diff --git a/include/common/bl_common.h b/include/common/bl_common.h
index 66c20fc..38be628 100644
--- a/include/common/bl_common.h
+++ b/include/common/bl_common.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2016, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -31,9 +31,8 @@
 #ifndef __BL_COMMON_H__
 #define __BL_COMMON_H__
 
-#define SECURE		0x0
-#define NON_SECURE	0x1
-#define sec_state_is_valid(s) (((s) == SECURE) || ((s) == NON_SECURE))
+#include <ep_info.h>
+#include <param_header.h>
 
 #define UP	1
 #define DOWN	0
@@ -45,25 +44,6 @@
 #define TOP	0x1
 #define BOTTOM	!TOP
 
-/*******************************************************************************
- * Constants that allow assembler code to access members of and the
- * 'entry_point_info' structure at their correct offsets.
- ******************************************************************************/
-#define ENTRY_POINT_INFO_PC_OFFSET	0x08
-#ifdef AARCH32
-#define ENTRY_POINT_INFO_ARGS_OFFSET	0x10
-#else
-#define ENTRY_POINT_INFO_ARGS_OFFSET	0x18
-#endif
-
-/* The following are used to set/get image attributes. */
-#define PARAM_EP_SECURITY_MASK		(0x1)
-
-#define GET_SECURITY_STATE(x) (x & PARAM_EP_SECURITY_MASK)
-#define SET_SECURITY_STATE(x, security) \
-			((x) = ((x) & ~PARAM_EP_SECURITY_MASK) | (security))
-
-
 /*
  * The following are used for image state attributes.
  * Image can only be in one of the following state.
@@ -75,59 +55,11 @@
 #define IMAGE_STATE_EXECUTED			4
 #define IMAGE_STATE_INTERRUPTED			5
 
-#define EP_EE_MASK	0x2
-#define EP_EE_LITTLE	0x0
-#define EP_EE_BIG	0x2
-#define EP_GET_EE(x) (x & EP_EE_MASK)
-#define EP_SET_EE(x, ee) ((x) = ((x) & ~EP_EE_MASK) | (ee))
-
-#define EP_ST_MASK	0x4
-#define EP_ST_DISABLE	0x0
-#define EP_ST_ENABLE	0x4
-#define EP_GET_ST(x) (x & EP_ST_MASK)
-#define EP_SET_ST(x, ee) ((x) = ((x) & ~EP_ST_MASK) | (ee))
-
-#define EP_EXE_MASK	0x8
-#define NON_EXECUTABLE	0x0
-#define EXECUTABLE	0x8
-#define EP_GET_EXE(x) (x & EP_EXE_MASK)
-#define EP_SET_EXE(x, ee) ((x) = ((x) & ~EP_EXE_MASK) | (ee))
-
-#define EP_FIRST_EXE_MASK	0x10
-#define EP_FIRST_EXE		0x10
-#define EP_GET_FIRST_EXE(x) ((x) & EP_FIRST_EXE_MASK)
-#define EP_SET_FIRST_EXE(x, ee) ((x) = ((x) & ~EP_FIRST_EXE_MASK) | (ee))
-
-#define PARAM_EP		0x01
-#define PARAM_IMAGE_BINARY	0x02
-#define PARAM_BL31		0x03
-#define PARAM_BL_LOAD_INFO	0x04
-#define PARAM_BL_PARAMS		0x05
-#define PARAM_PSCI_LIB_ARGS	0x06
-
 #define IMAGE_ATTRIB_SKIP_LOADING	0x02
 #define IMAGE_ATTRIB_PLAT_SETUP		0x04
 
-#define VERSION_1	0x01
-#define VERSION_2	0x02
-
 #define INVALID_IMAGE_ID		(0xFFFFFFFF)
 
