blob: 9cd3011e84d6df82b80006cb002270fe30d6cf60 [file] [log] [blame]
# Copyright (c) 2021-2024, Arm Limited. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
include common/fdt_wrappers.mk
TARGET_FLAVOUR := fvp
# DPU with SCMI may not necessarily work, so allow its independence
TC_DPU_USE_SCMI_CLK := 1
# SCMI power domain control enable
TC_SCMI_PD_CTRL_EN := 1
# System setup
CSS_USE_SCMI_SDS_DRIVER := 1
HW_ASSISTED_COHERENCY := 1
USE_COHERENT_MEM := 0
GIC_ENABLE_V4_EXTN := 1
GICV3_SUPPORT_GIC600 := 1
override NEED_BL2U := no
override ARM_PLAT_MT := 1
# CPU setup
ARM_ARCH_MINOR := 7
BRANCH_PROTECTION := 1
ENABLE_FEAT_MPAM := 1 # default is 2, optimise
ENABLE_SVE_FOR_NS := 2 # to show we use it
ENABLE_SVE_FOR_SWD := 1
ENABLE_SME_FOR_NS := 2
ENABLE_SME2_FOR_NS := 2
ENABLE_SME_FOR_SWD := 1
ENABLE_TRBE_FOR_NS := 1
ENABLE_SYS_REG_TRACE_FOR_NS := 1
ENABLE_FEAT_AMU := 1
ENABLE_AMU_FCONF := 1
ENABLE_AMU_AUXILIARY_COUNTERS := 1
ENABLE_MPMM := 1
ENABLE_MPMM_FCONF := 1
ENABLE_FEAT_MTE2 := 2
ENABLE_SPE_FOR_NS := 3
ENABLE_FEAT_TCR2 := 3
CTX_INCLUDE_AARCH32_REGS := 0
ifeq (${SPD},spmd)
SPMD_SPM_AT_SEL2 := 1
CTX_INCLUDE_PAUTH_REGS := 1
endif
# TC RESOLUTION - LIST OF VALID OPTIONS (this impacts only FVP)
TC_RESOLUTION_OPTIONS := 640x480p60 \
1920x1080p60
# Set default to the 640x480p60 resolution mode
TC_RESOLUTION ?= $(firstword $(TC_RESOLUTION_OPTIONS))
# Check resolution option for FVP
ifneq ($(filter ${TARGET_FLAVOUR}, fvp),)
ifeq ($(filter ${TC_RESOLUTION}, ${TC_RESOLUTION_OPTIONS}),)
$(error TC_RESOLUTION is ${TC_RESOLUTION}, it must be: ${TC_RESOLUTION_OPTIONS})
endif
endif
ifneq ($(shell expr $(TARGET_PLATFORM) \<= 1), 0)
$(error Platform ${PLAT}$(TARGET_PLATFORM) is no longer available.)
endif
ifneq ($(shell expr $(TARGET_PLATFORM) = 2), 0)
$(warning Platform ${PLAT}$(TARGET_PLATFORM) is deprecated. \
Some of the features might not work as expected)
endif
ifeq ($(shell expr $(TARGET_PLATFORM) \<= 4), 0)
$(error TARGET_PLATFORM must be less than or equal to 4)
endif
ifeq ($(filter ${TARGET_FLAVOUR}, fvp fpga),)
$(error TARGET_FLAVOUR must be fvp or fpga)
endif
$(eval $(call add_defines, \
TARGET_PLATFORM \
TARGET_FLAVOUR_$(call uppercase,${TARGET_FLAVOUR}) \
TC_RESOLUTION_$(call uppercase,${TC_RESOLUTION}) \
TC_DPU_USE_SCMI_CLK \
TC_SCMI_PD_CTRL_EN \
))
CSS_LOAD_SCP_IMAGES := 1
# Save DSU PMU registers on cluster off and restore them on cluster on
PRESERVE_DSU_PMU_REGS := 1
# Specify MHU type based on platform
ifneq ($(filter ${TARGET_PLATFORM}, 2),)
PLAT_MHU_VERSION := 2
else
PLAT_MHU_VERSION := 3
endif
# Include GICv3 driver files
include drivers/arm/gic/v3/gicv3.mk
ENT_GIC_SOURCES := ${GICV3_SOURCES} \
plat/common/plat_gicv3.c \
plat/arm/common/arm_gicv3.c
TC_BASE = plat/arm/board/tc
PLAT_INCLUDES += -I${TC_BASE}/include/ \
