diff --git a/include/common/bl_common.h b/include/common/bl_common.h
index 66c20fc..38be628 100644
--- a/include/common/bl_common.h
+++ b/include/common/bl_common.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2016, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -31,9 +31,8 @@
 #ifndef __BL_COMMON_H__
 #define __BL_COMMON_H__
 
-#define SECURE		0x0
-#define NON_SECURE	0x1
-#define sec_state_is_valid(s) (((s) == SECURE) || ((s) == NON_SECURE))
+#include <ep_info.h>
+#include <param_header.h>
 
 #define UP	1
 #define DOWN	0
@@ -45,25 +44,6 @@
 #define TOP	0x1
 #define BOTTOM	!TOP
 
-/*******************************************************************************
- * Constants that allow assembler code to access members of and the
- * 'entry_point_info' structure at their correct offsets.
- ******************************************************************************/
-#define ENTRY_POINT_INFO_PC_OFFSET	0x08
-#ifdef AARCH32
-#define ENTRY_POINT_INFO_ARGS_OFFSET	0x10
-#else
-#define ENTRY_POINT_INFO_ARGS_OFFSET	0x18
-#endif
-
-/* The following are used to set/get image attributes. */
-#define PARAM_EP_SECURITY_MASK		(0x1)
-
-#define GET_SECURITY_STATE(x) (x & PARAM_EP_SECURITY_MASK)
-#define SET_SECURITY_STATE(x, security) \
-			((x) = ((x) & ~PARAM_EP_SECURITY_MASK) | (security))
-
-
 /*
  * The following are used for image state attributes.
  * Image can only be in one of the following state.
@@ -75,59 +55,11 @@
 #define IMAGE_STATE_EXECUTED			4
 #define IMAGE_STATE_INTERRUPTED			5
 
-#define EP_EE_MASK	0x2
-#define EP_EE_LITTLE	0x0
-#define EP_EE_BIG	0x2
-#define EP_GET_EE(x) (x & EP_EE_MASK)
-#define EP_SET_EE(x, ee) ((x) = ((x) & ~EP_EE_MASK) | (ee))
-
-#define EP_ST_MASK	0x4
-#define EP_ST_DISABLE	0x0
-#define EP_ST_ENABLE	0x4
-#define EP_GET_ST(x) (x & EP_ST_MASK)
-#define EP_SET_ST(x, ee) ((x) = ((x) & ~EP_ST_MASK) | (ee))
-
-#define EP_EXE_MASK	0x8
-#define NON_EXECUTABLE	0x0
-#define EXECUTABLE	0x8
-#define EP_GET_EXE(x) (x & EP_EXE_MASK)
-#define EP_SET_EXE(x, ee) ((x) = ((x) & ~EP_EXE_MASK) | (ee))
-
-#define EP_FIRST_EXE_MASK	0x10
-#define EP_FIRST_EXE		0x10
-#define EP_GET_FIRST_EXE(x) ((x) & EP_FIRST_EXE_MASK)
-#define EP_SET_FIRST_EXE(x, ee) ((x) = ((x) & ~EP_FIRST_EXE_MASK) | (ee))
-
-#define PARAM_EP		0x01
-#define PARAM_IMAGE_BINARY	0x02
-#define PARAM_BL31		0x03
-#define PARAM_BL_LOAD_INFO	0x04
-#define PARAM_BL_PARAMS		0x05
-#define PARAM_PSCI_LIB_ARGS	0x06
-
 #define IMAGE_ATTRIB_SKIP_LOADING	0x02
 #define IMAGE_ATTRIB_PLAT_SETUP		0x04
 
-#define VERSION_1	0x01
-#define VERSION_2	0x02
-
 #define INVALID_IMAGE_ID		(0xFFFFFFFF)
 
