diff --git a/include/lib/libfdt/libfdt.h b/include/lib/libfdt/libfdt.h
new file mode 100644
index 0000000..830b77e
--- /dev/null
+++ b/include/lib/libfdt/libfdt.h
@@ -0,0 +1,1960 @@
+#ifndef LIBFDT_H
+#define LIBFDT_H
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2006 David Gibson, IBM Corporation.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ *  b) Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *     1. Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *     2. Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ *     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ *     CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ *     INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *     MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ *     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ *     CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *     NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ *     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ *     HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ *     CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ *     OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ *     EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <libfdt_env.h>
+#include <fdt.h>
+
+#define FDT_FIRST_SUPPORTED_VERSION	0x02
+#define FDT_LAST_SUPPORTED_VERSION	0x11
+
+/* Error codes: informative error codes */
+#define FDT_ERR_NOTFOUND	1
+	/* FDT_ERR_NOTFOUND: The requested node or property does not exist */
+#define FDT_ERR_EXISTS		2
+	/* FDT_ERR_EXISTS: Attempted to create a node or property which
+	 * already exists */
+#define FDT_ERR_NOSPACE		3
+	/* FDT_ERR_NOSPACE: Operation needed to expand the device
+	 * tree, but its buffer did not have sufficient space to
+	 * contain the expanded tree. Use fdt_open_into() to move the
+	 * device tree to a buffer with more space. */
+
+/* Error codes: codes for bad parameters */
+#define FDT_ERR_BADOFFSET	4
+	/* FDT_ERR_BADOFFSET: Function was passed a structure block
+	 * offset which is out-of-bounds, or which points to an
+	 * unsuitable part of the structure for the operation. */
+#define FDT_ERR_BADPATH		5
+	/* FDT_ERR_BADPATH: Function was passed a badly formatted path
+	 * (e.g. missing a leading / for a function which requires an
+	 * absolute path) */
+#define FDT_ERR_BADPHANDLE	6
+	/* FDT_ERR_BADPHANDLE: Function was passed an invalid phandle.
+	 * This can be caused either by an invalid phandle property
+	 * length, or the phandle value was either 0 or -1, which are
+	 * not permitted. */
+#define FDT_ERR_BADSTATE	7
+	/* FDT_ERR_BADSTATE: Function was passed an incomplete device
+	 * tree created by the sequential-write functions, which is
+	 * not sufficiently complete for the requested operation. */
+
+/* Error codes: codes for bad device tree blobs */
+#define FDT_ERR_TRUNCATED	8
+	/* FDT_ERR_TRUNCATED: FDT or a sub-block is improperly
+	 * terminated (overflows, goes outside allowed bounds, or
+	 * isn't properly terminated).  */
+#define FDT_ERR_BADMAGIC	9
+	/* FDT_ERR_BADMAGIC: Given "device tree" appears not to be a
+	 * device tree at all - it is missing the flattened device
+	 * tree magic number. */
+#define FDT_ERR_BADVERSION	10
+	/* FDT_ERR_BADVERSION: Given device tree has a version which
+	 * can't be handled by the requested operation.  For
+	 * read-write functions, this may mean that fdt_open_into() is
+	 * required to convert the tree to the expected version. */
+#define FDT_ERR_BADSTRUCTURE	11
+	/* FDT_ERR_BADSTRUCTURE: Given device tree has a corrupt
+	 * structure block or other serious error (e.g. misnested
+	 * nodes, or subnodes preceding properties). */
+#define FDT_ERR_BADLAYOUT	12
+	/* FDT_ERR_BADLAYOUT: For read-write functions, the given
+	 * device tree has it's sub-blocks in an order that the
+	 * function can't handle (memory reserve map, then structure,
+	 * then strings).  Use fdt_open_into() to reorganize the tree
+	 * into a form suitable for the read-write operations. */
+
+/* "Can't happen" error indicating a bug in libfdt */
+#define FDT_ERR_INTERNAL	13
+	/* FDT_ERR_INTERNAL: libfdt has failed an internal assertion.
+	 * Should never be returned, if it is, it indicates a bug in
+	 * libfdt itself. */
+
+/* Errors in device tree content */
+#define FDT_ERR_BADNCELLS	14
+	/* FDT_ERR_BADNCELLS: Device tree has a #address-cells, #size-cells
+	 * or similar property with a bad format or value */
+
+#define FDT_ERR_BADVALUE	15
+	/* FDT_ERR_BADVALUE: Device tree has a property with an unexpected
+	 * value. For example: a property expected to contain a string list
+	 * is not NUL-terminated within the length of its value. */
+
+#define FDT_ERR_BADOVERLAY	16
+	/* FDT_ERR_BADOVERLAY: The device tree overlay, while
+	 * correctly structured, cannot be applied due to some
+	 * unexpected or missing value, property or node. */
+
+#define FDT_ERR_NOPHANDLES	17
+	/* FDT_ERR_NOPHANDLES: The device tree doesn't have any
+	 * phandle available anymore without causing an overflow */
+
+#define FDT_ERR_MAX		17
+
+/**********************************************************************/
+/* Low-level functions (you probably don't need these)                */
+/**********************************************************************/
+
+#ifndef SWIG /* This function is not useful in Python */
+const void *fdt_offset_ptr(const void *fdt, int offset, unsigned int checklen);
+#endif
+static inline void *fdt_offset_ptr_w(void *fdt, int offset, int checklen)
+{
+	return (void *)(uintptr_t)fdt_offset_ptr(fdt, offset, checklen);
+}
+
+uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset);
+
+/*
+ * Alignment helpers:
+ *     These helpers access words from a device tree blob.  They're
+ *     built to work even with unaligned pointers on platforms (ike
+ *     ARM) that don't like unaligned loads and stores
+ */
+
+static inline uint32_t fdt32_ld(const fdt32_t *p)
+{
+	fdt32_t v;
+
+	memcpy(&v, p, sizeof(v));
+	return fdt32_to_cpu(v);
+}
+
+static inline uint64_t fdt64_ld(const fdt64_t *p)
+{
+	fdt64_t v;
+
+	memcpy(&v, p, sizeof(v));
+	return fdt64_to_cpu(v);
+}
+
+/**********************************************************************/
+/* Traversal functions                                                */
+/**********************************************************************/
+
+int fdt_next_node(const void *fdt, int offset, int *depth);
+
+/**
+ * fdt_first_subnode() - get offset of first direct subnode
+ *
+ * @fdt:	FDT blob
+ * @offset:	Offset of node to check
+ * @return offset of first subnode, or -FDT_ERR_NOTFOUND if there is none
+ */
+int fdt_first_subnode(const void *fdt, int offset);
+
+/**
+ * fdt_next_subnode() - get offset of next direct subnode
+ *
+ * After first calling fdt_first_subnode(), call this function repeatedly to
+ * get direct subnodes of a parent node.
+ *
+ * @fdt:	FDT blob
+ * @offset:	Offset of previous subnode
+ * @return offset of next subnode, or -FDT_ERR_NOTFOUND if there are no more
+ * subnodes
+ */
+int fdt_next_subnode(const void *fdt, int offset);
+
+/**
+ * fdt_for_each_subnode - iterate over all subnodes of a parent
+ *
+ * @node:	child node (int, lvalue)
+ * @fdt:	FDT blob (const void *)
+ * @parent:	parent node (int)
+ *
+ * This is actually a wrapper around a for loop and would be used like so:
+ *
+ *	fdt_for_each_subnode(node, fdt, parent) {
+ *		Use node
+ *		...
