diff --git a/plat/imx/common/include/sci/sci.h b/plat/imx/common/include/sci/sci.h
new file mode 100644
index 0000000..3dd17ce
--- /dev/null
+++ b/plat/imx/common/include/sci/sci.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef _SC_SCI_H
+#define _SC_SCI_H
+
+/* Defines */
+
+/* Includes */
+
+#include <sci/sci_ipc.h>
+#include <sci/svc/pad/sci_pad_api.h>
+#include <sci/svc/pm/sci_pm_api.h>
+#include <sci/svc/rm/sci_rm_api.h>
+
+#endif /* _SC_SCI_H */
diff --git a/plat/imx/common/include/sci/sci_ipc.h b/plat/imx/common/include/sci/sci_ipc.h
new file mode 100644
index 0000000..c169a79
--- /dev/null
+++ b/plat/imx/common/include/sci/sci_ipc.h
@@ -0,0 +1,67 @@
+/*
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*!
+ * Header file for the IPC implementation.
+ */
+
+#ifndef SC_IPC_H
+#define SC_IPC_H
+
+/* Includes */
+
+#include <sci/sci_types.h>
+
+/* Defines */
+
+/* Types */
+
+/* Functions */
+
+/*!
+ * This function opens an IPC channel.
+ *
+ * @param[out]    ipc         return pointer for ipc handle
+ * @param[in]     id          id of channel to open
+ *
+ * @return Returns an error code (SC_ERR_NONE = success, SC_ERR_IPC
+ *         otherwise).
+ *
+ * The \a id parameter is implementation specific. Could be an MU
+ * address, pointer to a driver path, channel index, etc.
+ */
+sc_err_t sc_ipc_open(sc_ipc_t *ipc, sc_ipc_id_t id);
+
+/*!
+ * This function closes an IPC channel.
+ *
+ * @param[in]     ipc         id of channel to close
+ */
+void sc_ipc_close(sc_ipc_t ipc);
+
+/*!
+ * This function reads a message from an IPC channel.
+ *
+ * @param[in]     ipc         id of channel read from
+ * @param[out]    data        pointer to message buffer to read
+ *
+ * This function will block if no message is available to be read.
+ */
+void sc_ipc_read(sc_ipc_t ipc, void *data);
+
+/*!
+ * This function writes a message to an IPC channel.
+ *
+ * @param[in]     ipc         id of channel to write to
+ * @param[in]     data        pointer to message buffer to write
+ *
+ * This function will block if the outgoing buffer is full.
+ */
+void sc_ipc_write(sc_ipc_t ipc, void *data);
+
+sc_ipc_t ipc_handle;
+
+#endif				/* SC_IPC_H */
diff --git a/plat/imx/common/include/sci/sci_rpc.h b/plat/imx/common/include/sci/sci_rpc.h
new file mode 100644
index 0000000..052f361
--- /dev/null
+++ b/plat/imx/common/include/sci/sci_rpc.h
@@ -0,0 +1,127 @@
+/*
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*!
+ * Header file for the RPC implementation.
+ */
+
+#ifndef SC_RPC_H
+#define SC_RPC_H
+
+/* Includes */
+
+#include <sci/sci_types.h>
+#include <sci/sci_ipc.h>
+#include <stdbool.h>
+
+/* Defines */
+
+#define SC_RPC_VERSION          1U
+
+#define SC_RPC_MAX_MSG          8U
+
+#define RPC_VER(MSG)            ((MSG)->version)
+#define RPC_SIZE(MSG)           ((MSG)->size)
+#define RPC_SVC(MSG)            ((MSG)->svc)
+#define RPC_FUNC(MSG)           ((MSG)->func)
+#define RPC_R8(MSG)             ((MSG)->func)
+#define RPC_I32(MSG, IDX)       ((MSG)->DATA.i32[(IDX) / 4U])
+#define RPC_I16(MSG, IDX)       ((MSG)->DATA.i16[(IDX) / 2U])
+#define RPC_I8(MSG, IDX)        ((MSG)->DATA.i8[(IDX)])
+#define RPC_U32(MSG, IDX)       ((MSG)->DATA.u32[(IDX) / 4U])
+#define RPC_U16(MSG, IDX)       ((MSG)->DATA.u16[(IDX) / 2U])
+#define RPC_U8(MSG, IDX)        ((MSG)->DATA.u8[(IDX)])
+
+#define SC_RPC_SVC_UNKNOWN      0U
+#define SC_RPC_SVC_RETURN       1U
+#define SC_RPC_SVC_PM           2U
+#define SC_RPC_SVC_RM           3U
+#define SC_RPC_SVC_TIMER        5U
+#define SC_RPC_SVC_PAD          6U
+#define SC_RPC_SVC_MISC         7U
+#define SC_RPC_SVC_IRQ          8U
+#define SC_RPC_SVC_ABORT        9U
+
+#define SC_RPC_ASYNC_STATE_RD_START      0U
+#define SC_RPC_ASYNC_STATE_RD_ACTIVE     1U
+#define SC_RPC_ASYNC_STATE_RD_DONE       2U
+#define SC_RPC_ASYNC_STATE_WR_START      3U
+#define SC_RPC_ASYNC_STATE_WR_ACTIVE     4U
+#define SC_RPC_ASYNC_STATE_WR_DONE       5U
+
+#define SC_RPC_MU_GIR_SVC       0x1U
+#define SC_RPC_MU_GIR_DBG       0x8U
+
+/* Types */
+
+typedef uint8_t sc_rpc_svc_t;
+
+typedef struct sc_rpc_msg_s {
+	uint8_t version;
+	uint8_t size;
+	uint8_t svc;
+	uint8_t func;
+	union {
+		int32_t i32[(SC_RPC_MAX_MSG - 1U)];
+		int16_t i16[(SC_RPC_MAX_MSG - 1U) * 2U];
+		int8_t i8[(SC_RPC_MAX_MSG - 1U) * 4U];
+		uint32_t u32[(SC_RPC_MAX_MSG - 1U)];
+		uint16_t u16[(SC_RPC_MAX_MSG - 1U) * 2U];
+		uint8_t u8[(SC_RPC_MAX_MSG - 1U) * 4U];
+	} DATA;
+} sc_rpc_msg_t;
+
+typedef uint8_t sc_rpc_async_state_t;
+
+typedef struct sc_rpc_async_msg_s {
+	sc_rpc_async_state_t state;
+	uint8_t wordIdx;
+	sc_rpc_msg_t msg;
+	uint32_t timeStamp;
+} sc_rpc_async_msg_t;
+
+/* Functions */
+
+/*!
+ * This is an internal function to send an RPC message over an IPC
+ * channel. It is called by client-side SCFW API function shims.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in,out] msg         handle to a message
+ * @param[in]     no_resp     response flag
+ *
+ * If \a no_resp is SC_FALSE then this function waits for a response
+ * and returns the result in \a msg.
+ */
+void sc_call_rpc(sc_ipc_t ipc, sc_rpc_msg_t *msg, bool no_resp);
+
+/*!
+ * This is an internal function to dispath an RPC call that has
+ * arrived via IPC over an MU. It is called by server-side SCFW.
+ *
+ * @param[in]     mu          MU message arrived on
+ * @param[in,out] msg         handle to a message
+ *
+ * The function result is returned in \a msg.
+ */
+void sc_rpc_dispatch(sc_rsrc_t mu, sc_rpc_msg_t *msg);
+
+/*!
+ * This function translates an RPC message and forwards on to the
+ * normal RPC API.  It is used only by hypervisors.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in,out] msg         handle to a message
+ *
+ * This function decodes a message, calls macros to translate the
+ * resources, pads, addresses, partitions, memory regions, etc. and
+ * then forwards on to the hypervisors SCFW API.Return results are
+ * translated back abd placed back into the message to be returned
+ * to the original API.
+ */
+void sc_rpc_xlate(sc_ipc_t ipc, sc_rpc_msg_t *msg);
+
+#endif				/* SC_RPC_H */
diff --git a/plat/imx/common/include/sci/sci_scfw.h b/plat/imx/common/include/sci/sci_scfw.h
new file mode 100644
index 0000000..9d08dad
--- /dev/null
+++ b/plat/imx/common/include/sci/sci_scfw.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef _SC_SCFW_H
+#define _SC_SCFW_H
+
+/* Includes */
+
+#include <types.h>
+
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions                 */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions                 */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions                */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions              */
+
+/*!
+ * This type is used to declare a handle for an IPC communication
+ * channel. Its meaning is specific to the IPC implementation.
+ */
+typedef uint64_t sc_ipc_t;
+
+/*!
+ * This type is used to declare an ID for an IPC communication
+ * channel. For the reference IPC implementation, this ID
+ * selects the base address of the MU used for IPC.
+ */
+typedef uint64_t sc_ipc_id_t;
+
+
+#endif /* _SC_SCFW_H */
+
diff --git a/plat/imx/common/include/sci/sci_types.h b/plat/imx/common/include/sci/sci_types.h
new file mode 100644
index 0000000..3ee5276
--- /dev/null
+++ b/plat/imx/common/include/sci/sci_types.h
@@ -0,0 +1,849 @@
+/*
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*!
+ * Header file containing types used across multiple service APIs.
+ */
+
+#ifndef SC_TYPES_H
+#define SC_TYPES_H
+
+/* Includes */
+
+#include <sci/sci_scfw.h>
+
+/* Defines */
+
+/*!
+ * @name Defines for common frequencies
+ */
+/*@{*/
+#define SC_32KHZ            32768U	/* 32KHz */
+#define SC_10MHZ         10000000U	/* 10MHz */
+#define SC_20MHZ         20000000U	/* 20MHz */
+#define SC_25MHZ         25000000U	/* 25MHz */
+#define SC_27MHZ         27000000U	/* 27MHz */
+#define SC_40MHZ         40000000U	/* 40MHz */
+#define SC_45MHZ         45000000U	/* 45MHz */
+#define SC_50MHZ         50000000U	/* 50MHz */
+#define SC_60MHZ         60000000U	/* 60MHz */
+#define SC_66MHZ         66666666U	/* 66MHz */
+#define SC_74MHZ         74250000U	/* 74.25MHz */
+#define SC_80MHZ         80000000U	/* 80MHz */
+#define SC_83MHZ         83333333U	/* 83MHz */
+#define SC_84MHZ         84375000U	/* 84.37MHz */
+#define SC_100MHZ       100000000U	/* 100MHz */
+#define SC_125MHZ       125000000U	/* 125MHz */
+#define SC_133MHZ       133333333U	/* 133MHz */
+#define SC_135MHZ       135000000U	/* 135MHz */
+#define SC_150MHZ       150000000U	/* 150MHz */
+#define SC_160MHZ       160000000U	/* 160MHz */
+#define SC_166MHZ       166666666U	/* 166MHz */
+#define SC_175MHZ       175000000U	/* 175MHz */
+#define SC_180MHZ       180000000U	/* 180MHz */
+#define SC_200MHZ       200000000U	/* 200MHz */
+#define SC_250MHZ       250000000U	/* 250MHz */
+#define SC_266MHZ       266666666U	/* 266MHz */
+#define SC_300MHZ       300000000U	/* 300MHz */
+#define SC_312MHZ       312500000U	/* 312.5MHZ */
+#define SC_320MHZ       320000000U	/* 320MHz */
+#define SC_325MHZ       325000000U	/* 325MHz */
+#define SC_333MHZ       333333333U	/* 333MHz */
+#define SC_350MHZ       350000000U	/* 350MHz */
+#define SC_372MHZ       372000000U	/* 372MHz */
+#define SC_375MHZ       375000000U	/* 375MHz */
+#define SC_400MHZ       400000000U	/* 400MHz */
+#define SC_500MHZ       500000000U	/* 500MHz */
+#define SC_594MHZ       594000000U	/* 594MHz */
+#define SC_625MHZ       625000000U	/* 625MHz */
+#define SC_640MHZ       640000000U	/* 640MHz */
+#define SC_650MHZ       650000000U	/* 650MHz */
+#define SC_667MHZ       666666667U	/* 667MHz */
+#define SC_675MHZ       675000000U	/* 675MHz */
+#define SC_700MHZ       700000000U	/* 700MHz */
+#define SC_720MHZ       720000000U	/* 720MHz */
+#define SC_750MHZ       750000000U	/* 750MHz */
+#define SC_800MHZ       800000000U	/* 800MHz */
+#define SC_850MHZ       850000000U	/* 850MHz */
+#define SC_900MHZ       900000000U	/* 900MHz */
+#define SC_1000MHZ     1000000000U	/* 1GHz */
+#define SC_1056MHZ     1056000000U	/* 1.056GHz */
+#define SC_1188MHZ     1188000000U	/* 1.188GHz */
+#define SC_1260MHZ     1260000000U	/* 1.26GHz */
+#define SC_1280MHZ     1280000000U	/* 1.28GHz */
+#define SC_1300MHZ     1300000000U	/* 1.3GHz */
+#define SC_1400MHZ     1400000000U	/* 1.4GHz */
+#define SC_1500MHZ     1500000000U	/* 1.5GHz */
+#define SC_1600MHZ     1600000000U	/* 1.6GHz */
+#define SC_1800MHZ     1800000000U	/* 1.8GHz */
+#define SC_2000MHZ     2000000000U	/* 2.0GHz */
+#define SC_2112MHZ     2112000000U	/* 2.12GHz */
+/*@}*/
+
+/*!
+ * @name Defines for 24M related frequencies
+ */
+/*@{*/
+#define SC_8MHZ           8000000U	/* 8MHz */
+#define SC_12MHZ         12000000U	/* 12MHz */
+#define SC_19MHZ         19800000U	/* 19.8MHz */
+#define SC_24MHZ         24000000U	/* 24MHz */
+#define SC_48MHZ         48000000U	/* 48MHz */
+#define SC_120MHZ       120000000U	/* 120MHz */
+#define SC_132MHZ       132000000U	/* 132MHz */
+#define SC_144MHZ       144000000U	/* 144MHz */
+#define SC_192MHZ       192000000U	/* 192MHz */
+#define SC_211MHZ       211200000U	/* 211.2MHz */
+#define SC_240MHZ       240000000U	/* 240MHz */
+#define SC_264MHZ       264000000U	/* 264MHz */
+#define SC_352MHZ       352000000U	/* 352MHz */
+#define SC_360MHZ       360000000U	/* 360MHz */
+#define SC_384MHZ       384000000U	/* 384MHz */
+#define SC_396MHZ       396000000U	/* 396MHz */
+#define SC_432MHZ       432000000U	/* 432MHz */
+#define SC_480MHZ       480000000U	/* 480MHz */
+#define SC_600MHZ       600000000U	/* 600MHz */
+#define SC_744MHZ       744000000U	/* 744MHz */
+#define SC_792MHZ       792000000U	/* 792MHz */
+#define SC_864MHZ       864000000U	/* 864MHz */
+#define SC_960MHZ       960000000U	/* 960MHz */
+#define SC_1056MHZ     1056000000U	/* 1056MHz */
+#define SC_1200MHZ     1200000000U	/* 1.2GHz */
+#define SC_1464MHZ     1464000000U	/* 1.464GHz */
+#define SC_2400MHZ     2400000000U	/* 2.4GHz */
+/*@}*/
+
+/*!