-#define SET_PARAM_HEAD(_p, _type, _ver, _attr) do { \
-	(_p)->h.type = (uint8_t)(_type); \
-	(_p)->h.version = (uint8_t)(_ver); \
-	(_p)->h.size = (uint16_t)sizeof(*_p); \
-	(_p)->h.attr = (uint32_t)(_attr) ; \
-	} while (0)
-
-/* Following is used for populating structure members statically. */
-#define SET_STATIC_PARAM_HEAD(_p, _type, _ver, _p_type, _attr)	\
-	._p.h.type = (uint8_t)(_type), \
-	._p.h.version = (uint8_t)(_ver), \
-	._p.h.size = (uint16_t)sizeof(_p_type), \
-	._p.h.attr = (uint32_t)(_attr)
-
-
 /*******************************************************************************
  * Constants to indicate type of exception to the common exception handler.
  ******************************************************************************/
@@ -149,10 +81,9 @@
 #define SERROR_AARCH32			0xf
 
 #ifndef __ASSEMBLY__
-#include <cdefs.h> /* For __dead2 */
 #include <cassert.h>
-#include <stdint.h>
 #include <stddef.h>
+#include <stdint.h>
 #include <types.h>
 #include <utils.h> /* To retain compatibility */
 
@@ -185,7 +116,6 @@
 extern uintptr_t __COHERENT_RAM_END__;
 #endif
 
-
 /*******************************************************************************
  * Structure used for telling the next BL how much of a particular type of
  * memory is available for its use and how much is already used.
@@ -199,55 +129,6 @@
 #endif
 } meminfo_t;
 
-typedef struct aapcs64_params {
-	u_register_t arg0;
-	u_register_t arg1;
-	u_register_t arg2;
-	u_register_t arg3;
-	u_register_t arg4;
-	u_register_t arg5;
-	u_register_t arg6;
-	u_register_t arg7;
-} aapcs64_params_t;
-
-typedef struct aapcs32_params {
-	u_register_t arg0;
-	u_register_t arg1;
-	u_register_t arg2;
-	u_register_t arg3;
-} aapcs32_params_t;
-
-/***************************************************************************
- * This structure provides version information and the size of the
- * structure, attributes for the structure it represents
- ***************************************************************************/
-typedef struct param_header {
-	uint8_t type;		/* type of the structure */
-	uint8_t version;    /* version of this structure */
-	uint16_t size;      /* size of this structure in bytes */
-	uint32_t attr;      /* attributes: unused bits SBZ */
-} param_header_t;
-
-/*****************************************************************************
- * This structure represents the superset of information needed while
- * switching exception levels. The only two mechanisms to do so are
- * ERET & SMC. Security state is indicated using bit zero of header
- * attribute
- * NOTE: BL1 expects entrypoint followed by spsr at an offset from the start
- * of this structure defined by the macro `ENTRY_POINT_INFO_PC_OFFSET` while
- * processing SMC to jump to BL31.
- *****************************************************************************/
-typedef struct entry_point_info {
-	param_header_t h;
-	uintptr_t pc;
-	uint32_t spsr;
-#ifdef AARCH32
-	aapcs32_params_t args;
-#else
-	aapcs64_params_t args;
-#endif
-} entry_point_info_t;
-
 /*****************************************************************************
  * Image info binary provides information from the image loader that
  * can be used by the firmware to manage available trusted RAM.
@@ -338,24 +219,6 @@
 
 #endif /* LOAD_IMAGE_V2 */
 
-/*
- * Compile time assertions related to the 'entry_point_info' structure to
- * ensure that the assembler and the compiler view of the offsets of
- * the structure members is the same.
- */
-CASSERT(ENTRY_POINT_INFO_PC_OFFSET ==
-		__builtin_offsetof(entry_point_info_t, pc), \
-		assert_BL31_pc_offset_mismatch);
-
-CASSERT(ENTRY_POINT_INFO_ARGS_OFFSET == \
-		__builtin_offsetof(entry_point_info_t, args), \
-		assert_BL31_args_offset_mismatch);
-
-CASSERT(sizeof(uintptr_t) ==
-		__builtin_offsetof(entry_point_info_t, spsr) - \
-		__builtin_offsetof(entry_point_info_t, pc), \
-		assert_entrypoint_and_spsr_should_be_adjacent);
-
 /*******************************************************************************
  * Function & variable prototypes
  ******************************************************************************/