-#define SET_PARAM_HEAD(_p, _type, _ver, _attr) do { \
-	(_p)->h.type = (uint8_t)(_type); \
-	(_p)->h.version = (uint8_t)(_ver); \
-	(_p)->h.size = (uint16_t)sizeof(*_p); \
-	(_p)->h.attr = (uint32_t)(_attr) ; \
-	} while (0)
-
-/* Following is used for populating structure members statically. */
-#define SET_STATIC_PARAM_HEAD(_p, _type, _ver, _p_type, _attr)	\
-	._p.h.type = (uint8_t)(_type), \
-	._p.h.version = (uint8_t)(_ver), \
-	._p.h.size = (uint16_t)sizeof(_p_type), \
-	._p.h.attr = (uint32_t)(_attr)
-
-
 /*******************************************************************************
  * Constants to indicate type of exception to the common exception handler.
  ******************************************************************************/
@@ -149,10 +81,9 @@
 #define SERROR_AARCH32			0xf
 
 #ifndef __ASSEMBLY__
-#include <cdefs.h> /* For __dead2 */
 #include <cassert.h>
-#include <stdint.h>
 #include <stddef.h>
+#include <stdint.h>
 #include <types.h>
 #include <utils.h> /* To retain compatibility */
 
@@ -185,7 +116,6 @@
 extern uintptr_t __COHERENT_RAM_END__;
 #endif
 
-
 /*******************************************************************************
  * Structure used for telling the next BL how much of a particular type of
  * memory is available for its use and how much is already used.
@@ -199,55 +129,6 @@
 #endif
 } meminfo_t;
 
-typedef struct aapcs64_params {
-	u_register_t arg0;
-	u_register_t arg1;
-	u_register_t arg2;
-	u_register_t arg3;
-	u_register_t arg4;
-	u_register_t arg5;
-	u_register_t arg6;
-	u_register_t arg7;
-} aapcs64_params_t;
-
-typedef struct aapcs32_params {
-	u_register_t arg0;
-	u_register_t arg1;
-	u_register_t arg2;
-	u_register_t arg3;
-} aapcs32_params_t;
-
-/***************************************************************************
- * This structure provides version information and the size of the
- * structure, attributes for the structure it represents
- ***************************************************************************/
-typedef struct param_header {
-	uint8_t type;		/* type of the structure */
-	uint8_t version;    /* version of this structure */
-	uint16_t size;      /* size of this structure in bytes */
-	uint32_t attr;      /* attributes: unused bits SBZ */
-} param_header_t;
-
-/*****************************************************************************
- * This structure represents the superset of information needed while
- * switching exception levels. The only two mechanisms to do so are
- * ERET & SMC. Security state is indicated using bit zero of header
- * attribute
- * NOTE: BL1 expects entrypoint followed by spsr at an offset from the start
- * of this structure defined by the macro `ENTRY_POINT_INFO_PC_OFFSET` while
- * processing SMC to jump to BL31.
- *****************************************************************************/
-typedef struct entry_point_info {
-	param_header_t h;
-	uintptr_t pc;
-	uint32_t spsr;
-#ifdef AARCH32
-	aapcs32_params_t args;
-#else
-	aapcs64_params_t args;
-#endif
-} entry_point_info_t;
-
 /*****************************************************************************
  * Image info binary provides information from the image loader that
  * can be used by the firmware to manage available trusted RAM.
@@ -338,24 +219,6 @@
 