-I${TC_BASE}/fdts/
# CPU libraries for TARGET_PLATFORM=1
ifeq (${TARGET_PLATFORM}, 1)
TC_CPU_SOURCES += lib/cpus/aarch64/cortex_a510.S \
lib/cpus/aarch64/cortex_a715.S \
lib/cpus/aarch64/cortex_x3.S
endif
# CPU libraries for TARGET_PLATFORM=2
ifeq (${TARGET_PLATFORM}, 2)
ERRATA_A520_2938996 := 1
ERRATA_X4_2726228 := 1
TC_CPU_SOURCES += lib/cpus/aarch64/cortex_a520.S \
lib/cpus/aarch64/cortex_a720.S \
lib/cpus/aarch64/cortex_x4.S
endif
# CPU libraries for TARGET_PLATFORM=3
ifeq (${TARGET_PLATFORM}, 3)
ERRATA_A520_2938996 := 1
TC_CPU_SOURCES += lib/cpus/aarch64/cortex_a520.S \
lib/cpus/aarch64/cortex_a725.S \
lib/cpus/aarch64/cortex_x925.S
endif
# CPU libraries for TARGET_PLATFORM=4
ifeq (${TARGET_PLATFORM}, 4)
TC_CPU_SOURCES += lib/cpus/aarch64/cortex_gelas.S \
lib/cpus/aarch64/nevis.S \
lib/cpus/aarch64/travis.S
endif
INTERCONNECT_SOURCES := ${TC_BASE}/tc_interconnect.c \
plat/arm/common/arm_ni.c
PLAT_BL_COMMON_SOURCES += ${TC_BASE}/tc_plat.c \
${TC_BASE}/include/tc_helpers.S
BL1_SOURCES += ${INTERCONNECT_SOURCES} \
${TC_CPU_SOURCES} \
${TC_BASE}/tc_trusted_boot.c \
${TC_BASE}/tc_bl1_setup.c \
${TC_BASE}/tc_err.c \
drivers/arm/sbsa/sbsa.c
BL2_SOURCES += ${TC_BASE}/tc_security.c \
${TC_BASE}/tc_err.c \
${TC_BASE}/tc_trusted_boot.c \
${TC_BASE}/tc_bl2_setup.c \
lib/utils/mem_region.c \
drivers/arm/tzc/tzc400.c \
plat/arm/common/arm_nor_psci_mem_protect.c
ifeq ($(shell test $(TARGET_PLATFORM) -le 2; echo $$?),0)
BL2_SOURCES += plat/arm/common/arm_tzc400.c
endif
BL31_SOURCES += ${INTERCONNECT_SOURCES} \
${TC_CPU_SOURCES} \
${ENT_GIC_SOURCES} \
${TC_BASE}/tc_bl31_setup.c \
${TC_BASE}/tc_topology.c \
lib/fconf/fconf.c \
lib/fconf/fconf_dyn_cfg_getter.c \
drivers/arm/css/dsu/dsu.c \
drivers/cfi/v2m/v2m_flash.c \
lib/utils/mem_region.c \
plat/arm/common/arm_nor_psci_mem_protect.c \
drivers/arm/sbsa/sbsa.c
BL31_SOURCES += ${FDT_WRAPPERS_SOURCES}
# Add the FDT_SOURCES and options for Dynamic Config
FDT_SOURCES += ${TC_BASE}/fdts/${PLAT}_fw_config.dts \
${TC_BASE}/fdts/${PLAT}_tb_fw_config.dts \
${TC_BASE}/fdts/${PLAT}_nt_fw_config.dts
FW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}_fw_config.dtb
TB_FW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}_tb_fw_config.dtb
FVP_NT_FW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}_nt_fw_config.dtb
# Add the FW_CONFIG to FIP and specify the same to certtool
$(eval $(call TOOL_ADD_PAYLOAD,${FW_CONFIG},--fw-config,${FW_CONFIG}))
# Add the TB_FW_CONFIG to FIP and specify the same to certtool
$(eval $(call TOOL_ADD_PAYLOAD,${TB_FW_CONFIG},--tb-fw-config,${TB_FW_CONFIG}))
# Add the NT_FW_CONFIG to FIP and specify the same to certtool
$(eval $(call TOOL_ADD_PAYLOAD,${FVP_NT_FW_CONFIG},--nt-fw-config,${FVP_NT_FW_CONFIG}))
ifeq (${SPD},spmd)
ifeq ($(ARM_SPMC_MANIFEST_DTS),)
