diff --git a/plat/mediatek/mt8192/drivers/rtc/rtc.c b/plat/mediatek/mt8192/drivers/rtc/rtc.c
new file mode 100644
index 0000000..124bc8f
--- /dev/null
+++ b/plat/mediatek/mt8192/drivers/rtc/rtc.c
@@ -0,0 +1,148 @@
+/*
+ * Copyright (c) 2020, MediaTek Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <common/debug.h>
+#include <drivers/delay_timer.h>
+#include <rtc.h>
+
+
+static void RTC_Config_Interface(uint32_t addr, uint16_t data,
+			    uint16_t mask, uint16_t shift)
+{
+	uint16_t pmic_reg;
+
+	pmic_reg = RTC_Read(addr);
+
+	pmic_reg &= ~(mask << shift);
+	pmic_reg |= (data << shift);
+
+	RTC_Write(addr, pmic_reg);
+}
+
+static int32_t rtc_disable_2sec_reboot(void)
+{
+	uint16_t reboot;
+
+	reboot = (RTC_Read(RTC_AL_SEC) & ~RTC_BBPU_2SEC_EN) &
+		 ~RTC_BBPU_AUTO_PDN_SEL;
+	RTC_Write(RTC_AL_SEC, reboot);
+
+	return RTC_Write_Trigger();
+}
+
+static int32_t rtc_enable_k_eosc(void)
+{
+	uint16_t alm_dow, alm_sec;
+	int16_t ret;
+
+	/* Turning on eosc cali mode clock */
+	RTC_Config_Interface(PMIC_RG_SCK_TOP_CKPDN_CON0_CLR, 1,
+			PMIC_RG_RTC_EOSC32_CK_PDN_MASK,
+			PMIC_RG_RTC_EOSC32_CK_PDN_SHIFT);
+
+	alm_sec = RTC_Read(RTC_AL_SEC) & (~RTC_LPD_OPT_MASK);
+	RTC_Write(RTC_AL_SEC, alm_sec);
+	ret = RTC_Write_Trigger();
+	if (ret == 0) {
+		return 0;
+	}
+
+	RTC_Write(RTC_CON, RTC_LPD_EN);
+	ret = RTC_Write_Trigger();
+	if (ret == 0) {
+		return 0;
+	}
+
+	RTC_Write(RTC_CON, RTC_LPD_RST);
+	ret = RTC_Write_Trigger();
+	if (ret == 0) {
+		return 0;
+	}
+
+	RTC_Write(RTC_CON, RTC_LPD_EN);
+	ret = RTC_Write_Trigger();
+	if (ret == 0) {
+		return 0;
+	}
+
+	RTC_Write(RTC_POWERKEY1, RTC_POWERKEY1_KEY);
+	RTC_Write(RTC_POWERKEY2, RTC_POWERKEY2_KEY);
+	ret = RTC_Write_Trigger();
+	if (ret == 0) {
+		return 0;
+	}
+
+	/* set RTC EOSC calibration period = 8sec */
+	alm_dow = (RTC_Read(RTC_AL_DOW) & (~RTC_RG_EOSC_CALI_TD_MASK)) |
+		  RTC_RG_EOSC_CALI_TD_8SEC;
+	RTC_Write(RTC_AL_DOW, alm_dow);
+	ret = RTC_Write_Trigger();
+	if (ret == 0) {
+		return 0;
+	}
+
+	RTC_Write(RTC_BBPU,
+		  RTC_Read(RTC_BBPU) | RTC_BBPU_KEY | RTC_BBPU_RELOAD);
+	ret = RTC_Write_Trigger();
+	if (ret == 0) {
+		return 0;
+	}
+
+	/* Enable K EOSC mode :use solution1 of eosc cali to fix mt6359p 32K*/
+	RTC_Write(RTC_AL_YEA, (((RTC_Read(RTC_AL_YEA) | RTC_K_EOSC_RSV_0)
+				& (~RTC_K_EOSC_RSV_1)) | (RTC_K_EOSC_RSV_2)));
+	ret = RTC_Write_Trigger();
+	if (ret == 0) {
+		return 0;
+	}
+
+	INFO("[RTC] RTC_enable_k_eosc\n");
+
