| /* |
| * Copyright (c) 2023-2024, STMicroelectronics - All Rights Reserved |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #ifndef STM32MP2_DEF_H |
| #define STM32MP2_DEF_H |
| |
| #include <common/tbbr/tbbr_img_def.h> |
| #ifndef __ASSEMBLER__ |
| #include <drivers/st/bsec.h> |
| #endif |
| #include <drivers/st/stm32mp25_rcc.h> |
| #ifndef __ASSEMBLER__ |
| #include <drivers/st/stm32mp2_clk.h> |
| #endif |
| #include <drivers/st/stm32mp2_pwr.h> |
| #include <dt-bindings/clock/stm32mp25-clks.h> |
| #include <dt-bindings/clock/stm32mp25-clksrc.h> |
| #include <dt-bindings/gpio/stm32-gpio.h> |
| #include <dt-bindings/reset/stm32mp25-resets.h> |
| |
| #ifndef __ASSEMBLER__ |
| #include <boot_api.h> |
| #include <stm32mp2_private.h> |
| #include <stm32mp_common.h> |
| #include <stm32mp_dt.h> |
| #include <stm32mp_shared_resources.h> |
| #endif |
| |
| /******************************************************************************* |
| * CHIP ID |
| ******************************************************************************/ |
| #define STM32MP2_CHIP_ID U(0x505) |
| |
| #define STM32MP251A_PART_NB U(0x400B3E6D) |
| #define STM32MP251C_PART_NB U(0x000B306D) |
| #define STM32MP251D_PART_NB U(0xC00B3E6D) |
| #define STM32MP251F_PART_NB U(0x800B306D) |
| #define STM32MP253A_PART_NB U(0x400B3E0C) |
| #define STM32MP253C_PART_NB U(0x000B300C) |
| #define STM32MP253D_PART_NB U(0xC00B3E0C) |
| #define STM32MP253F_PART_NB U(0x800B300C) |
| #define STM32MP255A_PART_NB U(0x40082E00) |
| #define STM32MP255C_PART_NB U(0x00082000) |
| #define STM32MP255D_PART_NB U(0xC0082E00) |
| #define STM32MP255F_PART_NB U(0x80082000) |
| #define STM32MP257A_PART_NB U(0x40002E00) |
| #define STM32MP257C_PART_NB U(0x00002000) |
| #define STM32MP257D_PART_NB U(0xC0002E00) |
| #define STM32MP257F_PART_NB U(0x80002000) |
| |
| #define STM32MP2_REV_A U(0x08) |
| #define STM32MP2_REV_B U(0x10) |
| #define STM32MP2_REV_X U(0x12) |
| #define STM32MP2_REV_Y U(0x11) |
| #define STM32MP2_REV_Z U(0x09) |
| |
| /******************************************************************************* |
| * PACKAGE ID |
| ******************************************************************************/ |
| #define STM32MP25_PKG_CUSTOM U(0) |
| #define STM32MP25_PKG_AL_VFBGA361 U(1) |
| #define STM32MP25_PKG_AK_VFBGA424 U(3) |
| #define STM32MP25_PKG_AI_TFBGA436 U(5) |
| #define STM32MP25_PKG_UNKNOWN U(7) |
| |
| /******************************************************************************* |
| * STM32MP2 memory map related constants |
| ******************************************************************************/ |
| #define STM32MP_SYSRAM_BASE U(0x0E000000) |
| #define STM32MP_SYSRAM_SIZE U(0x00040000) |
| #define SRAM1_BASE U(0x0E040000) |
| #define SRAM1_SIZE_FOR_TFA U(0x00010000) |
| #define STM32MP_SEC_SYSRAM_SIZE STM32MP_SYSRAM_SIZE |
| |
| /* DDR configuration */ |
| #define STM32MP_DDR_BASE U(0x80000000) |
| #define STM32MP_DDR_MAX_SIZE UL(0x100000000) /* Max 4GB */ |
| |