+ *	}
+ *
+ *	if ((node < 0) && (node != -FDT_ERR_NOT_FOUND)) {
+ *		Error handling
+ *	}
+ *
+ * Note that this is implemented as a macro and @node is used as
+ * iterator in the loop. The parent variable be constant or even a
+ * literal.
+ *
+ */
+#define fdt_for_each_subnode(node, fdt, parent)		\
+	for (node = fdt_first_subnode(fdt, parent);	\
+	     node >= 0;					\
+	     node = fdt_next_subnode(fdt, node))
+
+/**********************************************************************/
+/* General functions                                                  */
+/**********************************************************************/
+#define fdt_get_header(fdt, field) \
+	(fdt32_ld(&((const struct fdt_header *)(fdt))->field))
+#define fdt_magic(fdt)			(fdt_get_header(fdt, magic))
+#define fdt_totalsize(fdt)		(fdt_get_header(fdt, totalsize))
+#define fdt_off_dt_struct(fdt)		(fdt_get_header(fdt, off_dt_struct))
+#define fdt_off_dt_strings(fdt)		(fdt_get_header(fdt, off_dt_strings))
+#define fdt_off_mem_rsvmap(fdt)		(fdt_get_header(fdt, off_mem_rsvmap))
+#define fdt_version(fdt)		(fdt_get_header(fdt, version))
+#define fdt_last_comp_version(fdt)	(fdt_get_header(fdt, last_comp_version))
+#define fdt_boot_cpuid_phys(fdt)	(fdt_get_header(fdt, boot_cpuid_phys))
+#define fdt_size_dt_strings(fdt)	(fdt_get_header(fdt, size_dt_strings))
+#define fdt_size_dt_struct(fdt)		(fdt_get_header(fdt, size_dt_struct))
+
+#define fdt_set_hdr_(name) \
+	static inline void fdt_set_##name(void *fdt, uint32_t val) \
+	{ \
+		struct fdt_header *fdth = (struct fdt_header *)fdt; \
+		fdth->name = cpu_to_fdt32(val); \
+	}
+fdt_set_hdr_(magic);
+fdt_set_hdr_(totalsize);
+fdt_set_hdr_(off_dt_struct);
+fdt_set_hdr_(off_dt_strings);
+fdt_set_hdr_(off_mem_rsvmap);
+fdt_set_hdr_(version);
+fdt_set_hdr_(last_comp_version);
+fdt_set_hdr_(boot_cpuid_phys);
+fdt_set_hdr_(size_dt_strings);
+fdt_set_hdr_(size_dt_struct);
+#undef fdt_set_hdr_
+
+/**
+ * fdt_header_size - return the size of the tree's header
+ * @fdt: pointer to a flattened device tree
+ */
+size_t fdt_header_size_(uint32_t version);
+static inline size_t fdt_header_size(const void *fdt)
+{
+	return fdt_header_size_(fdt_version(fdt));
+}
+
+/**
+ * fdt_check_header - sanity check a device tree header
+
+ * @fdt: pointer to data which might be a flattened device tree
+ *
+ * fdt_check_header() checks that the given buffer contains what
+ * appears to be a flattened device tree, and that the header contains
+ * valid information (to the extent that can be determined from the
+ * header alone).
+ *
+ * returns:
+ *     0, if the buffer appears to contain a valid device tree
+ *     -FDT_ERR_BADMAGIC,
+ *     -FDT_ERR_BADVERSION,
+ *     -FDT_ERR_BADSTATE,
+ *     -FDT_ERR_TRUNCATED, standard meanings, as above
+ */
+int fdt_check_header(const void *fdt);
+
+/**
+ * fdt_move - move a device tree around in memory
+ * @fdt: pointer to the device tree to move
+ * @buf: pointer to memory where the device is to be moved
+ * @bufsize: size of the memory space at buf
+ *
+ * fdt_move() relocates, if possible, the device tree blob located at
+ * fdt to the buffer at buf of size bufsize.  The buffer may overlap
+ * with the existing device tree blob at fdt.  Therefore,
+ *     fdt_move(fdt, fdt, fdt_totalsize(fdt))
+ * should always succeed.
+ *
+ * returns:
+ *     0, on success
+ *     -FDT_ERR_NOSPACE, bufsize is insufficient to contain the device tree
+ *     -FDT_ERR_BADMAGIC,
+ *     -FDT_ERR_BADVERSION,
+ *     -FDT_ERR_BADSTATE, standard meanings
+ */
+int fdt_move(const void *fdt, void *buf, int bufsize);
+
+/**********************************************************************/
+/* Read-only functions                                                */
+/**********************************************************************/
+
+int fdt_check_full(const void *fdt, size_t bufsize);
+
+/**
+ * fdt_get_string - retrieve a string from the strings block of a device tree
+ * @fdt: pointer to the device tree blob
+ * @stroffset: offset of the string within the strings block (native endian)
+ * @lenp: optional pointer to return the string's length
+ *
+ * fdt_get_string() retrieves a pointer to a single string from the
+ * strings block of the device tree blob at fdt, and optionally also
+ * returns the string's length in *lenp.
+ *
+ * returns:
+ *     a pointer to the string, on success
+ *     NULL, if stroffset is out of bounds, or doesn't point to a valid string
+ */
+const char *fdt_get_string(const void *fdt, int stroffset, int *lenp);
+
+/**
+ * fdt_string - retrieve a string from the strings block of a device tree
+ * @fdt: pointer to the device tree blob
+ * @stroffset: offset of the string within the strings block (native endian)
+ *
+ * fdt_string() retrieves a pointer to a single string from the
+ * strings block of the device tree blob at fdt.
+ *
+ * returns:
+ *     a pointer to the string, on success
+ *     NULL, if stroffset is out of bounds, or doesn't point to a valid string
+ */
+const char *fdt_string(const void *fdt, int stroffset);
+
+/**
+ * fdt_get_max_phandle - retrieves the highest phandle in a tree
+ * @fdt: pointer to the device tree blob
+ *
+ * fdt_get_max_phandle retrieves the highest phandle in the given
+ * device tree. This will ignore badly formatted phandles, or phandles
+ * with a value of 0 or -1.
+ *
+ * returns:
+ *      the highest phandle on success
+ *      0, if no phandle was found in the device tree
+ *      -1, if an error occurred
+ */
+uint32_t fdt_get_max_phandle(const void *fdt);
+
+/**
+ * fdt_num_mem_rsv - retrieve the number of memory reserve map entries
+ * @fdt: pointer to the device tree blob
+ *
+ * Returns the number of entries in the device tree blob's memory
+ * reservation map.  This does not include the terminating 0,0 entry
+ * or any other (0,0) entries reserved for expansion.
+ *
+ * returns:
+ *     the number of entries
+ */
+int fdt_num_mem_rsv(const void *fdt);
+
+/**
+ * fdt_get_mem_rsv - retrieve one memory reserve map entry
+ * @fdt: pointer to the device tree blob
+ * @address, @size: pointers to 64-bit variables
+ *
+ * On success, *address and *size will contain the address and size of
+ * the n-th reserve map entry from the device tree blob, in
+ * native-endian format.