+ * @name Defines for A/V related frequencies
+ */
+/*@{*/
+#define SC_62MHZ         62937500U	/* 62.9375MHz */
+#define SC_755MHZ       755250000U	/* 755.25MHz */
+/*@}*/
+
+/*!
+ * @name Defines for type widths
+ */
+/*@{*/
+#define SC_FADDR_W      36U	/* Width of sc_faddr_t */
+#define SC_BOOL_W       1U	/* Width of sc_bool_t */
+#define SC_ERR_W        4U	/* Width of sc_err_t */
+#define SC_RSRC_W       10U	/* Width of sc_rsrc_t */
+#define SC_CTRL_W       6U	/* Width of sc_ctrl_t */
+/*@}*/
+
+/*!
+ * @name Defines for sc_bool_t
+ */
+/*@{*/
+#define SC_FALSE        ((sc_bool_t) 0U)	/* True */
+#define SC_TRUE         ((sc_bool_t) 1U)	/* False */
+/*@}*/
+
+/*!
+ * @name Defines for sc_err_t.
+ */
+/*@{*/
+#define SC_ERR_NONE         0U	/* Success */
+#define SC_ERR_VERSION      1U	/* Incompatible API version */
+#define SC_ERR_CONFIG       2U	/* Configuration error */
+#define SC_ERR_PARM         3U	/* Bad parameter */
+#define SC_ERR_NOACCESS     4U	/* Permission error (no access) */
+#define SC_ERR_LOCKED       5U	/* Permission error (locked) */
+#define SC_ERR_UNAVAILABLE  6U	/* Unavailable (out of resources) */
+#define SC_ERR_NOTFOUND     7U	/* Not found */
+#define SC_ERR_NOPOWER      8U	/* No power */
+#define SC_ERR_IPC          9U	/* Generic IPC error */
+#define SC_ERR_BUSY         10U	/* Resource is currently busy/active */
+#define SC_ERR_FAIL         11U	/* General I/O failure */
+#define SC_ERR_LAST         12U
+/*@}*/
+
+/*!
+ * @name Defines for sc_rsrc_t.
+ */
+/*@{*/
+#define SC_R_A53                  0U
+#define SC_R_A53_0                1U
+#define SC_R_A53_1                2U
+#define SC_R_A53_2                3U
+#define SC_R_A53_3                4U
+#define SC_R_A72                  5U
+#define SC_R_A72_0                6U
+#define SC_R_A72_1                7U
+#define SC_R_A72_2                8U
+#define SC_R_A72_3                9U
+#define SC_R_CCI                  10U
+#define SC_R_DB                   11U
+#define SC_R_DRC_0                12U
+#define SC_R_DRC_1                13U
+#define SC_R_GIC_SMMU             14U
+#define SC_R_IRQSTR_M4_0          15U
+#define SC_R_IRQSTR_M4_1          16U
+#define SC_R_SMMU                 17U
+#define SC_R_GIC                  18U
+#define SC_R_DC_0_BLIT0           19U
+#define SC_R_DC_0_BLIT1           20U
+#define SC_R_DC_0_BLIT2           21U
+#define SC_R_DC_0_BLIT_OUT        22U
+#define SC_R_DC_0_CAPTURE0        23U
+#define SC_R_DC_0_CAPTURE1        24U
+#define SC_R_DC_0_WARP            25U
+#define SC_R_DC_0_INTEGRAL0       26U
+#define SC_R_DC_0_INTEGRAL1       27U
+#define SC_R_DC_0_VIDEO0          28U
+#define SC_R_DC_0_VIDEO1          29U
+#define SC_R_DC_0_FRAC0           30U
+#define SC_R_DC_0_FRAC1           31U
+#define SC_R_DC_0                 32U
+#define SC_R_GPU_2_PID0           33U
+#define SC_R_DC_0_PLL_0           34U
+#define SC_R_DC_0_PLL_1           35U
+#define SC_R_DC_1_BLIT0           36U
+#define SC_R_DC_1_BLIT1           37U
+#define SC_R_DC_1_BLIT2           38U
+#define SC_R_DC_1_BLIT_OUT        39U
+#define SC_R_DC_1_CAPTURE0        40U
+#define SC_R_DC_1_CAPTURE1        41U
+#define SC_R_DC_1_WARP            42U
+#define SC_R_DC_1_INTEGRAL0       43U
+#define SC_R_DC_1_INTEGRAL1       44U
+#define SC_R_DC_1_VIDEO0          45U
+#define SC_R_DC_1_VIDEO1          46U
+#define SC_R_DC_1_FRAC0           47U
+#define SC_R_DC_1_FRAC1           48U
+#define SC_R_DC_1                 49U
+#define SC_R_GPU_3_PID0           50U
+#define SC_R_DC_1_PLL_0           51U
+#define SC_R_DC_1_PLL_1           52U
+#define SC_R_SPI_0                53U
+#define SC_R_SPI_1                54U
+#define SC_R_SPI_2                55U
+#define SC_R_SPI_3                56U
+#define SC_R_UART_0               57U
+#define SC_R_UART_1               58U
+#define SC_R_UART_2               59U
+#define SC_R_UART_3               60U
+#define SC_R_UART_4               61U
+#define SC_R_EMVSIM_0             62U
+#define SC_R_EMVSIM_1             63U
+#define SC_R_DMA_0_CH0            64U
+#define SC_R_DMA_0_CH1            65U
+#define SC_R_DMA_0_CH2            66U
+#define SC_R_DMA_0_CH3            67U
+#define SC_R_DMA_0_CH4            68U
+#define SC_R_DMA_0_CH5            69U
+#define SC_R_DMA_0_CH6            70U
+#define SC_R_DMA_0_CH7            71U
+#define SC_R_DMA_0_CH8            72U
+#define SC_R_DMA_0_CH9            73U
+#define SC_R_DMA_0_CH10           74U
+#define SC_R_DMA_0_CH11           75U
+#define SC_R_DMA_0_CH12           76U
+#define SC_R_DMA_0_CH13           77U
+#define SC_R_DMA_0_CH14           78U
+#define SC_R_DMA_0_CH15           79U
+#define SC_R_DMA_0_CH16           80U
+#define SC_R_DMA_0_CH17           81U
+#define SC_R_DMA_0_CH18           82U
+#define SC_R_DMA_0_CH19           83U
+#define SC_R_DMA_0_CH20           84U
+#define SC_R_DMA_0_CH21           85U
+#define SC_R_DMA_0_CH22           86U
+#define SC_R_DMA_0_CH23           87U
+#define SC_R_DMA_0_CH24           88U
+#define SC_R_DMA_0_CH25           89U
+#define SC_R_DMA_0_CH26           90U
+#define SC_R_DMA_0_CH27           91U
+#define SC_R_DMA_0_CH28           92U
+#define SC_R_DMA_0_CH29           93U
+#define SC_R_DMA_0_CH30           94U
+#define SC_R_DMA_0_CH31           95U
+#define SC_R_I2C_0                96U
+#define SC_R_I2C_1                97U
+#define SC_R_I2C_2                98U
+#define SC_R_I2C_3                99U
+#define SC_R_I2C_4                100U
+#define SC_R_ADC_0                101U
+#define SC_R_ADC_1                102U
+#define SC_R_FTM_0                103U
+#define SC_R_FTM_1                104U
+#define SC_R_CAN_0                105U
+#define SC_R_CAN_1                106U
+#define SC_R_CAN_2                107U
+#define SC_R_DMA_1_CH0            108U
+#define SC_R_DMA_1_CH1            109U
+#define SC_R_DMA_1_CH2            110U
+#define SC_R_DMA_1_CH3            111U
+#define SC_R_DMA_1_CH4            112U
+#define SC_R_DMA_1_CH5            113U
+#define SC_R_DMA_1_CH6            114U
+#define SC_R_DMA_1_CH7            115U
+#define SC_R_DMA_1_CH8            116U
+#define SC_R_DMA_1_CH9            117U
+#define SC_R_DMA_1_CH10           118U
+#define SC_R_DMA_1_CH11           119U
+#define SC_R_DMA_1_CH12           120U
+#define SC_R_DMA_1_CH13           121U
+#define SC_R_DMA_1_CH14           122U
+#define SC_R_DMA_1_CH15           123U
+#define SC_R_DMA_1_CH16           124U
+#define SC_R_DMA_1_CH17           125U
+#define SC_R_DMA_1_CH18           126U
+#define SC_R_DMA_1_CH19           127U
+#define SC_R_DMA_1_CH20           128U
+#define SC_R_DMA_1_CH21           129U
+#define SC_R_DMA_1_CH22           130U
+#define SC_R_DMA_1_CH23           131U
+#define SC_R_DMA_1_CH24           132U
+#define SC_R_DMA_1_CH25           133U
+#define SC_R_DMA_1_CH26           134U
+#define SC_R_DMA_1_CH27           135U
+#define SC_R_DMA_1_CH28           136U
+#define SC_R_DMA_1_CH29           137U
+#define SC_R_DMA_1_CH30           138U
+#define SC_R_DMA_1_CH31           139U
+#define SC_R_UNUSED1              140U
+#define SC_R_UNUSED2              141U
+#define SC_R_UNUSED3              142U
+#define SC_R_UNUSED4              143U
+#define SC_R_GPU_0_PID0           144U
+#define SC_R_GPU_0_PID1           145U
+#define SC_R_GPU_0_PID2           146U
+#define SC_R_GPU_0_PID3           147U
+#define SC_R_GPU_1_PID0           148U
+#define SC_R_GPU_1_PID1           149U
+#define SC_R_GPU_1_PID2           150U
+#define SC_R_GPU_1_PID3           151U
+#define SC_R_PCIE_A               152U
+#define SC_R_SERDES_0             153U
+#define SC_R_MATCH_0              154U
+#define SC_R_MATCH_1              155U
+#define SC_R_MATCH_2              156U
+#define SC_R_MATCH_3              157U
+#define SC_R_MATCH_4              158U
+#define SC_R_MATCH_5              159U
+#define SC_R_MATCH_6              160U
+#define SC_R_MATCH_7              161U
+#define SC_R_MATCH_8              162U
+#define SC_R_MATCH_9              163U
+#define SC_R_MATCH_10             164U
+#define SC_R_MATCH_11             165U
+#define SC_R_MATCH_12             166U
+#define SC_R_MATCH_13             167U
+#define SC_R_MATCH_14             168U
+#define SC_R_PCIE_B               169U
+#define SC_R_SATA_0               170U
+#define SC_R_SERDES_1             171U
+#define SC_R_HSIO_GPIO            172U
+#define SC_R_MATCH_15             173U
+#define SC_R_MATCH_16             174U
+#define SC_R_MATCH_17             175U
+#define SC_R_MATCH_18             176U
+#define SC_R_MATCH_19             177U
+#define SC_R_MATCH_20             178U
+#define SC_R_MATCH_21             179U
+#define SC_R_MATCH_22             180U
+#define SC_R_MATCH_23             181U
+#define SC_R_MATCH_24             182U
+#define SC_R_MATCH_25             183U
+#define SC_R_MATCH_26             184U
+#define SC_R_MATCH_27             185U
+#define SC_R_MATCH_28             186U
+#define SC_R_LCD_0                187U
+#define SC_R_LCD_0_PWM_0          188U
+#define SC_R_LCD_0_I2C_0          189U
+#define SC_R_LCD_0_I2C_1          190U
+#define SC_R_PWM_0                191U
+#define SC_R_PWM_1                192U
+#define SC_R_PWM_2                193U
+#define SC_R_PWM_3                194U
+#define SC_R_PWM_4                195U
+#define SC_R_PWM_5                196U
+#define SC_R_PWM_6                197U
+#define SC_R_PWM_7                198U
+#define SC_R_GPIO_0               199U
+#define SC_R_GPIO_1               200U
+#define SC_R_GPIO_2               201U
+#define SC_R_GPIO_3               202U
+#define SC_R_GPIO_4               203U
+#define SC_R_GPIO_5               204U
+#define SC_R_GPIO_6               205U
+#define SC_R_GPIO_7               206U
+#define SC_R_GPT_0                207U
+#define SC_R_GPT_1                208U
+#define SC_R_GPT_2                209U
+#define SC_R_GPT_3                210U
+#define SC_R_GPT_4                211U
+#define SC_R_KPP                  212U
+#define SC_R_MU_0A                213U
+#define SC_R_MU_1A                214U
+#define SC_R_MU_2A                215U
+#define SC_R_MU_3A                216U
+#define SC_R_MU_4A                217U
+#define SC_R_MU_5A                218U
+#define SC_R_MU_6A                219U
+#define SC_R_MU_7A                220U
+#define SC_R_MU_8A                221U
+#define SC_R_MU_9A                222U
+#define SC_R_MU_10A               223U
+#define SC_R_MU_11A               224U
+#define SC_R_MU_12A               225U
+#define SC_R_MU_13A               226U
+#define SC_R_MU_5B                227U
+#define SC_R_MU_6B                228U
+#define SC_R_MU_7B                229U
+#define SC_R_MU_8B                230U
+#define SC_R_MU_9B                231U
+#define SC_R_MU_10B               232U
+#define SC_R_MU_11B               233U
+#define SC_R_MU_12B               234U
+#define SC_R_MU_13B               235U
+#define SC_R_ROM_0                236U
+#define SC_R_FSPI_0               237U
+#define SC_R_FSPI_1               238U
+#define SC_R_IEE                  239U
+#define SC_R_IEE_R0               240U
+#define SC_R_IEE_R1               241U
+#define SC_R_IEE_R2               242U
+#define SC_R_IEE_R3               243U
+#define SC_R_IEE_R4               244U
+#define SC_R_IEE_R5               245U
+#define SC_R_IEE_R6               246U
+#define SC_R_IEE_R7               247U
+#define SC_R_SDHC_0               248U
+#define SC_R_SDHC_1               249U
+#define SC_R_SDHC_2               250U
+#define SC_R_ENET_0               251U
+#define SC_R_ENET_1               252U
+#define SC_R_MLB_0                253U
+#define SC_R_DMA_2_CH0            254U
+#define SC_R_DMA_2_CH1            255U
+#define SC_R_DMA_2_CH2            256U
+#define SC_R_DMA_2_CH3            257U
+#define SC_R_DMA_2_CH4            258U
+#define SC_R_USB_0                259U
+#define SC_R_USB_1                260U
+#define SC_R_USB_0_PHY            261U
+#define SC_R_USB_2                262U
+#define SC_R_USB_2_PHY            263U
+#define SC_R_DTCP                 264U
+#define SC_R_NAND                 265U
+#define SC_R_LVDS_0               266U
+#define SC_R_LVDS_0_PWM_0         267U
+#define SC_R_LVDS_0_I2C_0         268U
+#define SC_R_LVDS_0_I2C_1         269U
+#define SC_R_LVDS_1               270U
+#define SC_R_LVDS_1_PWM_0         271U
+#define SC_R_LVDS_1_I2C_0         272U
+#define SC_R_LVDS_1_I2C_1         273U
+#define SC_R_LVDS_2               274U
+#define SC_R_LVDS_2_PWM_0         275U
+#define SC_R_LVDS_2_I2C_0         276U
+#define SC_R_LVDS_2_I2C_1         277U
+#define SC_R_M4_0_PID0            278U
+#define SC_R_M4_0_PID1            279U
+#define SC_R_M4_0_PID2            280U
+#define SC_R_M4_0_PID3            281U
+#define SC_R_M4_0_PID4            282U