+	return 1;
+}
+
+void rtc_power_off_sequence(void)
+{
+	uint16_t bbpu;
+	int16_t ret;
+
+	ret = rtc_disable_2sec_reboot();
+	if (ret == 0) {
+		return;
+	}
+
+	ret = rtc_enable_k_eosc();
+	if (ret == 0) {
+		return;
+	}
+
+	bbpu = RTC_BBPU_KEY | RTC_BBPU_PWREN;
+
+	if (Writeif_unlock() != 0) {
+		RTC_Write(RTC_BBPU,
+			  bbpu | RTC_BBPU_RESET_ALARM | RTC_BBPU_RESET_SPAR);
+		RTC_Write(RTC_AL_MASK, RTC_AL_MASK_DOW);
+		ret = RTC_Write_Trigger();
+		if (ret == 0) {
+			return;
+		}
+		mdelay(1);
+
+		bbpu = RTC_Read(RTC_BBPU);
+
+		if (((bbpu & RTC_BBPU_RESET_ALARM) > 0) ||
+		    ((bbpu & RTC_BBPU_RESET_SPAR) > 0)) {
+			INFO("[RTC] timeout\n");
+		}
+
+		bbpu = RTC_Read(RTC_BBPU) | RTC_BBPU_KEY | RTC_BBPU_RELOAD;
+		RTC_Write(RTC_BBPU, bbpu);
+		ret = RTC_Write_Trigger();
+		if (ret == 0) {
+			return;
+		}
+	}
+}
diff --git a/plat/mediatek/mt8192/drivers/rtc/rtc.h b/plat/mediatek/mt8192/drivers/rtc/rtc.h
new file mode 100644
index 0000000..419bfe4
--- /dev/null
+++ b/plat/mediatek/mt8192/drivers/rtc/rtc.h
@@ -0,0 +1,197 @@
+/*
+ * Copyright (c) 2020, MediaTek Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef RTC_H
+#define RTC_H
+
+/* RTC registers */
+enum {
+	RTC_BBPU = 0x0588,
+	RTC_IRQ_STA = 0x058A,
+	RTC_IRQ_EN = 0x058C,
+	RTC_CII_EN = 0x058E
+};
+
+enum {
+	RTC_AL_SEC = 0x05A0,
+	RTC_AL_MIN = 0x05A2,
+	RTC_AL_HOU = 0x05A4,
+	RTC_AL_DOM = 0x05A6,
+	RTC_AL_DOW = 0x05A8,
+	RTC_AL_MTH = 0x05AA,
+	RTC_AL_YEA = 0x05AC,
+	RTC_AL_MASK = 0x0590
+};
+
+enum {
+	RTC_OSC32CON = 0x05AE,
+	RTC_CON = 0x05C4,
+	RTC_WRTGR = 0x05C2
+};
+
+enum {
+	RTC_POWERKEY1 = 0x05B0,
+	RTC_POWERKEY2 = 0x05B2
+};
+
+enum {
+	RTC_POWERKEY1_KEY	= 0xA357,
+	RTC_POWERKEY2_KEY	= 0x67D2
+};
+
+enum {
+	RTC_PDN1 = 0x05B4,
+	RTC_PDN2 = 0x05B6,
+	RTC_SPAR0 = 0x05B8,
+	RTC_SPAR1 = 0x05BA,
+	RTC_PROT = 0x05BC,
+	RTC_DIFF = 0x05BE,
+	RTC_CALI = 0x05C0
+};
+
+enum {
+	RTC_OSC32CON_UNLOCK1 = 0x1A57,
+	RTC_OSC32CON_UNLOCK2 = 0x2B68
+};
+
+enum {
+	RTC_LPD_EN = 0x0406,
+	RTC_LPD_RST = 0x040E
+};
+
+enum {
+	RTC_LPD_OPT_XOSC_AND_EOSC_LPD	= 0U << 13,
+	RTC_LPD_OPT_EOSC_LPD		= 1U << 13,
+	RTC_LPD_OPT_XOSC_LPD		= 2U << 13,
+	RTC_LPD_OPT_F32K_CK_ALIVE	= 3U << 13,
+};
+
+#define RTC_LPD_OPT_MASK	(3U << 13)
+
+enum {
+	RTC_PROT_UNLOCK1 = 0x586A,
+	RTC_PROT_UNLOCK2 = 0x9136
+};
+
+enum {
+	RTC_BBPU_PWREN	= 1U << 0,
+	RTC_BBPU_SPAR_SW	= 1U << 1,
+	RTC_BBPU_RESET_SPAR	= 1U << 2,
+	RTC_BBPU_RESET_ALARM	= 1U << 3,
+	RTC_BBPU_CLRPKY	= 1U << 4,