+ *
+ * returns:
+ *     0, on success
+ *     -FDT_ERR_BADMAGIC,
+ *     -FDT_ERR_BADVERSION,
+ *     -FDT_ERR_BADSTATE, standard meanings
+ */
+int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size);
+
+/**
+ * fdt_subnode_offset_namelen - find a subnode based on substring
+ * @fdt: pointer to the device tree blob
+ * @parentoffset: structure block offset of a node
+ * @name: name of the subnode to locate
+ * @namelen: number of characters of name to consider
+ *
+ * Identical to fdt_subnode_offset(), but only examine the first
+ * namelen characters of name for matching the subnode name.  This is
+ * useful for finding subnodes based on a portion of a larger string,
+ * such as a full path.
+ */
+#ifndef SWIG /* Not available in Python */
+int fdt_subnode_offset_namelen(const void *fdt, int parentoffset,
+			       const char *name, int namelen);
+#endif
+/**
+ * fdt_subnode_offset - find a subnode of a given node
+ * @fdt: pointer to the device tree blob
+ * @parentoffset: structure block offset of a node
+ * @name: name of the subnode to locate
+ *
+ * fdt_subnode_offset() finds a subnode of the node at structure block
+ * offset parentoffset with the given name.  name may include a unit
+ * address, in which case fdt_subnode_offset() will find the subnode
+ * with that unit address, or the unit address may be omitted, in
+ * which case fdt_subnode_offset() will find an arbitrary subnode
+ * whose name excluding unit address matches the given name.
+ *
+ * returns:
+ *	structure block offset of the requested subnode (>=0), on success
+ *	-FDT_ERR_NOTFOUND, if the requested subnode does not exist
+ *	-FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE
+ *		tag
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_TRUNCATED, standard meanings.
+ */
+int fdt_subnode_offset(const void *fdt, int parentoffset, const char *name);
+
+/**
+ * fdt_path_offset_namelen - find a tree node by its full path
+ * @fdt: pointer to the device tree blob
+ * @path: full path of the node to locate
+ * @namelen: number of characters of path to consider
+ *
+ * Identical to fdt_path_offset(), but only consider the first namelen
+ * characters of path as the path name.
+ */
+#ifndef SWIG /* Not available in Python */
+int fdt_path_offset_namelen(const void *fdt, const char *path, int namelen);
+#endif
+
+/**
+ * fdt_path_offset - find a tree node by its full path
+ * @fdt: pointer to the device tree blob
+ * @path: full path of the node to locate
+ *
+ * fdt_path_offset() finds a node of a given path in the device tree.
+ * Each path component may omit the unit address portion, but the
+ * results of this are undefined if any such path component is
+ * ambiguous (that is if there are multiple nodes at the relevant
+ * level matching the given component, differentiated only by unit
+ * address).
+ *
+ * returns:
+ *	structure block offset of the node with the requested path (>=0), on
+ *		success
+ *	-FDT_ERR_BADPATH, given path does not begin with '/' or is invalid
+ *	-FDT_ERR_NOTFOUND, if the requested node does not exist
+ *      -FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_TRUNCATED, standard meanings.
+ */
+int fdt_path_offset(const void *fdt, const char *path);
+
+/**
+ * fdt_get_name - retrieve the name of a given node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: structure block offset of the starting node
+ * @lenp: pointer to an integer variable (will be overwritten) or NULL
+ *
+ * fdt_get_name() retrieves the name (including unit address) of the
+ * device tree node at structure block offset nodeoffset.  If lenp is
+ * non-NULL, the length of this name is also returned, in the integer
+ * pointed to by lenp.
+ *
+ * returns:
+ *	pointer to the node's name, on success
+ *		If lenp is non-NULL, *lenp contains the length of that name
+ *			(>=0)
+ *	NULL, on error
+ *		if lenp is non-NULL *lenp contains an error code (<0):
+ *		-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE
+ *			tag
+ *		-FDT_ERR_BADMAGIC,
+ *		-FDT_ERR_BADVERSION,
+ *		-FDT_ERR_BADSTATE, standard meanings
+ */
+const char *fdt_get_name(const void *fdt, int nodeoffset, int *lenp);
+
+/**
+ * fdt_first_property_offset - find the offset of a node's first property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: structure block offset of a node
+ *
+ * fdt_first_property_offset() finds the first property of the node at
+ * the given structure block offset.
+ *
+ * returns:
+ *	structure block offset of the property (>=0), on success
+ *	-FDT_ERR_NOTFOUND, if the requested node has no properties
+ *	-FDT_ERR_BADOFFSET, if nodeoffset did not point to an FDT_BEGIN_NODE tag
+ *      -FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_TRUNCATED, standard meanings.
+ */
+int fdt_first_property_offset(const void *fdt, int nodeoffset);
+
+/**
+ * fdt_next_property_offset - step through a node's properties
+ * @fdt: pointer to the device tree blob
+ * @offset: structure block offset of a property
+ *
+ * fdt_next_property_offset() finds the property immediately after the
+ * one at the given structure block offset.  This will be a property
+ * of the same node as the given property.
+ *
+ * returns:
+ *	structure block offset of the next property (>=0), on success
+ *	-FDT_ERR_NOTFOUND, if the given property is the last in its node
+ *	-FDT_ERR_BADOFFSET, if nodeoffset did not point to an FDT_PROP tag
+ *      -FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_TRUNCATED, standard meanings.
+ */
+int fdt_next_property_offset(const void *fdt, int offset);
+
+/**
+ * fdt_for_each_property_offset - iterate over all properties of a node
+ *
+ * @property_offset:	property offset (int, lvalue)
+ * @fdt:		FDT blob (const void *)
+ * @node:		node offset (int)
+ *
+ * This is actually a wrapper around a for loop and would be used like so:
+ *
+ *	fdt_for_each_property_offset(property, fdt, node) {
+ *		Use property
+ *		...
+ *	}
+ *
+ *	if ((property < 0) && (property != -FDT_ERR_NOT_FOUND)) {
+ *		Error handling
+ *	}
+ *
+ * Note that this is implemented as a macro and property is used as
+ * iterator in the loop. The node variable can be constant or even a
+ * literal.
+ */
+#define fdt_for_each_property_offset(property, fdt, node)	\
+	for (property = fdt_first_property_offset(fdt, node);	\
+	     property >= 0;					\
+	     property = fdt_next_property_offset(fdt, property))
+
+/**
+ * fdt_get_property_by_offset - retrieve the property at a given offset
+ * @fdt: pointer to the device tree blob
+ * @offset: offset of the property to retrieve
+ * @lenp: pointer to an integer variable (will be overwritten) or NULL
+ *
+ * fdt_get_property_by_offset() retrieves a pointer to the
+ * fdt_property structure within the device tree blob at the given
+ * offset.  If lenp is non-NULL, the length of the property value is
+ * also returned, in the integer pointed to by lenp.
+ *
+ * Note that this code only works on device tree versions >= 16. fdt_getprop()
+ * works on all versions.
+ *
+ * returns:
+ *	pointer to the structure representing the property
+ *		if lenp is non-NULL, *lenp contains the length of the property
+ *		value (>=0)
+ *	NULL, on error
+ *		if lenp is non-NULL, *lenp contains an error code (<0):
+ *		-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_PROP tag
+ *		-FDT_ERR_BADMAGIC,
+ *		-FDT_ERR_BADVERSION,
+ *		-FDT_ERR_BADSTATE,
+ *		-FDT_ERR_BADSTRUCTURE,
+ *		-FDT_ERR_TRUNCATED, standard meanings
+ */
+const struct fdt_property *fdt_get_property_by_offset(const void *fdt,
+						      int offset,
+						      int *lenp);
+
+/**
+ * fdt_get_property_namelen - find a property based on substring
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to find
+ * @name: name of the property to find
+ * @namelen: number of characters of name to consider
+ * @lenp: pointer to an integer variable (will be overwritten) or NULL
+ *
+ * Identical to fdt_get_property(), but only examine the first namelen
+ * characters of name for matching the property name.