+#define SC_R_M4_0_RGPIO           283U
+#define SC_R_M4_0_SEMA42          284U
+#define SC_R_M4_0_TPM             285U
+#define SC_R_M4_0_PIT             286U
+#define SC_R_M4_0_UART            287U
+#define SC_R_M4_0_I2C             288U
+#define SC_R_M4_0_INTMUX          289U
+#define SC_R_M4_0_SIM             290U
+#define SC_R_M4_0_WDOG            291U
+#define SC_R_M4_0_MU_0B           292U
+#define SC_R_M4_0_MU_0A0          293U
+#define SC_R_M4_0_MU_0A1          294U
+#define SC_R_M4_0_MU_0A2          295U
+#define SC_R_M4_0_MU_0A3          296U
+#define SC_R_M4_0_MU_1A           297U
+#define SC_R_M4_1_PID0            298U
+#define SC_R_M4_1_PID1            299U
+#define SC_R_M4_1_PID2            300U
+#define SC_R_M4_1_PID3            301U
+#define SC_R_M4_1_PID4            302U
+#define SC_R_M4_1_RGPIO           303U
+#define SC_R_M4_1_SEMA42          304U
+#define SC_R_M4_1_TPM             305U
+#define SC_R_M4_1_PIT             306U
+#define SC_R_M4_1_UART            307U
+#define SC_R_M4_1_I2C             308U
+#define SC_R_M4_1_INTMUX          309U
+#define SC_R_M4_1_SIM             310U
+#define SC_R_M4_1_WDOG            311U
+#define SC_R_M4_1_MU_0B           312U
+#define SC_R_M4_1_MU_0A0          313U
+#define SC_R_M4_1_MU_0A1          314U
+#define SC_R_M4_1_MU_0A2          315U
+#define SC_R_M4_1_MU_0A3          316U
+#define SC_R_M4_1_MU_1A           317U
+#define SC_R_SAI_0                318U
+#define SC_R_SAI_1                319U
+#define SC_R_SAI_2                320U
+#define SC_R_IRQSTR_SCU2          321U
+#define SC_R_IRQSTR_DSP           322U
+#define SC_R_UNUSED5              323U
+#define SC_R_OCRAM                324U
+#define SC_R_AUDIO_PLL_0          325U
+#define SC_R_PI_0                 326U
+#define SC_R_PI_0_PWM_0           327U
+#define SC_R_PI_0_PWM_1           328U
+#define SC_R_PI_0_I2C_0           329U
+#define SC_R_PI_0_PLL             330U
+#define SC_R_PI_1                 331U
+#define SC_R_PI_1_PWM_0           332U
+#define SC_R_PI_1_PWM_1           333U
+#define SC_R_PI_1_I2C_0           334U
+#define SC_R_PI_1_PLL             335U
+#define SC_R_SC_PID0              336U
+#define SC_R_SC_PID1              337U
+#define SC_R_SC_PID2              338U
+#define SC_R_SC_PID3              339U
+#define SC_R_SC_PID4              340U
+#define SC_R_SC_SEMA42            341U
+#define SC_R_SC_TPM               342U
+#define SC_R_SC_PIT               343U
+#define SC_R_SC_UART              344U
+#define SC_R_SC_I2C               345U
+#define SC_R_SC_MU_0B             346U
+#define SC_R_SC_MU_0A0            347U
+#define SC_R_SC_MU_0A1            348U
+#define SC_R_SC_MU_0A2            349U
+#define SC_R_SC_MU_0A3            350U
+#define SC_R_SC_MU_1A             351U
+#define SC_R_SYSCNT_RD            352U
+#define SC_R_SYSCNT_CMP           353U
+#define SC_R_DEBUG                354U
+#define SC_R_SYSTEM               355U
+#define SC_R_SNVS                 356U
+#define SC_R_OTP                  357U
+#define SC_R_VPU_PID0             358U
+#define SC_R_VPU_PID1             359U
+#define SC_R_VPU_PID2             360U
+#define SC_R_VPU_PID3             361U
+#define SC_R_VPU_PID4             362U
+#define SC_R_VPU_PID5             363U
+#define SC_R_VPU_PID6             364U
+#define SC_R_VPU_PID7             365U
+#define SC_R_VPU_UART             366U
+#define SC_R_VPUCORE              367U
+#define SC_R_VPUCORE_0            368U
+#define SC_R_VPUCORE_1            369U
+#define SC_R_VPUCORE_2            370U
+#define SC_R_VPUCORE_3            371U
+#define SC_R_DMA_4_CH0            372U
+#define SC_R_DMA_4_CH1            373U
+#define SC_R_DMA_4_CH2            374U
+#define SC_R_DMA_4_CH3            375U
+#define SC_R_DMA_4_CH4            376U
+#define SC_R_ISI_CH0              377U
+#define SC_R_ISI_CH1              378U
+#define SC_R_ISI_CH2              379U
+#define SC_R_ISI_CH3              380U
+#define SC_R_ISI_CH4              381U
+#define SC_R_ISI_CH5              382U
+#define SC_R_ISI_CH6              383U
+#define SC_R_ISI_CH7              384U
+#define SC_R_MJPEG_DEC_S0         385U
+#define SC_R_MJPEG_DEC_S1         386U
+#define SC_R_MJPEG_DEC_S2         387U
+#define SC_R_MJPEG_DEC_S3         388U
+#define SC_R_MJPEG_ENC_S0         389U
+#define SC_R_MJPEG_ENC_S1         390U
+#define SC_R_MJPEG_ENC_S2         391U
+#define SC_R_MJPEG_ENC_S3         392U
+#define SC_R_MIPI_0               393U
+#define SC_R_MIPI_0_PWM_0         394U
+#define SC_R_MIPI_0_I2C_0         395U
+#define SC_R_MIPI_0_I2C_1         396U
+#define SC_R_MIPI_1               397U
+#define SC_R_MIPI_1_PWM_0         398U
+#define SC_R_MIPI_1_I2C_0         399U
+#define SC_R_MIPI_1_I2C_1         400U
+#define SC_R_CSI_0                401U
+#define SC_R_CSI_0_PWM_0          402U
+#define SC_R_CSI_0_I2C_0          403U
+#define SC_R_CSI_1                404U
+#define SC_R_CSI_1_PWM_0          405U
+#define SC_R_CSI_1_I2C_0          406U
+#define SC_R_HDMI                 407U
+#define SC_R_HDMI_I2S             408U
+#define SC_R_HDMI_I2C_0           409U
+#define SC_R_HDMI_PLL_0           410U
+#define SC_R_HDMI_RX              411U
+#define SC_R_HDMI_RX_BYPASS       412U
+#define SC_R_HDMI_RX_I2C_0        413U
+#define SC_R_ASRC_0               414U
+#define SC_R_ESAI_0               415U
+#define SC_R_SPDIF_0              416U
+#define SC_R_SPDIF_1              417U
+#define SC_R_SAI_3                418U
+#define SC_R_SAI_4                419U
+#define SC_R_SAI_5                420U
+#define SC_R_GPT_5                421U
+#define SC_R_GPT_6                422U
+#define SC_R_GPT_7                423U
+#define SC_R_GPT_8                424U
+#define SC_R_GPT_9                425U
+#define SC_R_GPT_10               426U
+#define SC_R_DMA_2_CH5            427U
+#define SC_R_DMA_2_CH6            428U
+#define SC_R_DMA_2_CH7            429U
+#define SC_R_DMA_2_CH8            430U
+#define SC_R_DMA_2_CH9            431U
+#define SC_R_DMA_2_CH10           432U
+#define SC_R_DMA_2_CH11           433U
+#define SC_R_DMA_2_CH12           434U
+#define SC_R_DMA_2_CH13           435U
+#define SC_R_DMA_2_CH14           436U
+#define SC_R_DMA_2_CH15           437U
+#define SC_R_DMA_2_CH16           438U
+#define SC_R_DMA_2_CH17           439U
+#define SC_R_DMA_2_CH18           440U
+#define SC_R_DMA_2_CH19           441U
+#define SC_R_DMA_2_CH20           442U
+#define SC_R_DMA_2_CH21           443U
+#define SC_R_DMA_2_CH22           444U
+#define SC_R_DMA_2_CH23           445U
+#define SC_R_DMA_2_CH24           446U
+#define SC_R_DMA_2_CH25           447U
+#define SC_R_DMA_2_CH26           448U
+#define SC_R_DMA_2_CH27           449U
+#define SC_R_DMA_2_CH28           450U
+#define SC_R_DMA_2_CH29           451U
+#define SC_R_DMA_2_CH30           452U
+#define SC_R_DMA_2_CH31           453U
+#define SC_R_ASRC_1               454U
+#define SC_R_ESAI_1               455U
+#define SC_R_SAI_6                456U
+#define SC_R_SAI_7                457U
+#define SC_R_AMIX                 458U
+#define SC_R_MQS_0                459U
+#define SC_R_DMA_3_CH0            460U
+#define SC_R_DMA_3_CH1            461U
+#define SC_R_DMA_3_CH2            462U
+#define SC_R_DMA_3_CH3            463U
+#define SC_R_DMA_3_CH4            464U
+#define SC_R_DMA_3_CH5            465U
+#define SC_R_DMA_3_CH6            466U
+#define SC_R_DMA_3_CH7            467U
+#define SC_R_DMA_3_CH8            468U
+#define SC_R_DMA_3_CH9            469U
+#define SC_R_DMA_3_CH10           470U
+#define SC_R_DMA_3_CH11           471U
+#define SC_R_DMA_3_CH12           472U
+#define SC_R_DMA_3_CH13           473U
+#define SC_R_DMA_3_CH14           474U
+#define SC_R_DMA_3_CH15           475U
+#define SC_R_DMA_3_CH16           476U
+#define SC_R_DMA_3_CH17           477U
+#define SC_R_DMA_3_CH18           478U
+#define SC_R_DMA_3_CH19           479U
+#define SC_R_DMA_3_CH20           480U
+#define SC_R_DMA_3_CH21           481U
+#define SC_R_DMA_3_CH22           482U
+#define SC_R_DMA_3_CH23           483U
+#define SC_R_DMA_3_CH24           484U
+#define SC_R_DMA_3_CH25           485U
+#define SC_R_DMA_3_CH26           486U
+#define SC_R_DMA_3_CH27           487U
+#define SC_R_DMA_3_CH28           488U
+#define SC_R_DMA_3_CH29           489U
+#define SC_R_DMA_3_CH30           490U
+#define SC_R_DMA_3_CH31           491U
+#define SC_R_AUDIO_PLL_1          492U
+#define SC_R_AUDIO_CLK_0          493U
+#define SC_R_AUDIO_CLK_1          494U
+#define SC_R_MCLK_OUT_0           495U
+#define SC_R_MCLK_OUT_1           496U
+#define SC_R_PMIC_0               497U
+#define SC_R_PMIC_1               498U
+#define SC_R_SECO                 499U
+#define SC_R_CAAM_JR1             500U
+#define SC_R_CAAM_JR2             501U
+#define SC_R_CAAM_JR3             502U
+#define SC_R_SECO_MU_2            503U
+#define SC_R_SECO_MU_3            504U
+#define SC_R_SECO_MU_4            505U
+#define SC_R_HDMI_RX_PWM_0        506U
+#define SC_R_A35                  507U
+#define SC_R_A35_0                508U
+#define SC_R_A35_1                509U
+#define SC_R_A35_2                510U
+#define SC_R_A35_3                511U
+#define SC_R_DSP                  512U
+#define SC_R_DSP_RAM              513U
+#define SC_R_CAAM_JR1_OUT         514U
+#define SC_R_CAAM_JR2_OUT         515U
+#define SC_R_CAAM_JR3_OUT         516U
+#define SC_R_VPU_DEC_0            517U
+#define SC_R_VPU_ENC_0            518U
+#define SC_R_CAAM_JR0             519U
+#define SC_R_CAAM_JR0_OUT         520U
+#define SC_R_PMIC_2               521U
+#define SC_R_DBLOGIC              522U
+#define SC_R_HDMI_PLL_1           523U
+#define SC_R_BOARD_R0             524U
+#define SC_R_BOARD_R1             525U
+#define SC_R_BOARD_R2             526U
+#define SC_R_BOARD_R3             527U
+#define SC_R_BOARD_R4             528U
+#define SC_R_BOARD_R5             529U
+#define SC_R_BOARD_R6             530U
+#define SC_R_BOARD_R7             531U
+#define SC_R_MJPEG_DEC_MP         532U
+#define SC_R_MJPEG_ENC_MP         533U
+#define SC_R_VPU_TS_0             534U
+#define SC_R_VPU_MU_0             535U
+#define SC_R_VPU_MU_1             536U
+#define SC_R_VPU_MU_2             537U
+#define SC_R_VPU_MU_3             538U
+#define SC_R_VPU_ENC_1            539U
+#define SC_R_VPU                  540U
+#define SC_R_LAST                 541U
+#define SC_R_ALL                  ((sc_rsrc_t) UINT16_MAX)	/* All resources */
+/*@}*/
+
+/* NOTE - please add by replacing some of the UNUSED from above! */
+
+/*!
+ * Defnes for sc_ctrl_t.
+ */
+#define SC_C_TEMP                       0U
+#define SC_C_TEMP_HI                    1U
+#define SC_C_TEMP_LOW                   2U
+#define SC_C_PXL_LINK_MST1_ADDR         3U
+#define SC_C_PXL_LINK_MST2_ADDR         4U
+#define SC_C_PXL_LINK_MST_ENB           5U
+#define SC_C_PXL_LINK_MST1_ENB          6U
+#define SC_C_PXL_LINK_MST2_ENB          7U
+#define SC_C_PXL_LINK_SLV1_ADDR         8U
+#define SC_C_PXL_LINK_SLV2_ADDR         9U
+#define SC_C_PXL_LINK_MST_VLD           10U
+#define SC_C_PXL_LINK_MST1_VLD          11U
+#define SC_C_PXL_LINK_MST2_VLD          12U
+#define SC_C_SINGLE_MODE                13U
+#define SC_C_ID                         14U
+#define SC_C_PXL_CLK_POLARITY           15U
+#define SC_C_LINESTATE                  16U
+#define SC_C_PCIE_G_RST                 17U
+#define SC_C_PCIE_BUTTON_RST            18U
+#define SC_C_PCIE_PERST                 19U
+#define SC_C_PHY_RESET                  20U
+#define SC_C_PXL_LINK_RATE_CORRECTION   21U
+#define SC_C_PANIC                      22U
+#define SC_C_PRIORITY_GROUP             23U
+#define SC_C_TXCLK                      24U
+#define SC_C_CLKDIV                     25U
+#define SC_C_DISABLE_50                 26U
+#define SC_C_DISABLE_125                27U
+#define SC_C_SEL_125                    28U
+#define SC_C_MODE                       29U
+#define SC_C_SYNC_CTRL0                 30U
+#define SC_C_KACHUNK_CNT                31U
+#define SC_C_KACHUNK_SEL                32U
+#define SC_C_SYNC_CTRL1                 33U
+#define SC_C_DPI_RESET                  34U
+#define SC_C_MIPI_RESET                 35U
+#define SC_C_DUAL_MODE                  36U
+#define SC_C_VOLTAGE                    37U
+#define SC_C_PXL_LINK_SEL               38U
+#define SC_C_OFS_SEL                    39U
+#define SC_C_OFS_AUDIO                  40U
+#define SC_C_OFS_PERIPH                 41U
+#define SC_C_OFS_IRQ                    42U
+#define SC_C_RST0                       43U
+#define SC_C_RST1                       44U
+#define SC_C_SEL0                       45U
+#define SC_C_LAST                       46U
+
+#define SC_P_ALL        ((sc_pad_t) UINT16_MAX)	/* All pads */
+
+/* Types */
+
+/*!
