plat/hikey: boot memory layout to dedicated file
Boot memory layout is specific for a platform, but should not be
mixed up with other platform specific attributes. A separate file is
much cleaner and better to compare with other platforms. Take a look
at plat/poplar where it is done the same way.
Moved hikey_def.h to system include folder and moved includes from
hikey_def.h to more general platform_def.h.
Signed-off-by: Michael Brandl <git@fineon.pw>
diff --git a/plat/hisilicon/hikey/include/hikey_layout.h b/plat/hisilicon/hikey/include/hikey_layout.h
new file mode 100644
index 0000000..637a1c9
--- /dev/null
+++ b/plat/hisilicon/hikey/include/hikey_layout.h
@@ -0,0 +1,122 @@
+/*
+ * Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __HIKEY_LAYOUT_H
+#define __HIKEY_LAYOUT_H
+
+/*
+ * Platform memory map related constants
+ */
+#define XG2RAM0_BASE 0xF9800000
+#define XG2RAM0_SIZE 0x00400000
+
+/*
+ * BL1 is stored in XG2RAM0_HIRQ that is 784KB large (0xF980_0000~0xF98C_4000).
+ */
+#define ONCHIPROM_PARAM_BASE (XG2RAM0_BASE + 0x700)
+#define LOADER_RAM_BASE (XG2RAM0_BASE + 0x800)
+#define BL1_XG2RAM0_OFFSET 0x1000
+
+/*
+ * BL1 specific defines.
+ *
+ * Both loader and BL1_RO region stay in SRAM since they are used to simulate
+ * ROM.
+ * Loader is used to switch Hi6220 SoC from 32-bit to 64-bit mode.
+ *
+ * ++++++++++ 0xF980_0000
+ * + loader +
+ * ++++++++++ 0xF980_1000
+ * + BL1_RO +
+ * ++++++++++ 0xF981_0000
+ * + BL1_RW +
+ * ++++++++++ 0xF989_8000
+ */
+#define BL1_RO_BASE (XG2RAM0_BASE + BL1_XG2RAM0_OFFSET)
+#define BL1_RO_LIMIT (XG2RAM0_BASE + 0x10000)
+#define BL1_RW_BASE (BL1_RO_LIMIT) /* 0xf981_0000 */
+#define BL1_RW_SIZE (0x00088000)
+#define BL1_RW_LIMIT (0xF9898000)
+
+/*
+ * Non-Secure BL1U specific defines.
+ */
+#define NS_BL1U_BASE (0xf9818000)
+#define NS_BL1U_SIZE (0x00010000)
+#define NS_BL1U_LIMIT (NS_BL1U_BASE + NS_BL1U_SIZE)
+
+/*
+ * BL2 specific defines.
+ *
+ * Both loader and BL2 region stay in SRAM.
+ * Loader is used to switch Hi6220 SoC from 32-bit to 64-bit mode.
+ *
+ * ++++++++++ 0xF980_0000
+ * + loader +
+ * ++++++++++ 0xF980_1000
+ * + BL2 +
+ * ++++++++++ 0xF981_8000
+ */
+#define BL2_BASE (BL1_RO_BASE) /* 0xf980_1000 */
+#define BL2_LIMIT (0xF9818000) /* 0xf981_8000 */
+
+/*
+ * SCP_BL2 specific defines.
+ * In HiKey, SCP_BL2 means MCU firmware. It's loaded into the temporary buffer
+ * at 0x0100_0000. Then BL2 will parse the sections and loaded them into
+ * predefined separated buffers.
+ */
+#define SCP_BL2_BASE (DDR_BASE + 0x01000000)
+#define SCP_BL2_LIMIT (SCP_BL2_BASE + 0x00100000)
+#define SCP_BL2_SIZE (SCP_BL2_LIMIT - SCP_BL2_BASE)
+
+/*
+ * BL31 specific defines.
+ */
+#define BL31_BASE (0xF9858000) /* 0xf985_8000 */
+#define BL31_LIMIT (0xF9898000)
+
+/*
+ * BL3-2 specific defines.
+ */
+
+/*
+ * The TSP currently executes from TZC secured area of DRAM or SRAM.
+ */
+#define BL32_SRAM_BASE BL31_LIMIT
+#define BL32_SRAM_LIMIT (BL31_LIMIT+0x80000) /* 512K */
+
+#define BL32_DRAM_BASE DDR_SEC_BASE
+#define BL32_DRAM_LIMIT (DDR_SEC_BASE+DDR_SEC_SIZE)
+
+#ifdef SPD_opteed
+/* Load pageable part of OP-TEE at end of allocated DRAM space for BL32 */
+#define HIKEY_OPTEE_PAGEABLE_LOAD_BASE (BL32_DRAM_LIMIT - HIKEY_OPTEE_PAGEABLE_LOAD_SIZE) /* 0x3FC0_0000 */
+#define HIKEY_OPTEE_PAGEABLE_LOAD_SIZE 0x400000 /* 4MB */
+#endif
+
+#if (HIKEY_TSP_RAM_LOCATION_ID == HIKEY_DRAM_ID)
+#define TSP_SEC_MEM_BASE BL32_DRAM_BASE
+#define TSP_SEC_MEM_SIZE (BL32_DRAM_LIMIT - BL32_DRAM_BASE)
+#define BL32_BASE BL32_DRAM_BASE
+#define BL32_LIMIT BL32_DRAM_LIMIT
+#elif (HIKEY_TSP_RAM_LOCATION_ID == HIKEY_SRAM_ID)
+#define TSP_SEC_MEM_BASE BL32_SRAM_BASE
+#define TSP_SEC_MEM_SIZE (BL32_SRAM_LIMIT - BL32_SRAM_BASE)
+#define BL32_BASE BL32_SRAM_BASE
+#define BL32_LIMIT BL32_SRAM_LIMIT
+#else
+#error "Currently unsupported HIKEY_TSP_LOCATION_ID value"
+#endif
+
+/* BL32 is mandatory in AArch32 */
+#ifndef AARCH32
+#ifdef SPD_none
+#undef BL32_BASE
+#endif /* SPD_none */
+#endif
+
+#endif /* !__HIKEY_LAYOUT_H */