+ */
+#ifndef SWIG /* Not available in Python */
+const struct fdt_property *fdt_get_property_namelen(const void *fdt,
+						    int nodeoffset,
+						    const char *name,
+						    int namelen, int *lenp);
+#endif
+
+/**
+ * fdt_get_property - find a given property in a given node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to find
+ * @name: name of the property to find
+ * @lenp: pointer to an integer variable (will be overwritten) or NULL
+ *
+ * fdt_get_property() retrieves a pointer to the fdt_property
+ * structure within the device tree blob corresponding to the property
+ * named 'name' of the node at offset nodeoffset.  If lenp is
+ * non-NULL, the length of the property value is also returned, in the
+ * integer pointed to by lenp.
+ *
+ * returns:
+ *	pointer to the structure representing the property
+ *		if lenp is non-NULL, *lenp contains the length of the property
+ *		value (>=0)
+ *	NULL, on error
+ *		if lenp is non-NULL, *lenp contains an error code (<0):
+ *		-FDT_ERR_NOTFOUND, node does not have named property
+ *		-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE
+ *			tag
+ *		-FDT_ERR_BADMAGIC,
+ *		-FDT_ERR_BADVERSION,
+ *		-FDT_ERR_BADSTATE,
+ *		-FDT_ERR_BADSTRUCTURE,
+ *		-FDT_ERR_TRUNCATED, standard meanings
+ */
+const struct fdt_property *fdt_get_property(const void *fdt, int nodeoffset,
+					    const char *name, int *lenp);
+static inline struct fdt_property *fdt_get_property_w(void *fdt, int nodeoffset,
+						      const char *name,
+						      int *lenp)
+{
+	return (struct fdt_property *)(uintptr_t)
+		fdt_get_property(fdt, nodeoffset, name, lenp);
+}
+
+/**
+ * fdt_getprop_by_offset - retrieve the value of a property at a given offset
+ * @fdt: pointer to the device tree blob
+ * @ffset: offset of the property to read
+ * @namep: pointer to a string variable (will be overwritten) or NULL
+ * @lenp: pointer to an integer variable (will be overwritten) or NULL
+ *
+ * fdt_getprop_by_offset() retrieves a pointer to the value of the
+ * property at structure block offset 'offset' (this will be a pointer
+ * to within the device blob itself, not a copy of the value).  If
+ * lenp is non-NULL, the length of the property value is also
+ * returned, in the integer pointed to by lenp.  If namep is non-NULL,
+ * the property's namne will also be returned in the char * pointed to
+ * by namep (this will be a pointer to within the device tree's string
+ * block, not a new copy of the name).
+ *
+ * returns:
+ *	pointer to the property's value
+ *		if lenp is non-NULL, *lenp contains the length of the property
+ *		value (>=0)
+ *		if namep is non-NULL *namep contiains a pointer to the property
+ *		name.
+ *	NULL, on error
+ *		if lenp is non-NULL, *lenp contains an error code (<0):
+ *		-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_PROP tag
+ *		-FDT_ERR_BADMAGIC,
+ *		-FDT_ERR_BADVERSION,
+ *		-FDT_ERR_BADSTATE,
+ *		-FDT_ERR_BADSTRUCTURE,
+ *		-FDT_ERR_TRUNCATED, standard meanings
+ */
+#ifndef SWIG /* This function is not useful in Python */
+const void *fdt_getprop_by_offset(const void *fdt, int offset,
+				  const char **namep, int *lenp);
+#endif
+
+/**
+ * fdt_getprop_namelen - get property value based on substring
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to find
+ * @name: name of the property to find
+ * @namelen: number of characters of name to consider
+ * @lenp: pointer to an integer variable (will be overwritten) or NULL
+ *
+ * Identical to fdt_getprop(), but only examine the first namelen
+ * characters of name for matching the property name.
+ */
+#ifndef SWIG /* Not available in Python */
+const void *fdt_getprop_namelen(const void *fdt, int nodeoffset,
+				const char *name, int namelen, int *lenp);
+static inline void *fdt_getprop_namelen_w(void *fdt, int nodeoffset,
+					  const char *name, int namelen,
+					  int *lenp)
+{
+	return (void *)(uintptr_t)fdt_getprop_namelen(fdt, nodeoffset, name,
+						      namelen, lenp);
+}
+#endif
+
+/**
+ * fdt_getprop - retrieve the value of a given property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to find
+ * @name: name of the property to find
+ * @lenp: pointer to an integer variable (will be overwritten) or NULL
+ *
+ * fdt_getprop() retrieves a pointer to the value of the property
+ * named 'name' of the node at offset nodeoffset (this will be a
+ * pointer to within the device blob itself, not a copy of the value).
+ * If lenp is non-NULL, the length of the property value is also
+ * returned, in the integer pointed to by lenp.
+ *
+ * returns:
+ *	pointer to the property's value
+ *		if lenp is non-NULL, *lenp contains the length of the property
+ *		value (>=0)
+ *	NULL, on error
+ *		if lenp is non-NULL, *lenp contains an error code (<0):
+ *		-FDT_ERR_NOTFOUND, node does not have named property
+ *		-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE
+ *			tag
+ *		-FDT_ERR_BADMAGIC,
+ *		-FDT_ERR_BADVERSION,
+ *		-FDT_ERR_BADSTATE,
+ *		-FDT_ERR_BADSTRUCTURE,
+ *		-FDT_ERR_TRUNCATED, standard meanings
+ */
+const void *fdt_getprop(const void *fdt, int nodeoffset,
+			const char *name, int *lenp);
+static inline void *fdt_getprop_w(void *fdt, int nodeoffset,
+				  const char *name, int *lenp)
+{
+	return (void *)(uintptr_t)fdt_getprop(fdt, nodeoffset, name, lenp);
+}
+
+/**
+ * fdt_get_phandle - retrieve the phandle of a given node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: structure block offset of the node
+ *
+ * fdt_get_phandle() retrieves the phandle of the device tree node at
+ * structure block offset nodeoffset.
+ *
+ * returns:
+ *	the phandle of the node at nodeoffset, on success (!= 0, != -1)
+ *	0, if the node has no phandle, or another error occurs
+ */
+uint32_t fdt_get_phandle(const void *fdt, int nodeoffset);
+
+/**
+ * fdt_get_alias_namelen - get alias based on substring
+ * @fdt: pointer to the device tree blob
+ * @name: name of the alias th look up
+ * @namelen: number of characters of name to consider
+ *
+ * Identical to fdt_get_alias(), but only examine the first namelen
+ * characters of name for matching the alias name.
+ */
+#ifndef SWIG /* Not available in Python */
+const char *fdt_get_alias_namelen(const void *fdt,
+				  const char *name, int namelen);
+#endif
+
+/**
+ * fdt_get_alias - retrieve the path referenced by a given alias
+ * @fdt: pointer to the device tree blob
+ * @name: name of the alias th look up
+ *
+ * fdt_get_alias() retrieves the value of a given alias.  That is, the
+ * value of the property named 'name' in the node /aliases.