+ * This type is used to store a boolean
+ */
+typedef uint8_t sc_bool_t;
+
+/*!
+ * This type is used to store a system (full-size) address.
+ */
+typedef uint64_t sc_faddr_t;
+
+/*!
+ * This type is used to indicate error response for most functions.
+ */
+typedef uint8_t sc_err_t;
+
+/*!
+ * This type is used to indicate a resource. Resources include peripherals
+ * and bus masters (but not memory regions). Note items from list should
+ * never be changed or removed (only added to at the end of the list).
+ */
+typedef uint16_t sc_rsrc_t;
+
+/*!
+ * This type is used to indicate a control.
+ */
+typedef uint8_t sc_ctrl_t;
+
+/*!
+ * This type is used to indicate a pad. Valid values are SoC specific.
+ *
+ * Refer to the SoC [Pad List](@ref PADS) for valid pad values.
+ */
+typedef uint16_t sc_pad_t;
+
+/* Extra documentation of standard types */
+
+#ifdef DOXYGEN
+    /*!
+     * Type used to declare an 8-bit integer.
+     */
+typedef __INT8_TYPE__ int8_t;
+
+    /*!
+     * Type used to declare a 16-bit integer.
+     */
+typedef __INT16_TYPE__ int16_t;
+
+    /*!
+     * Type used to declare a 32-bit integer.
+     */
+typedef __INT32_TYPE__ int32_t;
+
+    /*!
+     * Type used to declare a 64-bit integer.
+     */
+typedef __INT64_TYPE__ int64_t;
+
+    /*!
+     * Type used to declare an 8-bit unsigned integer.
+     */
+typedef __UINT8_TYPE__ uint8_t;
+
+    /*!
+     * Type used to declare a 16-bit unsigned integer.
+     */
+typedef __UINT16_TYPE__ uint16_t;
+
+    /*!
+     * Type used to declare a 32-bit unsigned integer.
+     */
+typedef __UINT32_TYPE__ uint32_t;
+
+    /*!
+     * Type used to declare a 64-bit unsigned integer.
+     */
+typedef __UINT64_TYPE__ uint64_t;
+#endif
+
+#endif				/* SC_TYPES_H */
diff --git a/plat/imx/common/include/sci/svc/pad/sci_pad_api.h b/plat/imx/common/include/sci/svc/pad/sci_pad_api.h
new file mode 100644
index 0000000..0955678
--- /dev/null
+++ b/plat/imx/common/include/sci/svc/pad/sci_pad_api.h
@@ -0,0 +1,572 @@
+/*
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*!
+ * Header file containing the public API for the System Controller (SC)
+ * Pad Control (PAD) function.
+ *
+ * @addtogroup PAD_SVC (SVC) Pad Service
+ *
+ * Module for the Pad Control (PAD) service.
+ *
+ * @details
+ *
+ * Pad configuration is managed by SC firmware. The pad configuration
+ * features supported by the SC firmware include:
+ *
+ * - Configuring the mux, input/output connection, and low-power isolation
+     mode.
+ * - Configuring the technology-specific pad setting such as drive strength,
+ *   pullup/pulldown, etc.
+ * - Configuring compensation for pad groups with dual voltage capability.
+ *
+ * Pad functions fall into one of three categories. Generic functions are
+ * common to all SoCs and all process technologies. SoC functions are raw
+ * low-level functions. Technology-specific functions are specific to the
+ * process technology.
+ *
+ * The list of pads is SoC specific.  Refer to the SoC [Pad List](@ref PADS)
+ * for valid pad values. Note that all pads exist on a die but may or
+ * may not be brought out by the specific package.  Mapping of pads to
+ * package pins/balls is documented in the associated Data Sheet. Some pads
+ * may not be brought out because the part (die+package) is defeatured and
+ * some pads may connect to the substrate in the package.
+ *
+ * Some pads (SC_P_COMP_*) that can be specified are not individual pads
+ * but are in fact pad groups. These groups have additional configuration
+ * that can be done using the sc_pad_set_gp_28fdsoi_comp() function. More
+ * info on these can be found in the associated Reference Manual.
+ *
+ * Pads are managed as a resource by the Resource Manager (RM).  They have
+ * assigned owners and only the owners can configure the pads. Some of the
+ * pads are reserved for use by the SCFW itself and this can be overriden
+ * with the implementation of board_config_sc(). Additionally, pads may
+ * be assigned to various other partitions via the implementation of
+ * board_system_config().
+ *
+ * Note muxing two input pads to the same IP functional signal will
+ * result in undefined behavior.
+ * @{
+ */
+
+#ifndef SC_PAD_API_H
+#define SC_PAD_API_H
+
+/* Includes */
+
+#include <sci/sci_types.h>
+#include <sci/svc/rm/sci_rm_api.h>
+
+/* Defines */
+
+/*!
+ * @name Defines for type widths
+ */
+/*@{*/
+#define SC_PAD_MUX_W            3	/* Width of mux parameter */
+/*@}*/
+
+/*!
+ * @name Defines for sc_pad_config_t
+ */
+/*@{*/
+#define SC_PAD_CONFIG_NORMAL    0U	/* Normal */
+#define SC_PAD_CONFIG_OD        1U	/* Open Drain */
+#define SC_PAD_CONFIG_OD_IN     2U	/* Open Drain and input */
+#define SC_PAD_CONFIG_OUT_IN    3U	/* Output and input */
+/*@}*/
+
+/*!
+ * @name Defines for sc_pad_iso_t
+ */
+/*@{*/
+#define SC_PAD_ISO_OFF          0U	/* ISO latch is transparent */
+#define SC_PAD_ISO_EARLY        1U	/* Follow EARLY_ISO */
+#define SC_PAD_ISO_LATE         2U	/* Follow LATE_ISO */
+#define SC_PAD_ISO_ON           3U	/* ISO latched data is held */
+/*@}*/
+
+/*!
+ * @name Defines for sc_pad_28fdsoi_dse_t
+ */
+/*@{*/
+#define SC_PAD_28FDSOI_DSE_18V_1MA   0U	/* Drive strength of 1mA for 1.8v */
+#define SC_PAD_28FDSOI_DSE_18V_2MA   1U	/* Drive strength of 2mA for 1.8v */
+#define SC_PAD_28FDSOI_DSE_18V_4MA   2U	/* Drive strength of 4mA for 1.8v */
+#define SC_PAD_28FDSOI_DSE_18V_6MA   3U	/* Drive strength of 6mA for 1.8v */
+#define SC_PAD_28FDSOI_DSE_18V_8MA   4U	/* Drive strength of 8mA for 1.8v */
+#define SC_PAD_28FDSOI_DSE_18V_10MA  5U	/* Drive strength of 10mA for 1.8v */
+#define SC_PAD_28FDSOI_DSE_18V_12MA  6U	/* Drive strength of 12mA for 1.8v */
+#define SC_PAD_28FDSOI_DSE_18V_HS    7U	/* High-speed drive strength for 1.8v */
+#define SC_PAD_28FDSOI_DSE_33V_2MA   0U	/* Drive strength of 2mA for 3.3v */
+#define SC_PAD_28FDSOI_DSE_33V_4MA   1U	/* Drive strength of 4mA for 3.3v */
+#define SC_PAD_28FDSOI_DSE_33V_8MA   2U	/* Drive strength of 8mA for 3.3v */
+#define SC_PAD_28FDSOI_DSE_33V_12MA  3U	/* Drive strength of 12mA for 3.3v */
+#define SC_PAD_28FDSOI_DSE_DV_HIGH   0U	/* High drive strength for dual volt */
+#define SC_PAD_28FDSOI_DSE_DV_LOW    1U	/* Low drive strength for dual volt */
+/*@}*/
+
+/*!
+ * @name Defines for sc_pad_28fdsoi_ps_t
+ */
+/*@{*/
+#define SC_PAD_28FDSOI_PS_KEEPER 0U	/* Bus-keeper (only valid for 1.8v) */
+#define SC_PAD_28FDSOI_PS_PU     1U	/* Pull-up */
+#define SC_PAD_28FDSOI_PS_PD     2U	/* Pull-down */
+#define SC_PAD_28FDSOI_PS_NONE   3U	/* No pull (disabled) */
+/*@}*/
+
+/*!
+ * @name Defines for sc_pad_28fdsoi_pus_t
+ */
+/*@{*/
+#define SC_PAD_28FDSOI_PUS_30K_PD  0U	/* 30K pull-down */
+#define SC_PAD_28FDSOI_PUS_100K_PU 1U	/* 100K pull-up */
+#define SC_PAD_28FDSOI_PUS_3K_PU   2U	/* 3K pull-up */
+#define SC_PAD_28FDSOI_PUS_30K_PU  3U	/* 30K pull-up */
+/*@}*/
+
+/*!
+ * @name Defines for sc_pad_wakeup_t
+ */
+/*@{*/
+#define SC_PAD_WAKEUP_OFF       0U	/* Off */
+#define SC_PAD_WAKEUP_CLEAR     1U	/* Clears pending flag */
+#define SC_PAD_WAKEUP_LOW_LVL   4U	/* Low level */
+#define SC_PAD_WAKEUP_FALL_EDGE 5U	/* Falling edge */
+#define SC_PAD_WAKEUP_RISE_EDGE 6U	/* Rising edge */
+#define SC_PAD_WAKEUP_HIGH_LVL  7U	/* High-level */
+/*@}*/
+
+/* Types */
+
+/*!
+ * This type is used to declare a pad config. It determines how the
+ * output data is driven, pull-up is controlled, and input signal is
+ * connected. Normal and OD are typical and only connect the input
+ * when the output is not driven.  The IN options are less common and
+ * force an input connection even when driving the output.
+ */
+typedef uint8_t sc_pad_config_t;
+
+/*!
+ * This type is used to declare a pad low-power isolation config.
+ * ISO_LATE is the most common setting. ISO_EARLY is only used when
+ * an output pad is directly determined by another input pad. The
+ * other two are only used when SW wants to directly contol isolation.
+ */
+typedef uint8_t sc_pad_iso_t;
+
+/*!
+ * This type is used to declare a drive strength. Note it is specific
+ * to 28FDSOI. Also note that valid values depend on the pad type.
+ */
+typedef uint8_t sc_pad_28fdsoi_dse_t;
+
+/*!
+ * This type is used to declare a pull select. Note it is specific
+ * to 28FDSOI.
+ */
+typedef uint8_t sc_pad_28fdsoi_ps_t;
+
+/*!
+ * This type is used to declare a pull-up select. Note it is specific
+ * to 28FDSOI HSIC pads.
+ */
+typedef uint8_t sc_pad_28fdsoi_pus_t;
+
+/*!
+ * This type is used to declare a wakeup mode of a pad.
+ */
+typedef uint8_t sc_pad_wakeup_t;
+
+/* Functions */
+
+/*!
+ * @name Generic Functions
+ * @{
+ */
+
+/*!
+ * This function configures the mux settings for a pad. This includes
+ * the signal mux, pad config, and low-power isolation mode.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     pad         pad to configure
+ * @param[in]     mux         mux setting
+ * @param[in]     config      pad config
+ * @param[in]     iso         low-power isolation mode
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_PARM if arguments out of range or invalid,
+ * - SC_ERR_NOACCESS if caller's partition is not the pad owner
+ *
+ * Note muxing two input pads to the same IP functional signal will
+ * result in undefined behavior.
+ *
+ * Refer to the SoC [Pad List](@ref PADS) for valid pad values.
+ */
+sc_err_t sc_pad_set_mux(sc_ipc_t ipc, sc_pad_t pad,
+			uint8_t mux, sc_pad_config_t config, sc_pad_iso_t iso);
+
+/*!
+ * This function gets the mux settings for a pad. This includes
+ * the signal mux, pad config, and low-power isolation mode.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     pad         pad to query
+ * @param[out]    mux         pointer to return mux setting
+ * @param[out]    config      pointer to return pad config
+ * @param[out]    iso         pointer to return low-power isolation mode
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_PARM if arguments out of range or invalid,
+ * - SC_ERR_NOACCESS if caller's partition is not the pad owner
+ *
+ * Refer to the SoC [Pad List](@ref PADS) for valid pad values.
+ */
+sc_err_t sc_pad_get_mux(sc_ipc_t ipc, sc_pad_t pad,
+			uint8_t *mux, sc_pad_config_t *config,
+			sc_pad_iso_t *iso);
+
+/*!
+ * This function configures the general purpose pad control. This
+ * is technology dependent and includes things like drive strength,
+ * slew rate, pull up/down, etc. Refer to the SoC Reference Manual
+ * for bit field details.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     pad         pad to configure
+ * @param[in]     ctrl        control value to set
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_PARM if arguments out of range or invalid,
+ * - SC_ERR_NOACCESS if caller's partition is not the pad owner
+ *
+ * Refer to the SoC [Pad List](@ref PADS) for valid pad values.
+ */
+sc_err_t sc_pad_set_gp(sc_ipc_t ipc, sc_pad_t pad, uint32_t ctrl);
+
+/*!
+ * This function gets the general purpose pad control. This
+ * is technology dependent and includes things like drive strength,
+ * slew rate, pull up/down, etc. Refer to the SoC Reference Manual
+ * for bit field details.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     pad         pad to query
+ * @param[out]    ctrl        pointer to return control value
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_PARM if arguments out of range or invalid,
+ * - SC_ERR_NOACCESS if caller's partition is not the pad owner
+ *
+ * Refer to the SoC [Pad List](@ref PADS) for valid pad values.
+ */
+sc_err_t sc_pad_get_gp(sc_ipc_t ipc, sc_pad_t pad, uint32_t *ctrl);
+
+/*!
+ * This function configures the wakeup mode of the pad.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     pad         pad to configure
+ * @param[in]     wakeup      wakeup to set
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_PARM if arguments out of range or invalid,
+ * - SC_ERR_NOACCESS if caller's partition is not the pad owner
+ *
+ * Refer to the SoC [Pad List](@ref PADS) for valid pad values.
+ */
+sc_err_t sc_pad_set_wakeup(sc_ipc_t ipc, sc_pad_t pad, sc_pad_wakeup_t wakeup);
+
+/*!