 #endif /* LOAD_IMAGE_V2 */
 
-/*
- * Compile time assertions related to the 'entry_point_info' structure to
- * ensure that the assembler and the compiler view of the offsets of
- * the structure members is the same.
- */
-CASSERT(ENTRY_POINT_INFO_PC_OFFSET ==
-		__builtin_offsetof(entry_point_info_t, pc), \
-		assert_BL31_pc_offset_mismatch);
-
-CASSERT(ENTRY_POINT_INFO_ARGS_OFFSET == \
-		__builtin_offsetof(entry_point_info_t, args), \
-		assert_BL31_args_offset_mismatch);
-
-CASSERT(sizeof(uintptr_t) ==
-		__builtin_offsetof(entry_point_info_t, spsr) - \
-		__builtin_offsetof(entry_point_info_t, pc), \
-		assert_entrypoint_and_spsr_should_be_adjacent);
-
 /*******************************************************************************
  * Function & variable prototypes
  ******************************************************************************/
diff --git a/include/common/ep_info.h b/include/common/ep_info.h
new file mode 100644
index 0000000..3613614
--- /dev/null
+++ b/include/common/ep_info.h
@@ -0,0 +1,145 @@
+/*
+ * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __EP_INFO_H__
+#define __EP_INFO_H__
+
+#include <param_header.h>
+
+#define SECURE		0x0
+#define NON_SECURE	0x1
+#define sec_state_is_valid(s) (((s) == SECURE) || ((s) == NON_SECURE))
+
+/*******************************************************************************
+ * Constants that allow assembler code to access members of and the
+ * 'entry_point_info' structure at their correct offsets.
+ ******************************************************************************/
+#define ENTRY_POINT_INFO_PC_OFFSET	0x08
+#ifdef AARCH32
+#define ENTRY_POINT_INFO_ARGS_OFFSET	0x10
+#else
+#define ENTRY_POINT_INFO_ARGS_OFFSET	0x18
+#endif
+
+/* The following are used to set/get image attributes. */
+#define PARAM_EP_SECURITY_MASK		(0x1)
+
+#define GET_SECURITY_STATE(x) (x & PARAM_EP_SECURITY_MASK)
+#define SET_SECURITY_STATE(x, security) \
+			((x) = ((x) & ~PARAM_EP_SECURITY_MASK) | (security))
+
+#define EP_EE_MASK	0x2
+#define EP_EE_LITTLE	0x0
+#define EP_EE_BIG	0x2
+#define EP_GET_EE(x) (x & EP_EE_MASK)
+#define EP_SET_EE(x, ee) ((x) = ((x) & ~EP_EE_MASK) | (ee))
+
+#define EP_ST_MASK	0x4
+#define EP_ST_DISABLE	0x0
+#define EP_ST_ENABLE	0x4
+#define EP_GET_ST(x) (x & EP_ST_MASK)
+#define EP_SET_ST(x, ee) ((x) = ((x) & ~EP_ST_MASK) | (ee))
+
+#define EP_EXE_MASK	0x8
+#define NON_EXECUTABLE	0x0
+#define EXECUTABLE	0x8
+#define EP_GET_EXE(x) (x & EP_EXE_MASK)
+#define EP_SET_EXE(x, ee) ((x) = ((x) & ~EP_EXE_MASK) | (ee))
+
+#define EP_FIRST_EXE_MASK	0x10
+#define EP_FIRST_EXE		0x10
+#define EP_GET_FIRST_EXE(x) ((x) & EP_FIRST_EXE_MASK)
+#define EP_SET_FIRST_EXE(x, ee) ((x) = ((x) & ~EP_FIRST_EXE_MASK) | (ee))
+
+#ifndef __ASSEMBLY__
+
+#include <cassert.h>
+#include <types.h>
+
+typedef struct aapcs64_params {
+	u_register_t arg0;
+	u_register_t arg1;
+	u_register_t arg2;
+	u_register_t arg3;
+	u_register_t arg4;
+	u_register_t arg5;
+	u_register_t arg6;
+	u_register_t arg7;
+} aapcs64_params_t;
+
+typedef struct aapcs32_params {
+	u_register_t arg0;
+	u_register_t arg1;
+	u_register_t arg2;
+	u_register_t arg3;
+} aapcs32_params_t;
+
+/*****************************************************************************
+ * This structure represents the superset of information needed while
+ * switching exception levels. The only two mechanisms to do so are