+ *
+ * returns:
+ *	a pointer to the expansion of the alias named 'name', if it exists
+ *	NULL, if the given alias or the /aliases node does not exist
+ */
+const char *fdt_get_alias(const void *fdt, const char *name);
+
+/**
+ * fdt_get_path - determine the full path of a node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose path to find
+ * @buf: character buffer to contain the returned path (will be overwritten)
+ * @buflen: size of the character buffer at buf
+ *
+ * fdt_get_path() computes the full path of the node at offset
+ * nodeoffset, and records that path in the buffer at buf.
+ *
+ * NOTE: This function is expensive, as it must scan the device tree
+ * structure from the start to nodeoffset.
+ *
+ * returns:
+ *	0, on success
+ *		buf contains the absolute path of the node at
+ *		nodeoffset, as a NUL-terminated string.
+ *	-FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ *	-FDT_ERR_NOSPACE, the path of the given node is longer than (bufsize-1)
+ *		characters and will not fit in the given buffer.
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen);
+
+/**
+ * fdt_supernode_atdepth_offset - find a specific ancestor of a node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose parent to find
+ * @supernodedepth: depth of the ancestor to find
+ * @nodedepth: pointer to an integer variable (will be overwritten) or NULL
+ *
+ * fdt_supernode_atdepth_offset() finds an ancestor of the given node
+ * at a specific depth from the root (where the root itself has depth
+ * 0, its immediate subnodes depth 1 and so forth).  So
+ *	fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, NULL);
+ * will always return 0, the offset of the root node.  If the node at
+ * nodeoffset has depth D, then:
+ *	fdt_supernode_atdepth_offset(fdt, nodeoffset, D, NULL);
+ * will return nodeoffset itself.
+ *
+ * NOTE: This function is expensive, as it must scan the device tree
+ * structure from the start to nodeoffset.
+ *
+ * returns:
+ *	structure block offset of the node at node offset's ancestor
+ *		of depth supernodedepth (>=0), on success
+ *	-FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ *	-FDT_ERR_NOTFOUND, supernodedepth was greater than the depth of
+ *		nodeoffset
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset,
+				 int supernodedepth, int *nodedepth);
+
+/**
+ * fdt_node_depth - find the depth of a given node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose parent to find
+ *
+ * fdt_node_depth() finds the depth of a given node.  The root node
+ * has depth 0, its immediate subnodes depth 1 and so forth.
+ *
+ * NOTE: This function is expensive, as it must scan the device tree
+ * structure from the start to nodeoffset.
+ *
+ * returns:
+ *	depth of the node at nodeoffset (>=0), on success
+ *	-FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_node_depth(const void *fdt, int nodeoffset);
+
+/**
+ * fdt_parent_offset - find the parent of a given node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose parent to find
+ *
+ * fdt_parent_offset() locates the parent node of a given node (that
+ * is, it finds the offset of the node which contains the node at
+ * nodeoffset as a subnode).
+ *
+ * NOTE: This function is expensive, as it must scan the device tree
+ * structure from the start to nodeoffset, *twice*.
+ *
+ * returns:
+ *	structure block offset of the parent of the node at nodeoffset
+ *		(>=0), on success
+ *	-FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_parent_offset(const void *fdt, int nodeoffset);
+
+/**
+ * fdt_node_offset_by_prop_value - find nodes with a given property value
+ * @fdt: pointer to the device tree blob
+ * @startoffset: only find nodes after this offset
+ * @propname: property name to check
+ * @propval: property value to search for
+ * @proplen: length of the value in propval
+ *
+ * fdt_node_offset_by_prop_value() returns the offset of the first
+ * node after startoffset, which has a property named propname whose
+ * value is of length proplen and has value equal to propval; or if
+ * startoffset is -1, the very first such node in the tree.
+ *
+ * To iterate through all nodes matching the criterion, the following
+ * idiom can be used:
+ *	offset = fdt_node_offset_by_prop_value(fdt, -1, propname,
+ *					       propval, proplen);
+ *	while (offset != -FDT_ERR_NOTFOUND) {
+ *		// other code here
+ *		offset = fdt_node_offset_by_prop_value(fdt, offset, propname,
+ *						       propval, proplen);
+ *	}
+ *
+ * Note the -1 in the first call to the function, if 0 is used here
+ * instead, the function will never locate the root node, even if it
+ * matches the criterion.
+ *
+ * returns:
+ *	structure block offset of the located node (>= 0, >startoffset),
+ *		 on success
+ *	-FDT_ERR_NOTFOUND, no node matching the criterion exists in the
+ *		tree after startoffset
+ *	-FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_node_offset_by_prop_value(const void *fdt, int startoffset,
+				  const char *propname,
+				  const void *propval, int proplen);
+
+/**
+ * fdt_node_offset_by_phandle - find the node with a given phandle
+ * @fdt: pointer to the device tree blob
+ * @phandle: phandle value
+ *
+ * fdt_node_offset_by_phandle() returns the offset of the node
+ * which has the given phandle value.  If there is more than one node
+ * in the tree with the given phandle (an invalid tree), results are
+ * undefined.
+ *
+ * returns:
+ *	structure block offset of the located node (>= 0), on success
+ *	-FDT_ERR_NOTFOUND, no node with that phandle exists
+ *	-FDT_ERR_BADPHANDLE, given phandle value was invalid (0 or -1)
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle);
+
+/**
+ * fdt_node_check_compatible: check a node's compatible property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of a tree node
+ * @compatible: string to match against
+ *
+ *
+ * fdt_node_check_compatible() returns 0 if the given node contains a
+ * 'compatible' property with the given string as one of its elements,
+ * it returns non-zero otherwise, or on error.
+ *
+ * returns:
+ *	0, if the node has a 'compatible' property listing the given string
+ *	1, if the node has a 'compatible' property, but it does not list
+ *		the given string
+ *	-FDT_ERR_NOTFOUND, if the given node has no 'compatible' property
+ *	-FDT_ERR_BADOFFSET, if nodeoffset does not refer to a BEGIN_NODE tag
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_node_check_compatible(const void *fdt, int nodeoffset,
+			      const char *compatible);
+
+/**
+ * fdt_node_offset_by_compatible - find nodes with a given 'compatible' value
+ * @fdt: pointer to the device tree blob
+ * @startoffset: only find nodes after this offset
+ * @compatible: 'compatible' string to match against
+ *
+ * fdt_node_offset_by_compatible() returns the offset of the first
+ * node after startoffset, which has a 'compatible' property which
+ * lists the given compatible string; or if startoffset is -1, the
+ * very first such node in the tree.
+ *
+ * To iterate through all nodes matching the criterion, the following
+ * idiom can be used:
+ *	offset = fdt_node_offset_by_compatible(fdt, -1, compatible);
+ *	while (offset != -FDT_ERR_NOTFOUND) {
+ *		// other code here
+ *		offset = fdt_node_offset_by_compatible(fdt, offset, compatible);
+ *	}
+ *
+ * Note the -1 in the first call to the function, if 0 is used here
+ * instead, the function will never locate the root node, even if it
+ * matches the criterion.
+ *
+ * returns:
+ *	structure block offset of the located node (>= 0, >startoffset),
+ *		 on success
+ *	-FDT_ERR_NOTFOUND, no node matching the criterion exists in the
+ *		tree after startoffset
+ *	-FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_node_offset_by_compatible(const void *fdt, int startoffset,
+				  const char *compatible);
+
+/**
+ * fdt_stringlist_contains - check a string list property for a string
+ * @strlist: Property containing a list of strings to check
+ * @listlen: Length of property
+ * @str: String to search for
+ *
+ * This is a utility function provided for convenience. The list contains
+ * one or more strings, each terminated by \0, as is found in a device tree
+ * "compatible" property.