+ * This function gets the wakeup mode of a pad.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     pad         pad to query
+ * @param[out]    wakeup      pointer to return wakeup
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_PARM if arguments out of range or invalid,
+ * - SC_ERR_NOACCESS if caller's partition is not the pad owner
+ *
+ * Refer to the SoC [Pad List](@ref PADS) for valid pad values.
+ */
+sc_err_t sc_pad_get_wakeup(sc_ipc_t ipc, sc_pad_t pad, sc_pad_wakeup_t *wakeup);
+
+/*!
+ * This function configures a pad.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     pad         pad to configure
+ * @param[in]     mux         mux setting
+ * @param[in]     config      pad config
+ * @param[in]     iso         low-power isolation mode
+ * @param[in]     ctrl        control value
+ * @param[in]     wakeup      wakeup to set
+ *
+ * @see sc_pad_set_mux().
+ * @see sc_pad_set_gp().
+ *
+ * Return errors:
+ * - SC_PARM if arguments out of range or invalid,
+ * - SC_ERR_NOACCESS if caller's partition is not the pad owner
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Note muxing two input pads to the same IP functional signal will
+ * result in undefined behavior.
+ *
+ * Refer to the SoC [Pad List](@ref PADS) for valid pad values.
+ */
+sc_err_t sc_pad_set_all(sc_ipc_t ipc, sc_pad_t pad, uint8_t mux,
+			sc_pad_config_t config, sc_pad_iso_t iso, uint32_t ctrl,
+			sc_pad_wakeup_t wakeup);
+
+/*!
+ * This function gets a pad's config.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     pad         pad to query
+ * @param[out]    mux         pointer to return mux setting
+ * @param[out]    config      pointer to return pad config
+ * @param[out]    iso         pointer to return low-power isolation mode
+ * @param[out]    ctrl        pointer to return control value
+ * @param[out]    wakeup      pointer to return wakeup to set
+ *
+ * @see sc_pad_set_mux().
+ * @see sc_pad_set_gp().
+ *
+ * Return errors:
+ * - SC_PARM if arguments out of range or invalid,
+ * - SC_ERR_NOACCESS if caller's partition is not the pad owner
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Refer to the SoC [Pad List](@ref PADS) for valid pad values.
+ */
+sc_err_t sc_pad_get_all(sc_ipc_t ipc, sc_pad_t pad, uint8_t *mux,
+			sc_pad_config_t *config, sc_pad_iso_t *iso,
+			uint32_t *ctrl, sc_pad_wakeup_t *wakeup);
+
+/* @} */
+
+/*!
+ * @name SoC Specific Functions
+ * @{
+ */
+
+/*!
+ * This function configures the settings for a pad. This setting is SoC
+ * specific.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     pad         pad to configure
+ * @param[in]     val         value to set
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_PARM if arguments out of range or invalid,
+ * - SC_ERR_NOACCESS if caller's partition is not the pad owner
+ *
+ * Refer to the SoC [Pad List](@ref PADS) for valid pad values.
+ */
+sc_err_t sc_pad_set(sc_ipc_t ipc, sc_pad_t pad, uint32_t val);
+
+/*!
+ * This function gets the settings for a pad. This setting is SoC
+ * specific.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     pad         pad to query
+ * @param[out]    val         pointer to return setting
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_PARM if arguments out of range or invalid,
+ * - SC_ERR_NOACCESS if caller's partition is not the pad owner
+ *
+ * Refer to the SoC [Pad List](@ref PADS) for valid pad values.
+ */
+sc_err_t sc_pad_get(sc_ipc_t ipc, sc_pad_t pad, uint32_t *val);
+
+/* @} */
+
+/*!
+ * @name Technology Specific Functions
+ * @{
+ */
+
+/*!
+ * This function configures the pad control specific to 28FDSOI.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     pad         pad to configure
+ * @param[in]     dse         drive strength
+ * @param[in]     ps          pull select
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_PARM if arguments out of range or invalid,
+ * - SC_ERR_NOACCESS if caller's partition is not the pad owner,
+ * - SC_ERR_UNAVAILABLE if process not applicable
+ *
+ * Refer to the SoC [Pad List](@ref PADS) for valid pad values.
+ */
+sc_err_t sc_pad_set_gp_28fdsoi(sc_ipc_t ipc, sc_pad_t pad,
+			       sc_pad_28fdsoi_dse_t dse,
+			       sc_pad_28fdsoi_ps_t ps);
+
+/*!
+ * This function gets the pad control specific to 28FDSOI.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     pad         pad to query
+ * @param[out]    dse         pointer to return drive strength
+ * @param[out]    ps          pointer to return pull select
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_PARM if arguments out of range or invalid,
+ * - SC_ERR_NOACCESS if caller's partition is not the pad owner,
+ * - SC_ERR_UNAVAILABLE if process not applicable
+ *
+ * Refer to the SoC [Pad List](@ref PADS) for valid pad values.
+ */
+sc_err_t sc_pad_get_gp_28fdsoi(sc_ipc_t ipc, sc_pad_t pad,
+			       sc_pad_28fdsoi_dse_t *dse,
+			       sc_pad_28fdsoi_ps_t *ps);
+
+/*!
+ * This function configures the pad control specific to 28FDSOI.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     pad         pad to configure
+ * @param[in]     dse         drive strength
+ * @param[in]     hys         hysteresis
+ * @param[in]     pus         pull-up select
+ * @param[in]     pke         pull keeper enable
+ * @param[in]     pue         pull-up enable
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_PARM if arguments out of range or invalid,
+ * - SC_ERR_NOACCESS if caller's partition is not the pad owner,
+ * - SC_ERR_UNAVAILABLE if process not applicable
+ *
+ * Refer to the SoC [Pad List](@ref PADS) for valid pad values.
+ */
+sc_err_t sc_pad_set_gp_28fdsoi_hsic(sc_ipc_t ipc, sc_pad_t pad,
+				    sc_pad_28fdsoi_dse_t dse, sc_bool_t hys,
+				    sc_pad_28fdsoi_pus_t pus, sc_bool_t pke,
+				    sc_bool_t pue);
+
+/*!
+ * This function gets the pad control specific to 28FDSOI.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     pad         pad to query
+ * @param[out]    dse         pointer to return drive strength
+ * @param[out]    hys         pointer to return hysteresis
+ * @param[out]    pus         pointer to return pull-up select
+ * @param[out]    pke         pointer to return pull keeper enable
+ * @param[out]    pue         pointer to return pull-up enable
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_PARM if arguments out of range or invalid,
+ * - SC_ERR_NOACCESS if caller's partition is not the pad owner,
+ * - SC_ERR_UNAVAILABLE if process not applicable
+ *
+ * Refer to the SoC [Pad List](@ref PADS) for valid pad values.
+ */
+sc_err_t sc_pad_get_gp_28fdsoi_hsic(sc_ipc_t ipc, sc_pad_t pad,
+				    sc_pad_28fdsoi_dse_t *dse, sc_bool_t *hys,
+				    sc_pad_28fdsoi_pus_t *pus, sc_bool_t *pke,
+				    sc_bool_t *pue);
+
+/*!
+ * This function configures the compensation control specific to 28FDSOI.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     pad         pad to configure
+ * @param[in]     compen      compensation/freeze mode
+ * @param[in]     fastfrz     fast freeze
+ * @param[in]     rasrcp      compensation code for PMOS
+ * @param[in]     rasrcn      compensation code for NMOS
+ * @param[in]     nasrc_sel   NASRC read select
+ * @param[in]     psw_ovr     2.5v override
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_PARM if arguments out of range or invalid,
+ * - SC_ERR_NOACCESS if caller's partition is not the pad owner,
+ * - SC_ERR_UNAVAILABLE if process not applicable
+ *
+ * Refer to the SoC [Pad List](@ref PADS) for valid pad values.
+ *
+ * Note \a psw_ovr is only applicable to pads supporting 2.5 volt
+ * operation (e.g. some Ethernet pads).
+ */
+sc_err_t sc_pad_set_gp_28fdsoi_comp(sc_ipc_t ipc, sc_pad_t pad,
+				    uint8_t compen, sc_bool_t fastfrz,
+				    uint8_t rasrcp, uint8_t rasrcn,
+				    sc_bool_t nasrc_sel, sc_bool_t psw_ovr);
+
+/*!
+ * This function gets the compensation control specific to 28FDSOI.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     pad         pad to query
+ * @param[out]    compen      pointer to return compensation/freeze mode
+ * @param[out]    fastfrz     pointer to return fast freeze
+ * @param[out]    rasrcp      pointer to return compensation code for PMOS
+ * @param[out]    rasrcn      pointer to return compensation code for NMOS
+ * @param[out]    nasrc_sel   pointer to return NASRC read select
+ * @param[out]    compok      pointer to return compensation status
+ * @param[out]    nasrc       pointer to return NASRCP/NASRCN
+ * @param[out]    psw_ovr     pointer to return the 2.5v override
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_PARM if arguments out of range or invalid,
+ * - SC_ERR_NOACCESS if caller's partition is not the pad owner,
+ * - SC_ERR_UNAVAILABLE if process not applicable
+ *
+ * Refer to the SoC [Pad List](@ref PADS) for valid pad values.
+ */
+sc_err_t sc_pad_get_gp_28fdsoi_comp(sc_ipc_t ipc, sc_pad_t pad,
+				    uint8_t *compen, sc_bool_t *fastfrz,
+				    uint8_t *rasrcp, uint8_t *rasrcn,
+				    sc_bool_t *nasrc_sel, sc_bool_t *compok,
+				    uint8_t *nasrc, sc_bool_t *psw_ovr);
+
+/* @} */
+
+#endif				/* SC_PAD_API_H */
+
+/**@}*/
diff --git a/plat/imx/common/include/sci/svc/pm/sci_pm_api.h b/plat/imx/common/include/sci/svc/pm/sci_pm_api.h
new file mode 100644
index 0000000..5c3c382
--- /dev/null
+++ b/plat/imx/common/include/sci/svc/pm/sci_pm_api.h
@@ -0,0 +1,684 @@
+/*
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*!
+ * Header file containing the public API for the System Controller (SC)
+ * Power Management (PM) function. This includes functions for power state
+ * control, clock control, reset control, and wake-up event control.
+ *
+ * @addtogroup PM_SVC (SVC) Power Management Service
+ *
+ * Module for the Power Management (PM) service.
+ *
+ * @{
+ */
+
+#ifndef SC_PM_API_H
+#define SC_PM_API_H
+
+/* Includes */
+
+#include <sci/sci_types.h>
+#include <sci/svc/rm/sci_rm_api.h>
+
+/* Defines */
+
+/*!
+ * @name Defines for type widths
+ */
+/*@{*/
+#define SC_PM_POWER_MODE_W      2	/* Width of sc_pm_power_mode_t */
+#define SC_PM_CLOCK_MODE_W      3	/* Width of sc_pm_clock_mode_t */
+#define SC_PM_RESET_TYPE_W      2	/* Width of sc_pm_reset_type_t */
+#define SC_PM_RESET_REASON_W    3	/* Width of sc_pm_reset_reason_t */
+/*@}*/
+
+/*!
+ * @name Defines for clock indexes (sc_pm_clk_t)
+ */
+/*@{*/
+/*@}*/
+
+/*!
+ * @name Defines for ALL parameters
+ */
+/*@{*/
+#define SC_PM_CLK_ALL   UINT8_MAX	/* All clocks */
+/*@}*/
+
+/*!
+ * @name Defines for sc_pm_power_mode_t
+ */
+/*@{*/
+#define SC_PM_PW_MODE_OFF       0U	/* Power off */
+#define SC_PM_PW_MODE_STBY      1U	/* Power in standby */
+#define SC_PM_PW_MODE_LP        2U	/* Power in low-power */
+#define SC_PM_PW_MODE_ON        3U	/* Power on */
+/*@}*/
+
+/*!
+ * @name Defines for sc_pm_clk_t
+ */
+/*@{*/
+#define SC_PM_CLK_SLV_BUS       0U	/* Slave bus clock */
+#define SC_PM_CLK_MST_BUS       1U	/* Master bus clock */
+#define SC_PM_CLK_PER           2U	/* Peripheral clock */
+#define SC_PM_CLK_PHY           3U	/* Phy clock */
+#define SC_PM_CLK_MISC          4U	/* Misc clock */
+#define SC_PM_CLK_MISC0         0U	/* Misc 0 clock */
+#define SC_PM_CLK_MISC1         1U	/* Misc 1 clock */
+#define SC_PM_CLK_MISC2         2U	/* Misc 2 clock */
+#define SC_PM_CLK_MISC3         3U	/* Misc 3 clock */
+#define SC_PM_CLK_MISC4         4U	/* Misc 4 clock */
+#define SC_PM_CLK_CPU           2U	/* CPU clock */
+#define SC_PM_CLK_PLL           4U	/* PLL */
+#define SC_PM_CLK_BYPASS        4U	/* Bypass clock */
+/*@}*/
+
+/*!
+ * @name Defines for sc_pm_clk_mode_t
+ */
+/*@{*/
+#define SC_PM_CLK_MODE_ROM_INIT        0U	/* Clock is initialized by ROM. */
+#define SC_PM_CLK_MODE_OFF             1U	/* Clock is disabled */
+#define SC_PM_CLK_MODE_ON              2U	/* Clock is enabled. */
+#define SC_PM_CLK_MODE_AUTOGATE_SW     3U	/* Clock is in SW autogate mode */
+#define SC_PM_CLK_MODE_AUTOGATE_HW     4U	/* Clock is in HW autogate mode */
+#define SC_PM_CLK_MODE_AUTOGATE_SW_HW  5U	/* Clock is in SW-HW autogate mode */
+/*@}*/
+
+/*!
+ * @name Defines for sc_pm_clk_parent_t
+ */
+/*@{*/
+#define SC_PM_PARENT_XTAL              0U	/* Parent is XTAL. */
+#define SC_PM_PARENT_PLL0              1U	/* Parent is PLL0 */
+#define SC_PM_PARENT_PLL1              2U	/* Parent is PLL1 or PLL0/2 */
+#define SC_PM_PARENT_PLL2              3U	/* Parent in PLL2 or PLL0/4 */
+#define SC_PM_PARENT_BYPS              4U	/* Parent is a bypass clock. */
+/*@}*/
+
+/*!
+ * @name Defines for sc_pm_reset_type_t
+ */
+/*@{*/
+#define SC_PM_RESET_TYPE_COLD          0U	/* Cold reset */
+#define SC_PM_RESET_TYPE_WARM          1U	/* Warm reset */
+#define SC_PM_RESET_TYPE_BOARD         2U	/* Board reset */
+/*@}*/
+
+/*!
+ * @name Defines for sc_pm_reset_cause_t
+ */
+/*@{*/
+#define SC_PM_RESET_CAUSE_TEMP         0U	/* Reset due to temp panic alarm */
+#define SC_PM_RESET_CAUSE_FAULT        1U	/* Reset due to fault exception */
+#define SC_PM_RESET_CAUSE_IRQ          2U	/* Reset due to SCU reset IRQ */
+#define SC_PM_RESET_CAUSE_WDOG         3U	/* Reset due to SW WDOG */
+#define SC_PM_RESET_CAUSE_API          4U	/* Reset due to pm_reset() or monitor */
+/*@}*/
+
+/*!
