	0 on success and anything else to indicate error condition
+ */
+#define TEESMC_OPTEED_FUNCID_RETURN_ON_DONE		1
+#define TEESMC_OPTEED_RETURN_ON_DONE \
+	TEESMC_OPTEED_RV(TEESMC_OPTEED_FUNCID_RETURN_ON_DONE)
+
+/*
+ * Issued when returning from "cpu_off" vector
+ *
+ * Register usage:
+ * r0/x0	SMC Function ID, TEESMC_OPTEED_RETURN_OFF_DONE
+ * r1/x1	0 on success and anything else to indicate error condition
+ */
+#define TEESMC_OPTEED_FUNCID_RETURN_OFF_DONE		2
+#define TEESMC_OPTEED_RETURN_OFF_DONE \
+	TEESMC_OPTEED_RV(TEESMC_OPTEED_FUNCID_RETURN_OFF_DONE)
+
+/*
+ * Issued when returning from "cpu_suspend" vector
+ *
+ * Register usage:
+ * r0/x0	SMC Function ID, TEESMC_OPTEED_RETURN_SUSPEND_DONE
+ * r1/x1	0 on success and anything else to indicate error condition
+ */
+#define TEESMC_OPTEED_FUNCID_RETURN_SUSPEND_DONE	3
+#define TEESMC_OPTEED_RETURN_SUSPEND_DONE \
+	TEESMC_OPTEED_RV(TEESMC_OPTEED_FUNCID_RETURN_SUSPEND_DONE)
+
+/*
+ * Issued when returning from "cpu_resume" vector
+ *
+ * Register usage:
+ * r0/x0	SMC Function ID, TEESMC_OPTEED_RETURN_RESUME_DONE
+ * r1/x1	0 on success and anything else to indicate error condition
+ */
+#define TEESMC_OPTEED_FUNCID_RETURN_RESUME_DONE		4
+#define TEESMC_OPTEED_RETURN_RESUME_DONE \
+	TEESMC_OPTEED_RV(TEESMC_OPTEED_FUNCID_RETURN_RESUME_DONE)
+
+/*
+ * Issued when returning from "std_smc" or "fast_smc" vector
+ *
+ * Register usage:
+ * r0/x0	SMC Function ID, TEESMC_OPTEED_RETURN_CALL_DONE
+ * r1-4/x1-4	Return value 0-3 which will passed to normal world in
+ *		r0-3/x0-3
+ */
+#define TEESMC_OPTEED_FUNCID_RETURN_CALL_DONE		5
+#define TEESMC_OPTEED_RETURN_CALL_DONE \
+	TEESMC_OPTEED_RV(TEESMC_OPTEED_FUNCID_RETURN_CALL_DONE)
+
+/*
+ * Issued when returning from "fiq" vector
+ *
+ * Register usage:
+ * r0/x0	SMC Function ID, TEESMC_OPTEED_RETURN_FIQ_DONE
+ */
+#define TEESMC_OPTEED_FUNCID_RETURN_FIQ_DONE		6
+#define TEESMC_OPTEED_RETURN_FIQ_DONE \
+	TEESMC_OPTEED_RV(TEESMC_OPTEED_FUNCID_RETURN_FIQ_DONE)
+
+/*
+ * Issued when returning from "system_off" vector
+ *
+ * Register usage:
+ * r0/x0	SMC Function ID, TEESMC_OPTEED_RETURN_SYSTEM_OFF_DONE
+ */
+#define TEESMC_OPTEED_FUNCID_RETURN_SYSTEM_OFF_DONE	7
+#define TEESMC_OPTEED_RETURN_SYSTEM_OFF_DONE \
+	TEESMC_OPTEED_RV(TEESMC_OPTEED_FUNCID_RETURN_SYSTEM_OFF_DONE)
+
+/*
+ * Issued when returning from "system_reset" vector
+ *
+ * Register usage:
+ * r0/x0	SMC Function ID, TEESMC_OPTEED_RETURN_SYSTEM_RESET_DONE
+ */
+#define TEESMC_OPTEED_FUNCID_RETURN_SYSTEM_RESET_DONE	8
+#define TEESMC_OPTEED_RETURN_SYSTEM_RESET_DONE \
+	TEESMC_OPTEED_RV(TEESMC_OPTEED_FUNCID_RETURN_SYSTEM_RESET_DONE)
+
+#endif /*TEESMC_OPTEED_H*/
diff --git a/services/spd/opteed/teesmc_opteed_macros.h b/services/spd/opteed/teesmc_opteed_macros.h
new file mode 100644
index 0000000..2453c9a
--- /dev/null
+++ b/services/spd/opteed/teesmc_opteed_macros.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright (c) 2014, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef __TEESMC_OPTEED_MACROS_H__
+#define __TEESMC_OPTEED_MACROS_H__
+
+#include <runtime_svc.h>
+
+#define TEESMC_OPTEED_RV(func_num) \
+		((SMC_TYPE_FAST << FUNCID_TYPE_SHIFT) | \
+		 ((SMC_32) << FUNCID_CC_SHIFT) | \
+		 (62 << FUNCID_OEN_SHIFT) | \
+		 ((func_num) & FUNCID_NUM_MASK))
+
+#endif /*__TEESMC_OPTEED_MACROS_H__*/