| /* DDR power initializations */ |
| #ifndef __ASSEMBLER__ |
| enum ddr_type { |
| STM32MP_DDR3, |
| STM32MP_DDR4, |
| STM32MP_LPDDR4 |
| }; |
| #endif |
| |
| /* Section used inside TF binaries */ |
| #define STM32MP_PARAM_LOAD_SIZE U(0x00002400) /* 9 KB for param */ |
| /* 512 Bytes reserved for header */ |
| #define STM32MP_HEADER_SIZE U(0x00000200) |
| #define STM32MP_HEADER_BASE (STM32MP_SYSRAM_BASE + \ |
| STM32MP_PARAM_LOAD_SIZE) |
| |
| /* round_up(STM32MP_PARAM_LOAD_SIZE + STM32MP_HEADER_SIZE, PAGE_SIZE) */ |
| #define STM32MP_HEADER_RESERVED_SIZE U(0x3000) |
| |
| #define STM32MP_BINARY_BASE (STM32MP_SYSRAM_BASE + \ |
| STM32MP_PARAM_LOAD_SIZE + \ |
| STM32MP_HEADER_SIZE) |
| |
| #define STM32MP_BINARY_SIZE (STM32MP_SYSRAM_SIZE - \ |
| (STM32MP_PARAM_LOAD_SIZE + \ |
| STM32MP_HEADER_SIZE)) |
| |
| #define STM32MP_BL2_RO_SIZE U(0x00020000) /* 128 KB */ |
| #define STM32MP_BL2_SIZE U(0x00029000) /* 164 KB for BL2 */ |
| |
| /* Allocate remaining sysram to BL31 */ |
| #define STM32MP_BL31_SIZE (STM32MP_SEC_SYSRAM_SIZE - \ |
| STM32MP_BL2_SIZE) |
| |
| #define STM32MP_BL2_BASE (STM32MP_SYSRAM_BASE + \ |
| STM32MP_SYSRAM_SIZE - \ |
| STM32MP_BL2_SIZE) |
| |
| #define STM32MP_BL2_RO_BASE STM32MP_BL2_BASE |
| |
| #define STM32MP_BL2_RW_BASE (STM32MP_BL2_RO_BASE + \ |
| STM32MP_BL2_RO_SIZE) |
| |
| #define STM32MP_BL2_RW_SIZE (STM32MP_SYSRAM_BASE + \ |
| STM32MP_SYSRAM_SIZE - \ |
| STM32MP_BL2_RW_BASE) |
| |
| /* BL2 and BL32/sp_min require 4 tables */ |
| #define MAX_XLAT_TABLES U(4) /* 16 KB for mapping */ |
| |
| /* |
| * MAX_MMAP_REGIONS is usually: |
| * BL stm32mp2_mmap size + mmap regions in *_plat_arch_setup |
| */ |
| #define MAX_MMAP_REGIONS 6 |
| |
| /* DTB initialization value */ |
| #define STM32MP_BL2_DTB_SIZE U(0x00006000) /* 24 KB for DTB */ |
| |
| #define STM32MP_BL2_DTB_BASE (STM32MP_BL2_BASE - \ |
| STM32MP_BL2_DTB_SIZE) |
| |
| #if defined(IMAGE_BL2) |
| #define STM32MP_DTB_SIZE STM32MP_BL2_DTB_SIZE |
| #define STM32MP_DTB_BASE STM32MP_BL2_DTB_BASE |
| #endif |
| |
| #if STM32MP_DDR_FIP_IO_STORAGE |
| #define STM32MP_DDR_FW_BASE SRAM1_BASE |
| #define STM32MP_DDR_FW_MAX_SIZE U(0x8800) |
| #endif |
| |
| #define STM32MP_FW_CONFIG_MAX_SIZE PAGE_SIZE |
| #define STM32MP_FW_CONFIG_BASE STM32MP_SYSRAM_BASE |
| |
| #define STM32MP_BL33_BASE (STM32MP_DDR_BASE + U(0x04000000)) |
| #define STM32MP_BL33_MAX_SIZE U(0x400000) |
| #define STM32MP_HW_CONFIG_BASE (STM32MP_BL33_BASE + \ |
| STM32MP_BL33_MAX_SIZE) |
| #define STM32MP_HW_CONFIG_MAX_SIZE U(0x40000) |
| |
| /******************************************************************************* |
| * STM32MP2 device/io map related constants (used for MMU) |
| ******************************************************************************/ |
| #define STM32MP_DEVICE_BASE U(0x40000000) |
| #define STM32MP_DEVICE_SIZE U(0x40000000) |
| |
| /******************************************************************************* |
| * STM32MP2 RCC |
