diff --git a/drivers/arm/gic/v2/gicv2_helpers.c b/drivers/arm/gic/v2/gicv2_helpers.c
index 2693076..0df50fb 100644
--- a/drivers/arm/gic/v2/gicv2_helpers.c
+++ b/drivers/arm/gic/v2/gicv2_helpers.c
@@ -9,6 +9,7 @@
 #include <assert.h>
 #include <debug.h>
 #include <gic_common.h>
+#include <interrupt_props.h>
 #include "../common/gic_common_private.h"
 #include "gicv2_private.h"
 
@@ -112,6 +113,7 @@
 		gicd_write_icfgr(gicd_base, index, 0);
 }
 
+#if !ERROR_DEPRECATED
 /*******************************************************************************
  * Helper function to configure secure G0 SPIs.
  ******************************************************************************/
@@ -145,8 +147,50 @@
 	}
 
 }
+#endif
 
 /*******************************************************************************
+ * Helper function to configure properties of secure G0 SPIs.
+ ******************************************************************************/
+void gicv2_secure_spis_configure_props(uintptr_t gicd_base,
+		const interrupt_prop_t *interrupt_props,
+		unsigned int interrupt_props_num)
+{
+	unsigned int i;
+	const interrupt_prop_t *prop_desc;
+
+	/* Make sure there's a valid property array */
+	assert(interrupt_props_num != 0 ? (uintptr_t) interrupt_props : 1);
+
+	for (i = 0; i < interrupt_props_num; i++) {
+		prop_desc = &interrupt_props[i];
+
+		if (prop_desc->intr_num < MIN_SPI_ID)
+			continue;
+
+		/* Configure this interrupt as a secure interrupt */
+		assert(prop_desc->intr_grp == GICV2_INTR_GROUP0);
+		gicd_clr_igroupr(gicd_base, prop_desc->intr_num);
+
+		/* Set the priority of this interrupt */
+		gicd_set_ipriorityr(gicd_base, prop_desc->intr_num,
+				prop_desc->intr_pri);
+
+		/* Target the secure interrupts to primary CPU */
+		gicd_set_itargetsr(gicd_base, prop_desc->intr_num,
+				gicv2_get_cpuif_id(gicd_base));
+
+		/* Set interrupt configuration */
+		gicd_set_icfgr(gicd_base, prop_desc->intr_num,
+				prop_desc->intr_cfg);
+
+		/* Enable this interrupt */
+		gicd_set_isenabler(gicd_base, prop_desc->intr_num);
+	}
+}
+
+#if !ERROR_DEPRECATED
+/*******************************************************************************
  * Helper function to configure secure G0 SGIs and PPIs.
  ******************************************************************************/
 void gicv2_secure_ppi_sgi_setup(uintptr_t gicd_base,
@@ -193,3 +237,66 @@
 	/* Enable the Group 0 SGIs and PPIs */
 	gicd_write_isenabler(gicd_base, 0, sec_ppi_sgi_mask);
 }
+#endif
+
+/*******************************************************************************
+ * Helper function to configure properties of secure G0 SGIs and PPIs.
+ ******************************************************************************/
+void gicv2_secure_ppi_sgi_setup_props(uintptr_t gicd_base,
+		const interrupt_prop_t *interrupt_props,
+		unsigned int interrupt_props_num)
+{
+	unsigned int i;
+	uint32_t sec_ppi_sgi_mask = 0;
+	const interrupt_prop_t *prop_desc;
+
+	/* Make sure there's a valid property array */
+	assert(interrupt_props_num != 0 ? (uintptr_t) interrupt_props : 1);
+
+	/*
+	 * Disable all SGIs (imp. def.)/PPIs before configuring them. This is a
+	 * more scalable approach as it avoids clearing the enable bits in the
+	 * GICD_CTLR.
+	 */
+	gicd_write_icenabler(gicd_base, 0, ~0);
+
+	/* Setup the default PPI/SGI priorities doing four at a time */
+	for (i = 0; i < MIN_SPI_ID; i += 4)
+		gicd_write_ipriorityr(gicd_base, i, GICD_IPRIORITYR_DEF_VAL);
+
+	for (i = 0; i < interrupt_props_num; i++) {
+		prop_desc = &interrupt_props[i];
+
+		if (prop_desc->intr_num >= MIN_SPI_ID)
+			continue;
+
+		/* Configure this interrupt as a secure interrupt */
+		assert(prop_desc->intr_grp == GICV2_INTR_GROUP0);
+
+		/*
+		 * Set interrupt configuration for PPIs. Configuration for SGIs
+		 * are ignored.
+		 */
+		if ((prop_desc->intr_num >= MIN_PPI_ID) &&
+				(prop_desc->intr_num < MIN_SPI_ID)) {
+			gicd_set_icfgr(gicd_base, prop_desc->intr_num,
+					prop_desc->intr_cfg);
+		}
+
+		/* We have an SGI or a PPI. They are Group0 at reset */
+		sec_ppi_sgi_mask |= (1u << prop_desc->intr_num);
+
+		/* Set the priority of this interrupt */
+		gicd_set_ipriorityr(gicd_base, prop_desc->intr_num,
+				prop_desc->intr_pri);
+	}
+
+	/*
+	 * Invert the bitmask to create a mask for non-secure PPIs and SGIs.
+	 * Program the GICD_IGROUPR0 with this bit mask.
+	 */
+	gicd_write_igroupr(gicd_base, 0, ~sec_ppi_sgi_mask);
+
+	/* Enable the Group 0 SGIs and PPIs */
+	gicd_write_isenabler(gicd_base, 0, sec_ppi_sgi_mask);
+}
diff --git a/drivers/arm/gic/v2/gicv2_main.c b/drivers/arm/gic/v2/gicv2_main.c
index 59b6632..25296a6 100644
--- a/drivers/arm/gic/v2/gicv2_main.c
+++ b/drivers/arm/gic/v2/gicv2_main.c
@@ -10,6 +10,7 @@
 #include <debug.h>
 #include <gic_common.h>
 #include <gicv2.h>
+#include <interrupt_props.h>
 #include <spinlock.h>
 #include "../common/gic_common_private.h"
 #include "gicv2_private.h"
@@ -73,11 +74,21 @@
 {
 	assert(driver_data);
 	assert(driver_data->gicd_base);
-	assert(driver_data->g0_interrupt_array);
 
