plat/arm: allow RESET_TO_BL31 for CSS-based platforms
This lets any future CSS platforms to use RESET_TO_BL31 flag.
Change-Id: I32a90fce43cb0c6f4d33589653a0fd6a7ecc9577
Signed-off-by: Deepak Pandey <Deepak.Pandey@arm.com>
diff --git a/plat/arm/board/juno/platform.mk b/plat/arm/board/juno/platform.mk
index 90fa938..e6c44bb 100644
--- a/plat/arm/board/juno/platform.mk
+++ b/plat/arm/board/juno/platform.mk
@@ -90,6 +90,11 @@
endif
+ifneq (${RESET_TO_BL31},0)
+ $(error "Using BL31 as the reset vector is not supported on ${PLATFORM} platform. \
+ Please set RESET_TO_BL31 to 0.")
+endif
+
# Errata workarounds for Cortex-A53:
ERRATA_A53_826319 := 1
ERRATA_A53_835769 := 1
diff --git a/plat/arm/css/common/css_common.mk b/plat/arm/css/common/css_common.mk
index 984c1da..ca1edab 100644
--- a/plat/arm/css/common/css_common.mk
+++ b/plat/arm/css/common/css_common.mk
@@ -39,11 +39,6 @@
plat/arm/css/drivers/mhu/css_mhu_doorbell.c
endif
-ifneq (${RESET_TO_BL31},0)
- $(error "Using BL31 as the reset vector is not supported on CSS platforms. \
- Please set RESET_TO_BL31 to 0.")
-endif
-
# Process CSS_LOAD_SCP_IMAGES flag
$(eval $(call assert_boolean,CSS_LOAD_SCP_IMAGES))
$(eval $(call add_define,CSS_LOAD_SCP_IMAGES))
diff --git a/plat/arm/css/sgi/sgi-common.mk b/plat/arm/css/sgi/sgi-common.mk
index 28f97b1..24f03dd 100644
--- a/plat/arm/css/sgi/sgi-common.mk
+++ b/plat/arm/css/sgi/sgi-common.mk
@@ -67,6 +67,11 @@
# Add the HW_CONFIG to FIP and specify the same to certtool
$(eval $(call TOOL_ADD_PAYLOAD,${HW_CONFIG},--hw-config))
+ifneq (${RESET_TO_BL31},0)
+ $(error "Using BL31 as the reset vector is not supported on ${PLATFORM} platform. \
+ Please set RESET_TO_BL31 to 0.")
+endif
+
$(eval $(call add_define,SGI_PLAT))
override CSS_LOAD_SCP_IMAGES := 0
diff --git a/plat/arm/css/sgm/sgm-common.mk b/plat/arm/css/sgm/sgm-common.mk
index b10e14c..3eb4840 100644
--- a/plat/arm/css/sgm/sgm-common.mk
+++ b/plat/arm/css/sgm/sgm-common.mk
@@ -45,6 +45,11 @@
${CSS_SGM_BASE}/sgm_bl31_setup.c \
${CSS_SGM_BASE}/sgm_plat_config.c
+ifneq (${RESET_TO_BL31},0)
+ $(error "Using BL31 as the reset vector is not supported on ${PLATFORM} platform. \
+ Please set RESET_TO_BL31 to 0.")
+endif
+
# sgm uses CCI-500 as Cache Coherent Interconnect
ARM_CCI_PRODUCT_ID := 500