+ * ERET & SMC. Security state is indicated using bit zero of header
+ * attribute
+ * NOTE: BL1 expects entrypoint followed by spsr at an offset from the start
+ * of this structure defined by the macro `ENTRY_POINT_INFO_PC_OFFSET` while
+ * processing SMC to jump to BL31.
+ *****************************************************************************/
+typedef struct entry_point_info {
+	param_header_t h;
+	uintptr_t pc;
+	uint32_t spsr;
+#ifdef AARCH32
+	aapcs32_params_t args;
+#else
+	aapcs64_params_t args;
+#endif
+} entry_point_info_t;
+
+/*
+ * Compile time assertions related to the 'entry_point_info' structure to
+ * ensure that the assembler and the compiler view of the offsets of
+ * the structure members is the same.
+ */
+CASSERT(ENTRY_POINT_INFO_PC_OFFSET ==
+		__builtin_offsetof(entry_point_info_t, pc), \
+		assert_BL31_pc_offset_mismatch);
+
+CASSERT(ENTRY_POINT_INFO_ARGS_OFFSET == \
+		__builtin_offsetof(entry_point_info_t, args), \
+		assert_BL31_args_offset_mismatch);
+
+CASSERT(sizeof(uintptr_t) ==
+		__builtin_offsetof(entry_point_info_t, spsr) - \
+		__builtin_offsetof(entry_point_info_t, pc), \
+		assert_entrypoint_and_spsr_should_be_adjacent);
+
+#endif /*__ASSEMBLY__*/
+
+#endif /* __EP_INFO_H__ */
+
diff --git a/include/common/param_header.h b/include/common/param_header.h
new file mode 100644
index 0000000..176fc95
--- /dev/null
+++ b/include/common/param_header.h
@@ -0,0 +1,78 @@
+/*
+ * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __PARAM_HEADER_H__
+#define __PARAM_HEADER_H__
+
+/* Param header types */
+#define PARAM_EP		0x01
+#define PARAM_IMAGE_BINARY	0x02
+#define PARAM_BL31		0x03
+#define PARAM_BL_LOAD_INFO	0x04
+#define PARAM_BL_PARAMS		0x05
+#define PARAM_PSCI_LIB_ARGS	0x06
+
+/* Param header version */
+#define VERSION_1	0x01
+#define VERSION_2	0x02
+
+#define SET_PARAM_HEAD(_p, _type, _ver, _attr) do { \
+	(_p)->h.type = (uint8_t)(_type); \
+	(_p)->h.version = (uint8_t)(_ver); \
+	(_p)->h.size = (uint16_t)sizeof(*_p); \
+	(_p)->h.attr = (uint32_t)(_attr) ; \
+	} while (0)
+
+/* Following is used for populating structure members statically. */
+#define SET_STATIC_PARAM_HEAD(_p, _type, _ver, _p_type, _attr)	\
+	._p.h.type = (uint8_t)(_type), \
+	._p.h.version = (uint8_t)(_ver), \
+	._p.h.size = (uint16_t)sizeof(_p_type), \
+	._p.h.attr = (uint32_t)(_attr)
+
+#ifndef __ASSEMBLY__
+
+#include <types.h>
+
+/***************************************************************************
+ * This structure provides version information and the size of the
+ * structure, attributes for the structure it represents
+ ***************************************************************************/
+typedef struct param_header {
+	uint8_t type;		/* type of the structure */
+	uint8_t version;    /* version of this structure */
+	uint16_t size;      /* size of this structure in bytes */
+	uint32_t attr;      /* attributes: unused bits SBZ */
+} param_header_t;
+
+#endif /*__ASSEMBLY__*/
+
+#endif /* __PARAM_HEADER_H__ */
+
diff --git a/include/lib/el3_runtime/context_mgmt.h b/include/lib/el3_runtime/context_mgmt.h
index 676973c..ca868dd 100644
--- a/include/lib/el3_runtime/context_mgmt.h
+++ b/include/lib/el3_runtime/context_mgmt.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2016, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -31,7 +31,9 @@
 #ifndef __CM_H__
 #define __CM_H__
 