| ******************************************************************************/ |
| #define RCC_BASE U(0x44200000) |
| |
| /******************************************************************************* |
| * STM32MP2 PWR |
| ******************************************************************************/ |
| #define PWR_BASE U(0x44210000) |
| |
| /******************************************************************************* |
| * STM32MP2 GPIO |
| ******************************************************************************/ |
| #define GPIOA_BASE U(0x44240000) |
| #define GPIOB_BASE U(0x44250000) |
| #define GPIOC_BASE U(0x44260000) |
| #define GPIOD_BASE U(0x44270000) |
| #define GPIOE_BASE U(0x44280000) |
| #define GPIOF_BASE U(0x44290000) |
| #define GPIOG_BASE U(0x442A0000) |
| #define GPIOH_BASE U(0x442B0000) |
| #define GPIOI_BASE U(0x442C0000) |
| #define GPIOJ_BASE U(0x442D0000) |
| #define GPIOK_BASE U(0x442E0000) |
| #define GPIOZ_BASE U(0x46200000) |
| #define GPIO_BANK_OFFSET U(0x10000) |
| |
| #define STM32MP_GPIOS_PIN_MAX_COUNT 16 |
| #define STM32MP_GPIOZ_PIN_MAX_COUNT 8 |
| |
| /******************************************************************************* |
| * STM32MP2 UART |
| ******************************************************************************/ |
| #define USART1_BASE U(0x40330000) |
| #define USART2_BASE U(0x400E0000) |
| #define USART3_BASE U(0x400F0000) |
| #define UART4_BASE U(0x40100000) |
| #define UART5_BASE U(0x40110000) |
| #define USART6_BASE U(0x40220000) |
| #define UART7_BASE U(0x40370000) |
| #define UART8_BASE U(0x40380000) |
| #define UART9_BASE U(0x402C0000) |
| #define STM32MP_NB_OF_UART U(9) |
| |
| /* For UART crash console */ |
| #define STM32MP_DEBUG_USART_CLK_FRQ 64000000 |
| /* USART2 on HSI@64MHz, TX on GPIOA4 Alternate 6 */ |
| #define STM32MP_DEBUG_USART_BASE USART2_BASE |
| #define DEBUG_UART_TX_GPIO_BANK_ADDRESS GPIOA_BASE |
| #define DEBUG_UART_TX_GPIO_BANK_CLK_REG RCC_GPIOACFGR |
| #define DEBUG_UART_TX_GPIO_BANK_CLK_EN RCC_GPIOxCFGR_GPIOxEN |
| #define DEBUG_UART_TX_GPIO_PORT 4 |
| #define DEBUG_UART_TX_GPIO_ALTERNATE 6 |
| #define DEBUG_UART_TX_CLKSRC_REG RCC_XBAR8CFGR |
| #define DEBUG_UART_TX_CLKSRC XBAR_SRC_HSI |
| #define DEBUG_UART_TX_EN_REG RCC_USART2CFGR |
| #define DEBUG_UART_TX_EN RCC_UARTxCFGR_UARTxEN |
| #define DEBUG_UART_RST_REG RCC_USART2CFGR |
| #define DEBUG_UART_RST_BIT RCC_UARTxCFGR_UARTxRST |
| #define DEBUG_UART_PREDIV_CFGR RCC_PREDIV8CFGR |
| #define DEBUG_UART_FINDIV_CFGR RCC_FINDIV8CFGR |
| |
| /******************************************************************************* |
| * STM32MP2 SDMMC |
| ******************************************************************************/ |
| #define STM32MP_SDMMC1_BASE U(0x48220000) |
| #define STM32MP_SDMMC2_BASE U(0x48230000) |
| #define STM32MP_SDMMC3_BASE U(0x48240000) |
| |
| /******************************************************************************* |
| * STM32MP2 BSEC / OTP |
| ******************************************************************************/ |