+ *
+ * @return: 1 if the string is found in the list, 0 not found, or invalid list
+ */
+int fdt_stringlist_contains(const char *strlist, int listlen, const char *str);
+
+/**
+ * fdt_stringlist_count - count the number of strings in a string list
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of a tree node
+ * @property: name of the property containing the string list
+ * @return:
+ *   the number of strings in the given property
+ *   -FDT_ERR_BADVALUE if the property value is not NUL-terminated
+ *   -FDT_ERR_NOTFOUND if the property does not exist
+ */
+int fdt_stringlist_count(const void *fdt, int nodeoffset, const char *property);
+
+/**
+ * fdt_stringlist_search - find a string in a string list and return its index
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of a tree node
+ * @property: name of the property containing the string list
+ * @string: string to look up in the string list
+ *
+ * Note that it is possible for this function to succeed on property values
+ * that are not NUL-terminated. That's because the function will stop after
+ * finding the first occurrence of @string. This can for example happen with
+ * small-valued cell properties, such as #address-cells, when searching for
+ * the empty string.
+ *
+ * @return:
+ *   the index of the string in the list of strings
+ *   -FDT_ERR_BADVALUE if the property value is not NUL-terminated
+ *   -FDT_ERR_NOTFOUND if the property does not exist or does not contain
+ *                     the given string
+ */
+int fdt_stringlist_search(const void *fdt, int nodeoffset, const char *property,
+			  const char *string);
+
+/**
+ * fdt_stringlist_get() - obtain the string at a given index in a string list
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of a tree node
+ * @property: name of the property containing the string list
+ * @index: index of the string to return
+ * @lenp: return location for the string length or an error code on failure
+ *
+ * Note that this will successfully extract strings from properties with
+ * non-NUL-terminated values. For example on small-valued cell properties
+ * this function will return the empty string.
+ *
+ * If non-NULL, the length of the string (on success) or a negative error-code
+ * (on failure) will be stored in the integer pointer to by lenp.
+ *
+ * @return:
+ *   A pointer to the string at the given index in the string list or NULL on
+ *   failure. On success the length of the string will be stored in the memory
+ *   location pointed to by the lenp parameter, if non-NULL. On failure one of
+ *   the following negative error codes will be returned in the lenp parameter
+ *   (if non-NULL):
+ *     -FDT_ERR_BADVALUE if the property value is not NUL-terminated
+ *     -FDT_ERR_NOTFOUND if the property does not exist
+ */
+const char *fdt_stringlist_get(const void *fdt, int nodeoffset,
+			       const char *property, int index,
+			       int *lenp);
+
+/**********************************************************************/
+/* Read-only functions (addressing related)                           */
+/**********************************************************************/
+
+/**
+ * FDT_MAX_NCELLS - maximum value for #address-cells and #size-cells
+ *
+ * This is the maximum value for #address-cells, #size-cells and
+ * similar properties that will be processed by libfdt.  IEE1275
+ * requires that OF implementations handle values up to 4.
+ * Implementations may support larger values, but in practice higher
+ * values aren't used.
+ */
+#define FDT_MAX_NCELLS		4
+
+/**
+ * fdt_address_cells - retrieve address size for a bus represented in the tree
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node to find the address size for
+ *
+ * When the node has a valid #address-cells property, returns its value.
+ *
+ * returns:
+ *	0 <= n < FDT_MAX_NCELLS, on success
+ *      2, if the node has no #address-cells property
+ *      -FDT_ERR_BADNCELLS, if the node has a badly formatted or invalid
+ *		#address-cells property
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_address_cells(const void *fdt, int nodeoffset);
+
+/**
+ * fdt_size_cells - retrieve address range size for a bus represented in the
+ *                  tree
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node to find the address range size for
+ *
+ * When the node has a valid #size-cells property, returns its value.
+ *
+ * returns:
+ *	0 <= n < FDT_MAX_NCELLS, on success
+ *      2, if the node has no #size-cells property
+ *      -FDT_ERR_BADNCELLS, if the node has a badly formatted or invalid
+ *		#size-cells property
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_size_cells(const void *fdt, int nodeoffset);
+
+
+/**********************************************************************/
+/* Write-in-place functions                                           */
+/**********************************************************************/
+
+/**
+ * fdt_setprop_inplace_namelen_partial - change a property's value,
+ *                                       but not its size
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @namelen: number of characters of name to consider
+ * @idx: index of the property to change in the array
+ * @val: pointer to data to replace the property value with
+ * @len: length of the property value
+ *
+ * Identical to fdt_setprop_inplace(), but modifies the given property
+ * starting from the given index, and using only the first characters
+ * of the name. It is useful when you want to manipulate only one value of
+ * an array and you have a string that doesn't end with \0.
+ */
+#ifndef SWIG /* Not available in Python */
+int fdt_setprop_inplace_namelen_partial(void *fdt, int nodeoffset,
+					const char *name, int namelen,
+					uint32_t idx, const void *val,
+					int len);
+#endif
+
+/**
+ * fdt_setprop_inplace - change a property's value, but not its size
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: pointer to data to replace the property value with
+ * @len: length of the property value
+ *
+ * fdt_setprop_inplace() replaces the value of a given property with
+ * the data in val, of length len.  This function cannot change the
+ * size of a property, and so will only work if len is equal to the
+ * current length of the property.
+ *
+ * This function will alter only the bytes in the blob which contain
+ * the given property value, and will not alter or move any other part
+ * of the tree.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOSPACE, if len is not equal to the property's current length
+ *	-FDT_ERR_NOTFOUND, node does not have the named property
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
+#ifndef SWIG /* Not available in Python */
+int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name,
+			const void *val, int len);
+#endif
+
+/**
+ * fdt_setprop_inplace_u32 - change the value of a 32-bit integer property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: 32-bit integer value to replace the property with
+ *
+ * fdt_setprop_inplace_u32() replaces the value of a given property
+ * with the 32-bit integer value in val, converting val to big-endian
+ * if necessary.  This function cannot change the size of a property,
+ * and so will only work if the property already exists and has length
+ * 4.
+ *
+ * This function will alter only the bytes in the blob which contain
+ * the given property value, and will not alter or move any other part
+ * of the tree.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOSPACE, if the property's length is not equal to 4
+ *	-FDT_ERR_NOTFOUND, node does not have the named property
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
+static inline int fdt_setprop_inplace_u32(void *fdt, int nodeoffset,
+					  const char *name, uint32_t val)
+{
+	fdt32_t tmp = cpu_to_fdt32(val);
+	return fdt_setprop_inplace(fdt, nodeoffset, name, &tmp, sizeof(tmp));
+}
+
+/**
+ * fdt_setprop_inplace_u64 - change the value of a 64-bit integer property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: 64-bit integer value to replace the property with
+ *
+ * fdt_setprop_inplace_u64() replaces the value of a given property
+ * with the 64-bit integer value in val, converting val to big-endian
+ * if necessary.  This function cannot change the size of a property,
+ * and so will only work if the property already exists and has length
+ * 8.
