feat(ls1046a): add new SoC platform ls1046a
The LS1046A is a cost-effective, power-efficient, and highly
integrated system-on-chip (SoC) design that extends the reach
of the NXP value-performance line of QorIQ communications
processors. Featuring power-efficient 64-bit Arm Cortex A72
cores with ECC-protected L1 and L2 cache memories for high
reliability, running up to 1.8 GHz.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: rocket <rod.dorris@nxp.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Change-Id: I208d9bf1702410463c2b2630d31d0cd4eb7e8837
diff --git a/plat/nxp/soc-ls1046a/soc.def b/plat/nxp/soc-ls1046a/soc.def
new file mode 100644
index 0000000..e6b37c0
--- /dev/null
+++ b/plat/nxp/soc-ls1046a/soc.def
@@ -0,0 +1,107 @@
+#
+# Copyright 2022 NXP
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+#
+#------------------------------------------------------------------------------
+#
+# This file contains the basic architecture definitions that drive the build
+#
+# -----------------------------------------------------------------------------
+
+CORE_TYPE := a72
+
+CACHE_LINE := 6
+
+# set to GIC400 or GIC500
+GIC := GIC400
+
+# set to CCI400 or CCN504 or CCN508
+INTERCONNECT := CCI400
+
+# indicate layerscape chassis level - set to 3=LSCH3 or 2=LSCH2
+CHASSIS := 2
+
+# TZC IP Details TZC used is TZC380 or TZC400
+TZC_ID := TZC400
+
+# CONSOLE Details available is NS16550 or PL011
+CONSOLE := NS16550
+
+ # Select the DDR PHY generation to be used
+PLAT_DDR_PHY := PHY_GEN1
+
+PHYS_SYS := 64
+
+# ddr controller - set to MMDC or NXP
+DDRCNTLR := NXP
+
+# ddr phy - set to NXP or SNPS
+DDRPHY := NXP
+
+# Area of OCRAM reserved by ROM code
+NXP_ROM_RSVD := 0x5900
+
+# Max Size of CSF header. Required to define BL2 TEXT LIMIT in soc.def
+# Input to CST create_hdr_esbc tool
+CSF_HDR_SZ := 0x3000
+
+# In IMAGE_BL2, compile time flag for handling Cache coherency
+# with CAAM for BL2 running from OCRAM
+SEC_MEM_NON_COHERENT := yes
+
+# OCRAM MAP
+OCRAM_START_ADDR := 0x10000000
+OCRAM_SIZE := 0x20000
+
+# BL2 binary is placed at start of OCRAM.
+# Also used by create_pbl.mk.
+BL2_BASE := 0x10000000
+
+# After BL2 bin, OCRAM is used by ROM Code:
+# (OCRAM_START_ADDR + BL2_BIN_SIZE) -> (NXP_ROM_RSVD - 1)
+
+# After ROM Code, OCRAM is used by CSF header.
+# (OCRAM_START_ADDR + BL2_TEXT_LIMIT + NXP_ROM_RSVD) -> (CSF_HDR_SZ - 1)
+
+# BL2_HDR_LOC has to be (OCRAM_START_ADDR + OCRAM_SIZE - NXP_ROM_RSVD - CSF_HDR_SZ)
+# This value should be greater than BL2_TEXT_LIMIT
+# Input to CST create_hdr_isbc tool
+BL2_HDR_LOC_HDR ?= $(shell echo $$(( $(OCRAM_START_ADDR) + $(OCRAM_SIZE) - $(NXP_ROM_RSVD) - $(CSF_HDR_SZ))))
+# Covert to HEX to be used by create_pbl.mk
+BL2_HDR_LOC := $$(echo "obase=16; ${BL2_HDR_LOC_HDR}" | bc)
+
+# Core Errata
+ERRATA_A72_859971 := 1
+
+# SoC ERRATAS
+ERRATA_SOC_A008850 := 1
+ERRATA_SOC_A010539 := 1
+
+# DDR Errata
+ERRATA_DDR_A008511 := 1
+ERRATA_DDR_A009803 := 1
+ERRATA_DDR_A009942 := 1
+ERRATA_DDR_A010165 := 1
+
+# enable dynamic memory mapping
+PLAT_XLAT_TABLES_DYNAMIC := 1
+
+# Define Endianness of each module
+NXP_GUR_ENDIANNESS := BE
+NXP_DDR_ENDIANNESS := BE
+NXP_SEC_ENDIANNESS := BE
+NXP_SFP_ENDIANNESS := BE
+NXP_SNVS_ENDIANNESS := BE
+NXP_ESDHC_ENDIANNESS := BE
+NXP_QSPI_ENDIANNESS := BE
+NXP_FSPI_ENDIANNESS := BE
+NXP_SCFG_ENDIANNESS := BE
+NXP_GPIO_ENDIANNESS := BE
+NXP_IFC_ENDIANNESS := BE
+
+NXP_SFP_VER := 3_2
+
+# OCRAM ECC Enabled
+OCRAM_ECC_EN := yes