| /* |
| * 367 available OTPs, the other are masked |
| * - ECIES key: 368 to 375 (only readable by bootrom) |
| * - HWKEY: 376 to 383 (never reloadable or readable) |
| */ |
| #define STM32MP2_OTP_MAX_ID U(0x16F) |
| #define STM32MP2_MID_OTP_START U(0x80) |
| #define STM32MP2_UPPER_OTP_START U(0x100) |
| |
| /* OTP labels */ |
| #define PART_NUMBER_OTP "part-number-otp" |
| #define REVISION_OTP "rev_otp" |
| #define PACKAGE_OTP "package-otp" |
| #define HCONF1_OTP "otp124" |
| #define NAND_OTP "otp16" |
| #define NAND2_OTP "otp20" |
| #define BOARD_ID_OTP "board-id" |
| #define UID_OTP "uid-otp" |
| #define LIFECYCLE2_OTP "otp18" |
| #define PKH_OTP "otp144" |
| #define ENCKEY_OTP "otp260" |
| |
| /* OTP mask */ |
| /* PACKAGE */ |
| #define PACKAGE_OTP_PKG_MASK GENMASK_32(2, 0) |
| #define PACKAGE_OTP_PKG_SHIFT U(0) |
| |
| /* IWDG OTP */ |
| #define HCONF1_OTP_IWDG_HW_POS U(0) |
| #define HCONF1_OTP_IWDG_FZ_STOP_POS U(1) |
| #define HCONF1_OTP_IWDG_FZ_STANDBY_POS U(2) |
| |
| /* NAND OTP */ |
| /* NAND parameter storage flag */ |
| #define NAND_PARAM_STORED_IN_OTP BIT_32(31) |
| |
| /* NAND page size in bytes */ |
| #define NAND_PAGE_SIZE_MASK GENMASK_32(30, 29) |
| #define NAND_PAGE_SIZE_SHIFT U(29) |
| #define NAND_PAGE_SIZE_2K U(0) |
| #define NAND_PAGE_SIZE_4K U(1) |
| #define NAND_PAGE_SIZE_8K U(2) |
| |
| /* NAND block size in pages */ |
| #define NAND_BLOCK_SIZE_MASK GENMASK_32(28, 27) |
| #define NAND_BLOCK_SIZE_SHIFT U(27) |
| #define NAND_BLOCK_SIZE_64_PAGES U(0) |
| #define NAND_BLOCK_SIZE_128_PAGES U(1) |
| #define NAND_BLOCK_SIZE_256_PAGES U(2) |
| |
| /* NAND number of block (in unit of 256 blocks) */ |
| #define NAND_BLOCK_NB_MASK GENMASK_32(26, 19) |
| #define NAND_BLOCK_NB_SHIFT U(19) |
| #define NAND_BLOCK_NB_UNIT U(256) |
| |
| /* NAND bus width in bits */ |
| #define NAND_WIDTH_MASK BIT_32(18) |
| #define NAND_WIDTH_SHIFT U(18) |
| |
| /* NAND number of ECC bits per 512 bytes */ |
| #define NAND_ECC_BIT_NB_MASK GENMASK_32(17, 15) |
| #define NAND_ECC_BIT_NB_SHIFT U(15) |
| #define NAND_ECC_BIT_NB_UNSET U(0) |
| #define NAND_ECC_BIT_NB_1_BITS U(1) |
| #define NAND_ECC_BIT_NB_4_BITS U(2) |
| #define NAND_ECC_BIT_NB_8_BITS U(3) |
| #define NAND_ECC_ON_DIE U(4) |
| |
| /* NAND number of planes */ |
| #define NAND_PLANE_BIT_NB_MASK BIT_32(14) |
| |
| /* NAND2 OTP */ |
| #define NAND2_PAGE_SIZE_SHIFT U(16) |
| |
| /* NAND2 config distribution */ |
| #define NAND2_CONFIG_DISTRIB BIT_32(0) |
| #define NAND2_PNAND_NAND2_SNAND_NAND1 U(0) |
| #define NAND2_PNAND_NAND1_SNAND_NAND2 U(1) |
| |
| /* MONOTONIC OTP */ |
| #define MAX_MONOTONIC_VALUE U(32) |
| |
| /* UID OTP */ |
| #define UID_WORD_NB U(3) |
| |
| /* Lifecycle OTP */ |
| #define SECURE_BOOT_CLOSED_SECURE GENMASK_32(3, 0) |
| |
| /******************************************************************************* |
| * STM32MP2 TAMP |
| ******************************************************************************/ |
| #define PLAT_MAX_TAMP_INT U(5) |