+#ifndef AARCH32
 #include <arch.h>
+#endif
 
 /*******************************************************************************
  * Forward declarations
diff --git a/include/lib/psci/psci.h b/include/lib/psci/psci.h
index 34de4c2..fa85e0b 100644
--- a/include/lib/psci/psci.h
+++ b/include/lib/psci/psci.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2016, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -37,6 +37,7 @@
 #if ENABLE_PLAT_COMPAT
 #include <psci_compat.h>
 #endif
+#include <psci_lib.h>		/* To maintain compatibility for SPDs */
 
 /*******************************************************************************
  * Number of power domains whose state this PSCI implementation can track
@@ -311,24 +312,6 @@
 } plat_psci_ops_t;
 
 /*******************************************************************************
- * Optional structure populated by the Secure Payload Dispatcher to be given a
- * chance to perform any bookkeeping before PSCI executes a power management
- * operation. It also allows PSCI to determine certain properties of the SP e.g.
- * migrate capability etc.
- ******************************************************************************/
-typedef struct spd_pm_ops {
-	void (*svc_on)(u_register_t target_cpu);
-	int32_t (*svc_off)(u_register_t __unused);
-	void (*svc_suspend)(u_register_t max_off_pwrlvl);
-	void (*svc_on_finish)(u_register_t __unused);
-	void (*svc_suspend_finish)(u_register_t max_off_pwrlvl);
-	int32_t (*svc_migrate)(u_register_t from_cpu, u_register_t to_cpu);
-	int32_t (*svc_migrate_info)(u_register_t *resident_cpu);
-	void (*svc_system_off)(void);
-	void (*svc_system_reset)(void);
-} spd_pm_ops_t;
-
-/*******************************************************************************
  * Function & Data prototypes
  ******************************************************************************/
 unsigned int psci_version(void);
@@ -357,63 +340,6 @@
  */
 void psci_entrypoint(void) __deprecated;
 
-/*
- * Function prototype for the warmboot entrypoint function which will be
- * programmed in the mailbox by the platform.
- */
-typedef void (*mailbox_entrypoint_t)(void);
-
-/******************************************************************************
- * Structure to pass PSCI Library arguments.
- *****************************************************************************/
-typedef struct psci_lib_args {
-	/* The version information of PSCI Library Interface */
-	param_header_t		h;
-	/* The warm boot entrypoint function */
-	mailbox_entrypoint_t	mailbox_ep;
-} psci_lib_args_t;
-
-/* Helper macro to set the psci_lib_args_t structure at runtime */
-#define SET_PSCI_LIB_ARGS_V1(_p, _entry)	do {			\
-	SET_PARAM_HEAD(_p, PARAM_PSCI_LIB_ARGS, VERSION_1, 0);		\
-	(_p)->mailbox_ep = (_entry);					\
-	} while (0)
-
-/* Helper macro to define the psci_lib_args_t statically */
-#define DEFINE_STATIC_PSCI_LIB_ARGS_V1(_name, _entry)		\
-	static const psci_lib_args_t (_name) = {		\
-		.h.type = (uint8_t)PARAM_PSCI_LIB_ARGS,		\
-		.h.version = (uint8_t)VERSION_1,		\
-		.h.size = (uint16_t)sizeof(_name),		\
-		.h.attr = 0,					\
-		.mailbox_ep = (_entry)				\
-	}
-
-/* Helper macro to verify the pointer to psci_lib_args_t structure */
-#define VERIFY_PSCI_LIB_ARGS_V1(_p)	((_p)			\
-		&& ((_p)->h.type == PARAM_PSCI_LIB_ARGS)	\
-		&& ((_p)->h.version == VERSION_1)		\
-		&& ((_p)->h.size == sizeof(*(_p)))		\
-		&& ((_p)->h.attr == 0)				\
-		&& ((_p)->mailbox_ep))
-
-/******************************************************************************
- * PSCI Library Interfaces
- *****************************************************************************/
-u_register_t psci_smc_handler(uint32_t smc_fid,
-			  u_register_t x1,
-			  u_register_t x2,
-			  u_register_t x3,
-			  u_register_t x4,
-			  void *cookie,
-			  void *handle,
-			  u_register_t flags);
-int psci_setup(const psci_lib_args_t *lib_args);
-void psci_warmboot_entrypoint(void);
-void psci_register_spd_pm_hook(const spd_pm_ops_t *pm);
-void psci_prepare_next_non_secure_ctx(
-			  entry_point_info_t *next_image_info);
-
 #endif /*__ASSEMBLY__*/
 