+ * @name Defines for sc_pm_reset_reason_t
+ */
+/*@{*/
+#define SC_PM_RESET_REASON_POR         0U	/* Power on reset */
+#define SC_PM_RESET_REASON_WARM        1U	/* Warm reset */
+#define SC_PM_RESET_REASON_SW          2U	/* Software reset */
+#define SC_PM_RESET_REASON_WDOG        3U	/* Watchdog reset */
+#define SC_PM_RESET_REASON_LOCKUP      4U	/* Lockup reset */
+#define SC_PM_RESET_REASON_TAMPER      5U	/* Tamper reset */
+#define SC_PM_RESET_REASON_TEMP        6U	/* Temp reset */
+#define SC_PM_RESET_REASON_LOW_VOLT    7U	/* Low voltage reset */
+/*@}*/
+
+/*!
+ * @name Defines for sc_pm_sys_if_t
+ */
+/*@{*/
+#define SC_PM_SYS_IF_INTERCONNECT       0U	/* System interconnect */
+#define SC_PM_SYS_IF_MU                 1U	/* AP -> SCU message units */
+#define SC_PM_SYS_IF_OCMEM              2U	/* On-chip memory (ROM/OCRAM) */
+#define SC_PM_SYS_IF_DDR                3U	/* DDR memory */
+/*@}*/
+
+/*!
+ * @name Defines for sc_pm_wake_src_t
+ */
+/*@{*/
+#define SC_PM_WAKE_SRC_NONE             0U	/* No wake source, used for self-kill */
+#define SC_PM_WAKE_SRC_SCU              1U	/* Wakeup from SCU to resume CPU (IRQSTEER & GIC powered down) */
+#define SC_PM_WAKE_SRC_IRQSTEER         2U	/* Wakeup from IRQSTEER to resume CPU (GIC powered down) */
+#define SC_PM_WAKE_SRC_IRQSTEER_GIC     3U	/* Wakeup from IRQSTEER+GIC to wake CPU  (GIC clock gated) */
+#define SC_PM_WAKE_SRC_GIC              4U	/* Wakeup from GIC to wake CPU */
+/*@}*/
+
+/* Types */
+
+/*!
+ * This type is used to declare a power mode. Note resources only use
+ * SC_PM_PW_MODE_OFF and SC_PM_PW_MODE_ON. The other modes are used only
+ * as system power modes.
+ */
+typedef uint8_t sc_pm_power_mode_t;
+
+/*!
+ * This type is used to declare a clock.
+ */
+typedef uint8_t sc_pm_clk_t;
+
+/*!
+ * This type is used to declare a clock mode.
+ */
+typedef uint8_t sc_pm_clk_mode_t;
+
+/*!
+ * This type is used to declare the clock parent.
+ */
+typedef uint8_t sc_pm_clk_parent_t;
+
+/*!
+ * This type is used to declare clock rates.
+ */
+typedef uint32_t sc_pm_clock_rate_t;
+
+/*!
+ * This type is used to declare a desired reset type.
+ */
+typedef uint8_t sc_pm_reset_type_t;
+
+/*!
+ * This type is used to declare a desired reset type.
+ */
+typedef uint8_t sc_pm_reset_cause;
+
+/*!
+ * This type is used to declare a reason for a reset.
+ */
+typedef uint8_t sc_pm_reset_reason_t;
+
+/*!
+ * This type is used to specify a system-level interface to be power managed.
+ */
+typedef uint8_t sc_pm_sys_if_t;
+
+/*!
+ * This type is used to specify a wake source for CPU resources.
+ */
+typedef uint8_t sc_pm_wake_src_t;
+
+/* Functions */
+
+/*!
+ * @name Power Functions
+ * @{
+ */
+
+/*!
+ * This function sets the system power mode. Only the owner of the
+ * SC_R_SYSTEM resource can do this.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     mode        power mode to apply
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_ERR_PARM if invalid mode,
+ * - SC_ERR_NOACCESS if caller not the owner of SC_R_SYSTEM
+ *
+ * @see sc_pm_set_sys_power_mode().
+ */
+sc_err_t sc_pm_set_sys_power_mode(sc_ipc_t ipc, sc_pm_power_mode_t mode);
+
+/*!
+ * This function sets the power mode of a partition.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     pt          handle of partition
+ * @param[in]     mode        power mode to apply
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_ERR_PARM if invalid partition or mode,
+ * - SC_ERR_NOACCESS if caller's partition is not the owner or
+ *   parent of \a pt
+ *
+ * The power mode of the partitions is a max power any resource will
+ * be set to. Calling this will result in all resources owned
+ * by \a pt to have their power changed to the lower of \a mode or the
+ * individual resource mode set using sc_pm_set_resource_power_mode().
+ */
+sc_err_t sc_pm_set_partition_power_mode(sc_ipc_t ipc, sc_rm_pt_t pt,
+					sc_pm_power_mode_t mode);
+
+/*!
+ * This function gets the power mode of a partition.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     pt          handle of partition
+ * @param[out]    mode        pointer to return power mode
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_ERR_PARM if invalid partition
+ */
+sc_err_t sc_pm_get_sys_power_mode(sc_ipc_t ipc, sc_rm_pt_t pt,
+				  sc_pm_power_mode_t *mode);
+
+/*!
+ * This function sets the power mode of a resource.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     resource    ID of the resource
+ * @param[in]     mode        power mode to apply
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_ERR_PARM if invalid resource or mode,
+ * - SC_ERR_NOACCESS if caller's partition is not the resource owner
+ *   or parent of the owner
+ *
+ * This function will record the individual resource power mode
+ * and change it if the requested mode is lower than or equal to the
+ * partition power mode set with sc_pm_set_partition_power_mode().
+ * In other words, the power mode of the resource will be the minimum
+ * of the resource power mode and the partition power mode.
+ *
+ * Note some resources are still not accessible even when powered up if bus
+ * transactions go through a fabric not powered up. Examples of this are
+ * resources in display and capture subsystems which require the display
+ * controller or the imaging subsytem to be powered up first.
+ *
+ * Not that resources are grouped into power domains by the underlying
+ * hardware. If any resource in the domain is on, the entire power domain
+ * will be on. Other power domains required to access the resource will
+ * also be turned on. Clocks required to access the peripheral will be
+ * turned on. Refer to the SoC RM for more info on power domains and access
+ * infrastructure (bus fabrics, clock domains, etc.).
+ */
+sc_err_t sc_pm_set_resource_power_mode(sc_ipc_t ipc, sc_rsrc_t resource,
+				       sc_pm_power_mode_t mode);
+
+/*!
+ * This function gets the power mode of a resource.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     resource    ID of the resource
+ * @param[out]    mode        pointer to return power mode
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Note only SC_PM_PW_MODE_OFF and SC_PM_PW_MODE_ON are valid. The value
+ * returned does not reflect the power mode of the partition..
+ */
+sc_err_t sc_pm_get_resource_power_mode(sc_ipc_t ipc, sc_rsrc_t resource,
+				       sc_pm_power_mode_t *mode);
+
+/*!
+ * This function requests the low power mode some of the resources
+ * can enter based on their state. This API is only valid for the
+ * following resources : SC_R_A53, SC_R_A53_0, SC_R_A53_1, SC_A53_2,
+ * SC_A53_3, SC_R_A72, SC_R_A72_0, SC_R_A72_1, SC_R_CC1, SC_R_A35,
+ * SC_R_A35_0, SC_R_A35_1, SC_R_A35_2, SC_R_A35_3.
+ * For all other resources it will return SC_ERR_PARAM.
+ * This function will set the low power mode the cores, cluster
+ * and cluster associated resources will enter when all the cores
+ * in a given cluster execute WFI
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     resource    ID of the resource
+ * @param[in]     mode        power mode to apply
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ */
+sc_err_t sc_pm_req_low_power_mode(sc_ipc_t ipc, sc_rsrc_t resource,
+				  sc_pm_power_mode_t mode);
+
+/*!
+ * This function requests low-power mode entry for CPU/cluster
+ * resources. This API is only valid for the following resources:
+ * SC_R_A53, SC_R_A53_x, SC_R_A72, SC_R_A72_x, SC_R_A35, SC_R_A35_x,
+ * SC_R_CCI. For all other resources it will return SC_ERR_PARAM.
+ * For individual core resources, the specified power mode
+ * and wake source will be applied after the core has entered
+ * WFI.  For cluster resources, the specified power mode is
+ * applied after all cores in the cluster have entered low-power mode.
+ * For multicluster resources, the specified power mode is applied
+ * after all clusters have reached low-power mode.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     resource    ID of the resource
+ * @param[in]     mode        power mode to apply
+ * @param[in]     wake_src    wake source for low-power exit
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ */
+sc_err_t sc_pm_req_cpu_low_power_mode(sc_ipc_t ipc, sc_rsrc_t resource,
+				      sc_pm_power_mode_t mode,
+				      sc_pm_wake_src_t wake_src);
+
+/*!
+ * This function is used to set the resume address of a CPU.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     resource    ID of the CPU resource
+ * @param[in]     address     64-bit resume address
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_ERR_PARM if invalid resource or address,
+ * - SC_ERR_NOACCESS if caller's partition is not the parent of the
+ *   resource (CPU) owner
+ */
+sc_err_t sc_pm_set_cpu_resume_addr(sc_ipc_t ipc, sc_rsrc_t resource,
+				   sc_faddr_t address);
+
+/*!
+ * This function is used to set parameters for CPU resume from
+ * low-power mode.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     resource    ID of the CPU resource
+ * @param[in]     isPrimary   set SC_TRUE if primary wake CPU
+ * @param[in]     address     64-bit resume address
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_ERR_PARM if invalid resource or address,
+ * - SC_ERR_NOACCESS if caller's partition is not the parent of the
+ *   resource (CPU) owner
+ */
+sc_err_t sc_pm_set_cpu_resume(sc_ipc_t ipc, sc_rsrc_t resource,
+			      sc_bool_t isPrimary, sc_faddr_t address);
+
+/*!
+ * This function requests the power mode configuration for system-level
+ * interfaces including messaging units, interconnect, and memories.  This API
+ * is only valid for the following resources : SC_R_A53, SC_R_A72, and
+ * SC_R_M4_x_PID_y.  For all other resources, it will return SC_ERR_PARAM.
+ * The requested power mode will be captured and applied to system-level
+ * resources as system conditions allow.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     resource    ID of the resource
+ * @param[in]     sys_if      system-level interface to be configured
+ * @param[in]     hpm         high-power mode for the system interface
+ * @param[in]     lpm         low-power mode for the system interface
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ */
+sc_err_t sc_pm_req_sys_if_power_mode(sc_ipc_t ipc, sc_rsrc_t resource,
+				     sc_pm_sys_if_t sys_if,
+				     sc_pm_power_mode_t hpm,
+				     sc_pm_power_mode_t lpm);
+
+/* @} */
+
+/*!
+ * @name Clock/PLL Functions
+ * @{
+ */
+
+/*!
+ * This function sets the rate of a resource's clock/PLL.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     resource    ID of the resource
+ * @param[in]     clk         clock/PLL to affect
+ * @param[in,out] rate        pointer to rate to set,
+ *                            return actual rate
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_ERR_PARM if invalid resource or clock/PLL,
+ * - SC_ERR_NOACCESS if caller's partition is not the resource owner
+ *   or parent of the owner,
+ * - SC_ERR_UNAVAILABLE if clock/PLL not applicable to this resource,
+ * - SC_ERR_LOCKED if rate locked (usually because shared clock/PLL)
+ *
+ * Refer to the [Clock List](@ref CLOCKS) for valid clock/PLL values.
+ */
+sc_err_t sc_pm_set_clock_rate(sc_ipc_t ipc, sc_rsrc_t resource,
+			      sc_pm_clk_t clk, sc_pm_clock_rate_t *rate);
+
+/*!
+ * This function gets the rate of a resource's clock/PLL.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     resource    ID of the resource
+ * @param[in]     clk         clock/PLL to affect
+ * @param[out]    rate        pointer to return rate
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_ERR_PARM if invalid resource or clock/PLL,
+ * - SC_ERR_NOACCESS if caller's partition is not the resource owner
+ *   or parent of the owner,
+ * - SC_ERR_UNAVAILABLE if clock/PLL not applicable to this resource
+ *
+ * Refer to the [Clock List](@ref CLOCKS) for valid clock/PLL values.
+ */
+sc_err_t sc_pm_get_clock_rate(sc_ipc_t ipc, sc_rsrc_t resource,
+			      sc_pm_clk_t clk, sc_pm_clock_rate_t *rate);
+
+/*!
+ * This function enables/disables a resource's clock.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     resource    ID of the resource
+ * @param[in]     clk         clock to affect
+ * @param[in]     enable      enable if SC_TRUE; otherwise disabled
+ * @param[in]     autog       HW auto clock gating
+ *
+ * If \a resource is SC_R_ALL then all resources owned will be affected.
+ * No error will be returned.
+ *
+ * If \a clk is SC_PM_CLK_ALL, then an error will be returned if any
+ * of the available clocks returns an error.
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_ERR_PARM if invalid resource or clock,
+ * - SC_ERR_NOACCESS if caller's partition is not the resource owner
+ *   or parent of the owner,
+ * - SC_ERR_UNAVAILABLE if clock not applicable to this resource
+ *
+ * Refer to the [Clock List](@ref CLOCKS) for valid clock values.
+ */
+sc_err_t sc_pm_clock_enable(sc_ipc_t ipc, sc_rsrc_t resource,
+			    sc_pm_clk_t clk, sc_bool_t enable, sc_bool_t autog);
+
+/*!
+ * This function sets the parent of a resource's clock.
+ * This function should only be called when the clock is disabled.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     resource    ID of the resource
+ * @param[in]     clk         clock to affect
+ * @param[in]     parent      New parent of the clock.
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_ERR_PARM if invalid resource or clock,
+ * - SC_ERR_NOACCESS if caller's partition is not the resource owner
+ *   or parent of the owner,
+ * - SC_ERR_UNAVAILABLE if clock not applicable to this resource
+ * - SC_ERR_BUSY if clock is currently enabled.
+ * - SC_ERR_NOPOWER if resource not powered
+ *
+ * Refer to the [Clock List](@ref CLOCKS) for valid clock values.
+ */
+sc_err_t sc_pm_set_clock_parent(sc_ipc_t ipc, sc_rsrc_t resource,
+				sc_pm_clk_t clk, sc_pm_clk_parent_t parent);
+
+/*!
+ * This function gets the parent of a resource's clock.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     resource    ID of the resource
+ * @param[in]     clk         clock to affect
+ * @param[out]     parent     pointer to return parent of clock.
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_ERR_PARM if invalid resource or clock,
+ * - SC_ERR_NOACCESS if caller's partition is not the resource owner
+ *   or parent of the owner,
+ * - SC_ERR_UNAVAILABLE if clock not applicable to this resource
+ *
+ * Refer to the [Clock List](@ref CLOCKS) for valid clock values.