+ *
+ * This function will alter only the bytes in the blob which contain
+ * the given property value, and will not alter or move any other part
+ * of the tree.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOSPACE, if the property's length is not equal to 8
+ *	-FDT_ERR_NOTFOUND, node does not have the named property
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
+static inline int fdt_setprop_inplace_u64(void *fdt, int nodeoffset,
+					  const char *name, uint64_t val)
+{
+	fdt64_t tmp = cpu_to_fdt64(val);
+	return fdt_setprop_inplace(fdt, nodeoffset, name, &tmp, sizeof(tmp));
+}
+
+/**
+ * fdt_setprop_inplace_cell - change the value of a single-cell property
+ *
+ * This is an alternative name for fdt_setprop_inplace_u32()
+ */
+static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset,
+					   const char *name, uint32_t val)
+{
+	return fdt_setprop_inplace_u32(fdt, nodeoffset, name, val);
+}
+
+/**
+ * fdt_nop_property - replace a property with nop tags
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to nop
+ * @name: name of the property to nop
+ *
+ * fdt_nop_property() will replace a given property's representation
+ * in the blob with FDT_NOP tags, effectively removing it from the
+ * tree.
+ *
+ * This function will alter only the bytes in the blob which contain
+ * the property, and will not alter or move any other part of the
+ * tree.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOTFOUND, node does not have the named property
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_nop_property(void *fdt, int nodeoffset, const char *name);
+
+/**
+ * fdt_nop_node - replace a node (subtree) with nop tags
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node to nop
+ *
+ * fdt_nop_node() will replace a given node's representation in the
+ * blob, including all its subnodes, if any, with FDT_NOP tags,
+ * effectively removing it from the tree.
+ *
+ * This function will alter only the bytes in the blob which contain
+ * the node and its properties and subnodes, and will not alter or
+ * move any other part of the tree.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_nop_node(void *fdt, int nodeoffset);
+
+/**********************************************************************/
+/* Sequential write functions                                         */
+/**********************************************************************/
+
+int fdt_create(void *buf, int bufsize);
+int fdt_resize(void *fdt, void *buf, int bufsize);
+int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size);
+int fdt_finish_reservemap(void *fdt);
+int fdt_begin_node(void *fdt, const char *name);
+int fdt_property(void *fdt, const char *name, const void *val, int len);
+static inline int fdt_property_u32(void *fdt, const char *name, uint32_t val)
+{
+	fdt32_t tmp = cpu_to_fdt32(val);
+	return fdt_property(fdt, name, &tmp, sizeof(tmp));
+}
+static inline int fdt_property_u64(void *fdt, const char *name, uint64_t val)
+{
+	fdt64_t tmp = cpu_to_fdt64(val);
+	return fdt_property(fdt, name, &tmp, sizeof(tmp));
+}
+
+#ifndef SWIG /* Not available in Python */
+static inline int fdt_property_cell(void *fdt, const char *name, uint32_t val)
+{
+	return fdt_property_u32(fdt, name, val);
+}
+#endif
+
+/**
+ * fdt_property_placeholder - add a new property and return a ptr to its value
+ *
+ * @fdt: pointer to the device tree blob
+ * @name: name of property to add
+ * @len: length of property value in bytes
+ * @valp: returns a pointer to where where the value should be placed
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_NOSPACE, standard meanings
+ */
+int fdt_property_placeholder(void *fdt, const char *name, int len, void **valp);
+
+#define fdt_property_string(fdt, name, str) \
+	fdt_property(fdt, name, str, strlen(str)+1)
+int fdt_end_node(void *fdt);
+int fdt_finish(void *fdt);
+
+/**********************************************************************/
+/* Read-write functions                                               */
+/**********************************************************************/
+
+int fdt_create_empty_tree(void *buf, int bufsize);
+int fdt_open_into(const void *fdt, void *buf, int bufsize);
+int fdt_pack(void *fdt);
+
+/**
+ * fdt_add_mem_rsv - add one memory reserve map entry
+ * @fdt: pointer to the device tree blob
+ * @address, @size: 64-bit values (native endian)
+ *
+ * Adds a reserve map entry to the given blob reserving a region at
+ * address address of length size.
+ *
+ * This function will insert data into the reserve map and will
+ * therefore change the indexes of some entries in the table.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ *		contain the new reservation entry
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size);
+
+/**
+ * fdt_del_mem_rsv - remove a memory reserve map entry
+ * @fdt: pointer to the device tree blob
+ * @n: entry to remove
+ *
+ * fdt_del_mem_rsv() removes the n-th memory reserve map entry from
+ * the blob.
+ *
+ * This function will delete data from the reservation table and will
+ * therefore change the indexes of some entries in the table.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOTFOUND, there is no entry of the given index (i.e. there
+ *		are less than n+1 reserve map entries)
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_del_mem_rsv(void *fdt, int n);
+
+/**
+ * fdt_set_name - change the name of a given node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: structure block offset of a node
+ * @name: name to give the node
+ *
+ * fdt_set_name() replaces the name (including unit address, if any)
+ * of the given node with the given string.  NOTE: this function can't
+ * efficiently check if the new name is unique amongst the given
+ * node's siblings; results are undefined if this function is invoked
+ * with a name equal to one of the given node's siblings.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob
+ *		to contain the new name
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE, standard meanings
+ */
+int fdt_set_name(void *fdt, int nodeoffset, const char *name);
+
+/**
+ * fdt_setprop - create or change a property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: pointer to data to set the property value to
+ * @len: length of the property value
+ *
+ * fdt_setprop() sets the value of the named property in the given
+ * node to the given value and length, creating the property if it
+ * does not already exist.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ *		contain the new property value
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_setprop(void *fdt, int nodeoffset, const char *name,
+		const void *val, int len);
+
+/**
+ * fdt_setprop_placeholder - allocate space for a property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @len: length of the property value
+ * @prop_data: return pointer to property data
+ *
+ * fdt_setprop_placeholer() allocates the named property in the given node.
+ * If the property exists it is resized. In either case a pointer to the
+ * property data is returned.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ *		contain the new property value
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_setprop_placeholder(void *fdt, int nodeoffset, const char *name,
+			    int len, void **prop_data);
+
+/**
+ * fdt_setprop_u32 - set a property to a 32-bit integer
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: 32-bit integer value for the property (native endian)
+ *
+ * fdt_setprop_u32() sets the value of the named property in the given
+ * node to the given 32-bit integer value (converting to big-endian if
+ * necessary), or creates a new property with that value if it does
+ * not already exist.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ *		contain the new property value
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
+static inline int fdt_setprop_u32(void *fdt, int nodeoffset, const char *name,
+				  uint32_t val)
+{
+	fdt32_t tmp = cpu_to_fdt32(val);
+	return fdt_setprop(fdt, nodeoffset, name, &tmp, sizeof(tmp));
+}
+
+/**
+ * fdt_setprop_u64 - set a property to a 64-bit integer
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: 64-bit integer value for the property (native endian)
+ *
+ * fdt_setprop_u64() sets the value of the named property in the given
+ * node to the given 64-bit integer value (converting to big-endian if
+ * necessary), or creates a new property with that value if it does
+ * not already exist.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ *		contain the new property value
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
+static inline int fdt_setprop_u64(void *fdt, int nodeoffset, const char *name,
+				  uint64_t val)
+{
+	fdt64_t tmp = cpu_to_fdt64(val);
+	return fdt_setprop(fdt, nodeoffset, name, &tmp, sizeof(tmp));
+}
+
+/**
+ * fdt_setprop_cell - set a property to a single cell value
+ *
+ * This is an alternative name for fdt_setprop_u32()
+ */
+static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name,
+				   uint32_t val)
+{
+	return fdt_setprop_u32(fdt, nodeoffset, name, val);
+}
+
+/**
+ * fdt_setprop_string - set a property to a string value
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @str: string value for the property
+ *
+ * fdt_setprop_string() sets the value of the named property in the
+ * given node to the given string value (using the length of the
+ * string to determine the new length of the property), or creates a
+ * new property with that value if it does not already exist.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ *		contain the new property value
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
+#define fdt_setprop_string(fdt, nodeoffset, name, str) \
+	fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1)
+
+
+/**
+ * fdt_setprop_empty - set a property to an empty value
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ *
+ * fdt_setprop_empty() sets the value of the named property in the
+ * given node to an empty (zero length) value, or creates a new empty
+ * property if it does not already exist.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ *		contain the new property value
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
+#define fdt_setprop_empty(fdt, nodeoffset, name) \
+	fdt_setprop((fdt), (nodeoffset), (name), NULL, 0)
+
+/**
+ * fdt_appendprop - append to or create a property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to append to
+ * @val: pointer to data to append to the property value
+ * @len: length of the data to append to the property value
+ *
+ * fdt_appendprop() appends the value to the named property in the
+ * given node, creating the property if it does not already exist.