-	gicv2_secure_ppi_sgi_setup(driver_data->gicd_base,
-					driver_data->g0_interrupt_num,
-					driver_data->g0_interrupt_array);
+#if !ERROR_DEPRECATED
+	if (driver_data->interrupt_props != NULL) {
+#endif
+		gicv2_secure_ppi_sgi_setup_props(driver_data->gicd_base,
+				driver_data->interrupt_props,
+				driver_data->interrupt_props_num);
+#if !ERROR_DEPRECATED
+	} else {
+		assert(driver_data->g0_interrupt_array);
+		gicv2_secure_ppi_sgi_setup(driver_data->gicd_base,
+				driver_data->g0_interrupt_num,
+				driver_data->g0_interrupt_array);
+	}
+#endif
 }
 
 /*******************************************************************************
@@ -91,7 +102,6 @@
 
 	assert(driver_data);
 	assert(driver_data->gicd_base);
-	assert(driver_data->g0_interrupt_array);
 
 	/* Disable the distributor before going further */
 	ctlr = gicd_read_ctlr(driver_data->gicd_base);
@@ -101,10 +111,22 @@
 	/* Set the default attribute of all SPIs */
 	gicv2_spis_configure_defaults(driver_data->gicd_base);
 
-	/* Configure the G0 SPIs */
-	gicv2_secure_spis_configure(driver_data->gicd_base,
-					driver_data->g0_interrupt_num,
-					driver_data->g0_interrupt_array);
+#if !ERROR_DEPRECATED
+	if (driver_data->interrupt_props != NULL) {
+#endif
+		gicv2_secure_spis_configure_props(driver_data->gicd_base,
+				driver_data->interrupt_props,
+				driver_data->interrupt_props_num);
+#if !ERROR_DEPRECATED
+	} else {
+		assert(driver_data->g0_interrupt_array);
+
+		/* Configure the G0 SPIs */
+		gicv2_secure_spis_configure(driver_data->gicd_base,
+				driver_data->g0_interrupt_num,
+				driver_data->g0_interrupt_array);
+	}
+#endif
 
 	/* Re-enable the secure SPIs now that they have been configured */
 	gicd_write_ctlr(driver_data->gicd_base, ctlr | CTLR_ENABLE_G0_BIT);
@@ -120,19 +142,26 @@
 	assert(plat_driver_data->gicd_base);
 	assert(plat_driver_data->gicc_base);
 
-	/*
-	 * The platform should provide a list of atleast one type of
-	 * interrupts
-	 */
-	assert(plat_driver_data->g0_interrupt_array);
+#if !ERROR_DEPRECATED
+	if (plat_driver_data->interrupt_props == NULL) {
+		/* Interrupt properties array size must be 0 */
+		assert(plat_driver_data->interrupt_props_num == 0);
 
-	/*
-	 * If there are no interrupts of a particular type, then the number of
-	 * interrupts of that type should be 0 and vice-versa.
-	 */
-	assert(plat_driver_data->g0_interrupt_array ?
-	       plat_driver_data->g0_interrupt_num :
-	       plat_driver_data->g0_interrupt_num == 0);
+		/* The platform should provide a list of secure interrupts */
+		assert(plat_driver_data->g0_interrupt_array);
+
+		/*
+		 * If there are no interrupts of a particular type, then the
+		 * number of interrupts of that type should be 0 and vice-versa.
+		 */
+		assert(plat_driver_data->g0_interrupt_array ?
+				plat_driver_data->g0_interrupt_num :
+				plat_driver_data->g0_interrupt_num == 0);
+	}
+#else
+	assert(plat_driver_data->interrupt_props != NULL);
+	assert(plat_driver_data->interrupt_props_num > 0);
+#endif
 
 	/* Ensure that this is a GICv2 system */
 	gic_version = gicd_read_pidr2(plat_driver_data->gicd_base);
diff --git a/drivers/arm/gic/v2/gicv2_private.h b/drivers/arm/gic/v2/gicv2_private.h
index 70f0597..25600de 100644
--- a/drivers/arm/gic/v2/gicv2_private.h
+++ b/drivers/arm/gic/v2/gicv2_private.h
@@ -15,12 +15,20 @@
  * Private function prototypes
  ******************************************************************************/
 void gicv2_spis_configure_defaults(uintptr_t gicd_base);
+#if !ERROR_DEPRECATED
 void gicv2_secure_spis_configure(uintptr_t gicd_base,
 				     unsigned int num_ints,
 				     const unsigned int *sec_intr_list);
 void gicv2_secure_ppi_sgi_setup(uintptr_t gicd_base,
 					unsigned int num_ints,
 					const unsigned int *sec_intr_list);
+#endif
+void gicv2_secure_spis_configure_props(uintptr_t gicd_base,
+		const interrupt_prop_t *interrupt_props,
+		unsigned int interrupt_props_num);
+void gicv2_secure_ppi_sgi_setup_props(uintptr_t gicd_base,
+		const interrupt_prop_t *interrupt_props,
+		unsigned int interrupt_props_num);
 unsigned int gicv2_get_cpuif_id(uintptr_t base);
 
 /*******************************************************************************