+ */
+sc_err_t sc_pm_get_clock_parent(sc_ipc_t ipc, sc_rsrc_t resource,
+				sc_pm_clk_t clk, sc_pm_clk_parent_t *parent);
+
+/* @} */
+
+/*!
+ * @name Reset Functions
+ * @{
+ */
+
+/*!
+ * This function is used to reset the system. Only the owner of the
+ * SC_R_SYSTEM resource can do this.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     type        reset type
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_ERR_PARM if invalid type,
+ * - SC_ERR_NOACCESS if caller not the owner of SC_R_SYSTEM
+ *
+ * If this function returns, then the reset did not occur due to an
+ * invalid parameter.
+ */
+sc_err_t sc_pm_reset(sc_ipc_t ipc, sc_pm_reset_type_t type);
+
+/*!
+ * This function gets a caller's reset reason.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[out]    reason      pointer to return reset reason
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ */
+sc_err_t sc_pm_reset_reason(sc_ipc_t ipc, sc_pm_reset_reason_t *reason);
+
+/*!
+ * This function is used to boot a partition.
+ *
+ * @param[in]     ipc          IPC handle
+ * @param[in]     pt           handle of partition to boot
+ * @param[in]     resource_cpu ID of the CPU resource to start
+ * @param[in]     boot_addr    64-bit boot address
+ * @param[in]     resource_mu  ID of the MU that must be powered
+ * @param[in]     resource_dev ID of the boot device that must be powered
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_ERR_PARM if invalid partition, resource, or addr,
+ * - SC_ERR_NOACCESS if caller's partition is not the parent of the
+ *   partition to boot
+ */
+sc_err_t sc_pm_boot(sc_ipc_t ipc, sc_rm_pt_t pt,
+		    sc_rsrc_t resource_cpu, sc_faddr_t boot_addr,
+		    sc_rsrc_t resource_mu, sc_rsrc_t resource_dev);
+
+/*!
+ * This function is used to reboot the caller's partition.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     type        reset type
+ *
+ * If \a type is SC_PM_RESET_TYPE_COLD, then most peripherals owned by
+ * the calling partition will be reset if possible. SC state (partitions,
+ * power, clocks, etc.) is reset. The boot SW of the booting CPU must be
+ * able to handle peripherals that that are not reset.
+ *
+ * If \a type is SC_PM_RESET_TYPE_WARM, then only the boot CPU is reset.
+ * SC state (partitions, power, clocks, etc.) are NOT reset. The boot SW
+ * of the booting CPU must be able to handle peripherals and SC state that
+ * that are not reset.
+ *
+ * If \a type is SC_PM_RESET_TYPE_BOARD, then return with no action.
+ *
+ * If this function returns, then the reset did not occur due to an
+ * invalid parameter.
+ */
+void sc_pm_reboot(sc_ipc_t ipc, sc_pm_reset_type_t type);
+
+/*!
+ * This function is used to reboot a partition.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     pt          handle of partition to reboot
+ * @param[in]     type        reset type
+ *
+ * If \a type is SC_PM_RESET_TYPE_COLD, then most peripherals owned by
+ * the calling partition will be reset if possible. SC state (partitions,
+ * power, clocks, etc.) is reset. The boot SW of the booting CPU must be
+ * able to handle peripherals that that are not reset.
+ *
+ * If \a type is SC_PM_RESET_TYPE_WARM, then only the boot CPU is reset.
+ * SC state (partitions, power, clocks, etc.) are NOT reset. The boot SW
+ * of the booting CPU must be able to handle peripherals and SC state that
+ * that are not reset.
+ *
+ * If \a type is SC_PM_RESET_TYPE_BOARD, then return with no action.
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_ERR_PARM if invalid partition or type
+ * - SC_ERR_NOACCESS if caller's partition is not the parent of \a pt,
+ *
+ * Most peripherals owned by the partition will be reset if
+ * possible. SC state (partitions, power, clocks, etc.) is reset. The
+ * boot SW of the booting CPU must be able to handle peripherals that
+ * that are not reset.
+ */
+sc_err_t sc_pm_reboot_partition(sc_ipc_t ipc, sc_rm_pt_t pt,
+				sc_pm_reset_type_t type);
+
+/*!
+ * This function is used to start/stop a CPU.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     resource    ID of the CPU resource
+ * @param[in]     enable      start if SC_TRUE; otherwise stop
+ * @param[in]     address     64-bit boot address
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_ERR_PARM if invalid resource or address,
+ * - SC_ERR_NOACCESS if caller's partition is not the parent of the
+ *   resource (CPU) owner
+ */
+sc_err_t sc_pm_cpu_start(sc_ipc_t ipc, sc_rsrc_t resource, sc_bool_t enable,
+			 sc_faddr_t address);
+
+/* @} */
+
+#endif				/* SC_PM_API_H */
+
+/**@}*/
diff --git a/plat/imx/common/include/sci/svc/rm/sci_rm_api.h b/plat/imx/common/include/sci/svc/rm/sci_rm_api.h
new file mode 100644
index 0000000..012d919
--- /dev/null
+++ b/plat/imx/common/include/sci/svc/rm/sci_rm_api.h
@@ -0,0 +1,757 @@
+/*
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*!
+ * Header file containing the public API for the System Controller (SC)
+ * Resource Management (RM) function. This includes functions for
+ * partitioning resources, pads, and memory regions.
+ *
+ * @addtogroup RM_SVC (SVC) Resource Management Service
+ *
+ * Module for the Resource Management (RM) service.
+ *
+ * @includedoc rm/details.dox
+ *
+ * @{
+ */
+
+#ifndef SC_RM_API_H
+#define SC_RM_API_H
+
+/* Includes */
+
+#include <sci/sci_types.h>
+
+/* Defines */
+
+/*!
+ * @name Defines for type widths
+ */
+/*@{*/
+#define SC_RM_PARTITION_W   5	/* Width of sc_rm_pt_t */
+#define SC_RM_MEMREG_W      6	/* Width of sc_rm_mr_t */
+#define SC_RM_DID_W         4	/* Width of sc_rm_did_t */
+#define SC_RM_SID_W         6	/* Width of sc_rm_sid_t */
+#define SC_RM_SPA_W         2	/* Width of sc_rm_spa_t */
+#define SC_RM_PERM_W        3	/* Width of sc_rm_perm_t */
+/*@}*/
+
+/*!
+ * @name Defines for ALL parameters
+ */
+/*@{*/
+#define SC_RM_PT_ALL        ((sc_rm_pt_t) UINT8_MAX)	/* All partitions */
+#define SC_RM_MR_ALL        ((sc_rm_mr_t) UINT8_MAX)	/* All memory regions */
+/*@}*/
+
+/*!
+ * @name Defines for sc_rm_spa_t
+ */
+/*@{*/
+#define SC_RM_SPA_PASSTHRU  0U	/* Pass through (attribute driven by master) */
+#define SC_RM_SPA_PASSSID   1U	/* Pass through and output on SID */
+#define SC_RM_SPA_ASSERT    2U	/* Assert (force to be secure/privileged) */
+#define SC_RM_SPA_NEGATE    3U	/* Negate (force to be non-secure/user) */
+/*@}*/
+
+/*!
+ * @name Defines for sc_rm_perm_t
+ */
+/*@{*/
+#define SC_RM_PERM_NONE         0U	/* No access */
+#define SC_RM_PERM_SEC_R        1U	/* Secure RO */
+#define SC_RM_PERM_SECPRIV_RW   2U	/* Secure privilege R/W */
+#define SC_RM_PERM_SEC_RW       3U	/* Secure R/W */
+#define SC_RM_PERM_NSPRIV_R     4U	/* Secure R/W, non-secure privilege RO */
+#define SC_RM_PERM_NS_R         5U	/* Secure R/W, non-secure RO */
+#define SC_RM_PERM_NSPRIV_RW    6U	/* Secure R/W, non-secure privilege R/W */
+#define SC_RM_PERM_FULL         7U	/* Full access */
+/*@}*/
+
+/* Types */
+
+/*!
+ * This type is used to declare a resource partition.
+ */
+typedef uint8_t sc_rm_pt_t;
+
+/*!
+ * This type is used to declare a memory region.
+ */
+typedef uint8_t sc_rm_mr_t;
+
+/*!
+ * This type is used to declare a resource domain ID used by the
+ * isolation HW.
+ */
+typedef uint8_t sc_rm_did_t;
+
+/*!
+ * This type is used to declare an SMMU StreamID.
+ */
+typedef uint16_t sc_rm_sid_t;
+
+/*!
+ * This type is a used to declare master transaction attributes.
+ */
+typedef uint8_t sc_rm_spa_t;
+
+/*!
+ * This type is used to declare a resource/memory region access permission.
+ * Refer to the XRDC2 Block Guide for more information.
+ */
+typedef uint8_t sc_rm_perm_t;
+
+/* Functions */
+
+/*!
+ * @name Partition Functions
+ * @{
+ */
+
+/*!
+ * This function requests that the SC create a new resource partition.
+ *
+ * @param[in]     ipc          IPC handle
+ * @param[out]    pt           return handle for partition; used for subsequent function
+ *                             calls associated with this partition
+ * @param[in]     secure       boolean indicating if this partition should be secure; only
+ *                             valid if caller is secure
+ * @param[in]     isolated     boolean indicating if this partition should be HW isolated
+ *                             via XRDC; set SC_TRUE if new DID is desired
+ * @param[in]     restricted   boolean indicating if this partition should be restricted; set
+ *                             SC_TRUE if masters in this partition cannot create new partitions
+ * @param[in]     grant        boolean indicating if this partition should always grant
+ *                             access and control to the parent
+ * @param[in]     coherent     boolean indicating if this partition is coherent;
+ *                             set SC_TRUE if only this partition will contain both AP clusters
+ *                             and they will be coherent via the CCI
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_ERR_NOACCESS if caller's partition is restricted,
+ * - SC_ERR_PARM if caller's partition is not secure but a new secure partition is requested,
+ * - SC_ERR_LOCKED if caller's partition is locked,
+ * - SC_ERR_UNAVAILABLE if partition table is full (no more allocation space)
+ *
+ * Marking as non-secure prevents subsequent functions from configuring masters in this
+ * partition to assert the secure signal. If restricted then the new partition is limited
+ * in what functions it can call, especially those associated with managing partitions.
+ *
+ * The grant option is usually used to isolate a bus master's traffic to specific
+ * memory without isolating the peripheral interface of the master or the API
+ * controls of that master.
+ */
+sc_err_t sc_rm_partition_alloc(sc_ipc_t ipc, sc_rm_pt_t *pt, sc_bool_t secure,
+			       sc_bool_t isolated, sc_bool_t restricted,
+			       sc_bool_t grant, sc_bool_t coherent);
+
+/*!
+ * This function makes a partition confidential.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     pt          handle of partition that is granting
+ * @param[in]     retro       retroactive
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_PARM if \a pt out of range,
+ * - SC_ERR_NOACCESS if caller's not allowed to change \a pt
+ * - SC_ERR_LOCKED if partition \a pt is locked
+ *
+ * Call to make a partition confidential. Confidential means only this
+ * partition should be able to grant access permissions to this partition.
+ *
+ * If retroactive, then all resources owned by other partitions will have
+ * access rights for this partition removed, even if locked.
+ */
+sc_err_t sc_rm_set_confidential(sc_ipc_t ipc, sc_rm_pt_t pt, sc_bool_t retro);
+
+/*!
+ * This function frees a partition and assigns all resources to the caller.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     pt          handle of partition to free
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_ERR_NOACCESS if caller's partition is restricted,
+ * - SC_PARM if \a pt out of range or invalid,
+ * - SC_ERR_NOACCESS if \a pt is the SC partition,
+ * - SC_ERR_NOACCESS if caller's partition is not the parent of \a pt,
+ * - SC_ERR_LOCKED if \a pt or caller's partition is locked
+ *
+ * All resources, memory regions, and pads are assigned to the caller/parent.
+ * The partition watchdog is disabled (even if locked). DID is freed.
+ */
+sc_err_t sc_rm_partition_free(sc_ipc_t ipc, sc_rm_pt_t pt);
+
+/*!
+ * This function returns the DID of a partition.
+ *
+ * @param[in]     ipc         IPC handle
+ *
+ * @return Returns the domain ID (DID) of the caller's partition.
+ *
+ * The DID is a SoC-specific internal ID used by the HW resource
+ * protection mechanism. It is only required by clients when using the
+ * SEMA42 module as the DID is sometimes connected to the master ID.
+ */
+sc_rm_did_t sc_rm_get_did(sc_ipc_t ipc);
+
+/*!
+ * This function forces a partition to use a specific static DID.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     pt          handle of partition to assign \a did
+ * @param[in]     did         static DID to assign
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_ERR_NOACCESS if caller's partition is restricted,
+ * - SC_PARM if \a pt or \a did out of range,
+ * - SC_ERR_NOACCESS if caller's partition is not the parent of \a pt,
+ * - SC_ERR_LOCKED if \a pt is locked
+ *
+ * Assumes no assigned resources or memory regions yet! The number of static
+ * DID is fixed by the SC at boot.
+ */
+sc_err_t sc_rm_partition_static(sc_ipc_t ipc, sc_rm_pt_t pt, sc_rm_did_t did);
+
+/*!
+ * This function locks a partition.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     pt          handle of partition to lock
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_PARM if \a pt out of range,
+ * - SC_ERR_NOACCESS if caller's partition is not the parent of \a pt
+ *
+ * If a partition is locked it cannot be freed, have resources/pads assigned
+ * to/from it, memory regions created/assigned, DID changed, or parent changed.
+ */
+sc_err_t sc_rm_partition_lock(sc_ipc_t ipc, sc_rm_pt_t pt);
+
+/*!
+ * This function gets the partition handle of the caller.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[out]    pt          return handle for caller's partition
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ */
+sc_err_t sc_rm_get_partition(sc_ipc_t ipc, sc_rm_pt_t *pt);
+
+/*!
+ * This function sets a new parent for a partition.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     pt          handle of partition for which parent is to be
+ *                            changed
+ * @param[in]     pt_parent   handle of partition to set as parent
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_ERR_NOACCESS if caller's partition is restricted,
+ * - SC_PARM if arguments out of range or invalid,
+ * - SC_ERR_NOACCESS if caller's partition is not the parent of \a pt,
+ * - SC_ERR_LOCKED if either partition is locked
+ */
+sc_err_t sc_rm_set_parent(sc_ipc_t ipc, sc_rm_pt_t pt, sc_rm_pt_t pt_parent);
+
+/*!
+ * This function moves all movable resources/pads owned by a source partition
+ * to a destination partition. It can be used to more quickly set up a new
+ * partition if a majority of the caller's resources are to be moved to a
+ * new partition.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     pt_src      handle of partition from which resources should
+ *                            be moved from
+ * @param[in]     pt_dst      handle of partition to which resources should be
+ *                            moved to
+ * @param[in]     move_rsrc   boolean to indicate if resources should be moved
+ * @param[in]     move_pads   boolean to indicate if pads should be moved
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * By default, all resources are movable. This can be changed using the
+ * sc_rm_set_resource_movable() function. Note all masters defaulted to SMMU
+ * bypass.