+	RTC_BBPU_RELOAD	= 1U << 5,
+	RTC_BBPU_CBUSY	= 1U << 6
+};
+
+enum {
+	RTC_AL_MASK_SEC = 1U << 0,
+	RTC_AL_MASK_MIN = 1U << 1,
+	RTC_AL_MASK_HOU = 1U << 2,
+	RTC_AL_MASK_DOM = 1U << 3,
+	RTC_AL_MASK_DOW = 1U << 4,
+	RTC_AL_MASK_MTH = 1U << 5,
+	RTC_AL_MASK_YEA = 1U << 6
+};
+
+enum {
+	RTC_BBPU_AUTO_PDN_SEL = 1U << 6,
+	RTC_BBPU_2SEC_CK_SEL = 1U << 7,
+	RTC_BBPU_2SEC_EN = 1U << 8,
+	RTC_BBPU_2SEC_MODE = 0x3 << 9,
+	RTC_BBPU_2SEC_STAT_CLEAR = 1U << 11,
+	RTC_BBPU_2SEC_STAT_STA = 1U << 12
+};
+
+enum {
+	RTC_BBPU_KEY	= 0x43 << 8
+};
+
+enum {
+	RTC_EMBCK_SRC_SEL	= 1 << 8,
+	RTC_EMBCK_SEL_MODE	= 3 << 6,
+	RTC_XOSC32_ENB		= 1 << 5,
+	RTC_REG_XOSC32_ENB	= 1 << 15
+};
+
+enum {
+	RTC_K_EOSC_RSV_0	= 1 << 8,
+	RTC_K_EOSC_RSV_1	= 1 << 9,
+	RTC_K_EOSC_RSV_2	= 1 << 10
+};
+
+enum {
+	RTC_RG_EOSC_CALI_TD_1SEC	= 3 << 5,
+	RTC_RG_EOSC_CALI_TD_2SEC	= 4 << 5,
+	RTC_RG_EOSC_CALI_TD_4SEC	= 5 << 5,
+	RTC_RG_EOSC_CALI_TD_8SEC	= 6 << 5,
+	RTC_RG_EOSC_CALI_TD_16SEC	= 7 << 5,
+	RTC_RG_EOSC_CALI_TD_MASK	= 7 << 5
+};
+
+/* PMIC TOP Register Definition */
+enum {
+	PMIC_RG_TOP_CON = 0x0020,
+	PMIC_RG_TOP_CKPDN_CON1 = 0x0112,
+	PMIC_RG_TOP_CKPDN_CON1_SET = 0x0114,
+	PMIC_RG_TOP_CKPDN_CON1_CLR = 0x0116,
+	PMIC_RG_TOP_CKSEL_CON0 = 0x0118,
+	PMIC_RG_TOP_CKSEL_CON0_SET = 0x011A,
+	PMIC_RG_TOP_CKSEL_CON0_CLR = 0x011C
+};
+
+/* PMIC SCK Register Definition */
+enum {
+	PMIC_RG_SCK_TOP_CKPDN_CON0 = 0x0514,
+	PMIC_RG_SCK_TOP_CKPDN_CON0_SET = 0x0516,
+	PMIC_RG_SCK_TOP_CKPDN_CON0_CLR = 0x0518,
+	PMIC_RG_EOSC_CALI_CON0 = 0x53A
+};
+
+enum {
+	PMIC_EOSC_CALI_START_ADDR = 0x53A
+};
+
+enum {
+	PMIC_EOSC_CALI_START_MASK = 0x1,
+	PMIC_EOSC_CALI_START_SHIFT = 0
+};
+
+/* PMIC DCXO Register Definition */
+enum {
+	PMIC_RG_DCXO_CW00 = 0x0788,
+	PMIC_RG_DCXO_CW02 = 0x0790,
+	PMIC_RG_DCXO_CW08 = 0x079C,
+	PMIC_RG_DCXO_CW09 = 0x079E,
+	PMIC_RG_DCXO_CW09_CLR = 0x07A2,
+	PMIC_RG_DCXO_CW10 = 0x07A4,
+	PMIC_RG_DCXO_CW12 = 0x07A8,
+	PMIC_RG_DCXO_CW13 = 0x07AA,
+	PMIC_RG_DCXO_CW15 = 0x07AE,
+	PMIC_RG_DCXO_CW19 = 0x07B6,
+};
+
+enum {
+	PMIC_RG_SRCLKEN_IN0_HW_MODE_MASK = 0x1,
+	PMIC_RG_SRCLKEN_IN0_HW_MODE_SHIFT = 1,
+	PMIC_RG_SRCLKEN_IN1_HW_MODE_MASK = 0x1,
+	PMIC_RG_SRCLKEN_IN1_HW_MODE_SHIFT = 3,
+	PMIC_RG_RTC_EOSC32_CK_PDN_MASK = 0x1,
+	PMIC_RG_RTC_EOSC32_CK_PDN_SHIFT = 2,
+	PMIC_RG_EOSC_CALI_TD_MASK = 0x7,
+	PMIC_RG_EOSC_CALI_TD_SHIFT = 5,
+	PMIC_RG_XO_EN32K_MAN_MASK = 0x1,
+	PMIC_RG_XO_EN32K_MAN_SHIFT = 0
+};
+
+/* external API */