 #endif /* __PSCI_H__ */
diff --git a/include/lib/psci/psci_lib.h b/include/lib/psci/psci_lib.h
new file mode 100644
index 0000000..2169d6d
--- /dev/null
+++ b/include/lib/psci/psci_lib.h
@@ -0,0 +1,116 @@
+/*
+ * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __PSCI_LIB_H__
+#define __PSCI_LIB_H__
+
+#include <ep_info.h>
+
+#ifndef __ASSEMBLY__
+#include <types.h>
+
+/*******************************************************************************
+ * Optional structure populated by the Secure Payload Dispatcher to be given a
+ * chance to perform any bookkeeping before PSCI executes a power management
+ * operation. It also allows PSCI to determine certain properties of the SP e.g.
+ * migrate capability etc.
+ ******************************************************************************/
+typedef struct spd_pm_ops {
+	void (*svc_on)(u_register_t target_cpu);
+	int32_t (*svc_off)(u_register_t __unused);
+	void (*svc_suspend)(u_register_t max_off_pwrlvl);
+	void (*svc_on_finish)(u_register_t __unused);
+	void (*svc_suspend_finish)(u_register_t max_off_pwrlvl);
+	int32_t (*svc_migrate)(u_register_t from_cpu, u_register_t to_cpu);
+	int32_t (*svc_migrate_info)(u_register_t *resident_cpu);
+	void (*svc_system_off)(void);
+	void (*svc_system_reset)(void);
+} spd_pm_ops_t;
+
+/*
+ * Function prototype for the warmboot entrypoint function which will be
+ * programmed in the mailbox by the platform.
+ */
+typedef void (*mailbox_entrypoint_t)(void);
+
+/******************************************************************************
+ * Structure to pass PSCI Library arguments.
+ *****************************************************************************/
+typedef struct psci_lib_args {
+	/* The version information of PSCI Library Interface */
+	param_header_t		h;
+	/* The warm boot entrypoint function */
+	mailbox_entrypoint_t	mailbox_ep;
+} psci_lib_args_t;
+
+/* Helper macro to set the psci_lib_args_t structure at runtime */
+#define SET_PSCI_LIB_ARGS_V1(_p, _entry)	do {			\
+	SET_PARAM_HEAD(_p, PARAM_PSCI_LIB_ARGS, VERSION_1, 0);		\
+	(_p)->mailbox_ep = (_entry);					\
+	} while (0)
+
+/* Helper macro to define the psci_lib_args_t statically */
+#define DEFINE_STATIC_PSCI_LIB_ARGS_V1(_name, _entry)		\
+	static const psci_lib_args_t (_name) = {		\
+		.h.type = (uint8_t)PARAM_PSCI_LIB_ARGS,		\
+		.h.version = (uint8_t)VERSION_1,		\
+		.h.size = (uint16_t)sizeof(_name),		\
+		.h.attr = 0,					\
+		.mailbox_ep = (_entry)				\
+	}
+
+/* Helper macro to verify the pointer to psci_lib_args_t structure */
+#define VERIFY_PSCI_LIB_ARGS_V1(_p)	((_p)			\
+		&& ((_p)->h.type == PARAM_PSCI_LIB_ARGS)	\
+		&& ((_p)->h.version == VERSION_1)		\
+		&& ((_p)->h.size == sizeof(*(_p)))		\
+		&& ((_p)->h.attr == 0)				\
+		&& ((_p)->mailbox_ep))
+
+/******************************************************************************
+ * PSCI Library Interfaces
+ *****************************************************************************/
+u_register_t psci_smc_handler(uint32_t smc_fid,
+			  u_register_t x1,
+			  u_register_t x2,
+			  u_register_t x3,
+			  u_register_t x4,
+			  void *cookie,
+			  void *handle,
+			  u_register_t flags);
+int psci_setup(const psci_lib_args_t *lib_args);
+void psci_warmboot_entrypoint(void);
+void psci_register_spd_pm_hook(const spd_pm_ops_t *pm);
+void psci_prepare_next_non_secure_ctx(
+			  entry_point_info_t *next_image_info);
+#endif /* __ASSEMBLY__ */
+
+#endif /* __PSCI_LIB_H */
+