+ *
+ * Return errors:
+ * - SC_ERR_NOACCESS if caller's partition is restricted,
+ * - SC_PARM if arguments out of range or invalid,
+ * - SC_ERR_NOACCESS if caller's partition is not \a pt_src or the
+ *   parent of \a pt_src,
+ * - SC_ERR_LOCKED if either partition is locked
+ */
+sc_err_t sc_rm_move_all(sc_ipc_t ipc, sc_rm_pt_t pt_src, sc_rm_pt_t pt_dst,
+			sc_bool_t move_rsrc, sc_bool_t move_pads);
+
+/* @} */
+
+/*!
+ * @name Resource Functions
+ * @{
+ */
+
+/*!
+ * This function assigns ownership of a resource to a partition.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     pt          handle of partition to which resource should be
+ *                            assigned
+ * @param[in]     resource    resource to assign
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * This action resets the resource's master and peripheral attributes.
+ * Privilege attribute will be PASSTHRU, security attribute will be
+ * ASSERT if the partition si secure and NEGATE if it is not, and
+ * masters will defaulted to SMMU bypass. Access permissions will reset
+ * to SEC_RW for the owning partition only for secure partitions, FULL for
+ * non-secure. DEfault is no access by other partitions.
+ *
+ * Return errors:
+ * - SC_ERR_NOACCESS if caller's partition is restricted,
+ * - SC_PARM if arguments out of range or invalid,
+ * - SC_ERR_NOACCESS if caller's partition is not the resource owner or parent
+ *   of the owner,
+ * - SC_ERR_LOCKED if the owning partition or \a pt is locked
+ */
+sc_err_t sc_rm_assign_resource(sc_ipc_t ipc, sc_rm_pt_t pt, sc_rsrc_t resource);
+
+/*!
+ * This function flags resources as movable or not.
+ *
+ * @param[in]     ipc          IPC handle
+ * @param[in]     resource_fst first resource for which flag should be set
+ * @param[in]     resource_lst last resource for which flag should be set
+ * @param[in]     movable      movable flag (SC_TRUE is movable)
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_PARM if resources are out of range,
+ * - SC_ERR_NOACCESS if caller's partition is not a parent of a resource owner,
+ * - SC_ERR_LOCKED if the owning partition is locked
+ *
+ * This function is used to determine the set of resources that will be
+ * moved using the sc_rm_move_all() function. All resources are movable
+ * by default so this function is normally used to prevent a set of
+ * resources from moving.
+ */
+sc_err_t sc_rm_set_resource_movable(sc_ipc_t ipc, sc_rsrc_t resource_fst,
+				    sc_rsrc_t resource_lst, sc_bool_t movable);
+
+/*!
+ * This function flags all of a subsystem's resources as movable
+ * or not.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     resource    resource to use to identify subsystem
+ * @param[in]     movable     movable flag (SC_TRUE is movable)
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_ERR_PARM if a function argument is out of range
+ *
+ * Note \a resource is used to find the associated subsystem. Only
+ * resources owned by the caller are set.
+ */
+sc_err_t sc_rm_set_subsys_rsrc_movable(sc_ipc_t ipc, sc_rsrc_t resource,
+				       sc_bool_t movable);
+
+/*!
+ * This function sets attributes for a resource which is a bus master (i.e.
+ * capable of DMA).
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     resource    master resource for which attributes should apply
+ * @param[in]     sa          security attribute
+ * @param[in]     pa          privilege attribute
+ * @param[in]     smmu_bypass SMMU bypass mode
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_ERR_NOACCESS if caller's partition is restricted,
+ * - SC_PARM if arguments out of range or invalid,
+ * - SC_ERR_NOACCESS if caller's partition is not a parent of the resource owner,
+ * - SC_ERR_LOCKED if the owning partition is locked
+ *
+ * This function configures how the HW isolation will see bus transactions
+ * from the specified master. Note the security attribute will only be
+ * changed if the caller's partition is secure.
+ */
+sc_err_t sc_rm_set_master_attributes(sc_ipc_t ipc, sc_rsrc_t resource,
+				     sc_rm_spa_t sa, sc_rm_spa_t pa,
+				     sc_bool_t smmu_bypass);
+
+/*!
+ * This function sets the StreamID for a resource which is a bus master (i.e.
+ * capable of DMA).
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     resource    master resource for which attributes should apply
+ * @param[in]     sid         StreamID
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_ERR_NOACCESS if caller's partition is restricted,
+ * - SC_PARM if arguments out of range or invalid,
+ * - SC_ERR_NOACCESS if caller's partition is not the resource owner or parent
+ *   of the owner,
+ * - SC_ERR_LOCKED if the owning partition is locked
+ *
+ * This function configures the SID attribute associated with all bus transactions
+ * from this master. Note 0 is not a valid SID as it is reserved to indicate
+ * bypass.
+ */
+sc_err_t sc_rm_set_master_sid(sc_ipc_t ipc, sc_rsrc_t resource,
+			      sc_rm_sid_t sid);
+
+/*!
+ * This function sets access permissions for a peripheral resource.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     resource    peripheral resource for which permissions should apply
+ * @param[in]     pt          handle of partition \a perm should by applied for
+ * @param[in]     perm        permissions to apply to \a resource for \a pt
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_PARM if arguments out of range or invalid,
+ * - SC_ERR_NOACCESS if caller's partition is not the resource owner or parent
+ *   of the owner,
+ * - SC_ERR_LOCKED if the owning partition is locked
+ * - SC_ERR_LOCKED if the \a pt is confidential and the caller isn't \a pt
+ *
+ * This function configures how the HW isolation will restrict access to a
+ * peripheral based on the attributes of a transaction from bus master.
+ */
+sc_err_t sc_rm_set_peripheral_permissions(sc_ipc_t ipc, sc_rsrc_t resource,
+					  sc_rm_pt_t pt, sc_rm_perm_t perm);
+
+/*!
+ * This function gets ownership status of a resource.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     resource    resource to check
+ *
+ * @return Returns a boolean (SC_TRUE if caller's partition owns the resource).
+ *
+ * If \a resource is out of range then SC_FALSE is returned.
+ */
+sc_bool_t sc_rm_is_resource_owned(sc_ipc_t ipc, sc_rsrc_t resource);
+
+/*!
+ * This function is used to test if a resource is a bus master.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     resource    resource to check
+ *
+ * @return Returns a boolean (SC_TRUE if the resource is a bus master).
+ *
+ * If \a resource is out of range then SC_FALSE is returned.
+ */
+sc_bool_t sc_rm_is_resource_master(sc_ipc_t ipc, sc_rsrc_t resource);
+
+/*!
+ * This function is used to test if a resource is a peripheral.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     resource    resource to check
+ *
+ * @return Returns a boolean (SC_TRUE if the resource is a peripheral).
+ *
+ * If \a resource is out of range then SC_FALSE is returned.
+ */
+sc_bool_t sc_rm_is_resource_peripheral(sc_ipc_t ipc, sc_rsrc_t resource);
+
+/*!
+ * This function is used to obtain info about a resource.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     resource    resource to inquire about
+ * @param[out]    sid         pointer to return StreamID
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_PARM if \a resource is out of range
+ */
+sc_err_t sc_rm_get_resource_info(sc_ipc_t ipc, sc_rsrc_t resource,
+				 sc_rm_sid_t *sid);
+
+/* @} */
+
+/*!
+ * @name Memory Region Functions
+ * @{
+ */
+
+/*!
+ * This function requests that the SC create a new memory region.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[out]    mr          return handle for region; used for
+ *                            subsequent function calls
+ *                            associated with this region
+ * @param[in]     addr_start  start address of region (physical)
+ * @param[in]     addr_end    end address of region (physical)
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_ERR_PARM if the new memory region is misaligned,
+ * - SC_ERR_LOCKED if caller's partition is locked,
+ * - SC_ERR_PARM if the new memory region spans multiple existing regions,
+ * - SC_ERR_NOACCESS if caller's partition does not own the memory containing
+ *   the new region,
+ * - SC_ERR_UNAVAILABLE if memory region table is full (no more allocation
+ *   space)
+ *
+ * The area covered by the memory region must currently be owned by the caller.
+ * By default, the new region will have access permission set to allow the
+ * caller to access.
+ */
+sc_err_t sc_rm_memreg_alloc(sc_ipc_t ipc, sc_rm_mr_t *mr,
+			    sc_faddr_t addr_start, sc_faddr_t addr_end);
+
+/*!
+ * This function requests that the SC split a memory region.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     mr          handle of memory region to split
+ * @param[out]    mr_ret      return handle for new region; used for
+ *                            subsequent function calls
+ *                            associated with this region
+ * @param[in]     addr_start  start address of region (physical)
+ * @param[in]     addr_end    end address of region (physical)
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_ERR_PARM if the new memory region is not start/end part of mr,
+ * - SC_ERR_LOCKED if caller's partition is locked,
+ * - SC_ERR_PARM if the new memory region spans multiple existing regions,
+ * - SC_ERR_NOACCESS if caller's partition does not own the memory containing
+ *   the new region,
+ * - SC_ERR_UNAVAILABLE if memory region table is full (no more allocation
+ *   space)
+ *
+ * Note the new region must start or end on the split region.
+ */
+sc_err_t sc_rm_memreg_split(sc_ipc_t ipc, sc_rm_mr_t mr,
+			    sc_rm_mr_t *mr_ret, sc_faddr_t addr_start,
+			    sc_faddr_t addr_end);
+
+/*!
+ * This function frees a memory region.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     mr          handle of memory region to free
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_PARM if \a mr out of range or invalid,
+ * - SC_ERR_NOACCESS if caller's partition is not a parent of \a mr,
+ * - SC_ERR_LOCKED if the owning partition of \a mr is locked
+ */
+sc_err_t sc_rm_memreg_free(sc_ipc_t ipc, sc_rm_mr_t mr);
+
+/*!
+ * Internal SC function to find a memory region.
+ *
+ * @see sc_rm_find_memreg().
+ */
+/*!
+ * This function finds a memory region.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[out]    mr          return handle for region; used for
+ *                            subsequent function calls
+ *                            associated with this region
+ * @param[in]     addr_start  start address of region to search for
+ * @param[in]     addr_end    end address of region to search for
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_ERR_NOTFOUND if region not found,
+ *
+ * Searches only for regions owned by the caller. Finds first
+ * region containing the range specified.
+ */
+sc_err_t sc_rm_find_memreg(sc_ipc_t ipc, sc_rm_mr_t *mr,
+			   sc_faddr_t addr_start, sc_faddr_t addr_end);
+
+/*!
+ * This function assigns ownership of a memory region.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     pt          handle of partition to which memory region
+ *                            should be assigned
+ * @param[in]     mr          handle of memory region to assign
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_PARM if arguments out of range or invalid,
+ * - SC_ERR_NOACCESS if caller's partition is not the \a mr owner or parent
+ *   of the owner,
+ * - SC_ERR_LOCKED if the owning partition or \a pt is locked
+ */
+sc_err_t sc_rm_assign_memreg(sc_ipc_t ipc, sc_rm_pt_t pt, sc_rm_mr_t mr);
+
+/*!
+ * This function sets access permissions for a memory region.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     mr          handle of memory region for which permissions
+ *                            should apply
+ * @param[in]     pt          handle of partition \a perm should by
+ *                            applied for
+ * @param[in]     perm        permissions to apply to \a mr for \a pt
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_PARM if arguments out of range or invalid,
+ * - SC_ERR_NOACCESS if caller's partition is not the region owner or parent
+ *   of the owner,
+ * - SC_ERR_LOCKED if the owning partition is locked
+ * - SC_ERR_LOCKED if the \a pt is confidential and the caller isn't \a pt
+ *
+ * This function configures how the HW isolation will restrict access to a
+ * memory region based on the attributes of a transaction from bus master.
+ */
+sc_err_t sc_rm_set_memreg_permissions(sc_ipc_t ipc, sc_rm_mr_t mr,
+				      sc_rm_pt_t pt, sc_rm_perm_t perm);
+
+/*!
+ * This function gets ownership status of a memory region.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     mr          handle of memory region to check
+ *
+ * @return Returns a boolean (SC_TRUE if caller's partition owns the
+ * memory region).
+ *
+ * If \a mr is out of range then SC_FALSE is returned.
+ */
+sc_bool_t sc_rm_is_memreg_owned(sc_ipc_t ipc, sc_rm_mr_t mr);
+
+/*!
+ * This function is used to obtain info about a memory region.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     mr          handle of memory region to inquire about
+ * @param[out]    addr_start  pointer to return start address
+ * @param[out]    addr_end    pointer to return end address
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_PARM if \a mr is out of range
+ */
+sc_err_t sc_rm_get_memreg_info(sc_ipc_t ipc, sc_rm_mr_t mr,
+			       sc_faddr_t *addr_start, sc_faddr_t *addr_end);
+
+/* @} */
+
+/*!
+ * @name Pad Functions
+ * @{
+ */
+
+/*!
+ * This function assigns ownership of a pad to a partition.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     pt          handle of partition to which pad should
+ *                            be assigned
+ * @param[in]     pad         pad to assign
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_ERR_NOACCESS if caller's partition is restricted,
+ * - SC_PARM if arguments out of range or invalid,
+ * - SC_ERR_NOACCESS if caller's partition is not the pad owner or parent
+ *   of the owner,
+ * - SC_ERR_LOCKED if the owning partition or \a pt is locked
+ */
+sc_err_t sc_rm_assign_pad(sc_ipc_t ipc, sc_rm_pt_t pt, sc_pad_t pad);
+
+/*!
+ * This function flags pads as movable or not.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     pad_fst     first pad for which flag should be set
+ * @param[in]     pad_lst     last pad for which flag should be set
+ * @param[in]     movable     movable flag (SC_TRUE is movable)
+ *
+ * @return Returns an error code (SC_ERR_NONE = success).
+ *
+ * Return errors:
+ * - SC_PARM if pads are out of range,
+ * - SC_ERR_NOACCESS if caller's partition is not a parent of a pad owner,
+ * - SC_ERR_LOCKED if the owning partition is locked
+ *
+ * This function is used to determine the set of pads that will be
+ * moved using the sc_rm_move_all() function. All pads are movable
+ * by default so this function is normally used to prevent a set of
+ * pads from moving.
+ */
+sc_err_t sc_rm_set_pad_movable(sc_ipc_t ipc, sc_pad_t pad_fst,
+			       sc_pad_t pad_lst, sc_bool_t movable);
+
+/*!
+ * This function gets ownership status of a pad.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     pad         pad to check
+ *
+ * @return Returns a boolean (SC_TRUE if caller's partition owns the pad).
+ *
+ * If \a pad is out of range then SC_FALSE is returned.
+ */
+sc_bool_t sc_rm_is_pad_owned(sc_ipc_t ipc, sc_pad_t pad);
+
+/* @} */
+
+/*!
+ * @name Debug Functions
+ * @{
+ */
+
+/*!
+ * This function dumps the RM state for debug.
+ *
+ * @param[in]     ipc         IPC handle
+ */
+void sc_rm_dump(sc_ipc_t ipc);
+
+/* @} */
+
+#endif				/* SC_RM_API_H */
+
+/**@}*/