+uint16_t RTC_Read(uint32_t addr);
+void RTC_Write(uint32_t addr, uint16_t data);
+int32_t rtc_busy_wait(void);
+int32_t RTC_Write_Trigger(void);
+int32_t Writeif_unlock(void);
+void rtc_power_off_sequence(void);
+
+#endif /* RTC_H */
diff --git a/plat/mediatek/mt8192/plat_pm.c b/plat/mediatek/mt8192/plat_pm.c
index 1fcafeb..6a74c02 100644
--- a/plat/mediatek/mt8192/plat_pm.c
+++ b/plat/mediatek/mt8192/plat_pm.c
@@ -21,6 +21,7 @@
 #include <plat_params.h>
 #include <plat_pm.h>
 #include <pmic.h>
+#include <rtc.h>
 
 /*
  * Cluster state request:
@@ -341,6 +342,7 @@
 {
 	INFO("MTK System Off\n");
 
+	rtc_power_off_sequence();
 	pmic_power_off();
 
 	wfi();
diff --git a/plat/mediatek/mt8192/platform.mk b/plat/mediatek/mt8192/platform.mk
index c21914e..a5e7ee2 100644
--- a/plat/mediatek/mt8192/platform.mk
+++ b/plat/mediatek/mt8192/platform.mk
@@ -16,6 +16,7 @@
                  -I${MTK_PLAT_SOC}/drivers/mcdi/                  \
                  -I${MTK_PLAT_SOC}/drivers/pmic/                  \
                  -I${MTK_PLAT_SOC}/drivers/ptp3/                  \
+                 -I${MTK_PLAT_SOC}/drivers/rtc/                   \
                  -I${MTK_PLAT_SOC}/drivers/spmc/                  \
                  -I${MTK_PLAT_SOC}/drivers/timer/                 \
                  -I${MTK_PLAT_SOC}/drivers/uart/
@@ -39,6 +40,7 @@
                    lib/cpus/aarch64/cortex_a76.S                         \
                    plat/common/plat_gicv3.c                              \
                    ${MTK_PLAT}/common/drivers/pmic_wrap/pmic_wrap_init_v2.c \
+                   ${MTK_PLAT}/common/drivers/rtc/rtc_common.c           \
                    ${MTK_PLAT}/common/drivers/uart/uart.c                \
                    ${MTK_PLAT}/common/mtk_plat_common.c                  \
                    ${MTK_PLAT}/common/mtk_sip_svc.c                      \
@@ -47,6 +49,7 @@
                    ${MTK_PLAT_SOC}/aarch64/plat_helpers.S                \
                    ${MTK_PLAT_SOC}/bl31_plat_setup.c                     \
                    ${MTK_PLAT_SOC}/drivers/pmic/pmic.c                   \
+                   ${MTK_PLAT_SOC}/drivers/rtc/rtc.c                     \
                    ${MTK_PLAT_SOC}/plat_pm.c                             \
                    ${MTK_PLAT_SOC}/plat_topology.c                       \
                    ${MTK_PLAT_SOC}/plat_mt_gic.c                         \