+ *
+ * This function may insert data into the blob, and will therefore
+ * change the offsets of some existing nodes.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ *		contain the new property value
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_appendprop(void *fdt, int nodeoffset, const char *name,
+		   const void *val, int len);
+
+/**
+ * fdt_appendprop_u32 - append a 32-bit integer value to a property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: 32-bit integer value to append to the property (native endian)
+ *
+ * fdt_appendprop_u32() appends the given 32-bit integer value
+ * (converting to big-endian if necessary) to the value of the named
+ * property in the given node, or creates a new property with that
+ * value if it does not already exist.
+ *
+ * This function may insert data into the blob, and will therefore
+ * change the offsets of some existing nodes.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ *		contain the new property value
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
+static inline int fdt_appendprop_u32(void *fdt, int nodeoffset,
+				     const char *name, uint32_t val)
+{
+	fdt32_t tmp = cpu_to_fdt32(val);
+	return fdt_appendprop(fdt, nodeoffset, name, &tmp, sizeof(tmp));
+}
+
+/**
+ * fdt_appendprop_u64 - append a 64-bit integer value to a property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: 64-bit integer value to append to the property (native endian)
+ *
+ * fdt_appendprop_u64() appends the given 64-bit integer value
+ * (converting to big-endian if necessary) to the value of the named
+ * property in the given node, or creates a new property with that
+ * value if it does not already exist.
+ *
+ * This function may insert data into the blob, and will therefore
+ * change the offsets of some existing nodes.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ *		contain the new property value
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
+static inline int fdt_appendprop_u64(void *fdt, int nodeoffset,
+				     const char *name, uint64_t val)
+{
+	fdt64_t tmp = cpu_to_fdt64(val);
+	return fdt_appendprop(fdt, nodeoffset, name, &tmp, sizeof(tmp));
+}
+
+/**
+ * fdt_appendprop_cell - append a single cell value to a property
+ *
+ * This is an alternative name for fdt_appendprop_u32()
+ */
+static inline int fdt_appendprop_cell(void *fdt, int nodeoffset,
+				      const char *name, uint32_t val)
+{
+	return fdt_appendprop_u32(fdt, nodeoffset, name, val);
+}
+
+/**
+ * fdt_appendprop_string - append a string to a property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @str: string value to append to the property
+ *
+ * fdt_appendprop_string() appends the given string to the value of
+ * the named property in the given node, or creates a new property
+ * with that value if it does not already exist.
+ *
+ * This function may insert data into the blob, and will therefore
+ * change the offsets of some existing nodes.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ *		contain the new property value
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
+#define fdt_appendprop_string(fdt, nodeoffset, name, str) \
+	fdt_appendprop((fdt), (nodeoffset), (name), (str), strlen(str)+1)
+
+/**
+ * fdt_delprop - delete a property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to nop
+ * @name: name of the property to nop
+ *
+ * fdt_del_property() will delete the given property.
+ *
+ * This function will delete data from the blob, and will therefore
+ * change the offsets of some existing nodes.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOTFOUND, node does not have the named property
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_delprop(void *fdt, int nodeoffset, const char *name);
+
+/**
+ * fdt_add_subnode_namelen - creates a new node based on substring
+ * @fdt: pointer to the device tree blob
+ * @parentoffset: structure block offset of a node
+ * @name: name of the subnode to locate
+ * @namelen: number of characters of name to consider
+ *
+ * Identical to fdt_add_subnode(), but use only the first namelen
+ * characters of name as the name of the new node.  This is useful for
+ * creating subnodes based on a portion of a larger string, such as a
+ * full path.
+ */
+#ifndef SWIG /* Not available in Python */
+int fdt_add_subnode_namelen(void *fdt, int parentoffset,
+			    const char *name, int namelen);
+#endif
+
+/**
+ * fdt_add_subnode - creates a new node
+ * @fdt: pointer to the device tree blob
+ * @parentoffset: structure block offset of a node
+ * @name: name of the subnode to locate
+ *
+ * fdt_add_subnode() creates a new node as a subnode of the node at
+ * structure block offset parentoffset, with the given name (which
+ * should include the unit address, if any).
+ *
+ * This function will insert data into the blob, and will therefore
+ * change the offsets of some existing nodes.
+
+ * returns:
+ *	structure block offset of the created nodeequested subnode (>=0), on
+ *		success
+ *	-FDT_ERR_NOTFOUND, if the requested subnode does not exist
+ *	-FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE
+ *		tag
+ *	-FDT_ERR_EXISTS, if the node at parentoffset already has a subnode of
+ *		the given name
+ *	-FDT_ERR_NOSPACE, if there is insufficient free space in the
+ *		blob to contain the new node
+ *	-FDT_ERR_NOSPACE
+ *	-FDT_ERR_BADLAYOUT
+ *      -FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_TRUNCATED, standard meanings.
+ */
+int fdt_add_subnode(void *fdt, int parentoffset, const char *name);
+
+/**
+ * fdt_del_node - delete a node (subtree)
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node to nop
+ *
+ * fdt_del_node() will remove the given node, including all its
+ * subnodes if any, from the blob.
+ *
+ * This function will delete data from the blob, and will therefore
+ * change the offsets of some existing nodes.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_del_node(void *fdt, int nodeoffset);
+
+/**
+ * fdt_overlay_apply - Applies a DT overlay on a base DT
+ * @fdt: pointer to the base device tree blob
+ * @fdto: pointer to the device tree overlay blob
+ *
+ * fdt_overlay_apply() will apply the given device tree overlay on the
+ * given base device tree.
+ *
+ * Expect the base device tree to be modified, even if the function
+ * returns an error.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOSPACE, there's not enough space in the base device tree
+ *	-FDT_ERR_NOTFOUND, the overlay points to some inexistant nodes or
+ *		properties in the base DT
+ *	-FDT_ERR_BADPHANDLE,
+ *	-FDT_ERR_BADOVERLAY,
+ *	-FDT_ERR_NOPHANDLES,
+ *	-FDT_ERR_INTERNAL,
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADOFFSET,
+ *	-FDT_ERR_BADPATH,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_overlay_apply(void *fdt, void *fdto);
+
+/**********************************************************************/
+/* Debugging / informational functions                                */
+/**********************************************************************/
+
+const char *fdt_strerror(int errval);
+
+#endif /* LIBFDT_H */