diff --git a/drivers/marvell/comphy/phy-comphy-cp110.c b/drivers/marvell/comphy/phy-comphy-cp110.c
index 51d3c4c..c8ba9b8 100644
--- a/drivers/marvell/comphy/phy-comphy-cp110.c
+++ b/drivers/marvell/comphy/phy-comphy-cp110.c
@@ -61,6 +61,11 @@
 					SAR_RST_PCIE1_CLOCK_CONFIG_CP1_OFFSET)
 #define SAR_STATUS_0_REG			200
 #define DFX_FROM_COMPHY_ADDR(x)			((x & ~0xffffff) + DFX_BASE)
+/* Common Phy training  */
+#define COMPHY_TRX_TRAIN_COMPHY_OFFS		0x1000
+#define COMPHY_TRX_TRAIN_RX_TRAIN_ENABLE	0x1
+#define COMPHY_TRX_RELATIVE_ADDR(comphy_index)	(comphy_train_base + \
+			(comphy_index) * COMPHY_TRX_TRAIN_COMPHY_OFFS)
 
 /* The same Units Soft Reset Config register are accessed in all PCIe ports
  * initialization, so a spin lock is defined in case when more than 1 CPUs
@@ -829,7 +834,8 @@
 
 static int mvebu_cp110_comphy_xfi_power_on(uint64_t comphy_base,
 					   uint8_t comphy_index,
-					   uint32_t comphy_mode)
+					   uint32_t comphy_mode,
+					   uint64_t comphy_train_base)
 {
 	uintptr_t hpipe_addr, sd_ip_addr, comphy_addr, addr;
 	uint32_t mask, data, speed = COMPHY_GET_SPEED(comphy_mode);
@@ -837,7 +843,6 @@
 	uint8_t ap_nr, cp_nr;
 
 	debug_enter();
-
 	mvebu_cp110_get_ap_and_cp_nr(&ap_nr, &cp_nr, comphy_base);
 
 	if (rx_trainng_done[ap_nr][cp_nr][comphy_index]) {
@@ -1234,6 +1239,14 @@
 	data |= 0x1 << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET;
 	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
 
+	/* Force rx training on 10G port */
+	data = mmio_read_32(COMPHY_TRX_RELATIVE_ADDR(comphy_index));
+	data |= COMPHY_TRX_TRAIN_RX_TRAIN_ENABLE;
+	mmio_write_32(COMPHY_TRX_RELATIVE_ADDR(comphy_index), data);
+	mdelay(200);
+	data &= ~COMPHY_TRX_TRAIN_RX_TRAIN_ENABLE;
+	mmio_write_32(COMPHY_TRX_RELATIVE_ADDR(comphy_index), data);
+
 	debug_exit();
 
 	return ret;
@@ -2348,8 +2361,10 @@
 	return 0;
 }
 
-int mvebu_cp110_comphy_power_on(uint64_t comphy_base, uint8_t comphy_index,
-				uint64_t comphy_mode)
+int mvebu_cp110_comphy_power_on(uint64_t comphy_base,
+				uint8_t comphy_index,
+				uint64_t comphy_mode,
+				uint64_t comphy_train_base)
 {
 	int mode = COMPHY_GET_MODE(comphy_mode);
 	int err = 0;
@@ -2373,7 +2388,8 @@
 	case (COMPHY_SFI_MODE):
 		err = mvebu_cp110_comphy_xfi_power_on(comphy_base,
 						      comphy_index,
-						      comphy_mode);
+						      comphy_mode,
+						      comphy_train_base);
 		break;
 	case (COMPHY_PCIE_MODE):
 		err = mvebu_cp110_comphy_pcie_power_on(comphy_base,
diff --git a/drivers/marvell/comphy/phy-comphy-cp110.h b/drivers/marvell/comphy/phy-comphy-cp110.h
index b4a2102..0be6c26 100644
--- a/drivers/marvell/comphy/phy-comphy-cp110.h
+++ b/drivers/marvell/comphy/phy-comphy-cp110.h
@@ -89,8 +89,9 @@
 				     uint8_t comphy_index);
 int mvebu_cp110_comphy_power_off(uint64_t comphy_base,
 				 uint8_t comphy_index, uint64_t comphy_mode);
-int mvebu_cp110_comphy_power_on(uint64_t comphy_base,
-				uint8_t comphy_index, uint64_t comphy_mode);
+int mvebu_cp110_comphy_power_on(uint64_t comphy_base, uint8_t comphy_index,
+				uint64_t comphy_mode,
+				uint64_t comphy_train_base);
 int mvebu_cp110_comphy_xfi_rx_training(uint64_t comphy_base,
 				       uint8_t comphy_index);
 int mvebu_cp110_comphy_digital_reset(uint64_t comphy_base, uint8_t comphy_index,
diff --git a/plat/marvell/armada/common/mrvl_sip_svc.c b/plat/marvell/armada/common/mrvl_sip_svc.c
index 48172b2..4e17390 100644
--- a/plat/marvell/armada/common/mrvl_sip_svc.c
+++ b/plat/marvell/armada/common/mrvl_sip_svc.c
@@ -50,6 +50,9 @@
 #define MVEBU_COMPHY_OFFSET	0x441000
 #define MVEBU_CP_BASE_MASK	(~0xffffff)
 
+/* Common PHY register */
+#define COMPHY_TRX_TRAIN_CTRL_REG_0_OFFS	0x120a2c
+
 /* This macro is used to identify COMPHY related calls from SMC function ID */
 #define is_comphy_fid(fid)	\
 	((fid) >= MV_SIP_COMPHY_POWER_ON && (fid) <= MV_SIP_COMPHY_DIG_RESET)
@@ -76,7 +79,7 @@
 			       void *handle,
 			       u_register_t flags)
 {
-	u_register_t ret, read;
+	u_register_t ret, read, x5 = x1;
 	uint32_t w2[2] = {0, 0};
 	int i;
 
@@ -91,6 +94,7 @@
 			SMC_RET1(handle, SMC_UNK);
 		}
 
+		x5 = x1 + COMPHY_TRX_TRAIN_CTRL_REG_0_OFFS;
 		x1 += MVEBU_COMPHY_OFFSET;
 
 		if (x2 >= MAX_LANE_NR) {
@@ -105,7 +109,7 @@
 	/* Comphy related FID's */
 	case MV_SIP_COMPHY_POWER_ON:
 		/* x1:  comphy_base, x2: comphy_index, x3: comphy_mode */
-		ret = mvebu_cp110_comphy_power_on(x1, x2, x3);
+		ret = mvebu_cp110_comphy_power_on(x1, x2, x3, x5);
 		SMC_RET1(handle, ret);
 	case MV_SIP_COMPHY_POWER_OFF:
 		/* x1:  comphy_base, x2: comphy_index */