rpi3: Move rpi3_hw.h header file to include/rpi_hw.h
With the advent of Raspberry Pi 4 support, we need to separate some
board specific headers between the RPi3 and RPi4.
Rename and move the "rpi3_hw.h" header, so that .c files just include
rpi_hw.h, and automatically get the correct version.
Change-Id: I03b39063028d2bee1429bffccde71dddfe2dcde8
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
diff --git a/plat/rpi/rpi3/include/rpi_hw.h b/plat/rpi/rpi3/include/rpi_hw.h
new file mode 100644
index 0000000..7a3ea57
--- /dev/null
+++ b/plat/rpi/rpi3/include/rpi_hw.h
@@ -0,0 +1,110 @@
+/*
+ * Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef RPI_HW_H
+#define RPI_HW_H
+
+#include <lib/utils_def.h>
+
+/*
+ * Peripherals
+ */
+
+#define RPI3_IO_BASE ULL(0x3F000000)
+#define RPI3_IO_SIZE ULL(0x01000000)
+
+/*
+ * ARM <-> VideoCore mailboxes
+ */
+#define RPI3_MBOX_OFFSET ULL(0x0000B880)
+#define RPI3_MBOX_BASE (RPI3_IO_BASE + RPI3_MBOX_OFFSET)
+/* VideoCore -> ARM */
+#define RPI3_MBOX0_READ_OFFSET ULL(0x00000000)
+#define RPI3_MBOX0_PEEK_OFFSET ULL(0x00000010)
+#define RPI3_MBOX0_SENDER_OFFSET ULL(0x00000014)
+#define RPI3_MBOX0_STATUS_OFFSET ULL(0x00000018)
+#define RPI3_MBOX0_CONFIG_OFFSET ULL(0x0000001C)
+/* ARM -> VideoCore */
+#define RPI3_MBOX1_WRITE_OFFSET ULL(0x00000020)
+#define RPI3_MBOX1_PEEK_OFFSET ULL(0x00000030)
+#define RPI3_MBOX1_SENDER_OFFSET ULL(0x00000034)
+#define RPI3_MBOX1_STATUS_OFFSET ULL(0x00000038)
+#define RPI3_MBOX1_CONFIG_OFFSET ULL(0x0000003C)
+/* Mailbox status constants */
+#define RPI3_MBOX_STATUS_FULL_MASK U(0x80000000) /* Set if full */
+#define RPI3_MBOX_STATUS_EMPTY_MASK U(0x40000000) /* Set if empty */
+
+/*
+ * Power management, reset controller, watchdog.
+ */
+#define RPI3_IO_PM_OFFSET ULL(0x00100000)
+#define RPI3_PM_BASE (RPI3_IO_BASE + RPI3_IO_PM_OFFSET)
+/* Registers on top of RPI3_PM_BASE. */
+#define RPI3_PM_RSTC_OFFSET ULL(0x0000001C)
+#define RPI3_PM_RSTS_OFFSET ULL(0x00000020)
+#define RPI3_PM_WDOG_OFFSET ULL(0x00000024)
+/* Watchdog constants */
+#define RPI3_PM_PASSWORD U(0x5A000000)
+#define RPI3_PM_RSTC_WRCFG_MASK U(0x00000030)
+#define RPI3_PM_RSTC_WRCFG_FULL_RESET U(0x00000020)
+/*
+ * The RSTS register is used by the VideoCore firmware when booting the
+ * Raspberry Pi to know which partition to boot from. The partition value is
+ * formed by bits 0, 2, 4, 6, 8 and 10. Partition 63 is used by said firmware
+ * to indicate halt.
+ */
+#define RPI3_PM_RSTS_WRCFG_HALT U(0x00000555)
+
+/*
+ * Hardware random number generator.
+ */
+#define RPI3_IO_RNG_OFFSET ULL(0x00104000)
+#define RPI3_RNG_BASE (RPI3_IO_BASE + RPI3_IO_RNG_OFFSET)
+#define RPI3_RNG_CTRL_OFFSET ULL(0x00000000)
+#define RPI3_RNG_STATUS_OFFSET ULL(0x00000004)
+#define RPI3_RNG_DATA_OFFSET ULL(0x00000008)
+#define RPI3_RNG_INT_MASK_OFFSET ULL(0x00000010)
+/* Enable/disable RNG */
+#define RPI3_RNG_CTRL_ENABLE U(0x1)
+#define RPI3_RNG_CTRL_DISABLE U(0x0)
+/* Number of currently available words */
+#define RPI3_RNG_STATUS_NUM_WORDS_SHIFT U(24)
+#define RPI3_RNG_STATUS_NUM_WORDS_MASK U(0xFF)
+/* Value to mask interrupts caused by the RNG */
+#define RPI3_RNG_INT_MASK_DISABLE U(0x1)
+
+/*
+ * Serial port (called 'Mini UART' in the BCM docucmentation).
+ */
+#define RPI3_IO_MINI_UART_OFFSET ULL(0x00215040)
+#define RPI3_MINI_UART_BASE (RPI3_IO_BASE + RPI3_IO_MINI_UART_OFFSET)
+#define RPI3_MINI_UART_CLK_IN_HZ ULL(500000000)
+
+/*
+ * GPIO controller
+ */
+#define RPI3_IO_GPIO_OFFSET ULL(0x00200000)
+#define RPI3_GPIO_BASE (RPI3_IO_BASE + RPI3_IO_GPIO_OFFSET)
+
+/*
+ * SDHost controller
+ */
+#define RPI3_IO_SDHOST_OFFSET ULL(0x00202000)
+#define RPI3_SDHOST_BASE (RPI3_IO_BASE + RPI3_IO_SDHOST_OFFSET)
+
+/*
+ * Local interrupt controller
+ */
+#define RPI3_INTC_BASE_ADDRESS ULL(0x40000000)
+/* Registers on top of RPI3_INTC_BASE_ADDRESS */
+#define RPI3_INTC_CONTROL_OFFSET ULL(0x00000000)
+#define RPI3_INTC_PRESCALER_OFFSET ULL(0x00000008)
+#define RPI3_INTC_MBOX_CONTROL_OFFSET ULL(0x00000050)
+#define RPI3_INTC_MBOX_CONTROL_SLOT3_FIQ ULL(0x00000080)
+#define RPI3_INTC_PENDING_FIQ_OFFSET ULL(0x00000070)
+#define RPI3_INTC_PENDING_FIQ_MBOX3 ULL(0x00000080)
+
+#endif /* RPI_HW_H */