Separate CSS security setup from SOC security setup
Currently, on ARM platforms(ex. Juno) non-secure access to specific
peripheral regions, config registers which are inside and outside CSS
is done in the soc_css_security_setup(). This patch separates the CSS
security setup from the SOC security setup in the css_security_setup().
The CSS security setup involves programming of the internal NIC to
provide access to regions inside the CSS. This is needed only in
Juno, hence Juno implements it in its board files as css_init_nic400().
Change-Id: I95a1fb9f13f9b18fa8e915eb4ae2f15264f1b060
diff --git a/plat/arm/board/juno/juno_security.c b/plat/arm/board/juno/juno_security.c
index 1de38c3..f9386ca 100644
--- a/plat/arm/board/juno/juno_security.c
+++ b/plat/arm/board/juno/juno_security.c
@@ -29,6 +29,7 @@
*/
#include <mmio.h>
+#include <nic_400.h>
#include <plat_arm.h>
#include <soc_css.h>
#include "juno_def.h"
@@ -48,12 +49,25 @@
}
/*******************************************************************************
+ * Program CSS-NIC400 to allow non-secure access to some CSS regions.
+ ******************************************************************************/
+static void css_init_nic400(void)
+{
+ /* Note: This is the NIC-400 device on the CSS */
+ mmio_write_32(PLAT_SOC_CSS_NIC400_BASE +
+ NIC400_ADDR_CTRL_SECURITY_REG(CSS_NIC400_SLAVE_BOOTSECURE),
+ ~0);
+}
+
+/*******************************************************************************
* Initialize the secure environment.
******************************************************************************/
void plat_arm_security_setup(void)
{
/* Initialize the TrustZone Controller */
arm_tzc_setup();
+ /* Do ARM CSS internal NIC setup */
+ css_init_nic400();
/* Do ARM CSS SoC security setup */
soc_css_security_setup();
/* Initialize the SMMU SSD tables*/
diff --git a/plat/arm/soc/common/soc_css_security.c b/plat/arm/soc/common/soc_css_security.c
index 36f59ea..37fd37c 100644
--- a/plat/arm/soc/common/soc_css_security.c
+++ b/plat/arm/soc/common/soc_css_security.c
@@ -30,17 +30,10 @@
#include <board_css_def.h>
#include <mmio.h>
+#include <nic_400.h>
#include <platform_def.h>
#include <soc_css_def.h>
-/*
- * Address of slave 'n' security setting in the NIC-400 address region
- * control
- * TODO: Ideally this macro should be moved in a "nic-400.h" header file but
- * it would be the only thing in there so it's not worth it at the moment.
- */
-#define NIC400_ADDR_CTRL_SECURITY_REG(n) (0x8 + (n) * 4)
-
void soc_css_init_nic400(void)
{
/*
@@ -70,13 +63,6 @@
NIC400_ADDR_CTRL_SECURITY_REG(SOC_CSS_NIC400_BOOTSEC_BRIDGE),
~SOC_CSS_NIC400_BOOTSEC_BRIDGE_UART1);
- /*
- * Allow non-secure access to some CSS regions.
- * Note: This is the NIC-400 device on the CSS
- */
- mmio_write_32(PLAT_SOC_CSS_NIC400_BASE +
- NIC400_ADDR_CTRL_SECURITY_REG(CSS_NIC400_SLAVE_BOOTSECURE),
- ~0);
}