| #define PLAT_MAX_TAMP_EXT U(3) |
| #define TAMP_BASE U(0x46010000) |
| #define TAMP_SMCR (TAMP_BASE + U(0x20)) |
| #define TAMP_BKP_REGISTER_BASE (TAMP_BASE + U(0x100)) |
| #define TAMP_BKP_REG_CLK CK_BUS_RTC |
| #define TAMP_BKP_SEC_NUMBER U(10) |
| #define TAMP_COUNTR U(0x40) |
| |
| #if !(defined(__LINKER__) || defined(__ASSEMBLER__)) |
| static inline uintptr_t tamp_bkpr(uint32_t idx) |
| { |
| return TAMP_BKP_REGISTER_BASE + (idx << 2); |
| } |
| #endif |
| |
| /******************************************************************************* |
| * STM32MP2 DDRCTRL |
| ******************************************************************************/ |
| #define DDRCTRL_BASE U(0x48040000) |
| |
| /******************************************************************************* |
| * STM32MP2 DDRDBG |
| ******************************************************************************/ |
| #define DDRDBG_BASE U(0x48050000) |
| |
| /******************************************************************************* |
| * STM32MP2 DDRPHYC |
| ******************************************************************************/ |
| #define DDRPHYC_BASE U(0x48C00000) |
| |
| /******************************************************************************* |
| * Miscellaneous STM32MP1 peripherals base address |
| ******************************************************************************/ |
| #define BSEC_BASE U(0x44000000) |
| #define DBGMCU_BASE U(0x4A010000) |
| #define HASH_BASE U(0x42010000) |
| #define RTC_BASE U(0x46000000) |
| #define STGEN_BASE U(0x48080000) |
| #define SYSCFG_BASE U(0x44230000) |
| |
| /******************************************************************************* |
| * STM32MP RIF |
| ******************************************************************************/ |
| #define RISAB3_BASE U(0x42110000) |
| |
| /******************************************************************************* |
| * STM32MP CA35SSC |
| ******************************************************************************/ |
| #define A35SSC_BASE U(0x48800000) |
| |
| /******************************************************************************* |
| * REGULATORS |
| ******************************************************************************/ |
| /* 3 PWR + 1 VREFBUF + 14 PMIC regulators + 1 FIXED */ |
| #define PLAT_NB_RDEVS U(19) |
| /* 2 FIXED */ |
| #define PLAT_NB_FIXED_REGUS U(2) |
| /* No GPIO regu */ |
| #define PLAT_NB_GPIO_REGUS U(0) |
| |
| /******************************************************************************* |
| * Device Tree defines |
| ******************************************************************************/ |
| #define DT_BSEC_COMPAT "st,stm32mp25-bsec" |
| #define DT_DDR_COMPAT "st,stm32mp2-ddr" |
| #define DT_PWR_COMPAT "st,stm32mp25-pwr" |
| #define DT_RCC_CLK_COMPAT "st,stm32mp25-rcc" |
| #define DT_SDMMC2_COMPAT "st,stm32mp25-sdmmc2" |
| #define DT_UART_COMPAT "st,stm32h7-uart" |
| |
| #endif /* STM32MP2_DEF_H */ |