ARM_SPMC_MANIFEST_DTS := ${TC_BASE}/fdts/${PLAT}_spmc_test_manifest.dts
endif
FDT_SOURCES += ${ARM_SPMC_MANIFEST_DTS}
TC_TOS_FW_CONFIG := ${BUILD_PLAT}/fdts/$(notdir $(basename ${ARM_SPMC_MANIFEST_DTS})).dtb
# Add the TOS_FW_CONFIG to FIP and specify the same to certtool
$(eval $(call TOOL_ADD_PAYLOAD,${TC_TOS_FW_CONFIG},--tos-fw-config,${TC_TOS_FW_CONFIG}))
endif
#Device tree
TC_HW_CONFIG_DTS := fdts/${PLAT}${TARGET_PLATFORM}.dts
TC_HW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}.dtb
FDT_SOURCES += ${TC_HW_CONFIG_DTS}
$(eval TC_HW_CONFIG := ${BUILD_PLAT}/$(patsubst %.dts,%.dtb,$(TC_HW_CONFIG_DTS)))
# Add the HW_CONFIG to FIP and specify the same to certtool
$(eval $(call TOOL_ADD_PAYLOAD,${TC_HW_CONFIG},--hw-config,${TC_HW_CONFIG}))
# Include Measured Boot makefile before any Crypto library makefile.
# Crypto library makefile may need default definitions of Measured Boot build
# flags present in Measured Boot makefile.
$(info Including rse_comms.mk)
ifeq (${MEASURED_BOOT},1)
$(info Including rse_comms.mk)
include drivers/arm/rse/rse_comms.mk
BL1_SOURCES += ${RSE_COMMS_SOURCES}
BL2_SOURCES += ${RSE_COMMS_SOURCES}
PLAT_INCLUDES += -Iinclude/lib/psa
ifeq (${DICE_PROTECTION_ENVIRONMENT},1)
$(info Including qcbor.mk)
include drivers/measured_boot/rse/qcbor.mk
$(info Including dice_prot_env.mk)
include drivers/measured_boot/rse/dice_prot_env.mk
BL1_SOURCES += ${QCBOR_SOURCES} \
${DPE_SOURCES} \
plat/arm/board/tc/tc_common_dpe.c \
plat/arm/board/tc/tc_bl1_dpe.c \
lib/psa/dice_protection_environment.c \
drivers/arm/css/sds/sds.c \
drivers/delay_timer/delay_timer.c \
drivers/delay_timer/generic_delay_timer.c
BL2_SOURCES += ${QCBOR_SOURCES} \
${DPE_SOURCES} \
plat/arm/board/tc/tc_common_dpe.c \
plat/arm/board/tc/tc_bl2_dpe.c \
lib/psa/dice_protection_environment.c
PLAT_INCLUDES += -I${QCBOR_INCLUDES} \
-Iinclude/lib/dice
else
$(info Including rse_measured_boot.mk)
include drivers/measured_boot/rse/rse_measured_boot.mk
BL1_SOURCES += ${MEASURED_BOOT_SOURCES} \
plat/arm/board/tc/tc_common_measured_boot.c \
plat/arm/board/tc/tc_bl1_measured_boot.c \
lib/psa/measured_boot.c
BL2_SOURCES += ${MEASURED_BOOT_SOURCES} \
plat/arm/board/tc/tc_common_measured_boot.c \
plat/arm/board/tc/tc_bl2_measured_boot.c \
lib/psa/measured_boot.c
endif
endif
ifeq (${TRNG_SUPPORT},1)
BL31_SOURCES += plat/arm/board/tc/tc_trng.c
endif
ifneq (${PLATFORM_TEST},)
# Add this include as first, before arm_common.mk. This is necessary
# because arm_common.mk builds Mbed TLS, and platform_test.mk can
# change the list of Mbed TLS files that are to be compiled
# (LIBMBEDTLS_SRCS).
include plat/arm/board/tc/platform_test.mk
endif
include plat/arm/common/arm_common.mk
include plat/arm/css/common/css_common.mk
include plat/arm/board/common/board_common.mk