diff --git a/bl32/tsp/aarch64/tsp_entrypoint.S b/bl32/tsp/aarch64/tsp_entrypoint.S
index 9732ff2..d183dff 100644
--- a/bl32/tsp/aarch64/tsp_entrypoint.S
+++ b/bl32/tsp/aarch64/tsp_entrypoint.S
@@ -177,7 +177,7 @@
 	b	tsp_cpu_off_entry
 	b	tsp_cpu_resume_entry
 	b	tsp_cpu_suspend_entry
-	b	tsp_fiq_entry
+	b	tsp_sel1_intr_entry
 	b	tsp_system_off_entry
 	b	tsp_system_reset_entry
 endfunc tsp_vector_table
@@ -325,13 +325,13 @@
 	restore_args_call_smc
 endfunc tsp_cpu_suspend_entry
 
-	/*---------------------------------------------
+	/*-------------------------------------------------
 	 * This entrypoint is used by the TSPD to pass
-	 * control for handling a pending S-EL1 FIQ.
+	 * control for handling a pending S-EL1 Interrupt.
 	 * 'x0' contains a magic number which indicates
 	 * this. TSPD expects control to be handed back
-	 * at the end of FIQ processing. This is done
-	 * through an SMC. The handover agreement is:
+	 * at the end of interrupt processing. This is
+	 * done through an SMC. The handover agreement is:
 	 *
 	 * 1. PSTATE.DAIF are set upon entry. 'x1' has
 	 *    the ELR_EL3 from the non-secure state.
@@ -343,40 +343,41 @@
 	 * 4. TSP can use 'x0-x18' to enable its C
 	 *    runtime.
 	 * 5. TSP returns to TSPD using an SMC with
-	 *    'x0' = TSP_HANDLED_S_EL1_FIQ
-	 * ---------------------------------------------
+	 *    'x0' = TSP_HANDLED_S_EL1_INTR
+	 * ------------------------------------------------
 	 */
-func	tsp_fiq_entry
+func	tsp_sel1_intr_entry
 #if DEBUG
-	mov	x2, #(TSP_HANDLE_FIQ_AND_RETURN & ~0xffff)
-	movk	x2, #(TSP_HANDLE_FIQ_AND_RETURN &  0xffff)
+	mov	x2, #(TSP_HANDLE_SEL1_INTR_AND_RETURN & ~0xffff)
+	movk	x2, #(TSP_HANDLE_SEL1_INTR_AND_RETURN &  0xffff)
 	cmp	x0, x2
-	b.ne	tsp_fiq_entry_panic
+	b.ne	tsp_sel1_int_entry_panic
 #endif
-	/*---------------------------------------------
+	/*-------------------------------------------------
 	 * Save any previous context needed to perform
 	 * an exception return from S-EL1 e.g. context
-	 * from a previous IRQ. Update statistics and
-	 * handle the FIQ before returning to the TSPD.
+	 * from a previous Non secure Interrupt.
+	 * Update statistics and handle the S-EL1
+	 * interrupt before returning to the TSPD.
 	 * IRQ/FIQs are not enabled since that will
 	 * complicate the implementation. Execution
 	 * will be transferred back to the normal world
 	 * in any case. A non-zero return value from the
-	 * fiq handler is an error.
-	 * ---------------------------------------------
+	 * interrupt handler is an error.
+	 * ------------------------------------------------
 	 */
 	save_eret_context x2 x3
-	bl	tsp_update_sync_fiq_stats
-	bl	tsp_fiq_handler
-	cbnz	x0, tsp_fiq_entry_panic
+	bl	tsp_update_sync_sel1_intr_stats
+	bl	tsp_common_int_handler
+	cbnz	x0, tsp_sel1_int_entry_panic
 	restore_eret_context x2 x3
-	mov	x0, #(TSP_HANDLED_S_EL1_FIQ & ~0xffff)
-	movk	x0, #(TSP_HANDLED_S_EL1_FIQ &  0xffff)
+	mov	x0, #(TSP_HANDLED_S_EL1_INTR & ~0xffff)
+	movk	x0, #(TSP_HANDLED_S_EL1_INTR &  0xffff)
 	smc	#0
 
-tsp_fiq_entry_panic:
-	b	tsp_fiq_entry_panic
-endfunc tsp_fiq_entry
+tsp_sel1_int_entry_panic:
+	b	tsp_sel1_int_entry_panic
+endfunc tsp_sel1_intr_entry
 
 	/*---------------------------------------------
 	 * This entrypoint is used by the TSPD when this
diff --git a/bl32/tsp/aarch64/tsp_exceptions.S b/bl32/tsp/aarch64/tsp_exceptions.S
index 272d94b..d5e089f 100644
--- a/bl32/tsp/aarch64/tsp_exceptions.S
+++ b/bl32/tsp/aarch64/tsp_exceptions.S
@@ -70,6 +70,28 @@
 	add	sp, sp, SCRATCH_REG_SIZE
 	.endm
 
+	/* ----------------------------------------------------
+	 * Common TSP interrupt handling routine
+	 * ----------------------------------------------------
+	 */
+	.macro	handle_tsp_interrupt label
+	/* Enable the SError interrupt */
+	msr	daifclr, #DAIF_ABT_BIT
+
+	save_caller_regs_and_lr
+	bl	tsp_common_int_handler
+	cbz	x0, interrupt_exit_\label
+
+	/*
+	 * This interrupt was not targetted to S-EL1 so send it to
+	 * the monitor and wait for execution to resume.
+	 */
+	smc	#0
+interrupt_exit_\label:
+	restore_caller_regs_and_lr
+	eret
+	.endm
+
 	.globl	tsp_exceptions
 
 	/* -----------------------------------------------------
@@ -120,36 +142,12 @@
 
 	.align	7
 irq_sp_elx:
-	/* Enable the SError interrupt */
-	msr	daifclr, #DAIF_ABT_BIT
-
-	save_caller_regs_and_lr
-	/* We just update some statistics in the handler */
-	bl	tsp_handle_preemption
-	/* Hand over control to the normal world to handle the IRQ */
-	smc	#0
-	/* The resume std smc starts from here */
-	restore_caller_regs_and_lr
-	eret
+	handle_tsp_interrupt irq_sp_elx
 	check_vector_size irq_sp_elx
 
 	.align	7
 fiq_sp_elx:
-	/* Enable the SError interrupt */
-	msr	daifclr, #DAIF_ABT_BIT
-
-	save_caller_regs_and_lr
-	bl	tsp_fiq_handler
-	cbz	x0, fiq_sp_elx_done
-
-	/*
-	 * This FIQ was not targetted to S-EL1 so send it to
-	 * the monitor and wait for execution to resume.
-	 */
-	smc	#0
-fiq_sp_elx_done:
-	restore_caller_regs_and_lr
-	eret
+	handle_tsp_interrupt fiq_sp_elx
 	check_vector_size fiq_sp_elx
 
 	.align	7